Panasonic DMCZS30K User Manual

Basic Owner’s Manual

Digital Camera

Model No. DMC-ZS30

Please read these instructions carefully before using this
product, and save this manual for future use.

More detailed
instructions on the
operation of this
camera are contained in “Owner’s
Manual for advanced features (PDF
format)” in the supplied disc. Install
it on your PC to read it.

Register online at www.panasonic.com/register (U.S. customers only)

For USA and Puerto Rico assistance, please call: 1-800-211-PANA(7262) or,
contact us via the web at: http://www.panasonic.com/contactinfo

P

VQT4S89

M0113KZ0

Dear Customer,

Date of Purchase Dealer Phone No.

Dealer Purchased From Model No.

Dealer Address Serial No.

Thank you for choosing Panasonic!

You have purchased one of the most sophisticated and reliable
products on the market today. Used properly, we’re sure it will bring
you and your family years of enjoyment. Please take time to fill in
the information below. The serial number is on the tag located on the
underside of your camera. Be sure to retain this manual as your
convenient camera information source.

Please note that the actual controls and components, menu items, etc.
of your Digital Camera may look somewhat different from those shown
in the illustrations in this Owner’s Manual.

Carefully observe copyright laws.

• Recording of pre-recorded tapes or discs or other published or broadcast
material for purposes other than your own private use may infringe copyright
laws. Even for the purpose of private use, recording of certain material may
be restricted.

A lithium ion battery that is recyclable powers
the product you have purchased. Please call
1-800-8-BATTERY for information on how to recycle
this battery.

Information for Your Safety

The socket outlet shall be installed near the equipment and shall be
easily accessible.

■

Product identification marking

Digital camera Bottom

2 VQT4S89 (ENG)

Product Location

WARNING:

To reduce the risk of fire, electric shock or product damage,

• Do not expose this unit to rain, moisture, dripping or

splashing.

• Use only the recommended accessories.

• Do not remove covers.

• Do not repair this unit by yourself. Refer servicing to

qualified service personnel.

■

About the battery pack

CAUTION

Battery pack (Lithium ion battery pack)

• Use the specified unit to recharge the battery pack.

• Do not use the battery pack with equipment other than the specified unit.

• Do not get dirt, sand, liquids, or other foreign matter on the terminals.

• Do not touch the plug terminals (+ and −) with metal objects.

• Do not disassemble, remodel, heat or throw into fire.

If any electrolyte should come into contact with your hands or
clothes, wash it off thoroughly with water.
If any electrolyte should come into contact with your eyes, never
rub the eyes. Rinse eyes thoroughly with water, and then consult a
doctor.

CAUTION

• Danger of explosion if battery is incorrectly replaced. Replace
only with the type recommended by the manufacturer.

• When disposing the batteries, please contact your local
authorities or dealer and ask for the correct method of disposal.

• Do not heat or expose to flame.

• Do not leave the battery(ies) in a car exposed to direct sunlight for a
long period of time with doors and windows closed.

Warning

Risk of fire, explosion and burns. Do not disassemble, heat above
60 °C (140 °F) or incinerate.

(ENG) VQT4S89 3

FCC Note:

This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: To assure continued compliance, follow the attached

installation instructions and use only shielded
interface cables with ferrite core when connecting to
computer or peripheral devices.

Any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to
operate this equipment.

Declaration of Conformity

Trade Name: Panasonic
Model No.: DMC-ZS30

Responsible Party: Panasonic Corporation

Support Contact:

This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any interference
received, including interference that may
cause undesired operation.

of North America
One Panasonic Way,
Secaucus, NJ 07094
Panasonic Consumer
Marketing Company of
North America
1-800-211-PANA (7262)

DMC-ZS30

4 VQT4S89 (ENG)

■

About the AC adaptor (supplied)

CAUTION!
To reduce the risk of fire, electric shock or product damage,

• Do not install or place this unit in a bookcase, built-in cabinet or in

another confined space. Ensure this unit is well ventilated.

AC adaptor

This AC adaptor operates on AC between 110V and 240V.
But

• In the U.S.A. and Canada, the AC adaptor must be connected to
a 120V AC power supply only.

• When connecting to an AC supply outside of the U.S.A. or
Canada, use a plug adaptor to suit the AC outlet configuration.

■

Cautions for Use

• Do not use any other USB connection cables except the supplied one or a
genuine Panasonic USB connection cable (DMW-USBC1: optional).

• Always use a genuine Panasonic HDMI micro cable (RP-CHEU15: optional).
Part number: RP-CHEU15 (1.5 m) (4.9 feet)

• Always use a genuine Panasonic AV cable (DMW-AVC1: optional).

Keep this unit as far away as possible from electromagnetic equipment
(such as microwave ovens, TVs, video games etc.).

• If you use this unit on top of or near a TV, the pictures and/or sound on this
unit may be disrupted by electromagnetic wave radiation.

• Do not use this unit near cell phones because doing so may result in noise
adversely affecting the pictures and/or sound.

• Recorded data may be damaged, or pictures may be distorted, by strong
magnetic fields created by speakers or large motors.

• Electromagnetic wave radiation generated by microprocessors may adversely
affect this unit, disturbing the pictures and/or sound.

• If this unit is adversely affected by electromagnetic equipment and stops
functioning properly, turn this unit off and remove the battery or disconnect
AC adaptor (supplied)/AC adaptor (DMW-AC5PP: optional). Then reinsert the
battery or reconnect AC adaptor and turn this unit on.

Do not use this unit near radio transmitters or high-voltage lines.

• If you record near radio transmitters or high-voltage lines, the recorded
pictures and/or sound may be adversely affected.

(ENG) VQT4S89 5

Certification and Compliance

See Camera for the certification and compliance mark specific to
that device.

1 Select [Wi-Fi Setup] in the [Wi-Fi] menu
2 Press

to select [Approved Regulations], and press

[MENU/SET]

Contains FCC ID: VPYLBXN604

This transmitter must not be co-located or operated in conjunction
with any other antenna or transmitter.

This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment and meets the FCC radio
frequency (RF) Exposure Guidelines in Supplement C to OET65.
This equipment has very low levels of RF energy that are deemed
to comply without testing of specific absorption ratio (SAR).

This product is licensed under the AVC patent portfolio license for the personal
and non-commercial use of a consumer to (i) encode video in compliance
with the AVC Standard (“AVC Video”) and/or (ii) decode AVC Video that was
encoded by a consumer engaged in a personal and non-commercial activity
and/or was obtained from a video provider licensed to provide AVC Video. No
license is granted or shall be implied for any other use. Additional information
may be obtained from MPEG LA, LLC.
See http://www.mpegla.com.

6 VQT4S89 (ENG)

Contents

Information for Your Safety .... 2

Before use ................................ 8

Standard accessories .............9

Names and Functions of

Main Parts ..............................10

Touch operations ...................12

Inserting and removing the

battery or SD memory card

(optional) ................................ 14

Charging the battery .............15

Setting the clock .................... 16

Setting the menu ...................18

Taking pictures ...................... 19

Recording motion pictures ... 20

Viewing your pictures ........... 21

Deleting pictures ...................21

GPS and map functions ........ 22

Recording/viewing pictures

with a smartphone/tablet ...... 26

Reading the Owner’s Manual

(PDF format) ........................... 31

Supplied software .................. 32

Specifications ........................ 33

Digital Camera Accessory

System .................................... 36

Digital Camera Accessory

Order Form ............................. 37

Limited Warranty

(ONLY FOR U.S.A. AND

PUERTO RICO) ......................38

(ENG) VQT4S89 7

Before use

■

Camera handling

Keep the camera away from excessive vibration, force, or

●

pressure.
The camera is not dust resistant, splash resistant, or waterproof.

●

Avoid using the camera in places with excessive dust or sand, or
where water can come into contact with the camera.

■

Condensation (When the lens or the LCD monitor is fogged up)

Condensation may occur when the camera is exposed to sudden

●

changes of temperature or humidity. Avoid these conditions, which
may make the lens or LCD monitor dirty, cause mold, or damage
the camera.
If condensation does occur, turn off the camera and wait about two

●

hours before using it. Once the camera adjusts to the surrounding
temperature, the fogging will clear naturally.

About the compass

■

Information measured with this unit is simply a rough estimate.

• Please do not use for professional applications.

• When using this unit for mountain climbing, trekking, or
underwater, in addition to using the measured direction as a rough
estimate, please make sure to bring along a map and a dedicated
measuring instrument.

8 VQT4S89 (ENG)

Standard accessories

Check that all the accessories are supplied before using the camera.
Part numbers are as of January 2013. These may be subject to change.

Battery pack

DMW-BCM13PP

• Charge the battery
before use.

Battery pack is indicated as
battery pack or battery in the
text.

AC adaptor

VSK0768

Hand strap

VFC4297

USB connection
cable

K1HY08YY0031

• SD Memory Card, SDHC Memory Card and SDXC Memory Card
are indicated as card in the text.

• Cards are optional. You can record or play back pictures on the
built-in memory when you are not using a card.

• For information about optional accessories, refer to the “Digital
Camera Accessory System”.

• If any accessories are lost, customers should contact Panasonic’s
parts department at 1-800-833-9626 for further information about
obtaining replacement parts.

• Please dispose of all packaging appropriately.

• Keep small parts in a safe place out of the reach of children.

• The illustrations and screens in this manual may differ from the
actual product.

DVD

VFF1146

• Software:
Use it to install the software
on your PC.

• Map data

• Owner’s Manual for
advanced features

DVD is indicated as disc in
the text.

(ENG) VQT4S89 9

Names and Functions of Main Parts

Mode dial

Flash

Self-timer indicator/AF Assist Lamp

NFC antenna

Lens barrel

Lens

• Do not touch the lens barrier.

Speaker

Microphones

GPS status
indicator

[Wi-Fi] antenna

Built-in GPS antenna

Zoom lever

Motion picture
button

Camera [ON/OFF]
button

Shutter button

Tripod mount

• Ensure that the tripod is stable.

Card/Battery door

Release lever

DC coupler cover

*

Do not attach to a tripod with a 5.5 mm (0.22 inch) or longer screw. Doing so

may damage this unit.

Always use a genuine Panasonic AC adaptor (DMW-AC5PP:

●

optional).
When using an AC adaptor, ensure that the Panasonic DC coupler

●

(DMW-DCC14: optional) and AC adaptor (DMW-AC5PP: optional)
are used.

*

10 VQT4S89 (ENG)

[EXPOSURE] button
[MAP] button

[Wi-Fi] button

Playback button

Cursor buttons

[MENU/SET]

Charging lamp/
Wi-Fi connection lamp

LCD monitor

[Q.MENU]/
[

] (Delete/Cancel) button

[DISP.] button

We recommend using the supplied
hand strap to avoid dropping the
camera.

[HDMI] socket

*

[AV OUT/DIGITAL]
socket

• This socket is also
used when charging
the battery.

*

Do not connect any other cables except the HDMI micro cable (RP-CHEU15:

optional). Doing so may cause malfunction.

(ENG) VQT4S89 11

Touch operations

This camera’s touch screen senses pressure that is applied to the
screen.

Touch

To “touch” is to press the touch screen and then
pull the finger back again.

Touching is used to select icons or pictures, among
other actions.

Drag

To “drag” is to touch and slide your finger
across the touch screen surface.

Dragging (sliding your finger across the screen) is
used to scroll the pictures or change the range of the
pictures displayed.

Pinch (spread/pinch)

On the touch panel, spread (pinch out) your 2
fingers to zoom in, and pinch (pinch in) your 2
fingers to zoom out. You use it when zooming
in/out of playback pictures etc.

• You can also zoom in by quickly touching the touch
screen twice. (If the display was enlarged, it returns
to the same magnification ratio.)

12 VQT4S89 (ENG)

If the type of sheet made to protect LCD screens that are available

●

in the market is to be used, observe the precautions that are
contained with the sheet. (Some types of protective sheets may
impair the screen’s appearance and ease of operation.)
If the camera is used with a protective sheet available on the market

●

attached to its screen or if the screen is not very responsive, touch
the screen with a little more pressure.
If your hand is pressed against the touch screen when holding the

●

camera, the touch screen will not work properly.
Do not press on the LCD monitor with hard pointed tips, such as

●

ballpoint pens.
Do not press the touch screen with your fingernails.

●

Clean the LCD monitor with a soft, dry cloth if there are fingerprints

●

or other kinds of dirt on it.

(ENG) VQT4S89 13

Inserting and removing the battery or SD memory card (optional)

Make sure that the camera is turned off.

Slide the release lever ( ) to
the [OPEN] position and open
the card/battery door

Insert the battery and card,
making sure that their
orientation is correct

• Battery: Insert the battery all the way

• Card: Insert the card all the way firmly

Close the door

Slide the release lever to the [LOCK]
position.

■

To remove

• To remove battery:

Move lever in direction of
arrow.

firmly and check that it is
locked by lever (

until it clicks.

Lever

).

• To remove card:
Push the card until it clicks,
then pull the card out.

[OPEN] [LOCK]

Do not touch
the terminals
on the back of
the card.

Press

Always use genuine Panasonic batteries (DMW-BCM13PP).

●

If you use other batteries, we cannot guarantee the quality of this

●

product.
Keep the Memory Card out of reach of children to prevent

●

swallowing.
We recommend using a Panasonic card.

●

Pull out

14 VQT4S89 (ENG)

Charging the battery

• The battery that can be used with this unit is DMW-BCM13PP.

• The battery is not charged when the camera is shipped. Charge

the battery before use.

• Charge the battery with the AC adaptor (supplied) indoors

(10 °C to 30 °C (50 °F to 86 °F)).

Make sure that the camera is turned off.

Insert the battery to this unit, and then connect
this unit to the AC adaptor ( ) (supplied) or a
PC ( )

To the electrical outlet
USB connection cable (supplied)

■

Charging lamp ( )

On: Charging in progress (approx. 210 min. if fully depleted)
Off: Charging stops

When using the AC adaptor (supplied), observe the following points as
improper connections may cause malfunctions.

Do not use any other USB connection cables except the supplied

●

one or a genuine Panasonic USB connection cable (DMW-USBC1:
optional).
Do not use any other AC adaptors except the supplied one.

●

Do not use the AC adaptor (supplied) or the USB connection cable

●

(supplied) with other devices.

(ENG) VQT4S89 15

Setting the clock

The clock is not set when the camera is shipped.
Disconnect the unit from the AC adaptor (supplied).

Press the Camera [ON/OFF]
button ( )

Press [MENU/SET] ( )

Press to select the items
(year, month, day, hour,
minute, display order or time
display format), and press
to set

Press [MENU/SET] to set

• To cancel → Press [ ] button.

Confirm the setting and press [MENU/SET]

• To return to the previous screen, press [ ] button.

Press to select [Yes] and press [MENU/SET]
if automatically correcting time of day using the
GPS function

• To manually set date and time →select [No].

• When you select automatic time adjustment using the GPS
function, [GPS Setting] is set to [ON].

16 VQT4S89 (ENG)

When [Please set the home area] is displayed,
press [MENU/SET]

Press to set your home
area and press [MENU/SET]

The current time and home area are set.

■

Changing time settings

Select [Clock Set] from [Rec] or [Setup] menu, perform and .
Please see the next page on how to set the menu.

(ENG) VQT4S89 17

Setting the menu

Refer to the following procedures to operate the menus.

Example: Setting [AF Mode] from to in the [Program AE]

Mode

Press [MENU/SET] to display the menu

Switching to the [Rec] menu

Use cursor button to select [Rec] and
press [MENU/SET]

• The menu type can also be selected
by touch operations.

Press to select [AF Mode]
and then press [MENU/SET]

• Depending on the item, its setting may
not appear or it may be displayed in a
different way.

Press to select and
then press [MENU/SET] to set

Press [ ] button several
times to close the menu

18 VQT4S89 (ENG)

Taking pictures

Press the Camera [ON/OFF] button
( )

Set to the desired recording mode
( )

■

Recording mode

Take pictures with automatic settings.

Take pictures with automatic shutter speed and aperture value
settings.

Determine aperture, then record pictures.

Determine shutter speed, then record pictures.

Determine aperture and shutter speed, then record pictures.

Record pictures using pre-registered settings.

Record panorama pictures.

Take pictures using Scene modes.

Take pictures by selecting your preferred picture effect.

Take a picture

Shutter button

Press halfway

(press lightly and focus)

Press fully

(press the button

all the way to record)

(ENG) VQT4S89 19

Recording motion pictures

You can record motion pictures with audio (stereo). Zoom can also be
used during recording.

Press the motion picture button
( ) to start recording

Press the motion picture button
( ) again to end recording

Remaining recording time (approx.)

Elapsed recording time

Immediately release the motion picture button after pressing it all the

●

way.
You can continuously record a motion picture in [MP4] for up to

●

29 minutes 59 seconds or approx. 4 GB. (Since recording in [MP4]
with [FHD/30p] creates larger files, the recording time for such
motion pictures will be shorter than 29 minutes 59 seconds.)
If [Rec Quality] of [AVCHD] motion pictures is set to [FHD], you

●

can continuously record a motion picture for up to 29 minutes
59 seconds.

If the surrounding temperature is high, or a motion picture is

●

recorded continuously, is displayed and recording may be
stopped halfway through to protect the camera.

Motion pictures cannot be recorded in the built-in memory.

●

20 VQT4S89 (ENG)

Viewing your pictures

Press the Playback button ( )

Drag your finger across the screen,
and select the picture to be played
back

By holding down the Playback button while the camera is off, you

●

can turn the camera on in Playback Mode.
To play back a motion picture, touch after selecting a picture.

●

To switch to Recording Mode, press the playback button again or

●

press the shutter button halfway during playback.

Deleting pictures

Deleted pictures cannot be recovered.

Press [ ] button ( ) to delete the displayed
picture

Press to select [Yes] and then press
[MENU/SET] ( )

(ENG) VQT4S89 21

GPS and map functions

Before using the camera, be sure to read “License Agreement
for Place Name and Map Data” (Owner’s Manual for advanced
features).

This camera can record the location information of a place where a
picture was taken on the pictures.
The camera can also automatically adjust the time or display a place
where a picture was taken on a map during playback.

Your Panasonic Lumix digital still camera is GPS-equipped which can
automatically record the precise location coordinates of where the
photo was taken. The specific physical address of this location can
easily be derived from this information.
If you upload such “geotagged” photos to the Internet, a social
networking site or any other electronic media, the precise location of
where the photo was taken will remain embedded in the photo and
can be viewed by others.
Therefore, when taking digital still photos, care should be taken in
determining whether you wish to have the GPS feature enabled or
disabled.

22 VQT4S89 (ENG)

Using the GPS function to execute positioning

Press [MENU/SET] ( )

Press to select [GPS]
menu and press [MENU/SET]

Press to select
[GPS Setting] and press
[MENU/SET]

Press to select [ON] and press [MENU/SET]

• A message appears on the screen. After confirming the
message, press [MENU/SET].

■

When [GPS Setting] is [ON], the GPS function works even if the
camera is turned off.

• Electromagnetic waves from the camera can affect instruments
and meters. During takeoff and landing of airplanes or in other
restricted areas, set [Airplane Mode] to [ON] and turn off the
camera.

• When [GPS Setting] is [ON] and [Airplane Mode] is [OFF], power
will drain from the battery even if the camera is turned OFF.

(ENG) VQT4S89 23

GPS and map functions

●

Positioning will take time in environments where it is difficult to
receive the signals from the GPS satellites. For details, refer
to “Using the GPS function to record the location of a picture”
(Owner’s Manual for advanced features).

●

Even if GPS reception is good, it will take approx. 2 to 3
minutes to successfully execute positioning under the following
conditions;

• When positioning is executed for the first time

• When [GPS Setting] was set to [OFF]

• When [Airplane Mode] was set to [ON] and the camera was
turned off

• When the battery was removed

■

Displaying the status and result of positioning

The icons that indicate the status and result of positioning will
appear on the LCD monitor. When positioning is successful,
camera will search the place name information (name of place and
landmark) inside its internal database and display it.

GPS reception icon

The same number of icons as the
number of the GPS satellites (from
which radio signals are successfully
received) stop flashing and light.
If the three bars of the GPS reception
icon do not light and the icon turns
off, it means that positioning was
unsuccessful.

Positioning result icons

(Time elapsed after successful

Place name
information

24 VQT4S89 (ENG)

positioning) (minute)

: Positioning failed. No location

information/place name information
available.

Positioning

executed

successfully

(blue)

Confirming the place where you took a picture

using a map

You can display a map showing the location where a picture was
taken or your current location.

If you copy the map data stored on the supplied DVD to a memory

●

card, you can display more detailed maps. For details, refer to
“Using the map data on the disc (supplied)” (Owner’s Manual for
advanced features).

Press [MAP] button ( ) in
playback mode

Touch the screen to display the current location
(if positioning is currently available)

• As with zooming in/out of pictures, you can also zoom in/out
of the map by operating the zoom lever or by using the pinch
function.

• You can drag the screen or press the cursor button to operate
the display location of a map.

• When you press the [ ] button, it will return to the previous
display.

■

Displaying the recording location

• When you press the [DISP.] button, the pictures that were
recorded nearby will be displayed in a list.

Place where you took

the selected picture

Place where you took

the pictures displayed

(

in a list (

)

)

Touch to display another picture
Touch to narrow down the

pictures to be displayed
Picture list

Touch to display another picture

(ENG) VQT4S89 25

Recording/viewing pictures with a smartphone/tablet

You can use the Wi-Fi function to connect to another device through
wireless LAN (a system that exchanges information with radio waves
without using cables), record pictures from an away location, and
transfer pictures saved in this unit to a TV or PC.
This section describes how to make a Wi-Fi connection between this
unit and a smartphone/tablet to record pictures using the smartphone/
tablet and to transfer pictures to the smartphone/tablet.

Installing “Image App”

If you install “Image App” to your smartphone/tablet, you can operate
this unit from an away location to record or play back pictures.
The “Panasonic Image App” is an application provided by Panasonic
that allows your smartphone/tablet to perform the following operations
of a Wi-Fi-compatible LUMIX. (“Panasonic Image App” is indicated as
“Image App” in the text.)

■

Version

1.2 or above

■

Supported OS

Android 2.2 - Android 4.2
iOS 4.3 - iOS 6.0

■

Installation procedure

Connect your smartphone/tablet to the Internet, and please install
“Image App” from the following site.

• “Google Play™ Store” (for Android)

• “App Store

• When downloading the app on a mobile network, high packet
communication fees may be incurred depending on the details of
your contract.

• To connect this unit with [Wi-Fi Direct], Android OS 4.0 or above is
required and the device must be compatible with Wi-Fi Direct.

• The service may not be able to be used properly depending on the
type of smartphone/tablet being used. For compatible devices, see
the following support site.
http://panasonic.jp/support/global/cs/dsc/
(This site is available in English only.)

SM

” (for iOS)

26 VQT4S89 (ENG)

Easily connect to a smartphone/tablet

Use the NFC (Near Field Communication) function to easily connect
this unit to a smartphone/tablet with Wi-Fi for remote recording and to
send pictures to the smartphone/tablet.

• This function can be used with NFC compatible devices with Android
(2.3.3 or above). (Not available in certain models)

■

Preparation on the smartphone/tablet side

• Install “Image App” in advance

• Set Wi-Fi function to “ON”
(For information on how to adjust settings, please read the manual
for your smartphone/tablet)

When manually connecting without the NFC function

■

Operating this unit

Press the [Wi-Fi] button
Press to select [New Connection] and press
[MENU/SET]
Press to select [Remote Shooting] and press [MENU/SET]

■

On your smartphone/tablet

Select the SSID displayed on the camera, and enter the
password

• The SSID displayed differs depending on the connection method.

• To connect [Via Network], select a wireless access point and adjust
the settings.

Start up “Image App”

• When the connection is complete, live images captured by the
camera will be displayed on the “Image App” screen.

(ENG) VQT4S89 27

Recording/viewing pictures with a smartphone/tablet

Connecting to a smartphone/tablet

Start up “Image App” on your smartphone/
tablet

Place your smartphone/tablet to the side of this
unit

Place over this area
(within 5 mm (0.20 inch))

Place the NFC area of your smartphone/tablet over the part of
this unit as shown in the figure below.

• Do not bump your smartphone/tablet strongly against this unit.
(The smartphone/tablet or this unit may get scratched)

• For information on how to use NFC compatible devices, please
contact the device manufacturer.

• If there is no immediate reaction, slightly move the position
where the smartphone/tablet was placed.

Press to select [Yes] and press [MENU/SET]

Place your smartphone/tablet over this area of
the unit again

• When the connection is complete, live images captured by the
camera will be displayed on your smartphone/tablet.

• Connected smartphone/tablet is registered to this unit. From
the next time and on, you can connect by performing steps
and .

28 VQT4S89 (ENG)

Taking pictures via a smartphone/tablet (remote recording)

Select [ ] on a smartphone/tablet

• The recorded images are saved in the camera.

• Some settings are not available.

• The screen differs depending on the operating system.

Cannot be set for recording AVCHD motion pictures at [60p] in

●

[FHD].
If the internal camera temperature rises because the surrounding

●

temperature is high or a motion picture is recorded continuously,
recording may be stopped halfway through to protect the camera.
Also, the picture quality setting change message may be displayed
when the recording starts.

Playing back pictures in the camera

Select [ ] on a smartphone/tablet

• You can save pictures on the smartphone/tablet.

• You can send pictures to a WEB service, etc.

• The screen differs depending on the operating system.

You cannot play back motion pictures stored in the camera. Save

●

the motion picture on your smartphone/tablet, and then playback.

(ENG) VQT4S89 29

Recording/viewing pictures with a smartphone/tablet

Transferring a still picture easily to your

smartphone/tablet

When transferring just 1 still picture to your smartphone/tablet with
“Image App” installed, you can use the NFC function to easily send the
picture.

Start up “Image App” on your smartphone/
tablet

Display the still picture to be transferred to your
smartphone/tablet on the 1-picture screen (full
screen)

Place your smartphone/tablet to the side of this
unit

The still picture displayed on this unit is transferred to your
smartphone/tablet.

It may take several minutes to complete the picture transfer

●

depending on the environment used.

30 VQT4S89 (ENG)

Reading the Owner’s Manual

More detailed instructions on the operation of this camera are
contained in “Owner’s Manual for advanced features (PDF format)” in
the supplied disc. Install it on your PC to read it.

To read the supplied DVD, use a DVD drive with single-sided dual
layer support.

■

For Windows

(PDF format)

Turn the PC on and insert the disc containing
the Owner’s Manual (supplied)

Click the [Owner’s Manual]

Select the desired
language and then click
[Owner’s Manual] to install

To return to the install menu.

Double-click the “Owner’s
Manual” shortcut icon on
the desktop

■

When the Owner’s Manual (PDF format) will not open

You will need Adobe Acrobat Reader 5.0 or later, or Adobe Reader

7.0 or later to browse or print the Owner’s Manual (PDF format).

• You can download and install a version of Adobe Reader that you
can use with your OS from the following website.
http://get.adobe.com/reader/otherversions/

(ENG) VQT4S89 31

Supplied software

The supplied disc contains the following software.
Install the software on your computer to use.

Pictures can be captured to a PC, and can be viewed,

PHOTOfunSTUDIO

9.1 PE

LUMIX Map Tool

1.1

LoiLoScope
(30-day full-trial
version)

For details about operating environment and usage, please read
“Owner’s Manual for advanced features” (PDF format) or the manuals
for each software.

PHOTOfunSTUDIO / LoiLoScope are not compatible with Mac.

●

Preparations:

• Check the environment of your PC.

• Before inserting the disc, close all running applications.

Insert the supplied disc in the computer drive and then install the
software.

■

For Windows

Click on the [Applications] on the install menu

■

For Mac (LUMIX Map Tool)

Double-click the [LUMIX Map Tool.pkg] within
[Application] - [MAPTOOL] of the DVD (supplied)

organized, printed, etc. Also, still pictures can be
corrected and motion pictures can be edited.

• Compatible OS: Windows 8 / 7 / Vista / XP

The map data recorded on the DVD (supplied) can be
copied to your card.

• Compatible OS: Windows 8 / 7 / Vista / XP

You can edit motion pictures easily.
This will only install a shortcut to the trial version
download site.
For details about using LoiLoScope, please download
and see the manual from the following site.
http://loilo.tv/product/20/

• Compatible OS: Windows 8 / 7 / Vista / XP

Mac OS X v10.4 / v10.5 / v10.6 /
v10.7 / v10.8

Installing supplied software

32 VQT4S89 (ENG)

Specifications

Specifications are subject to change without notice.

Digital Camera: Information for your safety

Power Source DC 5.1 V

Power
Consumption

Camera effective
pixels

Image sensor 1/2.3″ MOS sensor,

Lens

[NANO SURFACE
COATING]

Image Stabilizer Optical method
Focus range

P / A / S / M 50 cm (1.6 feet) (Max. Wide) /

Macro /
Intelligent
Auto /
Motion picture

Scene Mode The focus ranges listed above may vary

Shutter system Electronic shutter + Mechanical shutter
Minimum

Illumination
Shutter speed 4 seconds to 1/2000th of a second

Exposure (AE) Program AE (P) / Aperture-priority AE (A) /

Metering Mode [Multi Metering] / [Center Weighted] / [Spot]

When recording: 1.7 W
When playing back: 1.1 W

18,100,000 pixels

total pixel number 18,900,000 pixels
Primary color filter

Optical 20 x zoom
f=4.3 mm to 86.0 mm
(35 mm film camera equivalent:
24 mm to 480 mm) /
F3.3 (Max. Wide) to F6.4 (Max. Tele)

2 m (6.6 feet) (Max. Tele) to
3 cm (0.098 feet) (Max. Wide) /

1 m (3.3 feet) (Max. Tele) to
(5 × to 7 × is 2 m (6.6 feet) to )

depending on the selected Scene Mode.

Approx. 10 lx (when i-Low light is used, the
shutter speed is 1/30th of a second)

[Starry Sky] Mode: 15 seconds, 30 seconds

Shutter-priority AE (S) / Manual exposure (M)

(ENG) VQT4S89 33

Specifications

LCD monitor 3.0″ TFT LCD (4:3) (Approx. 921,600 dots)

Microphones Stereo
Speaker Monaural
Recording media Built-in Memory (Approx. 12 MB)

Recording file
format

Still picture JPEG (based on Design rule for Camera File

Motion pictures

Audio
compression
format

Interface

Digital USB 2.0 (High Speed)
Analog video NTSC Composite
Audio Audio line output (Monaural)

Terminal HDMI: MicroHDMI TypeD

Dimensions

Mass (Weight) With card and battery: Approx. 198

Operating
temperature

Operating
humidity

Language select [ENGLISH] / [ESPAÑOL]

(field of view ratio about 100%) / Touch screen

SD Memory Card / SDHC Memory Card /
SDXC Memory Card

system, based on Exif 2.3 standard /
DPOF corresponding) / MPO

AVCHD / MP4
AVCHD: Dolby

MP4: AAC (2 ch)

AV OUT/DIGITAL: Dedicated jack (8 pin)
Approx. 108.3 mm (W) x 58.9 mm (H) x 27.7 mm (D)

[4.26″ (W) x 2.32″ (H) x 1.09″ (D)]
(excluding the projection part)

Excluding card and battery: Approx. 172 (0.379 lb)
0 °C to 40 °C (32 °F to 104 °F)

10%RH to 80%RH

®

Digital (2 ch)

(0.437 lb)

34 VQT4S89 (ENG)

Wireless transmitter

Compliance
standard

Frequency range

IEEE 802.11b/g/n
(standard wireless LAN protocol)

2412 MHz to 2462 MHz (1 - 11ch)

used
(central
frequency)

Encryption

Wi-Fi compliant WPA™ / WPA2™

method
Access method Infrastructure mode

AC adaptor
(Panasonic VSK0768): Information for your safety

Input ~ 110 V to 240 V, 50/60 Hz, 0.2 A

Output

5 V, 800 mA

Battery pack (lithium-ion)
(Panasonic DMW-BCM13PP): Information for your safety

Voltage / capacity

3.6 V / 1250 mAh

(ENG) VQT4S89 35

Digital Camera Accessory System

Description Accessory#

1

Battery pack
DC coupler
AC adaptor
Marine case

*

2

*

2*3

*

4

*

USB connection cable DMW-USBC1
AV cable DMW-AVC1
HDMI micro cable RP-CHEU15

1

*

The battery pack can be charged from the camera using the AC adaptor

(supplied).

2

*

The AC adaptor (optional) can only be used with the designated Panasonic

DC Coupler (optional). The AC adaptor (optional) cannot be used by itself.

3

*

This AC adaptor (optional) cannot be used to charge the battery pack. Use

supplied AC adaptor to charge the battery pack.

4

*

NFC functions cannot be used while using a marine case.

Product numbers are correct as of January 2013. These may be

●

subject to change.
Accessories and/or model numbers may vary between countries.

●

Consult your local dealer.

DMW-BCM13
DMW-DCC14
DMW-AC5
DMW-MCTZ40

36 VQT4S89 (ENG)

Digital Camera Accessory Order Form

Please photocopy this form when placing an order.

1. Digital Camera Model #

2. Items Ordered
Accessory # Description Price Each Quantity Total Price

Shipping & Handling

$6.95

Subtotal

Your State & Local Sales Tax

Total

3. Method of payment (check one)

American Express
VISA Credit Card #
MasterCard Expiration Date
Discover Customer Signature

(Please do not send cash)

4. Shipping information (UPS delivery requires complete street address)

Ship To:
Mr.
Mrs.
Ms.

First Last

Street Address

City

TO OBTAIN ANY OF OUR DIGITAL CAMERA ACCESSORIES YOU CAN DO ANY OF

VISIT YOUR LOCAL PANASONIC DEALER

CALL PANASONIC’S ACCESSORY ORDER LINE AT 1-800-332-5368

MAIL THIS ORDER TO: PANASONIC NATIONAL PARTS CENTER

State Zip

THE FOLLOWING:

OR

[6 AM-6 PM M-F, PACIFIC TIME]

20421 84th Ave S., Kent, WA 98032

OR

Phone#:
Day ( )

Night ( )

(ENG) VQT4S89 37

Limited Warranty (ONLY FOR U.S.A. AND PUERTO RICO)

Panasonic Consumer Marketing Company of North America,
Division of Panasonic Corporation of North America

One Panasonic Way, Secaucus, New Jersey 07094

Panasonic Products Limited Warranty

Limited Warranty Coverage (For USA and Puerto Rico Only)

If your product does not work properly because of a defect in materials or
workmanship, Panasonic Consumer Marketing Company of North America
(referred to as “the warrantor”) will, for the length of the period indicated on the
chart below, which starts with the date of original purchase (“warranty period”),
at its option either (a) repair your product with new or refurbished parts, (b)
replace it with a new or a refurbished equivalent value product, or (c) refund
your purchase price. The decision to repair, replace or refund will be made by
the warrantor.

Product or Part Name Parts Labor

Digital Camera 1 Year 1 Year
All included Accessories

(Except Non-Rechargeable Batteries)
Only Non-Rechargeable Batteries 10 Days Not Applicable

During the “Labor” warranty period there will be no charge for labor. During the
“Parts” warranty period, there will be no charge for parts. This Limited Warranty
excludes both parts and labor for non-rechargeable batteries, antennas, and
cosmetic parts (cabinet). This warranty only applies to products purchased and
serviced in the United States or Puerto Rico. This warranty is extended only to
the original purchaser of a new product which was not sold “as is”.

90 Days Not Applicable

38 VQT4S89 (ENG)

Mail-In Service

For assistance in the U.S.A. and Puerto Rico in obtaining repairs, please ship
the product prepaid to:

Panasonic Exchange Center
4900 George McVay Drive
Suite B
McAllen, TX 78503
[e-mail]

Online Repair Request

To submit a new repair request and for quick repair status visit our Web Site at
www.panasonic.com/repair.

When shipping the unit, carefully pack, include all supplied accessories listed in
the Owner’s Manual, and send it prepaid, adequately insured and packed well in
a carton box. When shipping Lithium Ion batteries please visit our Web Site at
www.panasonic.com/BatteryHandling as Panasonic is committed to providing
the most up to date information. Include a letter detailing the complaint, a return
address and provide a daytime phone number where you can be reached. A
valid registered receipt is required under the Limited Warranty.

IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE
PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/PROOF
OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT PAID AND
PLACE OF PURCHASE. CUSTOMER WILL BE CHARGED FOR THE REPAIR
OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE.

Limited Warranty Limits And Exclusions

This warranty ONLY COVERS failures due to defects in materials or
workmanship, and DOES NOT COVER normal wear and tear or cosmetic
damage. The warranty ALSO DOES NOT COVER damages which occurred
in shipment, or failures which are caused by products not supplied by the
warrantor, or failures which result from accidents, misuse, abuse, neglect,
mishandling, misapplication, alteration, faulty installation, set-up adjustments,
misadjustment of consumer controls, improper maintenance, power line surge,
lightning damage, modification, introduction of sand, humidity or liquids,
commercial use such as hotel, office, restaurant, or other business or rental
use of the product, or service by anyone other than a Factory Service Center or
other Authorized Servicer, or damage that is attributable to acts of God.

(ENG) VQT4S89 39

THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER
“LIMITED WARRANTY COVERAGE”.
THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING
OUT OF ANY BREACH OF THIS WARRANTY.

(As examples, this excludes damages for lost time, travel to and from the
servicer, loss of or damage to media or images, data or other memory or
recorded content. The items listed are not exclusive, but for illustration only.)

ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY
OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED
WARRANTY.

Some states do not allow the exclusion or limitation of incidental or
consequential damages, or limitations on how long an implied warranty lasts, so
the exclusions may not apply to you.
This warranty gives you specific legal rights and you may also have other rights
which vary from state to state. If a problem with this product develops during
or after the warranty period, you may contact your dealer or Service Center.
If the problem is not handled to your satisfaction, then write to the warrantor’s
Consumer Affairs Department at the addresses listed for the warrantor.

PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED
WARRANTY, ARE YOUR RESPONSIBILITY.

40 VQT4S89 (ENG)

Customer Services Directory (United States and Puerto Rico)

Obtain Product Information and Operating Assistance; locate your
nearest Dealer or Service Center; purchase Parts and Accessories; or
make Customer Service and Literature requests by visiting our Web
Site at:
http://www.panasonic.com/help
or, contact us via the web at:
http://www.panasonic.com/contactinfo

You may also contact us directly at:
1-800-211-PANA (7262)
Monday-Friday 9am-9pm, Saturday-Sunday 10am-7pm EST

For hearing or speech impaired TTY users, TTY: 1-877-833-8855

Accessory Purchases (United States and Puerto Rico)

Purchase Parts, Accessories and Instruction Books online for all Panasonic
Products by visiting our Web Site at:
http://www.pstc.panasonic.com
Or, send your request by E-mail to:
[e-mail]
You may also contact us directly at:
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only)
(Monday-Friday 9am-9pm EST)
Panasonic National Parts Center
20421 84th Ave S., Kent, WA 98032
(We accept Visa, MasterCard, Discover Card, American Express)

For hearing or speech impaired TTY users, TTY: 1-866-605-1277

As of October 2012

(ENG) VQT4S89 41

• HDMI, the HDMI Logo, and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC in
the United States and other countries.

• HDAVI Control™ is a trademark of Panasonic
Corporation.

• “AVCHD”, “AVCHD Progressive” and the
“AVCHD Progressive” logo are trademarks of
Panasonic Corporation and Sony Corporation.

•

Manufactured under license from Dolby
Laboratories.
are trademarks of Dolby Laboratories.

• SDXC Logo is a trademark of SD-3C, LLC.

• QuickTime and the QuickTime logo are
trademarks or registered trademarks of Apple
Inc., used under license therefrom.

• Windows and Windows Vista are either
registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other
countries.

• Mac and Mac OS are trademarks of Apple Inc.,
registered in the U.S. and other countries.

This product incorporates the following software:
(1) the software developed independently by or for Panasonic Corporation,
(2) the software owned by third party and licensed to Panasonic Corporation

and/or,

(3) open sourced software including the software developed by the OpenSSL

Project for use in the OpenSSL Toolkit (http://www.openssl.org/), and the
software written by Eric Young ([e-mail]).

For the software categorized as (1) and (2), please view the information
by pressing [MENU/SET], displaying [Setup] → [Version Disp.], and then
pressing [MENU/SET]. For the software categorized as (3), please refer to
the applicable license terms in the following “Owner’s Manual for advanced
features (PDF format)”.

Dolby and the double-D symbol

42 VQT4S89 (ENG)

• App Store is a service mark of Apple Inc.

• Android and Google Play are trademarks or registered trademarks of Google Inc.

• The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance.

• The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi Alliance.

• “Wi-Fi”, “Wi-Fi Protected Setup”, “Wi-Fi Direct”, “WPA” and “WPA2” are marks or
registered marks of the Wi-Fi Alliance.

• DLNA, the DLNA Logo and DLNA CERTIFIED are trademarks, service marks, or
certification marks of the Digital Living Network Alliance.

• This product uses “DynaFont” from DynaComware Corporation. DynaFont is a
registered trademark of DynaComware Taiwan Inc.

• Other names, company names, and product names mentioned in these
instructions are trademarks or registered trademarks of the companies
concerned.

-If you see this symbol-

Information on Disposal in other Countries outside
the European Union

This symbol is only valid in the European Union. If you
wish to discard this product, please contact your local
authorities or dealer and ask for the correct method of
disposal.

Panasonic Consumer Marketing Company of North America,
Division of Panasonic Corporation of North America

One Panasonic Way, Secaucus, NJ 07094
© Panasonic Corporation 2013

Printed in Japan