PANASONIC ECHUX 1N 16 Datasheet

Stacked Metallized PPS Film
Chip Capacitor

Type : ECHU(X)

Stacked metallized PPS fi lm as dielectric with simple
mold-less construction

Features

●

Small in size (Minimum size 1.6 mm × 0.8 mm)

●

85 °C, 85 %RH, W.V. × 1.0 for 500 hours

●

For refl ow soldering

●

RoHS directive compliant

Recommended applications

●

Time-constant

●

Filtering

●

Oscillation and resonance

●

Audio circuit

Explanation of part number

1 2 3 4 5 6 7 8 9 10 11 12

Plastic Film Capacitors

E C H U X

Product code Dielectric &

construction

Rated voltage Cap. Tol. SuffixSuffixCapacitance

1C

1H

16 V.DC

50 V.DC

±2 %

G

±5 %

J

Code

5

9

Tape width

8 mm

12 mm

Speci cations

Category temp. range

(Including temperature-rise on unit surface)

Rated voltage

Capacitance range

(50 V.DC : 0.12 F or more : Derating or rated voltage by 1.25 % / °C at more than 105 °C)

16 V.DC 0.00010 µF to 0.10 µF (E12)
50 V.DC 0.00010 µF to 0.22 µF (E12)

Capacitance tolerance ±2 %(G), ±5 %(J)

Dissipation factor (tan d) tan d < 0.6 % (20 °C, 1 kHz)

Withstand voltage Between terminals : Rated volt. (V.DC)×150 %, 60 s

Insulation resistance (IR)

Soldering conditions

Please consult us for fl ow soldering

✽

In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage,

✽

please refer to the page of “Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage”.

Refl ow soldering : 260 °C max. and 95 sec max. at more than 220 °C (Temp. at capacitor surface)

16 V.DC : IR > 3000 MΩ (20 °C, 10 V.DC, 60 s)
50 V.DC : IR > 3000 MΩ (20 °C, 50 V.DC, 60 s)

– 55 °C to +125 °C

16 V.DC, 50 V.DC

Construction Dimensions

(±0.3)

✽ ✽ ✽

(±0.15)

W±0.2

✽ ✽

H±0.2

Element
(Stacked)

Outer electrode

L±0.2

e±0.30

✽

(±0.25)
(±0.20)

✽ ✽

✽

To be applied only for size code J1, J2

✽✽ To be applied only for size code K1
✽✽✽ To be applied only for size code E1, E2, D1, D3, D4

e±0.30

g

(±0.25)
(±0.20)

✽
✽ ✽

Reel diameter

f180 mm

f330 mm

Size code

LWHe g

K1 1.6 0.8 0.7 0.35

J1 2.0 1.25 0.9 0.45
J2 2.0 1.25 1.1 0.45

H1 3.2 1.6 0.9 0.65

✽ ✽

H2 3.2 1.6 1.1 0.65
H3 3.2 1.6 1.5 0.65
G1 3.2 2.5 1.1 0.65

(±0.15)

G2 3.2 2.5 1.5 0.65
G3 3.2 2.5 2.1 0.65

E1 4.8 3.3 1.5 0.80

E2 4.8 3.3 2.1 0.80
D1 6.0 4.1 1.9 0.80
D3 6.0 4.1 2.5 0.80
D4 6.0 4.1 2.8 0.80

✽ Tape width 8 mm
and diameter
f330 mm reel is
prepared

Unit : mm

> 0.4
> 0.6
> 0.6
> 1.0
> 1.0
> 1.0
> 1.0
> 1.0
> 1.0
> 2.0
> 2.0
> 2.0
> 2.0
> 2.0

Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.

Sep. 201702

Plastic Film Capacitors

Taping sp eci cation for automatic mounting

Refer to the page of taping specifi cations

Rating · Dimensions · Quantity

●

Capacitance tolerance : ±2 %(G), ±5 %(J)

Capacitance

(µF)

Part No.

0.00010 ECHU1C101◻X5 1.6 0.8 0.7 K1

0.00012 ECHU1C121◻X5 1.6 0.8 0.7 K1 ECHU1H121◻X5 2.0 1.25 0.9 J1

0.00015 ECHU1C151◻X5 1.6 0.8 0.7 K1 ECHU1H151◻X5 2.0 1.25 0.9 J1

0.00018 ECHU1C181◻X5 1.6 0.8 0.7 K1 ECHU1H181◻X5 2.0 1.25 0.9 J1

0.00022 ECHU1C221◻X5 1.6 0.8 0.7 K1 ECHU1H221◻X5 2.0 1.25 0.9 J1

0.00027 ECHU1C271◻X5 1.6 0.8 0.7 K1 ECHU1H271◻X5 2.0 1.25 0.9 J1

0.00033 ECHU1C331◻X5 1.6 0.8 0.7 K1 ECHU1H331◻X5 2.0 1.25 0.9 J1

0.00039 ECHU1C391◻X5 1.6 0.8 0.7 K1 ECHU1H391◻X5 2.0 1.25 0.9 J1

0.00047 ECHU1C471◻X5 1.6 0.8 0.7 K1 ECHU1H471◻X5 2.0 1.25 0.9 J1

0.00056 ECHU1C561◻X5 1.6 0.8 0.7 K1

0.00068 ECHU1C681◻X5 1.6 0.8 0.7 K1 ECHU1H681◻X5 2.0 1.25 0.9 J1

0.00082 ECHU1C821◻X5 1.6 0.8 0.7 K1 ECHU1H821◻X5 2.0 1.25 0.9 J1

0.0010 ECHU1C102◻X5 1.6 0.8 0.7 K1 ECHU1H102◻X5 2.0 1.25 0.9 J1

0.0012 ECHU1C122◻X5 1.6 0.8 0.7 K1 ECHU1H122◻X5 2.0 1.25 0.9 J1

0.0015 ECHU1C152◻X5 1.6 0.8 0.7 K1 ECHU1H152◻X5 2.0 1.25 0.9 J1

0.0018 ECHU1C182◻X5 1.6 0.8 0.7 K1 ECHU1H182◻X5 2.0 1.25 0.9 J1

0.0022 ECHU1C222◻X5 1.6 0.8 0.7 K1 ECHU1H222◻X5 2.0 1.25 0.9 J1

0.0027 ECHU1C272◻X5 1.6 0.8 0.7 K1 ECHU1H272◻X5 2.0 1.25 0.9 J1

0.0033 ECHU1C332◻X5 2.0 1.25 0.9 J1

0.0039 ECHU1C392◻X5 2.0 1.25 0.9 J1 ECHU1H392◻X5 3.2 1.6 0.9 H1

0.0047 ECHU1C472◻X5 2.0 1.25 0.9 J1 ECHU1H472

0.0056 ECHU1C562◻X5 2.0 1.25 0.9 J1 ECHU1H562◻X5 3.2 1.6 0.9 H1

0.0068 ECHU1C682◻X5 2.0 1.25 0.9 J1 ECHU1H682◻X5 3.2 1.6 0.9 H1

0.0082 ECHU1C822◻X5 2.0 1.25 1.1 J2 ECHU1H822◻X5 3.2 1.6 1.1 H2

0.010 ECHU1C103◻X5 2.0 1.25 1.1 J2 ECHU1H103◻X5 3.2 1.6 1.1 H2

0.012 ECHU1C123◻X5 3.2 1.6 0.9 H1 ECHU1H123◻X5 3.2 2.5 1.1 G1

0.015 ECHU1C153◻X5 3.2 1.6 0.9 H1 ECHU1H153◻X5 3.2 2.5 1.1 G1

0.018 ECHU1C183◻X5 3.2 1.6 0.9 H1 ECHU1H183◻X5 3.2 2.5 1.5 G2

0.022 ECHU1C223◻X5 3.2 1.6 0.9 H1 ECHU1H223◻X5 3.2 2.5 1.5 G2

0.027 ECHU1C273◻X5 3.2 1.6 1.1 H2 ECHU1H273◻X5 3.2 2.5 1.5 G2

0.033 ECHU1C333◻X5 3.2 1.6 1.1 H2 ECHU1H333◻X5 3.2 2.5 2.1 G3

0.039 ECHU1C393◻X5 3.2 1.6 1.5 H3

0.047 ECHU1C473◻X5 3.2 1.6 1.5 H3 ECHU1H473◻X9 4.8 3.3 1.5 E1

0.056 ECHU1C563◻X5 3.2 2.5 1.5 G2 ECHU1H563◻X9 4.8 3.3 1.5 E1

0.068 ECHU1C683◻X5 3.2 2.5 1.5 G2 ECHU1H683◻X9 4.8 3.3 1.5 E1

0.082 ECHU1C823◻X5 3.2 2.5 2.1 G3 ECHU1H823◻X9 4.8 3.3 2.1 E2

0.10 ECHU1C104◻X5 3.2 2.5 2.1 G3 ECHU1H104◻X9 4.8 3.3 2.1 E2

0.12 ECHU1H124◻X9 6.0 4.1 1.9 D1

0.15 ECHU1H154◻X9 6.0 4.1 1.9 D1

0.18 ECHU1H184◻X9 6.0 4.1 2.5 D3

0.22 ECHU1H224◻X9 6.0 4.1 2.8 D4

◻ : Capacitance tolerance code

✽

Rated voltage 16 V.DC Rated voltage 50 V.DC

Dimensions (mm)

LWH LWH

Size

Q'ty Part No.

code

Dimensions (mm)

ECHU1H101◻X5 2.0 1.25 0.9 J1

4000

ECHU1H561◻X5 2.0 1.25 0.9 J1

ECHU1H332◻X5 3.2 1.6 0.9 H1

◻X5 3.2 1.6 0.9 H1

3000

ECHU1H393

◻X5 3.2 2.5 2.1 G3

2000

Size

code

Q'ty

3000

2000

3000

2000

Recommended for land dimensions

Unit : mm

Sep. 201702

Land

Electrode

C

Size

code

K1 0.6 2.0 0.7

Land dimensions

Refl ow soldering

ABC

J1, J2 0.8 2.4 1.1

H1, H2, H3 1.8 3.6 1.4

A
B

G1, G2, G3 1.8 3.6 2.3

E1, E2 3.0 5.6 3.0

D1, D3, D4 4.0 7.0 3.8

lt is not warrantable that you can mount the capacitor without trouble under all the mounting condition when “Recommender for Land dimensions” is adopted.

✽

Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.