Panasonic DVD-LS90 User Manual

Operating Instructions

Portable DVD/CD Player

Model No. DVD-LS90

[DVD-LS90]

Dear customer

Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. Before connecting, operating or adjusting this product, please read the instructions completely. Please keep this manual for future reference.

Operations in these instr uctions are described mainly with the main unit, but you can do the operations on the remote control if the remote controls are the same (➜ Back cover)

Unless otherwise indicated, illustrations in these operating instructions are of DVD-LS90.

DVD-LS93

MULTI-FORMAT PLAYBACK

DVD-RAM

recorded with DVD video recorders etc.

Video & Still pictures (JPEG)

DVD-RW (DVD-VR)

recorded and finalized with DVD video recorders etc.

DVD-Video/Video CD/CD

sold on the market

Movie, Music etc.

DVD-R/DVD-RW/+R/+RW

recorded and finalized with DVD video recorders etc.

Video (played as DVD-Video)

CD-R/CD-RW

recorded and finalized with personal computers etc.

Music (WMA/MP3) & Still pictures (JPEG

See page 5 for details.

For U.S.A.: The warranty can be found on page 28. For Canada: The warranty can be found on page 30.

If you have any questions contact

In the U.S.A.: 1-800-211-PANA(7262) In Canada: 1-800-561-5505

)

This manual was printed

with soy based ink.

RQT8067-P

WARNING:

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE, DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.

CAUTION!

≥

DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE. ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS.

≥

DO NOT OBSTRUCT THE UNIT’S VENTILATION OPENINGS WITH NEWSPAPERS, TABLECLOTHS, CURTAINS, AND SIMILAR ITEMS.

≥

DO NOT PLACE SOURCES OF NAKED FLAMES, SUCH AS LIGHTED CANDLES, ON THE UNIT.

≥

DISPOSE OF BATTERIES IN AN ENVIRONMENTALLY FRIENDLY MANNER.

THE FOLLOWING APPLIES ONLY IN THE U.S.A. AND CANADA

The following mark and symbols are located on bottom of the unit.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF

Marking sign is located on bottom of the unit.

ELECTRIC SHOCK, DO NOT REMOVE SCREWS. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

THE FOLLOWING APPLIES ONLY IN THE U.S.A. CAUTION:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

RQT8067

(Bottom of product)

≥

Reorient or relocate the receiving antenna.

≥

Increase the separation between the equipment and receiver.

≥

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

≥

Consult the dealer or an experienced radio/TV technician for help.

Any unauthorized changes or modifications to this equipment would void the user’s authority to operate this device.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

WARNING:

The driver must not operate this unit while the vehicle is moving. Do not operate this unit where it can be viewed by the driver. Driver operation or viewing of this unit while the vehicle is moving will cause distraction which may result in serious accident and personal injury or property damage.

CAUTION!

THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.

CAUTION!

DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED.

REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE RECOMMENDED BY THE MANUFACTURER. DISCARD USED BATTERIES ACCORDING TO THE MANUFACTURER’S INSTRUCTIONS.

AC adaptor

This AC adaptor operates on AC between 100 V and 240 V. But

≥

In the U.S.A. and Canada, the AC power supply cord must be connected to a 120 V AC power supply only.

≥

When connecting to an AC supply outside of the U.S.A. or Canada, use a plug adaptor to suit the AC outlet configuration.

≥

When connecting to a supply of greater than AC 125 V, ensure the cord you use is suited to the voltage of the AC supply and the rated current of the AC adaptor.

≥

Contact an electrical parts distributor for assistance in selecting a suitable AC plug adaptor or AC cord set.

The socket outlet shall be installed near the equipment and easily accessible or the mains plug or an appliance coupler shall remain readily operable.

This product may receive radio interference caused by mobile telephones during use. If such interference is apparent, please increase separation between the product and the mobile telephone.

THIS UNIT IS INTENDED FOR USE IN MODERATE CLIMATES.

IMPORTANT SAFETY

INSTRUCTIONS . . . . . . . . . . . . 4

Accessories . . . . . . . . . . . . . . . . . . 5

Discs that can be played . . . . . . . 5

Preparations

Attaching the battery. . . . . . . 6

Recharging the battery . . . . . 6

The remote control . . . . . . . . 7

Adjusting the LCD angle. . . . 7

Play. . . . . . . . . . . . . . . . . . . . . . . . 8

Useful functions . . . . . . . . . . . . . 10

Enjoying higher quality

audio and video . . . . . . . . . . . 12

Program/Random play . . . . . . . . 13

Playing data discs . . . . . . . . . . . . 14

Playing HighMAT Playing programs/playlists

on RAM/DVD-RW (DVD-VR)

discs . . . . . . . . . . . . . . . . . . . . 15

Playing CD . . . . . . . . . . . . . . . . . . 15

Using On-Screen Menus. . . . . . . 16

Changing the player settings Using this unit with

other equipment . . . . . . . . . . . 20

Using a Car DC Adaptor

(included) . . . . . . . . . . . . . . . . 21

Frequently asked questions. . . . 22

Tips for making WMA/MP3

and JPEG discs

(For CD-R/CD-RW) . . . . . . . . . 22

Specifications . . . . . . . . . . . . . . . 23

Troubleshooting guide . . . . . . . . 24

Maintenance . . . . . . . . . . . . . . . . 27

Limited Warranty

(ONLY FOR U.S.A.). . . . . . . . . 28

Product Service . . . . . . . . . . . . . . 29

Limited Warranty

(ONLY FOR CANADA) . . . . . . 30

Main feature index. . . . .Back cover

discs . . . . . . 15

. . . . 18

Table of contents

RQT8067

IMPORTANT SAFETY INSTRUCTIONS

Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference.

1) Read these instructions.

2) Keep these instructions.

3) Heed all war nings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A groundingtype plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or

pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

Batteries

1. Battery pack (Lithium ion battery pack)

≥

Use this unit to recharge the battery pack.

≥

Do not use the battery pack with equipment other than the specified player.

≥

Do not use the player outside if it is

IMPORTANT SAFETY INSTRUCTIONS

snowing or raining. (The battery pack is not waterproof.)

≥

Do not get dirt, sand, liquids, or other foreign matter on the ter minals.

≥

Do not touch the plug terminals (i and

) with metal objects.

≥

Do not disassemble, remodel, heat or throw into fire.

2. Button-type battery (Lithium battery)

≥

Insert with poles aligned.

≥

Do not touch the terminals (i and j) with metal objects.

≥

Do not disassemble, remodel, heat or throw into fire.

≥

Keep out of reach of children If any electrolyte should come into contact with your hands or clothes, wash it off thoroughly with water. If any electrolyte should come into contact with your eyes, never rub the eyes. Rinse eyes thoroughly with water, and then consult a doctor.

3. Disposing of the batteries

Check and follow your local regulations before disposal.

11) Only use attachments/accessories specified by the manufacturer.

12) Use only with the cart, stand,

tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

CAUTION:

The batteries used in this device may present a risk of fire or chemical burn if mistreated. Do not disassemble or incinerate the batteries. Do not heat the batteries above the following temperatures.

Button-type battery 100 Battery pack 60

Do not recharge the button-type battery. Replace only with Panasonic part number indicated below: Button-type battery (Lithium battery)

(for remote control) CR2025

Battery pack

(Lithium ion battery pack)

Use of other batteries may present a risk of fire or explosion.

THE FOLLOWING APPLIES ONLY IN THE U.S.A. AND CANADA

A lithium ion/polymer battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY for information on how to recycle this battery.

C (212 oF)

C (140 oF)

CGR-H702 CGR-H703

RBRC

Li-ion

RQT8067

Accessories

Use numbers indicated in parentheses when asking for replacement parts. (Product numbers correct as of February 2005. These may be subject to change.)

(Only for U.S.A.) To order accessories, refer to “Accessory Purchases” on page 29.

∑ 1

Remote control (N2QAHC000021)

∑ 1

Button-type battery for remote control

∑ 1

Audio/video cable (K2KA6CB00003)

∑ 1

AC adaptor (RFEA213W)

∑ 1

AC power supply cord (K2CB2CB00006)

≥

The included AC power supply cord and AC adaptor are for use with this unit only.

Do not use them with other equipment.

≥

Optional battery pack (Lithium ion battery pack) CGR-H703, CGR-H702

(For other areas) To order accessories, call the dealer from whom you have made your purchase.

(for replacement, see page 7.)

∑ 1

Rechargeable battery pack

[DVD-LS90] (CGR-H702)

[DVD-LS93] (CGR-H703)

For replacement: Available from Panasonic dealers

∑ 1

Car DC Adaptor (RFEC201M)

Discs that can be played

Operations in these instructions are described mainly with reference to specific formats. Icons such as [RAM] show the formats.

DVD-RAM [RAM] [JPEG]

≥

[RAM] Recorded with devices using Version 1.1 of the Video Recording Format (a unified video recording standard), such as DVD video recorders, DVD video cameras, personal computers, etc.

≥

[JPEG] Recorded with Panasonic DVD-Video recorders using DCF (Design rule for Camera File system) Standard Version 1.0. To play JPEG files, select “Play as Data Disc” (➜ page 17, Other Menu).

DVD-Video [DVD-V]

Discs marked with labels containing the region number “1” or “ALL”

DVD-R (DVD-Video)/DVD-RW (DVD-Video) [DVD-V]

Discs recorded and finalized§

DVD-RW (DVD-VR) [DVD-RW[‹VR›]

Discs recorded and finalized cameras using Version 1.1 of the Video Recording Format (a unified video recording standard).

—

iR (Video)/iRW (Video) [DVD-V]

Discs recorded and finalized§

Video CD [VCD]

Including SVCD (Conforming to IEC62107)

on DVD video recorders or DVD video cameras

on DVD video recorders or DVD video

on DVD video recorders or DVD video cameras

Example:

ALL

Accessories/Discs that can be played

CD [CD] [WMA] [MP3] [JPEG] [VCD]

≥

This unit can play CD-R/RW recorded with the above formats. Close the sessions or finalize

≥

[WMA] [MP3] [JPEG] This unit also plays HighMAT discs.

A process that allows play on compatible equipment.

≥

It may not be possible to play the above discs in all cases due to the type of disc or condition of the recording.

∫

Discs that cannot be played

DVD-Audio, DVD-ROM, Version 1.0 of DVD-RW, CD-ROM, CDV, CD-G, SACD, DivX Video Discs and Photo CD, DVD-RAM that cannot be removed from their car tridges, 2.6-GB and 5.2-GB DVD-RAM, PAL discs and “Chaoji VCD” available on the market including CVD, DVCD and SVCD that do not conform to IEC62107.

Note about using a DualDisc

≥

The digital audio content side of a DualDisc does not meet the technical specifications of the Compact Disc Digital Audio (CD-DA) format so play may not be possible.

≥

Do not use a DualDisc in this unit as it may not be possible to insert it correctly and it may get scratched or scraped.

the disc after recording.

RQT8067

Preparations

RELEASE

DETACH ATTACH

RELEASE

DETACH ATTACH

1 Attaching the battery (When the unit is off)

The illustrations show how to attach the CGR-H702. Attach CGR-H703 in the same way.

Bottom side of this unit

RELEASE

DETACH ATTACH

Detaching

≥

Turn the unit off before detaching the battery pack.

≥

The illustrations show how to detach the CGR-H702. Detach CGR-H703 in the same way.

Preparations

Battery pack

Check to make sure it is securely fastened.

When not using for long periods of time

≥

Remove the battery pack (➜ left).

Clicks into place

(Even when the unit is turned off, there is a small amount of voltage running through the unit, and this may result in a malfunction.)

≥

Recharge the batter y for re-use.

1 Press and hold

Recharging the battery (When the unit is off)

AC power supply cord

(included)

DC IN

DC IN 12 V

AC adaptor

(included)

To household AC outlet

RQT8067

≥

You can also use this unit without charging while connecting the AC adaptor and the AC power supply cord.

To conserve power

This unit consumes 0.5 W of power even when turned off. When the unit is not going to be used for a long time, disconnect the AC power supply cord from the household AC outlet.

The unit is in the standby condition (the [Í] indicator lights) when the AC mains lead is connected. The primary circuit is always “live” as long as the AC adaptor is connected to an electrical outlet.

CHG

Started

] goes out ➜ lights

[

Finished

[CHG] lights ➜ goes out

Recharging time [DVD-LS90]: Approx. 8 hours [DVD-LS93]: Approx. 13 hours

When finished, disconnect the AC adaptor and the AC power supply cord.

Checking the remaining battery charge

When the unit is on (➜ page 8) and powered by the battery pack

Press [DISPLAY] to check on the LCD (Displays for a few seconds).

(screen)

Recharge (Appears automatically when there is only a

Approximate play times

Play (at room temperature using headphones)

Battery pack

CGR-H702 6 4 3 8

CGR-H703 10 8 6 16

≥

The times indicated above may differ depending on use.

≥

To change the LCD brightness (➜ page 11, Adjusting the picture quality on the LCD).

LCD brightness level

5 0 (factory preset)

(Hours)

few minutes of charge remaining.)

LCD Off

3 The remote control

Insert the button-type battery (included)

Bottom

While sliding (1), pull out (2).

≥

Keep out of the small children.

≥

Accidental swallowing of batteries can result in stomach and intestinal damage.

facing up

Lithium battery: CR2025

Range of use

30o

Aim at the sensor. Maximum range is up to 7 m (23 feet).

4 Adjusting the LCD angle

Preparations

Open the LCD

Standard

When moving the unit : Close the LCD. Don’t hold by the LCD.

Free

Slide

Clicks!

Compact

RQT8067

Play

OPEN

VOL

OFF

1 Open the lid.

OPEN

Insert a disc and close the lid

Click into place

Headphone terminals [Ë

3.5 mm (1/8

) Stereo

]

Play

Load double-sided discs so the label for the side you want to play is facing up.

[RAM] Remove discs from their cartridges before use.

≥

While stopped, the unit automatically turns off once 15 minutes (after approximately 5 minutes when using the battery pack) have elapsed.

≥

Discs continue to rotate while menus are displayed. Press [∫, –OFF] when you finish to preserve the unit’s motor.

≥

Total title number may not be displayed properly on iR/iRW.

≥

If you are experiencing problems, refer to troubleshooting guide (➜ page 24).

Main unit operations

OFF

RQT8067

3 Press and hold.

The unit turns on and play begins.

Turn unit on/play

Pause Press [

Stop

Turn unit off Press and hold until “OFF” is displayed.

Press and hold and the power comes on and play begins.

, ON] to restart play.

The position is memorized when “!” flashes on the screen.

≥

Press [1, ON] to resume.

≥

[DVD-V] While the message is displayed, press [1,

reviewed.

Opening the lid, or pressing [∫, –OFF] while “!” is flashing cancels the memorized position where play stopped.

ON] and the previous chapters are

Adjust the volume.

VOL

TOP MENU

RETURN

ENTER

Skip

Press [:

[RAM] [DVD-RW[‹VR›]

9].

Can also skip to the markers.

Search Press and hold [:,9] (up to 5 steps).

Slow play

Press and hold [: while paused. Press [

, ON

9] (up to 5 steps)

] to return to nor mal play.

[VCD] [9] only

Top m enu [DVD-V]

Playing programs [RAM] [DVD-RW[‹VR›] (➜ page 15)

Menu [DVD-V] Playing playlists [RAM] [DVD-RW[‹VR›] (➜ page 15)

Navigation menu [WMA] [MP3] [JPEG] (➜ page 14)

RETURN

Return

Menu operation

Frame-by-frame

ENTER

Group skip

Returns to the previous screen.

[VCD] (with playback control) Returns to the menu.

Press [3 42 1] to select an item and press [ENTER] to confirm.

2 1

While paused, press [

[VCD] [

] only

[WMA] [MP3] [JPEG] Press [3 4].

Remote control operations

Skip Press [:

Search Press [6 Slow play Press [6

Press [

[VCD] [

[RAM] [DVD-RW[‹VR›] [DVD-V] [VCD] [CD]

9 0

Enter number

e.g. To select 12: [S10] ➜ [1] ➜ [2]

[VCD] with playback control

While stopped, press the numbered buttons.

[WMA] [MP3] [JPEG]

e.g. To select 123:

≥

You cannot turn on the unit with the remote control if the unit is powered by the battery pack.

[1] ➜ [2] ➜ [3] ➜ [ENTER]

9].

5] (up to 5 steps).

5] (up to 5 steps) while paused.

] (PLAY) to return to normal play.

] only

Play

RQT8067

Useful functions

ENTER

DISPLAY

ENTER

DISPLAY A.SURROUND

Repeat play

To repeat a specified section (A-B Repeat)

Except [JPEG] and [RAM] [DVD-RW[‹VR›] (still picture part)

DISPLAY

Press once.

Changing play speed

Useful functions

DISPLAY

Press once.

≥

Press [1] (PLAY) to return to normal play.

≥

After you change the speed – Advanced Surround (➜ below) and Multi Re-master (➜ page 12) do not work. – Digital output switches to PCM-2ch. – 96 kHz sampling frequency is converted to 48 kHz.

≥

This may not work depending on the disc’s recording.

≥

To exit the screen : Press [RETURN].

Enjoying virtual surround (Advanced Surround)

[RAM] [DVD-RW[‹VR›] [DVD-V] [VCD] (2 or more channels)

(Only when the elapsed play time can be displayed.

For JPEG, you can use even if there is no elapsed time display.)

Press several times to select the content to repeat.

≥

To exit the screen : Press [RETURN].

ENTER

Press [34] to select Other Settings.

2 Press [1] to go to the next

menu and [

] to select

“Play Menu”.

3 Press [

] to go to the next

menu and [

] to select

“A-B Repeat”.

Press [ENTER] at the starting and ending points.

≥

Press [ENTER] again to cancel.

≥

To exit the screen : Press [RETURN].

[RAM] [DVD-RW[‹VR›] [DVD-V]

ENTER

Press [34] to select Other Settings.

2 Press [1] to go to the next menu and [34] to

select “Play Speed”.

3 Press [ENTER] and [

“Normal” or “k0.6” to “k1.4” (in 0.1 units).

4 Press [ENTER].

] to select

Repeat Off

A-B Repeat

A.SURROUND

A surround sound effect can be made using 2 speakers (on other equipment).

≥

When using headphones, press to select “HP 1 Natural” or “HP 2 Enhanced”.

≥

When using discs recorded with surround sound, sound seems to come from speakers on either side of you.

≥

Optimum seating position is 3 to 4 times the distance between the front left and right speakers or the width of the television if using the television’s speakers.

≥

Do not use in combination with surround effects on other equipment.

≥

To exit the screen : Press [RETURN].

RQT8067

Press to select “SP 1 Natural” or “SP 2 Enhanced”.

+ 22 hidden pages