Panasonic DMC-ZS100, DMC-ZS60 Basic Manual

Basic Owner’s Manual

Digital Camera

Model No.

DMC-ZS60

Please read these instructions carefully before using this product, and save this manual for future use.

More detailed owner’s manual is available in “Owner’s Manual for advanced features (PDF format)”. To read it, download it from the website. (→50)

If you have any questions, visit: USA : http://shop.panasonic.com/support Canada : www.panasonic.ca/english/support

DMC-ZS100 DMC-ZS60

DMC-ZS100

SQT1166

M1215KZ0

Dear Customer,

Date of Purchase Dealer Phone No.

Dealer Purchased From Model No.

Dealer Address Serial No.

Thank you for choosing Panasonic!

You have purchased one of the most sophisticated and reliable products on the market today. Used properly, we’re sure it will bring you and your family years of enjoyment. Please take time to fill in the information below. The serial number is on the tag located on the underside of your camera. Be sure to retain this manual as your convenient camera information source.

Please note that the actual controls and components, menu items, etc. of your Digital Camera may look somewhat different from those shown in the illustrations in this Owner’s Manual.

Carefully observe copyright laws.

• Recording of pre-recorded tapes or discs or other published or broadcast material for purposes other than your own private use may infringe copyright laws. Even for the purpose of private use, recording of certain material may be restricted.

For the U.S.A. and Canada only

A lithium ion battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY for information on how to recycle this battery.

SQT1166 (ENG)

Information for Your Safety

WARNING:

To reduce the risk of fire, electric shock or product damage,

• Do not expose this unit to rain, moisture, dripping or splashing.

• Use only the recommended accessories.

• Do not remove covers.

• Do not repair this unit by yourself. Refer servicing to qualified service

personnel.

The socket outlet shall be installed near the equipment and shall be easily accessible.

■

Product identification marking

Product Location

Digital camera Bottom

SQT1166 (ENG)

THE FOLLOWING APPLIES ONLY IN THE U.S.A.

Certification and Compliance

See Camera for the certification and compliance mark specific to that device.

1 Select [Wi-Fi] in the [Setup] menu

2 Select [Wi-Fi Setup] in the [Wi-Fi]

Press

to select [Approved Regulations], and press [MENU/SET]

Contains FCC ID : VPYLBXN604

This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65. This equipment has very low levels of RF energy that are deemed to comply without testing of specific absorption ratio (SAR).

SQT1166 (ENG)

DMC-ZS100

DMC-ZS60

THE FOLLOWING APPLIES ONLY IN THE U.S.A.

FCC Note:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: To assure continued compliance, follow the attached installation instructions and use only shielded interface cables with ferrite core when connecting to computer or peripheral devices. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Declaration of Conformity Trade Name: Panasonic Model No.: DMC-ZS100

DMC-ZS60 Responsible Party: Panasonic Corporation of North America

Support Contact: http://www.panasonic.com/contactinfo

Two Riverfront Plaza, Newark, NJ 07102-5490

SQT1166 (ENG)

THE FOLLOWING APPLIES ONLY IN CANADA.

Certification and Compliance

See Camera for the certification and compliance mark specific to that device.

1 Select [Wi-Fi] in the [Setup] menu

2 Select [Wi-Fi Setup] in the [Wi-Fi]

Press

to select [Approved Regulations], and press [MENU/SET]

CAN ICES-3(B)/NMB-3(B)

Contains IC : 772C-LBXN604

This device complies with Industry Canada’s license-exempt RSSs. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that are deemed to comply without testing of specific absorption ratio (SAR).

SQT1166 (ENG)

■

About the AC adaptor (supplied)

CAUTION!

To reduce the risk of fire, electric shock or product damage,

• Do not install or place this unit in a bookcase, built-in cabinet or in

another confined space. Ensure this unit is well ventilated.

AC adaptor

This AC adaptor operates on AC between 110V and 240V. But

• In the U.S.A. and Canada, the AC adaptor must be connected to a 120V AC

power supply only.

• When connecting to an AC supply outside of the U.S.A. or Canada, use a plug

adaptor to suit the AC outlet configuration.

SQT1166 (ENG)

■

About the battery pack

CAUTION

Battery pack (Lithium ion battery pack)

• Use the specified unit to recharge the battery pack.

• Do not use the battery pack with equipment other than the specified unit.

• Do not get dirt, sand, liquids, or other foreign matter on the terminals.

• Do not touch the plug terminals (+ and −) with metal objects.

• Do not disassemble, remodel, heat or throw into fire.

If any electrolyte should come into contact with your hands or clothes, wash it off thoroughly with water. If any electrolyte should come into contact with your eyes, never rub the eyes. Rinse eyes thoroughly with water, and then consult a doctor.

CAUTION

• Danger of explosion if battery is incorrectly replaced. Replace only with the type recommended by the manufacturer.

• When disposing of the batteries, please contact your local authorities or dealer and ask for the correct method of disposal.

• Do not heat or expose to flame.

• Do not leave the battery(ies) in a car exposed to direct sunlight for a long period of time with doors and windows closed.

Warning

Risk of fire, explosion and burns. Do not disassemble, heat above 60 °C (140 °F) or incinerate.

SQT1166 (ENG)

■

Cautions for Use

• Use a “High Speed HDMI micro cable” with the HDMI logo. Cables that do not comply with the HDMI standards will not work. “High Speed HDMI micro cable” (Type D-Type A plug, up to 2 m (6.6 feet) long)

Keep this unit as far away as possible from electromagnetic equipment (such as microwave ovens, TVs, video games etc.).

• If you use this unit on top of or near a TV, the pictures and/or sound on this unit may be disrupted by electromagnetic wave radiation.

• Do not use this unit near cell phones because doing so may result in noise adversely affecting the pictures and/or sound.

• Recorded data may be damaged, or pictures may be distorted, by strong magnetic fields created by speakers or large motors.

• Electromagnetic wave radiation may adversely affect this unit, disturbing the pictures and/or sound.

• If this unit is adversely affected by electromagnetic equipment and stops functioning properly, turn this unit off and remove the battery or disconnect AC adaptor (supplied)/AC adaptor (DMW-AC10PP: optional). Then reinsert the battery or reconnect AC adaptor and turn this unit on.

Do not use this unit near radio transmitters or high-voltage lines.

• If you record near radio transmitters or high-voltage lines, the recorded pictures and/or sound may be adversely affected.

SQT1166 (ENG)

Contents

■

Information for Your Safety ...................... 3

Preparations

■

Before use.................................................11

■

Standard accessories ............................. 12

■

Names and Functions of Main Parts ..... 14

■

Inserting and removing the battery

or SD memory card (optional) ................ 17

■

Charging the battery ............................... 18

■

Setting the clock ..................................... 20

Basics

■

Basic operations ..................................... 21

■

Setting the menu ..................................... 28

Recording

■

Taking pictures with automatic settings

(Intelligent Auto Mode) ........................... 29

■

Recording 4K photos .............................. 30

■

[Post Focus] ............................................ 33

■

Recording motion pictures .................... 36

■

[4K Live Cropping] .................................. 39

In this manual, examples use illustrations and screens of DMC-ZS100 unless otherwise indicated.

■

About the symbols in the text

Indicates that the menu can be set by pressing [MENU/SET] button.

In this Owner’s Manual, steps for setting a menu item are described as follows:

→ [Rec] → [Quality] → [ ]

Playback

■

Viewing your pictures ............................. 41

■

[Light Composition] ................................ 42

Wi-Fi

■

What you can do with the

function ........................................ 44

Wi-Fi

■

Operating the camera by connecting

it to a smartphone ................................... 45

Others

■

Downloading software ............................ 48

■

Reading the Owner ’s Manual

(PDF format) ............................................ 50

■

List of monitor/viewfinder displays ....... 52

■

Menu list ................................................... 56

■

Q&A Troubleshooting ............................ 59

■

Specifications .......................................... 61

■

Digital Camera Accessory System ........ 67

■

Limited Warranty

(ONLY FOR U.S.A.) .................................. 68

■

Limited Warranty

(ONLY FOR CANADA) ............................. 72

SQT1166 (ENG)

Preparations Preparations

Before use

■

Camera handling

Keep the camera away from excessive vibration, force, or pressure.

●

The camera is not dust resistant, splash resistant, or waterproof.

●

Avoid using the camera in places with excessive dust or sand, or where water can come into contact with the camera. Do not allow camera to come into contact with pesticides or volatile substances (can cause

●

surface damage or coating to peel).

■

Condensation (When the lens, the monitor or the viewfinder is fogged up)

Condensation may occur when the camera is exposed to sudden changes of temperature

●

or humidity. Avoid these conditions, which may make the lens, the monitor or the viewfinder dirty, cause mold, or damage the camera. If condensation does occur, turn off the camera and wait about two hours before using it.

●

Once the camera adjusts to the surrounding temperature, the fogging will clear naturally.

■

Caring for your camera

To clean your camera, remove the battery, the DC coupler (DMW-DCC11: optional) or a

●

card, or disconnect the power plug from the outlet, and wipe with a soft, dry cloth. Do not press the monitor with excessive force.

●

Do not press the lens with excessive force.

●

Do not keep rubber or plastic products in contact with the camera for a long period of time.

●

Do not use solvents such as benzine, thinner, alcohol, kitchen detergents, etc., to clean the

●

camera, since it may deteriorate the external case or the coating may peel off. Do not leave the camera with the lens facing the sun, as rays of light from the sun may

●

cause it to malfunction. Do not extend the supplied cord or cable.

●

While the camera is accessing the card (for an operation such as picture writing, reading,

●

deleting, or formatting), do not turn off the camera or remove the battery, card, AC adaptor (supplied)/AC adaptor (DMW-AC10PP: optional) or DC coupler (DMW-DCC11: optional). The data on the card may be damaged or lost due to electromagnetic waves, static

●

electricity or breakdown of the camera or the card. We recommend storing important data on a PC etc. Do not format the card on your PC or other equipment. Format it on the camera only to

●

ensure proper operation.

SQT1166 (ENG)

Preparations

ZS100

Standard accessories

Check that all the accessories are supplied before using the camera. Part numbers are as of January 2016. These may be subject to change.

Battery pack

DMW-BLG10PP

• Charge the battery before use.

• Battery pack is indicated as battery pack or battery in the text.

AC adaptor

SAE0012A

Shoulder strap adaptor (2)

SYQ0694

Hand strap

VFC4297

USB connection cable

K1HY04YY0106

• Use when attaching a shoulder strap (commercially available). For details, refer to “Owner’s Manual for advanced features (PDF format)”.

SQT1166 (ENG)

Preparations

ZS100

• Cards are optional. (SD Memory Card, SDHC Memory Card and SDXC Memory Card are indicated as card in the text.)

– This unit is compatible with UHS-

memory cards.

 UHS Speed Class 3 standard SDHC/SDXC

– The following SD standard-based cards (Panasonic brand recommended) can

be used. Operation has been confirmed when using a Panasonic brand card. SD Memory Card (512 MB to 2 GB)/SDHC Memory Card (4 GB to 32 GB)/ SDXC Memory Card (48 GB to 128 GB)

– Depending on recording conditions, the required card differs.

(For U.S.A. only)

If accessories are lost, customers can visit us at http://shop.panasonic.com/support

• for further information about obtaining replacement parts.

(For Canada only)

If any accessories are lost, customers in Canada should visit our support page at

• www.panasonic.ca/english/support for further information about obtaining replacement parts.

• Please dispose of all packaging appropriately.

• Keep the shoulder strap adaptors out of reach of children to prevent swallowing.

• The illustrations and screens in this manual may differ from the actual product.

SQT1166 (ENG)

Preparations

ZS100

Names and Functions of Main Parts

1 2 3

4 5 6

SQT1166 (ENG)

26 27

28 29

15 17 7 16

18 19 20 13

33 34 35 36 37 32

9 10

ZS60

1 2

Preparations

9 10

5 4

16 17

21 22

27 28

34 35 36 37

SQT1166 (ENG)

Preparations

ZS100

ZS60

ZS100

ZS60

ZS100

ZS60

ZS100

1 Shutter button (→22)

Zoom lever (→21)

Motion picture button (→37)

Mode dial (→23)

4 5

Camera [ON/OFF] switch

Camera [ON/OFF] button

Rear dial (→26) Self-timer indicator/AF assist lamp

Flash

Viewfinder (→25, 52)

Diopter adjustment dial

Eye sensor (→25)

Stereo microphone

Strap eyelet

• To prevent dropping, be sure to attach the supplied strap and fit it to your wrist.

Speaker Control ring (→26)

Lens barrel

Lens

[LVF] button (→25)/[Fn4] button

18 19

Flash open lever

[AF/AE LOCK] button

• You can take pictures by locking the focus and/or exposure.

Charging lamp (→18)/

connection lamp

Wi-Fi

] ([Post Focus]) button (→33)/

[ [Fn2] button

Control dial (→26)

SQT1166 (ENG)

[Q.MENU/ [ [Fn3] button

[ [Fn1] button

[ Cursor button (→24)

[MENU/SET] button

[DISP.] button

[HDMI] socket

[CHARGE] socket (→18)

Touch screen (→27)/monitor (→52)

32 33

Speaker Tripod mount

DC coupler cover (→67)

Release lever (→17)

Card/Battery door (→17)

Always use the supplied AC adaptor

●

or a genuine Panasonic AC adaptor

] (Cancel) button/

] (Delete) button (→41)/

• You can easily call some of the menu items and set them during recording.

] (4K photo mode) button (→30)/

] (Playback) button (→41)

• Use this to change display.

• Do not attach this unit to tripods that have screws with a length of 5.5 mm (0.22 inch) or more. Doing so may damage this unit or the unit may not be secured properly on the tripod.

(DMW-AC10PP: optional). (→67) When using an AC adaptor (DMWAC10PP: optional), ensure that the Panasonic DC coupler (DMWDCC11: optional) and AC adaptor (DMW-AC10PP: optional) are used. [Fn5] to [Fn9] (→24) are touch icons.

●

They are displayed by touching the

] tab on the recording screen.

[

Preparations

Inserting and removing the battery or SD memory card (optional)

Make sure that the camera is turned off.

Slide the release lever ( ) to the [OPEN]

position and open the card/battery door Insert the battery and card, making sure

that their orientation is correct

• Battery: Insert the battery all the way firmly and check that it is locked by lever (

• Card: Insert the card all the way firmly until it

clicks. Do not touch the terminals on the back of the card.

Close the door

Slide the release lever to the [LOCK] position.

■

To remove

• To remove battery:

Move lever in direction of arrow.

Lever

• To remove card: Push the card until it clicks, then pull the card out.

Always use genuine Panasonic batteries (DMW-BLG10PP).

●

If you use other batteries, we cannot guarantee the quality of this product.

●

Keep the Memory Card out of reach of children to prevent swallowing.

●

We recommend using a Panasonic card.

●

Press

Pull out

SQT1166 (ENG)

Preparations

Charging the battery

• The battery that can be used with this unit is DMW-BLG10PP.

• The battery is not charged when the camera is shipped. Charge the battery

before use.

• We recommend charging in a location where the ambient temperature is

between 10 °C and 30 °C (50 °F to 86 °F).

Make sure that the camera is turned off.

Insert the battery to this unit, and then connect this unit to the

AC adaptor (supplied) ( ) or a PC ( )

Charging lamp

To the electrical outlet

USB connection cable (supplied)

[CHARGE] socket

• This terminal is located at the bottom when the camera is in an upright position.

• Always check the direction of the pins and hold the plug straight to insert or remove it. (If the cable is inserted in the wrong direction, the pins could become deformed and cause faulty operation.) Also, do not insert into the wrong socket. Doing so may cause damage to this unit.

Computer Getting ready: Turn on the computer.

SQT1166 (ENG)

Preparations

■

Charging lamp

On: Charging in progress Off: Charging stops (After charging stops, disconnect the camera from the

electrical outlet or your computer.)

Flashing: Charging error (→59)

■

Charging time (When using the AC adaptor (supplied))

Approx. 190 min.

The battery is a rechargeable lithium ion battery. If the temperature is too high or too low, the

●

operating time of the battery will become shorter. The battery becomes warm after using and during and after charging. The camera also

●

becomes warm during use. This is not a malfunction.

Do not leave any metal items (such as clips) near the contact areas of the power plug or

●

near the batteries.

Store the battery in a cool and dry place with a relatively stable temperature. (Recommended

●

temperature: 15 °C to 25 °C (59 °F to 77 °F), Recommended humidity: 40%RH to 60%RH) Do not store the battery for a long time while fully charged. When storing the battery for

●

a long period of time, we recommend charging it once a year. Remove the battery from the camera and store it again after it has completely discharged. Do not use any other USB connection cables except the supplied one.

●

Do not use the AC adaptor (supplied) or the USB connection cable (supplied) with other

●

devices.

SQT1166 (ENG)

Preparations

Setting the clock

The clock is not set when the camera is shipped.

Turn the camera on

Press [MENU/SET]

Press to select the language and press [MENU/SET]

• The [Please set the clock] message appears.

Press [MENU/SET]

Press to select the items (year, month,

day, hour, minute), and press to set Press [MENU/SET]

When [The clock setting has been completed.]

is displayed, press [MENU/SET] When [Please set the home area] is displayed, press

[MENU/SET] Press to set your home area and press

[MENU/SET]

You can change the clock setting with [Clock Set] in [Setup] menu.

●

SQT1166 (ENG)

Basic operations

ZS100

ZS60

ZS100

ZS60

Zoom lever (Use zoom)

Basics Basics

Capture a wider area

(wide-angle)

■

Zoom types and use

Optical Zoom:

You can zoom in without degrading the picture quality.

Maximum magnification:

Extended optical zoom:

This function works when picture sizes with [ [Picture Size]. Extended optical zoom allows you to zoom in using a higher zoom ratio than optical zoom, without degrading the picture quality.

Maximum magnification:

 Including the optical zoom ratio. The maximum zoom ratio varies depending on the

picture size.

[i.Zoom]:

You can use the camera’s intelligent resolution technology to increase the zoom ratio up to 2x higher than the original zoom ratio with limited deterioration of picture quality.

[Digital Zoom]:

Zoom 4x further than Optical/Extended optical zoom. When [Digital Zoom] is used simultaneously with [i.Zoom], you can only increase the zoom ratio up to 2x. Note that, with Digital Zoom, enlarging will decrease picture quality.

10x 30x

20x

61.2x

Enlarge the subject (telephoto)

] have been selected in



SQT1166 (ENG)

Basics

ZS100

ZS60

Shutter button (Taking pictures)

• Press the [ ] button ( ) to set the drive mode to [ ] ([Single]).

Press the shutter button halfway (press lightly) to

focus on the subject

• The aperture value and shutter speed are displayed. (If the aperture value and shutter speed are shown in red and flashing, you do not have the appropriate exposure, unless you are using the flash.)

Focus display

( When focus is aligned: illuminated

When focus is not aligned: flashing)

Shutter speed

720

Aperture value



800

Press the shutter button fully (push the button all

the way), and take the picture

Pictures can be taken only when the image is correctly focused as long as

●

the [Focus/Release Priority] is set to [FOCUS].

Even during menu operation or picture playback, if you press the shutter button

●

halfway, you can instantly set the camera ready for recording.

■

Estimated number of recordable pictures



(When [Aspect Ratio] is set to [3:2], [Quality] is set to [ ], [Picture Size] is set to [L] (20M),

and using a card of 8 GB)



(When [Aspect Ratio] is set to [4:3], [Quality] is set to [ ], [Picture Size] is set to [L] (18M),

and using a card of 8 GB)

SQT1166 (ENG)

Mode dial (Select the recording mode)

Set to the desired recording mode

• Rotate the mode dial slowly to select the desired mode.

Intelligent Auto Mode (→29)

Take pictures with automatic settings.

Intelligent Auto Plus Mode (→29)

Allow you to adjust the brightness (exposure) and color hue as desired.

Program AE Mode

Take pictures with automatic shutter speed and aperture value settings.

Aperture-Priority AE Mode

Determine aperture, then take pictures.

Shutter-Priority AE Mode

Determine shutter speed, then take pictures.

Manual Exposure Mode

Determine aperture and shutter speed, then take pictures.

Creative Video Mode

Determine aperture and shutter speed, then record motion pictures.

• You cannot take still pictures.

Custom Mode

Take pictures using pre-registered settings.

Panorama Shot Mode

Take panorama pictures.

Scene Guide Mode

Take pictures that match the scene being recorded.

Creative Control Mode

Take pictures by selecting your preferred picture effect.

Basics

SQT1166 (ENG)

+ 53 hidden pages