PANASONIC ECHU-50-330P Datasheet
Plastic Film Capacitors
Stacked Metallized PPS Film Chip Capacitor
Type: ECHU(X)
Stacked metallized PPS film as dielectric with simple
mold-less construction
■Features
Small in size (minimum size 1.6 mm ✕ 0.8 mm)
•
85 ˚C, 85 %RH, W.V.✕ 1.0 for 500 hours
•
For reflow soldering
•
RoHS directive compliant
•
■Recommended Applications
Time-constant
•
Filtering
•
Oscillation and resonance
•
■Explanation of Part Numbers
123456789101112
E C H U
Product code
■Specifications
Category temp. range
(Including temperature-rise on unit surface)
Rated voltage
Capacitance range
Capacitance tolerance
Withstand voltage
Dissipation factor (tan )
Insulation resistance (IR)
Soldering conditions
Dielectric &
construction
Rated voltage
1C 16 VDC
1H 50 VDC
Capacitance
Cap. Tol. Suffix
G±2 %
J±5 %
−55 ℃ to ＋125 ℃
16 VDC，50 VDC
(50 VDC: 0.12 µF or more: Derating or rated voltage by 1.25 % / ℃at more than 105 ℃)
0.00010 µF to 0.22 µF (E12)
±2 %(G), ±5 %(J)
Between terminals : Rated volt. (VDC)✕150 % 60 s
tanδ≦0.6 % (20 ℃, 1 kHz)
16 VDC：IR≧3000 MΩ (20 ℃, 10 VDC, 60 s)
50 VDC：IR≧3000 MΩ (20 ℃, 50 VDC, 60 s)
Reflow soldering : 260 ˚C max. and 95 sec max. at more than 220 ˚C (Temp. at cap. surface)
X
Tape width
Reel diameter
5
size ø180 mm
9
size ø330 mm
Suffix
8 mm
12 mm
❈
Tape width 8 mm
and diameter
ø330 mm reel is
prepared.
❈ Please consult us for flow soldering
In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage, please
❈
refer to the page of “Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage”.
■Construction
■Dimensions in mm (not to scale)
Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use.
Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail.
saize
L WHe g
code
K1 1.6 0.8 0.7 0.35 ≧0.4
J1 2.0 1.25 0.9 0.45 ≧0.6
J2 2.0 1.25 1.1 0.45 ≧0.6
H1 3.2 1.6 0.9 0.65 ≧1.0
H2 3.2 1.6 1.1 0.65 ≧1.0
H3 3.2 1.6 1.5 0.65 ≧1.0
G1 3.2 2.5 1.1 0.65 ≧1.0
G2 3.2 2.5 1.5 0.65 ≧1.0
G3 3.2 2.5 2.1 0.65 ≧1.0
E1 4.8 3.3 1.5 0.80 ≧2.0
E2 4.8 3.3 2.1 0.80 ≧2.0
D1 6.0 4.1 1.9 0.80 ≧2.0
D3 6.0 4.1 2.5 0.80 ≧2.0
D4 6.0 4.1 2.8 0.80 ≧2.0
■Taping Specification for Automatic Mounting
Refer to the page of taping specifications
■Rating, Dimensions & Quantity/Reel
● Capacitance tolerance : ± 2 % (G), ± 5 % (J)
Plastic Film Capacitors
Rated volt. 16 VDC
Cap. (µF)
0.00010
0.00012
0.00015
0.00018
0.00022
0.00027
0.00033
0.00039
0.00047
0.00056
0.00068
0.00082
0.0010
0.0012
0.0015
0.0018
0.0022
0.0027
0.0033
0.0039
0.0047
0.0056
0.0068
0.0082
0.010
0.012
0.015
0.018
0.022
0.027
0.033
0.039
0.047
0.056
0.068
0.082
0.10
0.12
Part No.
ECHU1C101□X5 1.6 0.8 0.7 K1
ECHU1C121□X5 1.6 0.8 0.7 K1
ECHU1C151□X5 1.6 0.8 0.7 K1
ECHU1C181□X5 1.6 0.8 0.7 K1
ECHU1C221□X5 1.6 0.8 0.7 K1
ECHU1C271□X5 1.6 0.8 0.7 K1
ECHU1C331□X5 1.6 0.8 0.7 K1
ECHU1C391□X5 1.6 0.8 0.7 K1
ECHU1C471□X5 1.6 0.8 0.7 K1
ECHU1C561□X5 1.6 0.8 0.7 K1
ECHU1C681□X5 1.6 0.8 0.7 K1
ECHU1C821□X5 1.6 0.8 0.7 K1
ECHU1C102□X5 1.6 0.8 0.7 K1
ECHU1C122□X5 1.6 0.8 0.7 K1
ECHU1C152□X5 1.6 0.8 0.7 K1
ECHU1C182□X5 1.6 0.8 0.7 K1
ECHU1C222□X5 1.6 0.8 0.7 K1
ECHU1C272□X5 1.6 0.8 0.7 K1
ECHU1C332□X5 2.0 1.25 0.9 J1
ECHU1C392□X5 2.0 1.25 0.9 J1
ECHU1C472□X5 2.0 1.25 0.9 J1
ECHU1C562□X5 2.0 1.25 0.9 J1
ECHU1C682□X5 2.0 1.25 0.9 J1
ECHU1C822□X5 2.0 1.25 1.1 J2
ECHU1C103□X5 2.0 1.25 1.1 J2
ECHU1C123□X5 3.2 1.6 0.9 H1
ECHU1C153□X5 3.2 1.6 0.9 H1
ECHU1C183□X5 3.2 1.6 0.9 H1
ECHU1C223□X5 3.2 1.6 0.9 H1
ECHU1C273□X5 3.2 1.6 1.1 H2
ECHU1C333□X5 3.2 1.6 1.1 H2
ECHU1C393□X5 3.2 1.6 1.5 H3
ECHU1C473□X5 3.2 1.6 1.5 H3
ECHU1C563□X5 3.2 2.5 1.5 G2
ECHU1C683□X5 3.2 2.5 1.5 G2
ECHU1C823□X5 3.2 2.5 2.1 G3
ECHU1C104□X5 3.2 2.5 2.1 G3
↑
Dimensions (mm)
LWH
0.15
0.18
0.22
Cap. tol. code
■Recommended for Land Dimensions (mm)
Size
Code
Rated volt. 50 VDC
Q'ty
Part No.
Dimensions (mm)
LWH
ECHU1H101□X5 2.0 1.25 0.9 J1
ECHU1H121□X5 2.0 1.25 0.9 J1
ECHU1H151□X5 2.0 1.25 0.9 J1
ECHU1H181□X5 2.0 1.25 0.9 J1
ECHU1H221□X5 2.0 1.25 0.9 J1
ECHU1H271□X5 2.0 1.25 0.9 J1
ECHU1H331□X5 2.0 1.25 0.9 J1
ECHU1H391□X5 2.0 1.25 0.9 J1
ECHU1H471□X5 2.0 1.25 0.9 J1
4000
ECHU1H561□X5 2.0 1.25 0.9 J1
ECHU1H681□X5 2.0 1.25 0.9 J1
ECHU1H821□X5 2.0 1.25 0.9 J1
ECHU1H102□X5 2.0 1.25 0.9 J1
ECHU1H122□X5 2.0 1.25 0.9 J1
ECHU1H152□X5
2.0 1.25 0.9 J1
ECHU1H182□X5 2.0 1.25 0.9 J1
ECHU1H222□X5 2.0 1.25 0.9 J1
ECHU1H272□X5 2.0 1.25 0.9 J1
ECHU1H332□X5 3.2 1.6 0.9 H1
ECHU1H392□X5 3.2 1.6 0.9 H1
ECHU1H472□X5 3.2 1.6 0.9 H1
ECHU1H562□X5 3.2 1.6 0.9 H1
ECHU1H682□X5 3.2 1.6 0.9 H1
ECHU1H822□X5 3.2 1.6 1.1 H2
3000
ECHU1H103□X5 3.2 1.6 1.1 H2
ECHU1H123□X5 3.2 2.5 1.1 G1
ECHU1H153□X5 3.2 2.5 1.1 G1
ECHU1H183□X5 3.2 2.5 1.5 G2
ECHU1H223□X5 3.2 2.5 1.5 G2
ECHU1H273□X5 3.2 2.5 1.5 G2
ECHU1H333□X5 3.2 2.5 2.1 G3
ECHU1H393□X5 3.2 2.5 2.1 G3
ECHU1H473□X9 4.8 3.3 1.5 E1
ECHU1H563□X9 4.8 3.3 1.5 E1
2000
ECHU1H683□X9 4.8 3.3 1.5 E1
ECHU1H823□X9 4.8 3.3 2.1 E2
ECHU1H104□X9 4.8 3.3 2.1 E2
ECHU1H124□X9 6.0 4.1 1.9 D1
ECHU1H154□X9 6.0 4.1 1.9 D1
ECHU1H184□X9 6.0 4.1 2.5 D3
ECHU1H224□X9 6.0 4.1 2.8 D4
↑
Size
Code
Q'ty
3000
2000
3000
2000
Land dimensions
Size
Code
K1 0.6 2.0 0.7
J1,J2 0.8 2.4 1.1
H1,H2,H3 1.8 3.6 1.4
G1,G2,G3 1.8 3.6 2.3
E1,E2 3.0 5.6 3.0
D1,D3,D4 4.0 7.0 3.8
❈
It is not warrantable that you can mount the capacitor without trouble under all the mounting condition when
Reflow soldering
ABC
“Recommender for Land dimensions” is adopted.
Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use.
Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail.
ECHU (X) Type
DC16V series
(Stacked Metallized Film)
Electrical Characteristics < Typical Data >
Temperature Characteristics Frequency Characteristics
10
5
0
at 1kHz
0.010uF
0.10uF
10
0.10uF
0.010uF
5
0
3300pF
-5
Capacitance change(%)
-10
-60 -40 -20 0 20 40 60 80 100120140
Temperature(Degree C)
at 1kHz
10
8
6
4
2
Dissipation factor(%)
0
-60 -40 -20 0 20 40 60 80 100120140
Temperature(Degree C)
1.E+12
at DC 10V
1.E+11
1.E+10
0.10uF
1.E+09
1.E+08
1.E+07
Insuration resistance(ohm)
1.E+06
-60 -40 -20 0 20 40 60 80 100120140
Temperature(Degree C)
0.010uF
0.10uF
0.010uF
-5
Capacitance change(%)
-10
1 10 100 1000 10000
Frequency (kHz)
3
2
0.10uF
1
Dissipation factor(%)
0
1 10 100 1000 10000
Frequency (kHz)
10000
1000
100
10
0.10uF
1
Impedance(ohm)
0.1
0.01
10 100 1000 10000 100000
Frequency (kHz)
3300pF
0.010uF
0.010uF
3300pF
Loading...