Panasonic EBL512 G3 5000, EBL512 G3 5001 Information

Panasonic Electric Works Nordic AB
Jungmansgatan 12, SE-211 19 Malmö, Sweden
Tel: [phone] • Fax: [phone]
[e-mail] • www.panasonic-fire-security.com

Fire alarm system

EBL512 G3

5000 and 5001

 EBL512 G3 -- the third generation of the intelligent analog addressable system EBL512.
 Up to 1020 addresses - 512 alarm points - per control and indicating equipment (c.i.e.)
 Redundant network for up to 30 control units with two TLON networks

Analog addressable system

EBL512 G3 is an intelligent, analog and
addressable Control and Indicating Equip-

ment for fire detection and fire alarm systems
for buildings, which conforms to the EN54-2

and –4 standards. The front and a large
display make it very user-friendly. Comes
without or with a built-in printer.

Features / functions

The EBL512 G3 system meets the most
stringent requirements relating to fire
detection and alarm. The PC software
WinG3 is used to create, edit, download,
upload (backup) the site specific data (SSD),
maintenance, new SW downloads, etc.

Some features / functions:
 Adaptation of each analog detector's

alarm level in relation to its contamina­tion. Service signal when required.

 Alarm algorithms with filtering to

reduce nuisance alarms. Algorithm for
faster detection of smouldering fires.

 Functions, customer related: Test mode,

Alert Annunciation, disablements, etc.

 Functions: Fire door closing, inter-

locking combinations of outputs &
inputs, time channels, alarm delay, two­unit dependence, user definable alarm
text for each alarm point, etc.

 Programmable inputs and outputs and

a large number of trigger conditions.

 Expansion boards (options) up to six

boards with conv. zone line inputs
and/or relay outputs.

 Interface for ext. Fire Brigade Panels,

Alert Annunciation Units, etc.

 Web-server 1598 (option) can connect

the system to Internet / an Intranet
(LAN) for status presentation and
remote control via a PC (web browser).

Up to 1020 addresses

EBL512 G3 has a capacity of 1020
addresses, of which 128, 256 or 512 are
addresses for alarm points. Can be upgraded
on site, i.e. 128  256  512 alarm points.

Each c.i.e. has four COM loops for
connection of up to 255 units per loop.

Some loop units that can be connected:

 Analog detectors (sensors)
 Addressable manual call points
 Addressable short circuit isolator
 Addressable input and output units
 Addressable siren, sounder base &

beacon

 Addressable external power supply unit

TLON Network

Up to 30 EBL512 G3 control units can be
connected in a TLON network. One TLON
connection board 1590 is required in each
c.i.e. Two 1590 for a redundant network.

Miscellaneous

EBL512 G3 has space in the grey metal
cabinet for two 28Ah Sealed Lead-Acid
batteries.

In each c.i.e. can be mounted up to six
expansion boards 4580-4583.

All technical features and data are subject to changes without notice, resulting from continuous development and improvement.

Product Leaflet

Date of issue

Revision / Date of revision

MEW01251

2010-06-08

1 / 2010-09-30

Type numbers

5000

EBL512 G3 c.i.e. with or without a printer and 128, 256 or 512 alarm points are
depending on the article number. Supplied with a standard mounting plate
approved for an incombustible wall (e.g. concrete).

5001

EBL512 G3 c.i.e. No front, no display & no door with plexiglass. 128, 256 or
512 alarm points are depending on the article number. Supplied with a standard
mounting plate approved for an incombustible wall (e.g. concrete).

5020

Mounting plate for 19'' mounting rack. For one 5000 / 5001.

5021

Mounting plate for inflammable wall (e.g. wood). For one 5000 / 5001.

5059

Paper rolls (spare part for the printer mounted in 5000). Four pieces.

4580

8 zones expansion board (8 zone line inputs for conventional detectors).

4581

8 relays expansion board (8 programmable relay outputs).

4583

In- and outputs expansion board.

5089

Connection cable for up to six expansion boards (4580-4583).

1590

TLON connection board – required for a TLON network. One board in each
c.i.e. NOTE! For redundant network two 1590 boards are required in each c.i.e.

EBL512 G3 Article number = Type number plus required parameters, e.g. 5000xxPRTCC-aaa.

xx = Design style (customer option, e.g. colour)

PRT = With printer

CC = Country Code

aaa = 128, 256 or 512 alarm points (customer option, e.g. 512)

Technical data

Voltage
primary (V AC)
secondary / system voltage (V DC)

230 (50 Hz)
24 (By backup battery 21 – 30.)

Current consumption (A)

AC current: 1.6.
DC current: Depending on type (5000 / 5001), expansion board(s), etc.

see EBL512 G3 Planning Instructions (MEW01182).

Ambient temperature (C)
operating
storage

0 to +40

-40 to +70

Ambient humidity (% RH)

max. 90, non-condensing

Ingress Protection rating

IP30

Inputs

4 COM loops for 1020 addresses. 128, 256 or 512 alarm points.

4 programmable

Outputs

4 programmable supervised voltage outputs

2 programmable relay outputs

Relay outputs for routing equipment (Fire alarm and Fault condition)

Power supply (6 x 24 V DC) for Web-server, routing equipment, external
equipment, etc.

Size W x H x D (mm)

5000: 438 x 628x 187 5001: 418 x 625 x 177

Weight (kg)

5000: 20 / 5001: 19

Colour (metal cabinet)

Light grey (NCS S1500-N, PMS Cool Grey 2)

Approvals

EC certificate no. 0786-CPD-20982

EN54-2:1997 / A1:2006, EN54-4:1997 / A2:2006
The Swedish front conforms to SS3654.

Note! All voltages are nominal.