Intended use ����������������������������������������8
Parts identication ������������������������������9
Charging the shaver ���������������������������� 9
Using the shaver��������������������������������11
Troubleshooting ��������������������������������15
Battery life ������������������������������������������ 16
Before operating this unit, please read these instructions completely and save them for future use.
3
Safety precautions
English
To reduce the risk of injury, loss of life, electric shock, fire, and
damage to property, always observe the following safety
precautions.
Explanation of symbols
The following symbols are used to classify and describe the level
of hazard, injury, and property damage caused when the
denotation is disregarded and improper use is performed.
Denotes a potential
DANGER
WARNING
CAUTION
The following symbols are used to classify and describe the type
of instructions to be observed.
This symbol is used to alert users to a specific operating
procedure that must not be performed.
This symbol is used to alert users to a specific operating
procedure that must be followed in order to operate the
unit safely.
hazard that will result in
serious injury or death.
Denotes a potential
hazard that could result
in serious injury or death.
Denotes a hazard that
could result in minor
injury.
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic
precautions should always be followed, including
the following:
Read all instructions before using this appliance.
DANGER
1. Do not reach for an appliance that has fallen
into water. Unplug immediately.
2. Do not place or store appliance where it can fall
or be pulled into a tub or sink. Do not place in
or drop into water or other liquid.
3. Except when charging, always unplug this
appliance from the electrical outlet immediately
after using.
4. Unplug this appliance before cleaning.
WARNING
1. Close supervision is necessary when this
appliance is used by, on, or near children or
invalids.
2. Use this appliance only for its intended use as
described in this manual. Do not use
attachments not recommended by the
manufacturer.
To reduce the risk of electric
shock:
To reduce the risk of burns, fire,
electric shock, or injury to persons:
4
3. Never operate this appliance when it has a
damaged cord or plug, when it is not working
properly, after it has been dropped or damaged,
or after it has been dropped into water. Return
the appliance to a service center for
examination and repair.
4. Keep the cord away from heated surfaces.
5. Never drop or insert any object into any
opening.
6. Do not use outdoors or operate where aerosol
(spray) products are being used or where
oxygen is being administered.
7. Do not use this appliance with damaged
shaving blades and/or foil, as it has the
potential to result in facial injury.
8. Always attach plug to appliance first, then to
outlet. To disconnect, turn all controls to “off”
then remove plug from outlet.
SAVE THESE INSTRUCTIONS
WARNING
This shaver has a built-in rechargeable battery. Do
not throw into fire, apply heat, or charge, use, or
leave in a high temperature environment.
- Doing so may cause overheating, ignition, or explosion.
Do not connect or disconnect the adaptor to a
household outlet with a wet hand.
- Doing so may cause electric shock or injury.
Never disassemble except when disposing of the
product.
- Doing so may cause fire, electric shock, or injury.
Do not use anything other than the supplied AC
adaptor. Also, do not charge any other product with
the supplied AC adaptor.
- Doing so may cause burn or fire due to a short circuit.
Do not modify or repair.
- Doing so may cause fire, electric shock, or injury.
Contact an authorized service center for repair (battery
change etc).
Do not store within reach of children or infants. Do
not let them use it.
- Putting the inner blades, the cleaning brush and/or the oil
container in the mouth may cause accidents and injury.
Do not damage, modify, or forcibly bend, pull, or
twist the cord.
Also, do not place anything heavy on or pinch the
cord.
- Doing so may cause electric shock or fire due to a short
circuit.
English
5
English
WARNING
Do not use in a way exceeding the rating of the
household outlet or the wiring.
- Exceeding the rating by connecting too many plugs to one
household outlet may cause fire due to overheating.
Always ensure the appliance is operated on an
electric power source matched to the rated voltage
indicated on the AC adaptor.
Fully insert the power plug.
- Failure to do so may cause fire or electric shock.
Regularly clean the power plug and the appliance
plug to prevent dust from accumulating.
- Failure to do so may cause fire due to insulation failure
caused by humidity.
Disconnect the adaptor and wipe with a dry cloth.
Immediately stop using and remove the adaptor if
there is an abnormality or malfunction.
- Using it in such conditions may cause fire, electric shock,
or injury.
<Abnormality or malfunction cases>
• The main unit, adaptor or cord is deformed or
abnormally hot.
• The main unit, adaptor or cord has burning smell.
• There is abnormal sound during use or charging of
the main unit, adaptor or cord.
- Immediately request inspection or repair at an authorized
service center.
If oil is consumed accidentally, do not induce
vomiting, drink a large amount of water and contact
a physician.
If oil comes into contact with eyes, wash
immediately and thoroughly with running water and
contact a physician.
- Failure to follow these instructions may result in physical
problems.
This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning use of the
appliance by a person responsible for their safety.
Children should be supervised to ensure that they
do not play with the appliance.
- Failure to do so may cause an accident or injury.
The supply cord cannot be replaced. If the cord is
damaged, the AC adaptor should be discarded.
- Failure to do so may cause an accident or injury.
CAUTION
Do not allow pins or trash to adhere to the power
plug or the appliance plug.
- Doing so may cause electric shock or fire due to a short
circuit.
6
CAUTION
Do not use excessive pressure to apply the system
outer foil to your lip or other part of your face. Do
not apply the system outer foil directly to blemishes
or injured skin.
- Doing so may cause injury to the skin.
Do not forcefully press the system outer foil. Also,
do not touch the system outer foil with fingers or
nails when in use.
- Doing so may cause injury to skin or reduce the life of the
system outer foil.
Do not touch the blade section (metallic section) of
the inner blade.
- Doing so may cause injury to your hands.
Do not use this product for hair on head or any
other part of the body.
- Doing so may cause injury to skin or reduce the life of the
system outer foil.
Do not share your shaver with your family or other
people.
- Doing so may result in infection or inflammation.
Do not wrap the cord around the adaptor when
storing.
- Doing so may cause the wire in the cord to break with the
load, and may cause fire due to a short circuit.
Check the system outer foil for cracks or
deformations before use.
- Failure to do so may cause injury to the skin.
Be sure to place the protective cap on the shaver
when carrying around or storing.
- Failure to do so may cause injury to skin or reduce the life
of the system outer foil.
Disconnect the adaptor or the appliance plug by
holding onto the adaptor or the appliance plug
instead of the cord.
- Failure to do so may cause electric shock or injury.
►Disposing of the rechargeable battery
DANGER
The rechargeable battery is exclusively for use with
this shaver. Do not use the battery with other
products.
Do not charge the battery after it has been removed
from the product.
• Do not throw into fire or apply heat.
• Do not hit, disassemble, modify, or puncture with a
nail.
• Do not let the positive and negative terminals of
the battery get in contact with each other through
metallic objects.
• Do not carry or store the battery together with
metallic jewelry such as necklaces and hairpins.
• Do not charge, use, or leave the battery where it
will be exposed to high temperatures, such as
under direct sunlight or near other sources of heat.
• Never peel off the tube.
- Doing so may cause overheating, ignition, or explosion.
English
7
English
WARNING
After removing the rechargeable battery, do not
keep it within reach of children and infants.
- The battery will harm the body if accidentally swallowed.
If this happens, consult a physician immediately.
If the battery fluid leaks out, take the following
procedures. Do not touch the battery with your bare
hands.
- The battery fluid may cause blindness if it comes in
contact with your eyes.
Do not rub your eyes. Wash immediately with clean water
and consult a physician.
- The battery fluid may cause inflammation or injury if it
comes in contact with the skin or clothes.
Wash it off thoroughly with clean water and consult a
physician.
Intended use
• This WET/DRY shaver can be used for wet shaving using
shaving lather or for dry shaving. You can use this watertight
shaver in the shower and clean with water. The following symbol
means suitable for use in a bath or shower.
►Notes
• Treat yourself to wet lather shaves for at least three weeks and
notice the difference. Your Panasonic WET/DRY shaver requires
a little time to get used to because your skin and beard need
about a month to adjust to any new shaving method.
• Keep both the inner blades inserted. If only one of the inner
blades is inserted, the shaver may be damaged.
• If you clean the shaver with water, do not use salt water or hot
water. Do not soak the shaver in water for a long period of time.
• Clean the housing only with a soft cloth slightly dampened with
tap water or soapy tap water. Do not use thinner, benzine,
alcohol or other chemicals.
• Store the shaver in a place with low humidity after use.
• Do not store the shaver where it will be exposed to direct sunlight
or other heat sources.
8
Parts identification
Front
Back
ES-RT77/ES-RT47
A Main body
1 Protective cap
2 System outer foil
3 Foil frame
4 Foil frame release buttons
5 Thumb rest
6 Power switch
7 Switch on lamp
E Comb
F Trimming height window
Comb attachment release
)
buttons
H Trimming height switch
button
Accessories
D Travel pouch
ES-RT77/ES-RT67/ES-RT37
E Oil
ES-RT77/ES-RT47
English
ES-RT77/ES-RT67
ES-RT47/ES-RT37
ES-RT77/ES-RT67/ES-RT37
ES-RT77/ES-RT47
Charging the shaver
Insert the appliance plug into
1
1
the shaver.
• Turn the shaver off before inserting.
Plug in the adaptor into a
2
2
household outlet.
• Wipe off any water droplets on the
appliance socket.
Disconnect the adaptor after charging is
3
3
completed.
• Charging is completed after approx. 1 hour.
The charging time may differ with the charging capacity.
1
2
9
• Charging the battery for more than 1 hour will not affect
English
battery performance.
• Top‑up charging will not cause reductions in battery
performance.
• If the shape of the plug does not fit the power outlet, use an
attachment plug adaptor of the proper configuration.
Note
You cannot operate the shaver while charging.
While charging
ES-RT77/ES-RT67ES-RT47/ES-RT37
The charge status lamp ( )
glows.
The number of the battery
capacity lamp will increase as
charging progresses.
After charging is completed
ES-RT77/ES-RT67ES-RT47/ES-RT37
The charge status lamp ( )
glows.
ES-RT77/ES-RT67ES-RT47/ES-RT37
The charge status lamp ( ) blinks twice every second.
• After charging is completed, turning the power switch ON with
the shaver plugged in will cause the charge status lamp (
light up and then turn off after 5 seconds.
This shows that the shaver is fully charged.
• Recommended ambient temperature for charging is 10 – 35 °C
(50 – 95 °F). It may take longer to charge or the battery may fail
to charge properly in extremely high or low temperatures.
Charge the shaver within the recommended ambient temperature
range.
• When charging the shaver for the first time or when it has not
been in use for more than 6 months, the charging time may
change or the charge status lamp ( ) may not glow for a few
minutes. It will eventually glow if kept connected.
Abnormal charging
) to
All the battery capacity lamps
light up for 5 seconds and
then all lamps turn off.
10
The charge status lamp (
turns off.
)
Using the shaver
• Do not place your fingers on the power switch while using the
shaver. This may cause the shaver to turn off. Place your fingers
on the thumb rest while using the shaver.
• We recommend using the shaver in an ambient temperature
range of 5 – 35 °C (41 – 95 °F). If used outside this range, the
appliance may stop operating.
Press the power switch.
1
1
• The switch on lamp glows.
Hold the shaver as illustrated
2
2
and shave.
• Start shaving by applying gentle
pressure to your face. Stretch your
skin with your free hand and move the
shaver back and forth in the direction
of your beard. You may gently increase
the amount of pressure as your skin
becomes accustomed to this shaver.
Applying excessive pressure does not
provide a closer shave.
ES-RT77/ES-RT67
Using the trimmer
►Trimming sideburns
Slide the trimmer handle up. Turn the
shaver on and place at a right angle to
your skin and move downwards to trim
your sideburns.
• Press and hold the lock release button
and slide the trimmer handle down to
lower the trimmer.
►Pre-shave
The trimmer can be used
for a pre‑shave of long
beards.
►Above the lips
Turn the shaver on and place at a right
angle to your skin and trim around your
moustache.
English
11
►Trimming the edge of beard
English
Cut your beard gradually
with the power switch facing
opposite side of your skin,
taking care not to cut too
much.
Using the comb attachment
Note
Apply the oil to the trimmer before and after each use. (See
page 14.)
Failure to apply the oil may cause the following problems due to
rust, wear or burn out.
- The trimmer has become blunt.
- Shorter operating time.
- Louder sound.
Make sure that the shaver is turned off.
Mount the comb
1
1
attachment to the main
body until it clicks.
• Press and hold the comb
attachment release buttons to
remove.
Slide the trimmer handle
2
2
up until it clicks.
ES-RT77/ES-RT47
While pressing and
3
3
holding the trimming
height switch button, move
the comb vertically to the
desired trimming length
(between 1 mm (1/32˝) and
7 mm (9/32˝)).
Trimming
height
(approx.)
Indicator1.0 2.5 4.0 5.5 7.0
• Actual hair length will be a little
longer than the height you set.
Lightly push the comb
4
4
attachment to ensure that
it has locked into place.
Turn the shaver on, bring the comb of the
5
5
comb attachment into contact with the skin,
and cut the beard by moving the trimmer back
against the flow of the beard.
mm 1.0 2.5 4.0 5.5 7.0
1/32 3/32 5/32 7/32 9/32
inch
12
Notes
• Be careful not to cut your hand on the blade when attaching
and removing the comb attachment.
• Do not use with shaving creams applied or when the beard is
wet. Wet beard can stick to the skin or clump making it difficult
for the blade to cut.
• Comb beard and sideburns before trimming.
• Hair trimmings may collect inside the comb attachment when a
large volume of beard is cut, so discard hair trimmings after each
use.
• If the comb attachment is not attached properly, it may become
loose during use resulting in excessive cutting.
Reading lamps when using
ES-RT77/ES-RT67ES-RT47/ES-RT37
Approximate amount of
battery charge is displayed as
20 – 100.
• It turns off after
approximately 5 seconds.
During use
All lamps disappear while
using.
ES-RT77/ES-RT67ES-RT47/ES-RT37
“20” blinks for 5 seconds when
the power switch is pressed.
• You can shave 2 to 3 times after “20” blinks. (This will differ
depending on usage.)
• You can shave 2 to 3 times after the battery capacity lamp blinks.
(This will differ depending on usage.)
• A full charge will supply enough power for approx. 18 shaves of 3
minutes each. (This will differ depending on usage.)
When the battery capacity is low
The battery capacity lamp
blinks for 5 seconds when the
power switch is pressed.
ES-RT77/ES-RT67
ES-RT47/ES-RT37
Cleaning the shaver
1. Disconnect the cord from the shaver.
2. Apply some hand soap and some water to the system outer
foil.
3. Turn the shaver on.
4. Turn off the shaver after 10 to 20
seconds.
English
13
5. Remove the outer foil section.
English
6. Clean the shaver, the outer foil
section, the trimmer, and the comb
attachment with running water.
7. Wipe off any drops of water with a dry cloth.
8. Dry the outer foil section, the shaver,
the trimmer, and the comb
attachment completely.
9. Attach the outer foil section to the shaver.
10
. Lubricate the shaver.
Lubrication
(Oil included for ES-RT77/ES-RT47)
To maintain shaving comfort for a long time, it is recommended
that the oil provided with the shaver is used.
1. Switch off the shaver.
2. Apply one drop of oil to each
system outer foil.
3. Raise the trimmer and apply one
drop of oil.
4. Switch the shaver on, and run it for
approximately five seconds.
5. Switch off the shaver, and wipe off any excess oil from the
system outer foil with a soft cloth.
Replacing the system outer foil and the inner blades
system outer foilonce every year
inner bladesonce every two years
►Removing the outer foil section
Press the foil frame release buttons and lift the
outer foil section upwards.
►Attaching the outer foil section
Securely attach the outer foil section to the shaver
until it clicks.
14
►Replacing the system outer foil
1. Press the system outer foil release
buttons and pull down the system outer
foil.
2. Insert the system outer foil until it clicks.
• Always attach the system outer foil in
proper direction.
• Always insert the system outer foil to the
foil frame when attaching to the shaver.
►Replacing the inner blades
1. Remove the inner blades one at a time.
• Do not touch the edges (metal parts) of the inner
blades to prevent injury to your hand.
2. Insert the inner blades one at a time until they click.
►Replacement parts
Replacement parts are available at your dealer or Service Center.
Replacement parts for
ES‑RT77/ES‑RT67/
ES‑RT47/ES‑RT37
System outer foil and inner
blades
System outer foilWES9087
Inner bladesWES9068
WES9013
Troubleshooting
ProblemAction
This can be improved by cleaning
Shavings fly all over.
every time after shaving.
Clean the inner blades.
ProblemAction
Apply oil.
(See page 14.)
System outer foil gets hot.
Operating time is short
even after charging.
Makes a loud sound.
The odor is getting
stronger.
You do not get as close a
shave as before.
Replace the system outer foil if it
is damaged or deformed.
(See this page.)
Apply oil.
When the number of operations
per charge starts to decrease, the
battery is nearing the end of its
life.
Apply oil.
Confirm that the blades are
properly attached.
Clean the system outer foil.
This can be improved by cleaning
every time after shaving.
This can be improved by cleaning
every time after shaving.
Replace the system outer foil and/
or inner blades.
Expected life of system outer foil
and inner blades:
System outer foil:
Inner blades:
Apply oil.
English
Approximately 1 year
Approximately 2 years
15
English
If the problems still cannot be solved, contact the store where you
purchased the unit or a service center authorized by Panasonic for
repair.
ProblemAction
Recommended ambient
temperature for operation is
5 – 35 °C (41 – 95 °F). The
Shaver stopped
functioning.
shaver may stop functioning when
out of recommended ambient
temperature range.
The battery has reached the end
of its life.
Battery life
The life of the battery is 3 years. The battery in this shaver is not
intended to be replaced by consumers.
Removing the built-in rechargeable battery
ATTENTION:
A lithium ion battery that is recyclable powers the product you
have purchased. Please call 1‑800‑8‑BATTERY for information
on how to recycle this battery.
This figure must only be used when disposing of the shaver, and
must not be used to repair it. If you dismantle the shaver yourself,
it will no longer be waterproof, which may cause it to malfunction.
• Remove the shaver from the AC adaptor.
• Press the power switch to turn on the power and then keep the
power on until the battery is completely discharged.
• Perform steps 1 to 5 and lift the battery, and then remove it.
• Please take care not to short‑circuit the battery.
Specifications
Remove the built-in rechargeable battery before disposing of
the shaver.
16
Power source
Motor voltage
Charging timeApprox. 1 hour
This product is intended for household use only.
See the name plate on the AC adaptor.
(Automatic voltage conversion)
3.6 V
Loading...
+ 36 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.