Panasonic CT-27D11D, CT-27D31C, CT-2772SC, CT-32D11C, CT-32D31C User Manual

...

Color Television Operating Instructions

CT-27D11D CT-27D31C CT-2772SC

CT-32D11C CT-32D31C CT-3274SC

CT-36D11C CT-36D31C

TQB2AA0398-1 10112 PRINTED IN MEXICO

WARNING

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WA RNIN G: To reduce the risk of electric shock do not remove cover or back.

No user-serviceable parts inside. Refer servicing to qualified service personnel.

The lightning flash with arrow head within a triangle is intended to tell the user that parts inside the product are a risk of electric shock to persons.

WARNING: To prevent fire or shock hazard, do not expose this appliance

to rain or moisture.

The exclamation point within a triangle is intended to tell the user that important operating and servicing instructions are in the papers with the appliance.

ABLE OF CONTENTS

Ta ble of Contents

Feature Comparison Chart ......................................3

Congratulations........................................................4

Customer Record ........................................................ ....... ...... 4

Care and Cleaning ...................................................................4

Specifications ...........................................................................4

Installation.................................................................5

Television Location...................................................................5

Optional Cable Connections.....................................................6

AC Power Supply Cord ............................................................6

Cable / Antenna Connection ....................................................6

Optional Equipment Connections...........................7

VCR Connection.......................................................................7

Digital TV - Set Top (DTV-STB) or DVD Player connection.....8

Amplifier Connection (To Audio Amp)......................................8

1 Tuner Picture In Picture (PIP) Operation Only....9

PIP Operation with a VCR and Cable Box ...............................9

PIP Operation with a VCR - No Cable Box ............................10

2 Tuner Picture In Picture (PIP) Operation Only..11

PIP Operation with a VCR and Cable Box .............................11

PIP Operation with a VCR - No Cable Box ............................12

Main Menu...............................................................13

Remote Control Buttons.........................................................13

Remote Control Guide............................................................13

Main Menu Feature Chart.......................................14

Special Features.....................................................17

Menu Languages....................................................................17

Program Channels .................................................................17

CC (Closed Captioning) .........................................................17

Other Adjustments - Auto Power ON/Channel Banner ..........17

Sleep Timer........................................ ...... ..............................18

Timer 1 and Timer 2...............................................................18

Picture -Video Adjustments....................................................19

Picture - Other Adjustments...................................................19

Channels - Favorites ..............................................................20

Channels - Caption.................................................................20

Skip Feature....................................... ...... ....... ...... ...... ....... ....2 0

Lock - Mode............................................................................21

Troubleshooting Chart...........................................22

Read these instructions completely before operating TV. Contents are subject to change without notice or obligation.

MODELS

Feature Comparison Chart

EATURE COMPARISON CHART

FEATURES

MENU LANGUAGE

ENG/SPAN/FR

NO PIP 1 TUNER PIP 2 TUNER PIP

VIDEO INPUT

PICTURE MEMORY

CLOSED CAPTIONING

V-CHIP CAPABILITY

75 OHM INPUT

CHANNEL INFO

BANNER

VIDEO NORM

AUDIO NORM

STEREO

AI SOUND

BASS/BALANCE/TREBLE

CT-32D11C

CT-27D11D

r r r r r r r r

r r r

r r r r

r r r r r r r r

CT-2772SC

CT-27D31C

CT-32D31C

CT-3274SC

CT-36D11C

CT-36D31C

SURROUND

NUMBER OF SPEAKERS 2 2 2 2 2 2 2 2

A/V IN

(REAR/FRONT)

AUDIO OUT

S-VHS INPUT

A/V JACKS AUDIO SPECIAL FEATURES

COMPONENT INPUT

HEADPHONE JACK

r r r r r r r r

(2/1)3 (2/1)3 (2/1)3 (2/1)3(2/1)3 (2/1)3 (2/1)3 (2/1)

r r r r r r r r

ONGRATULATIONS

Congratulations

Your new TV features a solid state chassis that is designed to give you many years of enjoyment. It was thoroughly tested and tuned at the factory for best performance.

Customer Record

The model and serial numb er of this product are locate d on the back of the TV. You should note the model and serial number in the space provided and retain as a permanent record of your purchase. This will aid in identification in the event of theft or loss.

Care and Cleaning

Screen (Turn TV Off)

r Use a mild soap solution or window cleaner with a soft clean cloth. DO NOT USE

r Avoid excessive moisture and wipe dry.

Note: Do not spray any type of cleaning fluid directly on the screen.

Cabinet and Remote Control

r For cabinets and remote control, use a soft cloth dampened with water or a mild detergent

r Do not use benzene, thinner or other petroleum based products.

Model Number

Serial Number

ABRASIVE CLEANERS.

solution. Avoid excessive moisture and wipe dry.

Specifications

Power Source

CT-27D11D (2.0A) CT-27D31C (2.1A) CT-2772SC (2.1A) CT-32D11C (2.2A) CT-32D31C (2.2A) CT-3274SC (2.2A) CT-36D11C (2.4A) CT-36D31C (2.4A)

Channel Capability - 181 VHF-12; UHF-56; Cable-125

Video Input Jacks 1Vp-p, 75 Ohm, Phono Jack Type

Audio Input Jacks 500mV RMS 47K Ohm

Audio Output Jacks 0-2.0V RMS 4.7K Ohm

Component Input (Y / PB / PR)

S-Video Input Jacks S-Video (Y -C) Connector

Specifications are subject to change without notice or obligation.

120V AC, 60Hz

75 Ohm, Phono Jack Type

Installation

Television Location

This unit is intended to be used with an optional stand or entertainment centre-. Consult your dealer for available options.

r Avoid excessive sunlight or bright lights, including reflections. r Keep away from excessive heat or moisture. Inadequate ventilation may cause internal

r Fluorescent lighting may reduce remote control transmitting range. r Keep away from magnetic equipment, including motors, fans and external sp eakers.

CAUTION: Use this television receiver only with the cart, stand, tripod,

bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoi d injury from tip-over. In order to avoid injury to children, never place your television receiver on a piece of furniture that is capable of being tilted by a child leaning on it, pulling on it, standing on it, or climbing on it.

CT-27D11D, CT-27D31C, CT-2772SC:

CAUTION:

with other carts (or stands) is capable of resulting in instability causing possible injury.

CT-32D11C, CT-32D31C, CT-3274SC:

CAUTION:

with other carts (or stands) is capable of resulting in instability causing possible injury.

component failure.

This television receiver for use only with PANASONIC TY-27GPN stand. Use

This television receiver for use only with PANASONIC TY-32GPN stand. Use

NSTALLATION

CT-36D11C, CT-36D31C:

CAUTION:

with other carts (or stands) is capable of resulting in instability causing possible injury.

This television receiver for use only with PANASONIC TY-36G22 stand. Use

NSTALLATION

Optional Cable Connections

Shielded audio and video cables should be used between components. For best results:

r Use 75-ohm coaxial shielded cables. r Use appropriate input and output connectors, that match your component connectors. r Avoid long cables to minimize interference.

AC Power Supply Cord

CAUTION: TO PREVENT ELECTRIC SHOCK MATCH WIDE

BLADE OF PLUG TO WIDE SLOT OF AC OUTLET AND FULLY INSERT. DO NOT USE A PLUG WITH A RECEPT AC LE OR OTHER OUTLET UNLESS THE BLADE CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.

PROTECT POWER CORDS FROM BEING WALKED ON, ROLLED OVER, CRIMPED, BENT OR PINCHED, PARTICULARLY AT PLUGS, CONVENIENCE RECEPTACLES, AND THE POINT WHERE THEY EXIT FROM THE APPARATUS.

Cable / Antenna Connection

For proper reception, either a cable or antenna connection is required.

Cable Connection

Connect the cable supplied by your local cable company.

Note: A cable converter box may be required for proper reception.

Check with your local cable company for compatibility requirements.

Antenna Connections

r For proper reception of VHF/UHF channels, an external antenna is required. For best

reception an outdoor antenna is recommended.

r Antenna Mode must be set to TV.

Polarized plug

Incoming Cabl e from

Cable Company

75 Ohm VHF/UHF

on back of TV

ncoming Cable from

Home Antenna

Cable Preset

Cable Mode is preset at the factory. Antenna users must change to Antenna Mode in the Setup Menu.

Optional Equipment Connections

VCR Connection

VCRs, video disc playe rs, video game equipment, an d DSS equipment can also be connected to the video inputs. See the optional equipment manual for more information.

CONNECTION ON BACK OF TV

PTIONAL EQUIPMENT CONNECTIONS

VCR

COMPONENT

TO AUD IO

AMP

L R

VIDEO INPUT

INP UT 1

S-VIDEO

CABLES NOT SUPPLIED

Procedure

IMPORTANT INFORMATION REGARDING USE OF VIDEO GAMES, COMPUTERS, DSS OR OTHER FIXED IMAGE DISPLAYS.

The extended use of fixed image program material can cause a permanent “shadow image” on the picture tube. This background image is viewable on normal programs in the form of a stationary fixed image. This type of irreversible picture tube deterioration can be limited by observing the following steps:

A. Reduce the brightness/contrast setting to a minimum viewing level. B. Do not display the fixed image for extended periods of time. C. Turn the power off when not in actual use.

R AUDIO

Y/VIDEO

VIDEO

LINP UT 2

Jack used for 1/8"

headpone plug

VIDEO OUT

AUDIO OUT

ANT IN

ANT OUT

HP J VIDE O 3 L A UDIO IN R

FRONT OF TV

1. Connect equipment as shown to front or rear Audio/Video input jacks.

Note: Front and rear Audi o/Video connectors cannot be o perated at the same time.

2. Select the Video mode by pressing TV/VIDEO button.

3. Operate optional equipment as instructed in equipment manual.

Note: The marking or retained image on the picture tube resulting from fixed image

use is not an operating defect and as such is not covered by Warranty. This product is not designed to display fixed image patterns for extended periods of time.

PTIONAL EQUIPMENT CONNECTIONS

Digital TV - Set-Top Box (DTV-STB) or DVD Player Connection

Use this diagram to connec t the Panasonic DTV-STB (Digital TV-Set-Top Box) to the back of your TV.

TERMINALS ON BACK OF DTV-STB OR DVD PLAYER

CABLES NOT SUPPLIED

COMPONENT

R-AU D IO -L

PBP

R-AUDIO-L VIDEO

NTSC OUTPUT

DIGITAL OUTPUT

TO AUDIO

S-VIDEO

AMP

L R

VIDEO INPUT

INPUT 1

COMPONENT VIDEO INPUT TERMINALS ON BACK OF TV

Notes:

r There are three video inputs, Y, PB, and PR. Separate component colour inputs provide

luminance and color separation. Use the L (left) and R (right) audio inputs.

r Select DTV-STB to 480i output mode. TV set can receive 480i signal only .

S-VIDEO

R AUDIO

Amplifier Connection (To Audio Amp)

Connect to an external audio amplifier input for listening to a stereo system.

Note: TO AUDIO AMP terminals cannot be connected directly to external speakers.

Audio Adjustments

1. Select TV SPEAKERS ON from AUDIO menu.

2. Set amplifier volume to minimum.

3. Adjust TV volume to desired level.

4. Adjust amplifier volume to match the TV.

5. Select TV SPEAKERS OFF&VAO from AUDIO menu.

6. Volume, mute, bass, treble and balance are now controlled from the TV.

Note: In OFF&FAO the volume is controlled by the external amplifier.

CONNECTIONS ON BACK OF TV

External Amplifier

TO AUDIO

AMP

COMPONENT

VIDEO INPUT

R AUDIO

Y/VIDEO

VIDEO

LINPUT 2

CABLES NOT SUPPLIED

INPUT 1

S-VIDEO

R AUDIO

Y/VIDEO

VIDEO

LINPUT 2

1 T

UNER PICTURE IN PICTURE

1 Tuner Picture In Picture (PIP) Operation Only

Note: Refer to the FEATURE COMP ARISON CHART on page 3 for your television PIP capability.

PIP Operation with a VCR and Cable Box

This television includes a Picture In Picture (PIP) feature. A second video source (VCR, Camcorder, etc.) is required to provide a second picture. Connect your television to a VCR and Cable Box, as shown.

(PIP) O

PERATION ONLY

ANT IN

CONNECTION ON BACK OF TV

COMPONENT

TO AUDIO

AMP

L R

VIDEO INPUT

INP U T 1

S-VIDEO

CABLES NOT SUPPLIED

Note: The Remote Control must be programmed with supplied codes to operate the VCR and Cable

Box. See

Procedure Press the PIP button on the Remote Control to display the PIP frame.

Note: The PIP picture is the same as the main picture, initially.

To view a different picture in the PIP frame:

r Press the TV/VIDEO button on the Remote Control to select the video PIP source. r Verify the CABLE BOX and VCR are ON and the VCR is tuned to channel 3. r Choose channels fo r th e

using the numeric keypad or CH up/down buttons.

r Choose channels for the

and using the numeric keypad or CH up/down buttons.

RAUDIO

Y/VIDEO

VIDEO

LINP U T 2

Programming the Remote Control in the

PIP

frame by pressing the CBL button on the Remote Control an d

Main Picture

VCR CABLE BOX

VIDEO OUT

AUDIO OUT

ANT IN

ANT OUT

ANT IN

Cable splitter (not supplied)

Incoming

Cable

Remote Control Quick Reference Guide.

by pressing the TV button on the Remote Control

SWAP and RECALL Buttons

The SWAP button switches the PIP and Main Picture source. Press the RECALL button for on screen PIP and Main Picture source status.

1 T

UNER

PIP O

PERATION WITH A

VCR - NO C

ABLE BOX

1 Tuner PIP Operation with a VCR - No Cable Box

Note: Refer to the FEATURE COMP ARISON CHART on page 3 for your television PIP capability.

This television includes a Picture In Picture (PIP) feature. A second video source (VCR) is required to provide a second picture.

Connect your television to a VCR, as shown:

ANT IN

TO AUDIO

AMP

L R

CONNECTION ON BACK OF TV

COMPONENT VIDEO INPUT

INP UT 1

S-VIDEO

R AUDIO

LINP UT 2

Y/VIDEO

VIDEO

CABLES NOT SUPPLIED

VCR

VIDEO OUT

AUDIO OUT

ANT IN

ANT OUT

Incoming

Cable

Note: The Remote Control must be programmed with the supplied codes to operate the VCR. See

Programming the Remote Control in the Remote Control Quick Reference Guide.

Procedure

Turn the VCR OFF and tune the TV to channel 3. Press the PIP button on the Remote Control to display the PIP frame on screen.

Note: The PIP picture is the same as the Main picture, initially.

r Press the TV/VIDEO button on the Remote Control to select the VIDEO PIP source. r Press the VCR button on the Remote Control and turn ON the VCR. r Press the TV/VCR button on the Remote Control. r Choose channels for

Remote Control.

r Choose channels for the

and using the numeric keypad or CH up/down buttons.

PIP

frame by pressing VCR CHANNEL up/down buttons on the

Main Picture

by pressing the TV button on the Remote Control

SWAP and RECALL Buttons

The SWAP button switches the PIP and Main Picture source. Press the RECALL button for on screen PIP and Main Picture source status.

2 T

UNER PICTURE IN PICTURE

2 Tuner Picture In Picture (PIP) Operation

Note: Refer to the FEATURE COMP ARISON CHART on page 3 for your television PIP capability.

PIP Operation with a VCR and Cable Box

This television includes a two tuner Picture In Picture (PIP) feature. This allows watching two (2) live broadcasts at the same tim e without or with an exte rnal video source (VCR).

Without A VCR (External Video Source) Procedure

7. Connect incoming cable to antenna (ANT) input on back of TV.

8. Press the PIP button on the Remote Control to display the PIP frame.

Note: The audio is for the Main Picture only.

9. Choose channels for the up/down buttons.

10. Choose channels for the

CH up/down buttons or by us ing the numeric keypad.

With A VCR (External Video Source) And Cable Box

Connect your television to a VCR and Cable Box, as shown.

PIP frame

Main Picture

(PIP) O

PERATION

by pressing the Remote Control PIP CHANNEL

by pressing the Remote Control

ANT IN

CONNECTION ON BACK OF TV

COMPONENT

TO AUDIO

AMP

CABLES NOT SUPPLIED

VIDEO INPUT

INP UT 1

S-VIDEO

Note: The Remote Control must be programmed with supplied codes to operate the VCR and Cable

Box. See

Procedure Press the PIP button on the Remote Control to display the PIP frame.

Note: The audio is from the Main Picture only.

To view scrambled channels through your Cable Box in the PIP frame:

1. Press the TV/VIDEO button on the Remote Control to select the same video input to which your cable box is connected.

2. Verify the CABLE BOX and VCR are ON and the VCR tuned to channel 3.

3. Choose chann els for th e and using the numeric keypad or PIP CHANNEL up/down buttons.

4. Choose channels for the Control and using the numeric keypad or CH up/down buttons.

Note: The SWAP button switches the on screen PIP and Main Picture source. Press the RECALL

button for PIP and Main Picture source status.

RAUDIO

Programming the Remote Control in the

Y/VIDEO

VIDEO

LINP UT 2

PIP

frame by pressing the CBL button on the Remote Control

Main Picture

VCR

VIDEO OUT

AUDIO OUT

ANT IN

ANT OUT

Remote Control Quick Reference Guide.

CABLE BOX

ANT OUT

ANT IN

Incoming Cable

by pressing the TV button on the Remote

2 T

UNER

PIP O

PERATION WITH A

VCR - NO C

ABLE BOX

2 Tuner PIP Operation with a VCR - No Cable Box

Note: Refer to the FEATURE COMP ARISON CHART on page 3 for your television PIP capability.

This television includes a two tuner Picture In Picture (PIP) feature. This allows watching two (2) live broadcasts at the same tim e without or with an exte rnal video source (VCR).

Connect your television to a VCR, as shown.

ANT IN

CONNECTIONS ON BACK OF TV

COMPONENT

TO AUDIO

AMP

CABLES NOT SUPPLIED

VIDEO INPUT

INP UT 1

S-VIDEO

RAUDIO

Y/VIDEO

VIDEO

LINP UT 2

VCR

VIDEO OUT

AUDIO OUT

ANT IN

Incoming Cable

ANT OUT

Note: The Remote Control must be programmed with the supplied codes to operate the VCR. See

Programming the Remote Control in the Remote Control Quick Reference Guide.

Procedure Press the PIP button on the Remote Control to display the PIP frame on screen.

Note: The audio is from the Main Picture only.

To view an external video source in the PIP frame:

1. Press the TV/VIDEO button on the Remote Control to select the same video input to which your VCR is connected.

2. Verify the VCR is on.

3. Choose channels for the

Main Picture

Control and using the numeric keypad or CH up/down button.

4. Choose channels for the

PIP frame

and using the PIP Channel up/down buttons. .

by pressing the TV button on the Remote

by pressing the TV button on the Remote Control

SWAP and RECALL Buttons

The SWAP button switches the PIP and Main Picture source. Press the RECALL button for on screen PIP and Main Picture source status.

Main Menu

EXIT

Procedures

1. Press the ACTION button on the remote control to display Main Menu.

2. Press the CH up/down or VOL right/left button to highlight the desired icon.

3. Press the ACTION button to display icon features and submenus.

4. Press the CH up/down buttons to select desired icon features.

5. Press the VOL right button to highlight submenus.

6. Press the CH up/down to select desired submenu.

7. Press the VOL right/left button to select or adjust submenu.

8. Press the ACTION button repeatedly to exit menus.

AIN MENU

Remote Control Buttons

Remote Control Guide

The Remo te Control Quick Reference Guide is located within the package provided with this TV.

Remote ACTION / Navigation Button

VOL

AIN MENU FEATURE CHART

Main Menu Feature Chart

ENU

ESCRIPTION

SET UP

LANGUAGES

PROG. CHAN

(Program Channels)

(Closed Captioning)

OTHER ADJ.

AUDIO ADJ.

(Adjustments)

OTHER ADJ.

(Adjustments)

SURROUND

r Select English, Spanish, or French menu. r MODE - Sele ct Cable or TV. See Installa-

tion section in manual.

r AUTO PROGRAM - Automatically program

channels having a signal into memory.

r MANUAL PROGRAM - Manually add or

delete channels from memory.

r CC ON MUTE - Activate C1-C2 for Closed

Captioning display when the remote MUTE button is p ressed.

r CC MODE - Select C1 or C2 for Closed

Captioning, program guides and other information.

r AUTO POWER ON - Select SET to power

up the TV at the same time as the Cable Box or other components or select OFF.

r CHAN BANNER - Select ON to display

onscreen banner when changing channels.

Note: Press RECALL to display onscreen

Channel Banner at any time.

AUDIO

r MODE - Select STEREO, SAP (Second

Audio Program) or MONO. (Use MONO when stereo signal is weak.)

r BASS - Increase or decrease the bass

response.

r TREBLE - Increase or decrease the treble

response.

r BALANCE - Emphasize the left/right

speaker volume.

r NORMAL - Reset BASS, TREBLE and

BALANCE to factory default.

r AI SOUND - Automatically adjust volume

to maintain a comfortable listening level. (AI sound is not available in VIDEO mode).

r Enhances audio response when listening

to stereo.

+ 35 hidden pages