S PEC F ILE
Zoom Lens
This zoom lens is designed for use with Panasonic’s applicable projectors. The lens makes it possible to vary the
projection distance by changing the focal distance.
NOTE: Please use the lens only on the specified Panasonic projector.
Specifications
F value: 2.5
Focal distance (f): 19.63 –23.54 mm
Throw ratio: 0.9–1.1:1 for PT-DZ21K/DZ8700/DZ110X (16:10 aspect ratio),
1.0– 1.2:1 for PT-DS20K/DS8500/DS100X (4:3 aspect ratio),
1.0–1.2:1 for PT-DW17K/DW8300/DW90X (16:9 aspect atio)
Dimensions (W × H × D): 160 × 160 × 356.5 mm (6-5/16 × 6-5/16 × 14-1/32 inches)
Weight: Approximately 8.7 kg* (19.2 lbs*)
Applicable projector
The throw ratio is an approximate value calculated by dividing the screen width by the projection distance.
[Group A]
PT-DZ21K/DZ21K2/DS20K/DS20K2/DW17K/DW17K2/DZ16K/DZ16K2
[Group B]
PT-DZ13K/DS12K/DW11K/DZ10K/DZ8700/DZ110K/DS8500/DS1100K/DW8300/DW90K
[Group C]
PT-RZ12K/RS11K
PT-RQ13K
*Average value. May differ depending on the actual unit.
ET-D75LE6
Dimensions
∅160 (6-5/16)
356.5 (14-1/32)
NOTE: Please read the projector’s instruction manual for throw distances.
Weights and dimensions shown are approximate. Specifications subject to change without notice.
As of December 2015
SFD10A006-3
NOTE: This illustration is not drawn to scale.
unit : mm (inch)
1/2
S PEC F ILE
Zoom Lens
[Group A]
[Group B]
212
(8-3/4)
ET-D75LE6
730
(28-7/8)
212
(8-11/32)
[Group C]
212
(8-11/32)
NOTE: Please read the projector’s instruction manual for throw distances.
Weights and dimensions shown are approximate. Specifications subject to change without notice.
540
(21-1/4)
725
(28-17/32)
NOTE: This illustration is not drawn to scale.
unit : mm (inch)
SFD10A006-3
2/2As of December 2015