Panasonic DMC-FP1 Lumix Basic Operating Instructions Manual

VQT2K33-1
Basic Operating Instructions
Digital Camera
Model No. DMC-FP1
Before use, please read these instructions
completely.
Please also refer to Operating Instructions (PDF format) recorded on the CD-ROM containing the Operating Instructions (supplied).
You can learn about advanced operation methods and check the Troubleshooting.
GN
2 VQT2K33 (ENG)
Dear Customer,
We would like to take this opportunity to thank you for purchasing this Panasonic Digital Camera. Please read these Operating Instructions carefully and keep them handy for future reference. Please note that the actual controls and components, menu items, etc. of your Digital Camera may look somewhat different from those shown in the illustrations in these Operating Instructions.
Carefully observe copyright laws.
• Recording of pre-recorded tapes or discs or other published or broadcast material for purposes other than your own private use may infringe copyright laws. Even for the purpose of private use, recording of certain material may be restricted.
Information for Your Safety
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE,
• DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE,
DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.
• USE ONLY THE RECOMMENDED ACCESSORIES.
• DO NOT REMOVE THE COVER (OR BACK); THERE ARE NO
USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
IF THE POWER CORD OF THIS EQUIPMENT IS DAMAGED, IT MUST BE REPLACED WITH AN ELECTRICALLY APPROVED POWER CORD.
THE SOCKET OUTLET SHALL BE INSTALLED NEAR THE EQUIPMENT AND SHALL BE EASILY ACCESSIBLE.
Product Identification Marking is located on the bottom of units.
(ENG) VQT2K33 3
About the battery pack
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.
• Do not heat or expose to flame.
• Do not leave the battery(ies) in an automobile exposed to direct sunlight for a long period of time with doors and windows closed.
Warning
Risk of fire, explosion and burns. Do not disassemble, heat above 60 °C or incinerate.
4 VQT2K33 (ENG)
About the battery charger
CAUTION!
• DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT-IN
CABINET OR IN ANOTHER CONFINED SPACE. ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS.
• DO NOT OBSTRUCT THE UNIT’S VENTILATION OPENINGS WITH
NEWSPAPERS, TABLECLOTHS, CURTAINS, AND SIMILAR ITEMS.
• DO NOT PLACE SOURCES OF NAKED FLAMES, SUCH AS LIGHTED
CANDLES, ON THE UNIT.
• DISPOSE OF BATTERIES IN AN ENVIRONMENTALLY FRIENDLY MANNER.
• The battery charger is in the standby condition when the AC power supply cord is connected. The primary circuit is always “live” as long as the power cord is connected to an electrical outlet.
Cautions for Use
• When using an AC adaptor, use the AC cable supplied with the AC adaptor.
• Do not use any other AV cables except the supplied one.
• Do not use any other USB connection cables except the supplied one.
In the event of abnormal operation (e.g. if the unit emits smoke or an unusual smell), immediately stop operating the unit and consult the Panasonic Customer Care Centre on 132600.
Keep the camera as far away as possible from electromagnetic equipment (such as microwave ovens, TVs, video games etc.).
• If you use the camera on top of or near a TV, the pictures and sound on the camera may be disrupted by electromagnetic wave radiation.
• Do not use the camera near cell phones because doing so may result in noise adversely affecting the pictures and sound.
• Recorded data may be damaged, or pictures may be distorted, by strong magnetic fields created by speakers or large motors.
• Electromagnetic wave radiation generated by microprocessors may adversely affect the camera, disturbing the pictures and sound.
• If the camera is adversely affected by electromagnetic equipment and stops functioning properly, turn the camera off and remove the battery or disconnect AC adaptor (DMW-AC5G; optional). Then reinsert the battery or reconnect AC adaptor and turn the camera on.
Do not use the camera near radio transmitters or high-voltage lines.
• If you record near radio transmitters or high-voltage lines, the recorded pictures and sound may be adversely affected.
(ENG) VQT2K33 5
-If you see this symbol-
Information on Disposal in other Countries outside the European Union
This symbol is only valid in the European Union. If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal.
6 VQT2K33 (ENG)
Contents
Before use
Standard accessories ................7
Names of parts............................8
Cursor button ...................................9
Preparations
Charging the battery ................10
Inserting and removing the card
(optional)/the battery
.................12
Picture save destination
(cards and built-in memory) ...........13
Setting the Clock ......................14
Setting the menu ......................15
Basics
Taking pictures with
automatic settings
[INTELLIGENT AUTO] Mode ....16
Selecting the [REC] mode .......18
Taking motion pictures
[MOTION PICTURE] Mode ........19
Viewing your pictures
[NORMAL PLAY] .......................20
Deleting pictures ......................20
Others
Reading the Operating
Instructions (PDF format) ........21
Specifications ...........................23
Information for Your Safety .......2
(ENG) VQT2K33 7
Standard accessories
Check that all the accessories are included before using the camera. Part numbers are as of January 2010.
Battery Pack
DMW-BCH7E
• Charge the battery before use.
AC Cable
K2CJ29A00002
Battery Pack is indicated as battery pack or battery in the text.
Hand Strap
VFC4297
Battery Charger
DE-A76A
USB Connection Cable
K1HA08AD0002
Battery Charger is indicated as battery charger or charger in the text.
AV Cable
K1HA08CD0028
Battery Case
VGQ0J54
CD-ROM
VFF0591
Software: Use it to install the software on your PC.
• Operating Instructions
• Cards are optional. You can record or play back pictures on the built-in memory when you are not using a card.
• Consult the dealer or your nearest servicentre if you lose the supplied accessories. (You can purchase the accessories separately.)
• Please dispose of all packaging appropriately.
8 VQT2K33 (ENG)
Names of parts
Release lever
Tripod receptacle
• Ensure that the tripod is stable.
Card/Battery door
Zoom lever
Shutter button
Flash
Lens
Self-timer indicator/ AF Assist Lamp
Lens cover
• Fully peel off the strip of tape from the
lens cover before using the camera.
• When opening and closing the lens
cover, make sure that liquid or foreign objects such as sand do not enter.
LCD monitor
[MODE] button
Cursor button
[DISPLAY] button
[Q.MENU]/Delete button
Microphone
Power button
Playback button
Speaker
button
We recommend you use a battery with sufficient battery power or the AC adaptor when recording motion pictures.
(ENG) VQT2K33 9
Hand strap eyelet
Cursor button
[AV OUT/DIGITAL] socket
[DC IN] socket
The illustrations and screens in this manual may differ from the actual product.
We recommend using the supplied hand strap to avoid dropping the camera.
[MENU/SET]
(menu display/set/finish)
Left cursor button ()
• Self-timer
Down cursor button ()
• Macro mode
Up cursor button ()
• Exposure compensation
Right cursor button ()
• Flash
In this manual, the button that is used is shaded or indicated by▲▼◄►.
Always use a genuine Panasonic AC adaptor (DMW-AC5G: optional).
If while recording motion pictures using the AC adaptor the power supply is cut off due to a power cut or if the AC adaptor is disconnected etc., the motion picture being recorded will not be recorded.
Loading...
+ 19 hidden pages