Panasonic CT-30WX54U, CT-30WC14UJ, CT-30WX54J, CT-30WC14J, CT-30WC14U User Manual

HDTV Monitor
Operating Instructions

Monitor de Alta Definición
Instrucciones de Operación

Écran à haute définition
Manuel d’utilisation

CT-30WC14
CT-30WX54
CT-34WX54

TQB2AA0496 40407
PRINTED IN USA
IMPRESO EN EE.UU
IMPRIMÉ AUX ÉTATS-UNIS

ENGLISH

The lightning flash with arrow head
within a triangle is intended to tell the

WARNING

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE

COVER OR BACK. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.

The Class II insulation symbol (square within a square) indicates that this product has been evaluated
and tested to comply with Class II insulation requirements.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS

APPARATUS TO RAIN OR MOISTURE. DO NOT PLACE ANY OBJECTS FILLED WITH
LIQUIDS, SUCH AS VASES, ON THIS APPARATUS.

user that parts inside the product
constitute a risk of electric shock to
persons.

The exclamation point within a triangle
is intended to tell the user that
important operating and servicing
instructions are in the papers with the
appliance.

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade
or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an elec­trician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use caution when moving the cart/apparatus combi­nation to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been dam­aged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.

Read these instructions completely before operating television.
Contents are subject to change without notice or obligation.

Copyright 2004 by Matsushita Electric Corporation of America. All rights reserved.
Unauthorized copying and distribution is a violation of law.

Important Information

FCC CAUTION: ANY CHANGES OR MODIFICATIONS TO THIS TV RECEIVER NOT EXPRESSLY

APPROVED BY MATSUSHITA ELECTRIC CORPORATION OF AMERICA COULD CAUSE
HARMFUL INTERFERENCE, WHICH WOULD VOID THE USER’S AUTHORITY TO
OPERATE THIS EQUIPMENT.

IMPORTANT INFORMATION

ENVIRONMENTAL NOTICE:

High Definition Sound

THIS PRODUCT UTILIZES CATHODE RAY TUBES (CRT) AND OTHER
COMPONENTS THAT CONTAIN LEAD. DISPOSAL OF THESE MATERIALS
MAY BE REGULATED IN YOUR COMMUNITY DUE TO ENVIRONMENTAL
CONSIDERATIONS. FOR DISPOSAL OR RECYCLING INFORMATION
PLEASE CONTACT YOUR LOCAL AUTHORITIES, OR THE ELECTRONICS
INDUSTRIES ALLIANCE: <HTTP://WWW.EIAE.ORG.>

The Energy Star label, a symbol for energy efficiency, was created by the U.S.
Environmental Protection Agency (EPA) and the U.S. Department of Energy
(DOE) to help customers identify products that can save them money and protect
the environment by saving energy. Energy Star compliant products generally
consume less energy than similar standard products.

Manufactured under license from BBE Sound, Inc.
Licensed by BBE Sound, Inc. under USP4638258, 5510752 and

5736897. BBE and BBE symbol are registered trademarks of BBE
Sound, Inc.

BBE High Definition Sound restores clarity and presence for better speech
intelligibility and music realism.

HDMI, the HDMI logo and High Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC.

ENGLISH

Important Information Regarding the Use of Video Games, Computers, or Other Fixed
Image Displays

WARNING: The marking or retained image on the picture tube resulting from viewing fixed image is
not an operating defect and as such is not covered by Warranty.

The television is designed to display constantly moving images on the screen. Continuous viewing of
stationary images such as letterbox pictures on standard screen TVs (with top/bottom bars), non­expanded standard (4:3) pictures on wide screen TVs (with side bars shown on each side of an image),
stock market report bars (ticker running at the bottom of the screen), video game patterns, fixed
scoreboards, bright station logos, on-line (Internet) or repetitive computer style patterns should be limited.

The extended use of fixed image program material can cause permanent picture tube damage, shown as
a “shadow image” viewable on normal programs. This type of irreversible picture tube deterioration can be
limited by performing the following steps:

• Limit the display of fixed image program material to no more than 15% of total viewing time per week.

• Turn the power off when not in use.

1 z

IMPORTANT INFORMATION

FCC INFORMATION

This equipment has been tested and found to comply with
the limits for a Class B Digital Device in accordance with
the specifications in Part 15 of the FCC Rules. The limits
are designed to provide reasonable protection against
radio and television interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation.

If this equipment does cause interference to radio or
television reception (which you can determine by turning
the equipment off and on), try to correct the interference by

ENGLISH

one or more of the following measures.

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the
receiver.

• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV
technician for help.

2 z

Table of Contents

TABLE OF CONTENTS

Important Information ..................................... 1

Information Regarding The Use Of Video Games

Computers, Or Other Fixed Image Displays............ 1

FCC Information ......................................................... 2

Customer Record........................................................ 4

Care and Cleaning...................................................... 4

Specifications.............................................................. 4

Feature Chart.............................................................. 4

Installation........................................................ 5

Television Location ..................................................... 5

Optional Cable Connections ....................................... 5

AC Power Supply Cord............................................... 5

Cable / Antenna Connection....................................... 5

Remote Control Battery Installation ............................ 5

Initial Set Up Menu........................................... 6

Optional Equipment Connections.................. 7

VCR ........................................................................... 7

Cable Box .................................................................. 7

VCR and Cable Box................................................... 7

Front Control Panel..................................................... 8

Amplifier (TO AUDIO AMP) ........................................ 8

Digital TV - Set-Top Box (DTV-STB) or DVD Players 8

Program Out connection............................................. 9

HDMI (High Definition Multimedia Interface) input

connection ............................................................... 9

Special Features .............................................10

ASPECT Button .......................................................... 10

BBE Button ................................................................. 10

SAP Button................................................................. 10

Split Operation............................................................ 10

Split Operation with Cable Box................................... 10

Split Operational Buttons............................................ 11

Split CTRL Button ................................................... 11

TV/Video Button...................................................... 11

Search Button......................................................... 11

Freeze Button ......................................................... 11

Main Picture Freeze Feature .................................. 11

Direct Video Input Selection....................................... 11

Remote Control Operation ............................12

Operating Components with Remote Control............. 13

Programming the Remote Control.............................. 15

Programming Without a Code.................................... 15

Component Codes ..................................................... 15

Basic Menu Navigation................................. 18

Icon Menus Operation .................................. 19

Picture ........................................................................ 19

Audio .......................................................................... 19

Channels .................................................................... 20

Timer .......................................................................... 21

Lock............................................................................ 21

V-Chip Set............................................................... 21

Set Up ........................................................................ 24

Troubleshooting Chart ................................. 26

Index............................................................... 27

ENGLISH

Note: The warranty and service center information is located in the back of this manual.

3 z

CONGRATULATIONS

Congratulations

Your new Panasonic Tau Television features state-of-the­art technology for high quality picture and sound with
complete audio/video connections for your home theater
system. Your TV is designed to give you many years of
enjoyment. It was thoroughly tested and tuned at the
factory for best performance.

Customer Record

The model and serial number of this product are located on
the back of the TV. You should note the model and serial
number in the space provided and retain as a permanent
record of your purchase. This will aid in identification in the
event of theft or loss. Product registration for U.S. customers
is available at: www.prodreg.com/panasonic.

ENGLISH

Model
Number

Serial
Number

Care and Cleaning

Screen (Turn TV Off)

• Use a mild soap solution or window cleaner and a clean
cloth.

• DO NOT USE ABRASIVE CLEANERS.

• Avoid excessive moisture and wipe dry.

Warning: Do not spray any type of cleaning fluid directly on the

screen.

Cabinet and Remote Control

• For cabinets and remote control, use a soft cloth
dampened with water or a mild detergent solution. Avoid
excessive moisture and wipe dry.

• Do not use benzene, thinner or other petroleum based
products.

Specifications

Specifications are subject to change without notice or
obligation.

Power Source

CT-30WC14 (3.6A)

CT-30WX54 (3.6A)

CT-34WX54 (3.6A)

Channel Capability - 181 VHF-12; UHF-56; Cable-113

Video Input Jacks 1Vp-p, 75 Ohm, Phono Jack Type
Audio Input Jacks 500mV RMS 47K Ohm

Video out jack 1Vp-p, 75 Ohm, Phono Jack Type

Audio Output Jacks 0-2.0V RMS 4.7K Ohm

HDMI/HDCP Input jack Type A

Component Input (Y / PB / PR)

S-Video Input Jacks S-Video (Y-C) Connector

120V AC, 60Hz

75 Ohm, Phono Jack Type

Feature Chart

MODELS

FEATURES

MENU LANGUAGE

ENG/SPAN/FR

2 TUNER SPLIT SCREEN

CLOSED CAPTIONING

V-CHIP CAPABILITY

DIGITAL SCAN RATE

NTSC LINE-DOUBLER

VIDEO NORM

AUDIO NORM

AI SOUND

BASS/BALANCE/TREBLE

SURROUND

A/V IN (REAR/FRONT)

AUDIO OUT

HDMI/HDCP INPUT

S-VHS INPUT

COMPONENT INPUT

STEREO

BBE

FAO/VA O

CT-30WX54

CT-30WC14

CT-34WX54

• • •

• • •

• • •

• • •

1080i,

1080i,
480p

1080i,
480p

480p
480p 480p 480p

• • •

• • •

• • •

• • •

• • •

• • •

• • •

FAO

3

(2/1)4 (3/1)4 (3/1)

• •

• • •

• • •

• • •

1 2 2

4 z

Installation

INSTALLATION

Television Location

This unit can be used as part of an entertainment center. Consult

your dealer for available options.

• Avoid excessive sunlight or bright lights, including
reflections.

• Keep away from excessive heat or moisture. Inadequate
ventilation may cause internal component failure.

• Fluorescent lighting may reduce remote control
transmitting range.

• Keep away from magnetic equipment, including motors,
fans and external speakers.

WARNING: Use this television receiver only with the
cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart
is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over. In order to
avoid injury to children, never place your television receiver on a
piece of furniture that is capable of being tilted by a child leaning
on it, pulling on it, standing on it, or climbing on it. A falling
television can cause serious injury or even death.

CT-30WC14, CT-30WC14U:

CAUTION: These television receivers for use only with
PANASONIC TY-30WX54T stand. Use with other carts
(or stands) is capable of resulting in instability causing
possible injury.

CT-30WX54, CT-30WX54U:

CAUTION: This television receiver for use only with
PANASONIC TY-30WX54T stand. Use with other carts
(or stands) is capable of resulting in instability causing
possible injury.

CT-34WX54, CT-34WX54U:

CAUTION: This television receiver for use only with
PANASONIC TY-34WX54T stand. Use with other carts
(or stands) is capable of resulting in instability causing
possible injury.

Optional Cable Connections

Shielded audio and video cables should be used between
components. For best results:

• Use 75-ohm coaxial shielded cables.

• Use appropriate input and output connectors, that match
your component connectors.

• Avoid long cables to minimize interference.

AC Power Supply Cord

CAUTION: TO PREVENT ELECTRIC SHOCK,

MATCH WIDE BLADE OF PLUG TO WIDE SLOT
OF AC OUTLET AND FULLY INSERT. DO NOT
USE A PLUG WITH A RECEPTACLE OR OTHER
OUTLET UNLESS THE BLADE CAN BE FULLY INSERTED TO
PREVENT BLADE EXPOSURE.

PROTECT POWER CORDS FROM BEING WALKED ON, ROLLED
OVER, CRIMPED, BENT, OR PINCHED, PARTICULARLY AT PLUGS,
CONVENIENCE RECEPTACLES, AND THE POINT WHERE THEY EXIT
FROM THE APPARATUS.

Polarized plug

Cable / Antenna Connection

For proper reception, either a cable or antenna connection
is required.

Cable Connection

Connect the cable supplied by your local
cable company. Tighten with fingers only.
Use of any tool (e.g. pliers) for tightening
may result in tuner damage.

Note: A cable converter box may be

required for proper reception.
Check with your local cable
company for compatibility requirements.

Incoming Cable from

Cable Company

75 Ohm VHF/UHF

on back of TV

Antenna Connection

For proper reception of VHF/UHF channels, an external antenna
is required. For best reception an outdoor antenna is
recommended.

• Connect home antenna to ANT
connection on back of television.

Note: Cable Mode is preset at the

factory.

Incoming Cable from

Home Antenna

Remote Control Battery Installation

Requires two AA batteries (supplied).

Battery Polarity

AA / 1.5A

AA / 1.5A

1

3

Procedure

1. Turn the remote control face down. Remove battery
cover by pressing down on the marking on the cover
and sliding it off in the direction indicated.

2. Install batteries matching (+) and (-) polarity signs.

3. Replace the battery cover by sliding in reverse until the
lock snaps.

Note: Incorrect installation can cause battery leakage and

corrosion that will damage the Remote Control.

Precautions

• Replace batteries in pairs.

• Do not mix battery types (zinc carbon with alkaline).

• Do not recharge, heat, short-circuit, disassemble, or

burn batteries.

2

AA / 1.5A

AA / 1.5A

ENGLISH

5 z

INITIAL SET UP MENU

Initial Set Up Menu

For your convenience, Auto Set up menu will be displayed
on screen when the set is turned on for the first time. If
needed, follow the menus and procedures for setting up the
features.

IDIOMA/LANGUE

To change menu language to ENGLISH, SPANISH or
FRENCH.

Procedure

•Press VOL  to select English, Spanish or French.

FIRST PLEASE

CONNECT THE ANTENNA

IDIOMA/LANGUE

MODE
AUTO PROGRAM

ENGLISH

GEOMAGNETIC CORRECTION
TILT CORRECTION

MODE

To select TV (antenna) or CABLE mode depending on the
signal source.

Procedure

•Press VOL  to select TV or CABLE.

IDIOMA/LANGUE

MODE

AUTO PROGRAM
GEOMAGNETIC CORRECTION
TILT CORRECTION

AUTO PROGRAM

To automatically program all channels with a signal.

Procedure

•Press VOL  to start Auto Programming.

IDIOMA/LANGUE
MODE

AUTO PROGRAM

GEOMAGNETIC CORRECTION
TILT CORRECTION

INITIAL SET UP

PRESS ACTION TO EXIT

FIRST PLEASE

CONNECT THE ANTENNA

INITIAL SET UP

PRESS ACTION TO EXIT

FIRST PLEASE

CONNECT THE ANTENNA

INITIAL SET UP

PRESS ACTION TO EXIT

ENGLISH 

ENGLISH 

ENGLISH 

CABLE 



CABLE 



CABLE 












GEOMAGNETIC CORRECTION

This feature is used to adjust discoloration of the picture
due to the earth’s magnetic field in the area.

Procedure

•Press VOL  to display adjustment menu.

•Press  VOL or VOL  to adjust discoloration in

picture.

FIRST PLEASE

CONNECT THE ANTENNA

IDIOMA/LANGUE
MODE
AUTO PROGRAM

GEOMAGNETIC CORRECTION

TILT CORRECTION

INITIAL SET UP

PRESS ACTION TO EXIT

ENGLISH 

CABLE 






GEOMAGNETIC CORRECTION

- - - - - - - - - - - - - - - - - -

0

l

J

TO ADJUST

PRESS ACTION TO EXIT

K

TILT CORRECTION

This feature is used to adjust the tilt of the picture due to
earth’s magnetic field in the area.

FIRST PLEASE

CONNECT THE ANTENNA

IDIOMA/LANGUE
MODE
AUTO PROGRAM
GEOMAGNETIC CORRECTION

TILT CORRECTION

INITIAL SET UP

PRESS ACTION TO EXIT

ENGLISH 

CABLE 






TILT CORRECTION

0

J

TO ADJUST
PRESS ACTION
TO EXIT

K

Procedure

•Press VOL  to display adjustment menu.

•Press  VOL or VOL  to adjust picture tilt.

6 z

Optional Equipment Connections

Note: The remote control must be programmed with supplied

codes to operate the optional equipment.

VCR Connection

Follow this diagram when connecting your television to a
VCR only.

VCR

PLAY

R

FF

E
W

STOP

VIDEO OUT

L
AUDIO OUT
R

ANT IN ANT OUT

Incoming
Cable

ANT

HDMI

AV IN

Note: Rear A/V jacks diagram may vary, depending on model.

Please refer to the FEATURE CHART on page 4 for your
model’s capabilities.

Viewing a television program
Procedure

• Tune the television to the program you want to view.

Viewing a video
Procedure

 Option A

• Press the TV/VIDEO button on the remote control to
select the video input (VIDEO 1, VIDEO 2, etc.)
connected to your VCR.

• Begin the video.

 Option B

• Tune the television to Channel 3 or 4, depending on your
VCR.

• Begin the video.

Recording a television program

Procedure

 Option A (Recording and viewing the same program)

• Tune the television to Channel 3 or 4, depending on your
VCR.

• Using the VCR, tune to the television program you want
to record.

• Begin recording.

 Option B (Recording one program while viewing another

program)

• Press the TV/VIDEO button on the remote control to
select the video input (VIDEO 1, VIDEO 2, etc.)
connected to your VCR.

• Using the VCR, tune to the television program you want
to record.

• Begin recording.

• Press the TV/VIDEO button on the remote control to
switch back to TV mode.

• Tune the television to the program you want to view.

TERMINALS ON BACK OF TELEVISION

VIDEO

AUDIO
IN

L

R

Y

P

B

P

R

12
COMPONENT
VIDEO INPUT



INPUT

1

CABLES NOT INCLUDED



S-VIDEO

INPUT INPUT

2 3

VIDEO

PROG
OUT

L

R

TO AUDIO
AMP

OPTIONAL EQUIPMENT CONNECTIONS

Cable Box Connection

Follow this diagram when connecting your television to a
cable box only.

TERMINALS ON BACK OF TELEVISION

HDMI

Incoming
Cable

CABLE BOX

15

ANT IN ANT OUT

AV IN

ANT

AUDIO
IN

VIDEO

L

R

Y

B

P

PR

12
COMPONENT
VIDEO INPUT





S-VIDEO

VIDEO

INPUT

INPUT INPUT

PROG
OUT

2 3

1

CABLES NOT INCLUDED

L

R

TO AUDIO
AMP

Note: Rear A/V jacks diagram may vary, depending on model.

Please refer to the FEATURE CHART on page 4 for your
model’s capabilities.

Viewing a premium (scrambled) cable channel

Procedure

• Tune the television to Channel 3.

• Using the cable box, tune to the premium cable channel
you want to view.

VCR and Cable Box Connection

Follow this diagram when connecting your television to
both a VCR and a cable box.

VCR

PLAY

R

FF

E
W

VIDEO OUT

L
AUDIO OUT
R

ANT IN ANT OUT

ANT OUT ANT IN

STOP

ANT

CABLE BOX

15

Incoming
Cable

Note: Rear A/V jacks diagram may vary, depending on model.

Please refer to the FEATURE CHART on page 4 for your
model’s capabilities.

Viewing a premium (scrambled) cable channel

Procedure

• Tune the television to Channel 3.

• Using the cable box, tune to the premium cable channel
you want to view.

TERMINALS ON BACK OF TELEVISION

HDMI

AV IN

AUDIO
IN

VIDEO

L

R

Y

P

B

P

R

12
COMPONENT
VIDEO INPUT





S-VIDEO

VIDEO

INPUT INPUT

INPUT

1

CABLES NOT INCLUDED

CABLES NOT INCLUDED

2 3

PROG
OUT

L

R

TO AUDIO
AMP

ENGLISH

7 z

OPTIONAL EQUIPMENT CONNECTIONS

VCR and Cable Box Connection (Cont.)

Recording a premium (scrambled) cable channel

Procedure

• Press the TV/VIDEO button on the remote control to
select the video input (VIDEO 1, VIDEO 2, etc.)
connected to your VCR.

• Turn the VCR ON.

• Tune the VCR to Channel 3 or 4, depending on the
switch setting on the back of VCR.

• Using your cable box, tune to the premium cable channel
you want to record.

• Begin recording.

 To view a different channel while recording:

• Press the TV/VIDEO button on the remote control to
select TV mode.

ENGLISH

• Tune the television to a program (except another
premium cable channel).

Front Control Panel

The front control panel can be used to access menus and
switch video mode when the remote control is not available.

Note: The ON/OFF indicator LED (red) will be lit when set is

on.

ON /OFF INDICATOR

INFRARED SENSOR

Front Panel

S-VIDEO



VIDEO 4 L - AUDIO - R

TV/VIDEOPOWER BBE

CH 

I

O

T

C

N

A

VOL 

 VOL

CH 

POWER ON/OFF

Note: For model CT-30WC14 front A/V is labelled

VIDEO 3.

A second VCR, Camcorder, a video disc player, video game
equipment or DSS equipment can also be connected to the
video inputs. See the optional equipment manual for details

Procedure

• Connect equipment to front Audio/Video input jacks.

•Press TV/VIDEO button to select front VIDEO input
mode.

• Operate optional equipment as instructed in equipment
manual.

Amplifier Connection (TO AUDIO AMP)

To listen through a separate stereo system, connect an
external audio amplifier to TO AUDIO AMP outputs on back
of television.

Note: TO AUDIO AMP terminals cannot be connected directly

to external speakers.

Audio Adjustments

• Select SPEAKERS ON located in the onscreen AUDIO
menu.

• Set amplifier volume to minimum.

• Adjust television volume to desired level.

• Adjust amplifier volume to match the television.

• Select SPEAKERS OFF & VARIABLE AUDIO OUT from
AUDIO menu.

Note: Variable Audio Out is not available in model

CT-30WC14.

• Volume, mute, bass, treble and balance are now
controlled through the television.

Note: Select SPEAKERS OFF & FIXED AUDIO OUT to control

audio functions through the external amplifier.

Digital TV - Set-Top Box (DTV-STB) or DVD
Connection

This television is capable of displaying 1080i and 480p DTV
signals when connected to a DTV tuner set-top-box (STB). In
order to view DTV programming, the STB must be connected
to the component video inputs (Y,PB,PR) of the television. A
DTV signal must be available in your area. Select the output of
the STB to either 1080i or 480p.

This television also utilizes a progressive scan doubler, which
de-interlaces the NTSC signal and progressively scans the
image. This allows you to sit close to the TV and not see the
thin black horizontal lines (venetian blind effect) associated
with interlaced TV pictures.

Use this diagram to connect the DTV-STB or DVD player to
the back of your television.

TERMINALS ON BACK OF DTV-STB OR DVD PLAYER

DIGITAL TV OUTPUT

Y

P

R

B

.

MAIN

-R
O

I

VIDEO

UD

-A
L

R-AUDIO-L - VIDEO S-VIDEO

NTSC OUTPUT

P

ANT

Note: There are three video jacks, Y, PB, and PR. Separate

component color inputs provide luminance and color
separation. Use the L (left) and R (right) audio inputs.

TERMINALS ON BACK OF TELEVISION

HDMI

AV IN

VIDEO

L

AUDIO
IN

R

Y

B

P

P

R

12
COMPONENT
VIDEO INPUT





S-VIDEO

VIDEO

INPUT

INPUT INPUT

PROG
OUT

2 3

1

CABLES NOT INCLUDED

L

R

TO AUDIO
AMP

ANT

8 z

HDMI

AV IN

TERMINALS ON BACK OF TELEVISION

VIDEO

AUDIO
IN

Y

P

P

L

R

B

R

12
COMPONENT
VIDEO INPUT



INPUT

1

CABLES NOT INCLUDED



S-VIDEO

INPUT INPUT

2 3

VIDEO

PROG
OUT

L

R

TO AUDIO
AMP

EXTERNAL AMPLIFIER

90.7 MHZ

Program Out Connection (PROG OUT)

To use the television audio and video with optional equipment,
connect the PROG OUT and TO AUDIO AMP connections on the
back of the television.

Note: If the Main Picture signal is Component Video Input or

HDMI, no Program out signal will be available.

TERMINALS ON BACK OF TELEVISION

HDMI

AV IN

VIDEO

Y

P

B

P

R

AUDIO
IN

L

R

12
COMPONENT
VIDEO INPUT

ANT





S-VIDEO

VIDEO

INPUT

INPUT INPUT

PROG
OUT

2 3

1

CABLES NOT INCLUDED

L

R

TO AUDIO
AMP

MONITOR

VCR

OR

Note: Rear A/V jacks diagram may vary, depending on model.

Please refer to the FEATURE CHART on page 4 for your
model’s capabilities.

Procedure

• Connect optional equipment to PROG OUT and TO
AUDIO AMP L/R terminals.

• PROG OUT terminal display is the same as on-screen
display.

• See optional equipment manual for further instructions
for recording and monitoring.

HDMI (High Definition Multimedia Interface) input connection

About HDMI

HDMI is the first all digital consumer electronics A/V
interface that supports several uncompressed standards,
enhanced and high definition video formats as well as
existing multi-channel audio format. One jack supports both

video and audio information. The HDMI/HDCP

2

be connected to an EIA/CEA 861

compliant consumer
electronic device, such as a set top box or DVD player
equipped with an HDMI or DVI output connection. By
inputting a High-bandwidth Digital Content Protection
(HDCP) high definition picture source to the HDMI terminal
of this TV, high definition pictures can be displayed on the
screen in their digital form. The HDMI input terminal is not
intended to be used with personal computers. This TV is
compatible with 1080i, 480p and 480i formats. Select the
output of the connecting device to match that of the TV.

Notes:

1. HDMI/HDCP = High Definition Multimedia Interface /
High-Bandwidth Digital Copy Protection.

2. EIA/CEA-861 Profiles compliance covers profiles for
transmission of uncompressed digital video including
high bandwidth digital content protection.

1

input can

OPTIONAL EQUIPMENT CONNECTIONS

Compatible formats

This TV is compatible with the following formats. Please
set the connecting device to the following format.

Video signal

Format No. of dots

1080i 1920 x 1080i 59.94 / 60

480p

720 x 480p
640 x 480p

480i 720 x 480i 59.94 / 60

Audio signal

When digital audio is included in the HDMI connection,

the compatible sampling frequencies are 48 KHz /

44.1KHz / 32 KHz.

Connection diagram

Follow the diagram below to connect the TV to a set top box or a
DVD player.

HDMI

AV IN

Incoming
Cable

Note: Use analog audio when no digital
audio is available.

ANT

CABLES NOT INCLUDED

* The connector on the TV is HDMI Type A connector.

TERMINALS ON BACK OF TELEVISION

VIDEO

Y

P

B

P

R

L

AUDIO
IN

R

12
COMPONENT
VIDEO INPUT

Procedure

• Connect the HDMI output from the set top box or a DVD
player to the HDMI input on the back of the TV.

• Press TV/VIDEO button on the remote control to select
HDMI input. The interface on the TV is an HDMI Type A
connector.

• If the external device has a DVI output only, use a DVI to
HDMI adaptor cable*

the TV. Also, connect the Audio Out signal from the
external device (set top box or DVD player) to the Audio

4

In*

jacks below the HDMI input.

• If you cannot display the picture because your Digital Set
Top Box does not have a Digital Out terminal setting, use
the Component Video Input (or the S-Video Input or
Video Input). In this case, the picture will be displayed as
an analog signal.

Notes:

*3. HDMI-DVI conversion cable (TY-SCH03DH) available

on Panasonic Website: www.panasonic.com (only
for USA customers).

*4. Please refer to page 19 for Audio setting detail.

3

to connect to the HDMI jack on

Vertical scanning

frequency (Hz)

59.94 / 60

59.94 / 60





S-VIDEO

VIDEO

INPUT

INPUT INPUT

PROG
OUT

2 3

1

LR

AUDIO OUT

EXTERNAL DIGITAL
COMPONENT

L

R

TO AUDIO
AMP

HDMI

OUT

ENGLISH

9 z

SPECIAL FEATURES

Special Features

ASPECT Button

Customer Options depending on Component Input Signal

INPUT
SIGNAL

1080i 16:9 only No options

480p (16:9) Default to 16:9

480p (4:3)

480i Default to JUST mode

DISPLAY ON SCREEN

Default to FULL mode.

Note: Will stretch picture

horizontally.

The ASPECT button on the remote control lets you choose
one of four display modes, depending on the formats of the
received signal and your preferences.

ENGLISH

Input Signal

480i or 480p

Input Signal

480i or 480p

ASPECT

4:3

ASPECT

ZOOM

Note: If menu is displayed while in Zoom mode, the aspect

will change to Full to display complete menu.

Input Signal

480i or 480p

Input Signal

480i

ASPECT

FULL

ASPECT

JUST

Image on

16:9 Screen Size

4

Image on

16:9 Screen Size

16

Image on

16:9 Screen Size

16

Image on

16:9 Screen Size

16

This will display a 4:3 picture
at its standard 4:3 size with
black side bars. (Not
recommended for viewing
4:3 pictures as it may create

3

a permanent image on
screen if displayed for a
prolonged period of time.)

This will expand the 4:3
picture uniformly (width and
height) to full screen width
and then reposition the
picture vertically.

9

(Recommended for letterbox
pictures.)

This will show picture at full
screen size. (Recommended
for anamorphic pictures.)

9

This will stretch the right and
left edges of a 4:3 picture to
fill the screen, The center of
the screen will have aspect
correction applied. The size

9

of the picture will depend on
the original signal.
(Recommended for regular

TV viewing.)

BBE Button

Press this button to turn BBE sound feature On or Off.

SAP Button

Press this button to let you cycle through different audio modes.
For example:

• If receiving STEREO, SAP and MONO or receiving
STEREO and MONO only, pressing SAP button will
toggle the audio as follows:

STEREO  SAP  MONO

ASPECT BUTTON

OPTIONS

4:3, Full or Zoom (see

below)

4:3, Full or Zoom (see

below)

4:3, Full, Just or

Zoom (see below)

Split Operation

This feature lets you watch two different channels side by
side with or without an external video source.

Procedure

• Press to display Split frame.

• Choose channels for the SPLIT frame by pressing

Note: Split frame channel can only be changed while right

• Select channels for the Main picture by pressing

•Press to switch the SPLIT FRAME and MAIN

•Press to view picture source status.

• Press to cancel Split frame.

SPLIT

SPLIT CTRL

in Split frame, then use or the remote

button. The right indicator ( ) will appear

CH

or

CH

control numeric keypad.

indicator ( )is displayed in split frame.

Change Main Picture channel Change Split Frame channel

CH

or

CH

or use the remote control numeric keypad.

SWAP

PICTURE source.

RECALL

SPLIT

Split Operation With a Cable Box

To view premium (scrambled) cable channels through your
cable box in the Main Picture:

Note: Use this procedure if you want to watch premium cable

channels in the Main Picture while viewing a television
program or video in the Split frame.

Procedure

• Tune TV to Channel 3.

• Press on the remote control to display Split

Note: Audio is from the Main Picture only.

• Verify that the Cable box is ON.

• Choose channels for the Main Picture by tuning the

• Choose channels for the SPLIT frame by pressing

Note: Swap is not available when using the cable box to tune

SPLIT

frame.

cable box.

CH

CH

or

SPLIT CTRL

button, then use or the remote

control numeric keypad.

channels. If your cable box has video output, it can be
connected to the TV to allow you to use all SPLIT
functions.

10 z

Split Operational Buttons

SPLIT CTRL Button

CH

CH

or

Pressing will enable you to use or

SPLIT CTRL

numeric keys for changing split channel and to use TV/
VIDEO button to select desired input for split frame.

TV/VIDEO Button

Press when Split frame is displayed to select desired input
mode.

Procedure

• Press to display Split frame.

• Press to use remote control for split

• Press to display video input menu.

• Press corresponding number key on the remote control

Note: Split frame input mode can only be change while right

Main Picture

Note: Model CT-30WC14 has one Component Input and

SPLIT

SPLIT CTRL

operation.

TV/VIDEO

to select the input of your choice.

indicator ( )is displayed.

COMPONENT1

TV

VIDEO 1/2/3/4

SPLIT Frame

three Video inputs.

COMPONENT2

HDMI-IN

SPECIAL FEATURES

Freeze Button

This feature is used to stop action in Split frame.

Procedure

SPLIT

• Press to display split frame.

FREEZE

• Press to stop split frame action.

FREEZE

• Press again to continue action.

SPLIT

• Press to cancel frame.

Main Picture

Split freeze frame

ENGLISH

Main Picture Freeze Feature

This feature is used to stop action of the Main Picture and
display it on a Split freeze frame.

Procedure

FREEZE

• To stop action for Main picture, press while
Split frame is not displayed.

• Main Picture freeze will be displayed in Split frame.

FREEZE

• Press again to cancel Main Picture freeze
frame.

Note: While Main Picture freeze frame is displayed, only

FREEZE button is active for split frame. All other Split
buttons have no effect.

Direct Video Input Selection

Search Button

This feature lets you scan through all available channels.

Procedure

• Press to display split frame.

• Press to display search frames.

•Press again to stop search feature. Split

• Press to cancel split frame.

Main Picture

Note: When main picture is component or HDMI signal, Search

SPLIT

SEARCH

SEARCH

frame channel will be the last active search frame.

SPLIT

2

3

4

Search Frames

feature is not available.

This feature lets you select video inputs directly using the
TV/VIDEO button and the numeric keys on the remote
control.

Procedure

• Press on the remote control to display the

1 TV

2 COMPONENT1
3 COMPONENT2
4 HDMI
5 VIDEO1
6 VIDEO2
7 VIDEO3
8 VIDEO4

• Press corresponding number key on the remote control

Note: Video input can also be selected by pressing TV/VIDEO,

TV/VIDEO

Input selection menu.

1 TV

2 COMPONENT1
3 HDMI
4 VIDEO1
5 VIDEO2
6 VIDEO3

For model CT-30WC14 only.

to select the input of your choice.

then the CH buttons.

11 z

REMOTE CONTROL OPERATION

Remote Control Operation

POWER

Press to turn ON and OFF.

MUTE

Press to mute sound. Press to display and
cancel CC (Closed Caption).

A

D

U

V

D

R

C

V

T

D

V

T

ENGLISH

Press to select remote operation.

Press to adjust TV sound and navigate in
menus.

Press to access menus.

C

B

V

VOL VOL

ACTION

X

R

C

V

R

L

D

B

S

ASPECT

Select picture size (ratio) to match
programming format.

TV/VIDEO

Press to select TV or input modes for main
picture or split frame.

Note: Refer to TV/VIDEO Button section on

page 11 for selecting split frame input.

SAP

Press to access audio modes (Stereo, SAP
or Mono).

LIGHT

Press to illuminate remote buttons.

CH
CH

Press to select next or previous channel and
navigate in menus.

EXIT

Press to exit TV and DBS menus.

BBE

MENU

BBE - Press to turn on or off.
MENU - Press to access DBS or DVD menus.

RECALL

Press to display time, channel, sleep timer,
and other options.

1 2

4

7

3

5

6

8

9

0

Press numeric keypad to select any channel.

R-TUNE

Press to switch to previously viewed
channel or input modes.

EUR7603ZF0

GUIDE

DBS functions button.

PAG E

DBS page up/down and DVD skip -/+
buttons.

PROG

Press to enter minor number in a compound
number.

*SWAP

REW

*FREEZE

PAUSE

TV/VCR

*(FREEZE)

*SPLIT

PLAY



*SEARCH

STOP

DVD/VCR CH

**SPLIT CTRL

FF

REC

OPEN/CLOSE

*(SEARCH)

*Split function buttons

Component function buttons

12 z

**While split frame is displayed press

SPLIT CTRL

button: right indicator will be displayed in split
frame. Then use CH /CH  or numeric keypad
to change channels and TV/VIDEO to select input
for split frame.

Operating Components with Remote Control

Note: Refer to page 15 for programming Remote Control

procedure.

Operating a VCR

Program the remote control to use with VCR.

TO DO THIS...

Turn on/off

Select TV Input
mode for VCR

Change Channels
up/down

Change Channels
up/down

Record

Play

Stop

Operating a DBS

Program the remote control to use with DBS.

TO DO THIS...

Turn on/off

STB Audio track

Navigation
up/down

STB Change
Channels up/down

STB Aspect

STB Menu

STB Exit

STB program info

STB FAV

STB Record

PRESS TO DO THIS... PRESS

POWER

TV/VIDEO

CH

CH

DVD/VCR CH

REC

PLAY

X

STOP

Rewind the
Tape

Fast Forward

Select a Channel

Pause

Change to TV or
VCR Mode

On screen VCR

Display

1 2

4

7

PAU SE

TV/VCR

RECALL

PRESS TO DO THIS... PRESS

POWER

SAP

CH
CH

DVD/VCR CH

ASPECT

MENU

EXIT

RECALL

PLAY

X

REC

Navigation
left/right

STB Action

Select a
Channel

Previous
Channel

STB page
up/down

STB guide

STB search

STB select
dash channel

STB M. guide

STB jump

ACTION

1 2

4

7

R-TUNE

PAG E

GUIDE

OPEN/CLOSE

PROG

SWAP

REW

FF

5

809

VOL VOL

5

809

FF

3

6

3

6

REMOTE CONTROL OPERATION

Operating a DVD

Program the remote control to use with DVD

TO DO THIS...

Turn on/off Skip search<<

Navigation
left/right

Navigation
up/down

Ch -/+

Record

Play

Stop

Open/Close

Skip -/+

Operating a CD

Program the remote control to use with CD.

TO DO THIS...

Turn on/off Play

Time format

Next/previous
track

Random / repeat.

Search FF

Skip -/+

Stop

PRESS TO DO THIS... PRESS

POWER

VOL VOL

CH

Skip search>>

Select chapter

CH

DVD/VCR CH

REC

PLAY

X

STOP

OPEN/CLOSE

PAG E

Pause

Select

DVD Display

Menu

Titl e

PRESS TO DO THIS... PRESS

POWER

RECALL

CH

Next disk

Select Tracks

CH

DVD/VCR CH

FF

PAG E

STOP

Next disk

Search Rew

Still/pause

Open/Close

REW

FF

1 2

4

5

7

809

PAUSE

ACTION

RECALL

MENU

GUIDE

PLAY

X

GUIDE

1 2

4

5

7

809

R-TUNE

REW

PAU SE

OPEN/CLOSE

3

6

ENGLISH

3

6

Change to TV or
SAT Mode

TV/VCR

13 z

REMOTE CONTROL OPERATION

Operating a DTV Set Top Box

Program the remote control to use with DTV.

TO DO THIS...

Turn on/off

SAP

Navigation
up/down

Navigation
left/right

Aspect

ENGLISH

DTV Action

Exit

Operating a Receiver

Program the remote control to operate audio receiver.

TO DO THIS...

Turn on/off Volume + /-

PRESS TO DO THIS... PRESS

POWER

SAP

CH

CH

VOL VOL

ASPECT

ACTION

EXIT

Program
Information

Guide

Select
Channel

Select dash
number

Record

Menu

PRESS TO DO THIS... PRESS

POWER

RECALL

GUIDE

1 2

4

7

PROG

REC

MENU

5

809

VOL VOL

TO DO THIS...

PVR left/right Pause

Change
Channels

PRESS TO DO THIS... PRESS

VOL VOL

DVD/VCR CH

Replay zone

PAUSE

R-TUNE

up/down

3

6

PVR select

Record

Play

Stop

Menu

Enter

ACTION

REC

PLAY



STOP

MENU

RECALL

Instant replay

Return to live

Quick skip

Replay guide

Exit

TV/VCR

PROG

OPEN/CLO SE

GUIDE

EXIT

Operating a Cassette Deck

To operate a cassette deck, the remote control must be in
AUX mode and be programmed with the appropriate code
for your equipment.

TO DO THIS...

Turn on/off Rewind

PRESS TO DO THIS... PRESS

POWER

REW

numeric keypad

AVI Press 1
AV2 Press 2

Audio Mute

Switch input Surround -

Tuner +/- Surround +

MUTE

TV/VIDEO

CH

To select AV input
or Components

AV3 Press 3
AV4 Press 4
CD Press 5
TUNER Press 6
PHONO Press 7
TAPE Press 8
AUX Press 9

CH

Center-/+

DVD/VCR CH

Operating a PVR (Personal Video Recorder)

Program the remote control to use with a PVR.

TO DO THIS...

Turn on/off Rewind

PRESS TO DO THIS... PRESS

POWER

Press Remote

REW

FF

REW

Record

Play

Stop

Deck A/B

REC

PLAY



STOP

R-TUNE

Fast Forward

Pause

Open/Close

PAUSE

OPEN/CLOSE

Operating a CABLE BOX

Program the remote control to use with Cable Box.

TO DO THIS...

Turn on/off

Audio Mute

Change
Channels
up/down

Change Channels
up/down

PRESS TO DO THIS... PRESS

POWER VOL VOL

MUTE

CH
CH

DVD/VCR CH

Volume
up/down

Enter

Select a
Channel

Previous
Channel

ACTION

1 2

4

7

R-TUNE

FF

5

809

3

6

Select TV/VCR Fast Forward

PVR up/down Select a Channel

TV/VIDEO

CH

CH

14 z

FF

1 2

4

7

5

809

3

6

Programming The Remote Control

REMOTE CONTROL OPERATION

The Universal Remote Control can be programmed to
operate many manufacturers’ components using the
component function buttons for VCR, DVD, AUX, RCVR,
DTV CABLE or DBS. Follow the procedures for
programming your Remote Control with or without a code
for the component.

Default Modes for Remote Control

Device Operates Default

TV

DTV-STB

CABLE

DBS

VCR

DVD/CD

AUX

RCVR

Note: Determine the manufacturer of the component and look

in the table for the code (found on page 16 and 17).

TV (Panasonic Only) Panasonic TV Code

DTV (Panasonic Only) Panasonic DTV Code

CABLE (Preset)

DBS (Preset) Panasonic DBS Code

VCR (Preset) Panasonic VCR Codes

DVD and CD (Preset) Panasonic DVD Codes

Personal Video Recorders,

Tape and VCR2

Audio receiver (Preset) Panasonic RCVR code

Panasonic CABLE

Code

Panasonic Personal

Video Recorder Code

Procedure

1. Confirm that the external component is plugged in and
operating.

2. Turn the component off.

3. Press and together for at least 5

ACTION

seconds. After 5 seconds, the illuminated mode

(component) buttons will begin to flash. Release the
ACTION and POWER buttons.

4. Press appropriate component button on the Remote
Control: VCR, DVD (CD), AUX (VCR2 or TAPE),

RCVR, DTV, CABLE or DBS.

will illuminate steadily and all others will go out.

5. Enter the 3-digit component code using the Remote
Control numeric keypad (0 ~ 9 buttons). The component
button will blink twice.

6. Press the Remote Control to test the
component. If the procedure was successful, the

component will turn on and the component key will blink
twice and then go out.

Note: If the component does not operate with the Remote

Control, repeat the steps 3 through 6 using another code
(some brands have multiple codes). If an incorrect code
is entered, or if the procedure takes longer than 30
seconds, the programming will fail.

POWER

The component button

POWER

Programming Without A Code

This procedure searches all codes and is called the
“sequence method.”

1. Confirm that the external component is plugged in and
on.

2. Turn the component off.

3. Press and together, for at least 5

ACTION

seconds. After 5 seconds, the illuminated mode

(component) buttons will begin to flash. Release the
ACTION and POWER buttons.

4. Press the appropriate component button on the Remote
Control. The component button will illuminate steadily
and all others will go out.

5. Press the button to set the remote control to the

POWER

step and set mode.

6. Point the remote control towards the component.

7. Press VOL  (the mode key will blink three times), then

press the Remote Control button to test the
component. Continue this process until the proper code

is found. If the procedure was successful, the component
will turn on.

Note: Each time you press the VOL  button, make sure that the

component key blinks twice before pressing the POWER
button.

8. Once the device responds, press to store the
code. The mode (component) button will blink twice.

Note: It may take many attempts before the correct code

is found. If you miss a code, press  VOL, then press

POWER

the button to test the component.

POWER

POWER

ACTION

Component Codes

The Universal Remote Control is capable of operating
many component brands after entering a code. Some
components may not operate because the codes are not
available due to limited memory. The Universal Remote
Control does not control all features found in each model.

Write the code numbers from tables in this space.
This will serve as a reference if you need to program
your Remote Control.

VCR DVD DVD (CD)

ENGLISH

AUX (VCR2) AUX (TAPE) RECEIVER

DTV CABLE DBS

15 z

REMOTE CONTROL OPERATION

Component codes

Codes For VCR

Brand Code

Admiral
Aiwa
Akai
Audio

Dynamic
Bell & How-

ell

335
332
314, 315, 316, 329

311, 339

305, 313

Broksonic 320, 326
Canon
CCE

ENGLISH

Citizen 306
Craig
Curtis

Mathes
Daewoo
DBX
Dimensia

Emerson

Fisher

Funai
GE
Goldstar
Gradiente

323, 325
343

305, 306, 329

324, 345

301, 324, 343
310, 311, 339
345
303, 319, 320,

325, 326, 343
305, 307, 308,

309, 313
320, 326, 334
324, 333, 345
306
334

Hitachi 300, 323, 345
Instant

Replay
Jensen
JVC

323, 324

339
310, 311, 334, 339

Kenwood 306, 310, 311, 339

LXI

Magnavox
Marantz
Marta
Memorex

MGA

300, 305,
306,307, 308, 309

323, 324, 331
310, 311, 339
306
309, 324
338, 340, 341,

347,348

Minolta 300, 345

Mitsubishi

Multitech
NEC
Olympic

338, 340, 341,
347, 348

304, 347
310,311, 334, 339
323, 324

Optimus 306, 321, 328, 335
Orion
Panasonic

320, 326
321,322, 323, 324

Codes For VCR (Contd.)

Brand Code

Penney

Pentax

Philco

300,305, 310, 311,
324, 339, 345

300,311, 345
320, 323, 324,

326, 331, 343

Philips 323, 324, 331
Pioneer 323

300, 301, 302,

Proscan

Quasar

Radio Shack

RCA

Realistic

Samsung
Sansui
Sanyo

Scott

Sears

Sharp

323, 324, 331,
333, 345, 346

321, 322, 323, 324
305, 309, 324,

333, 336, 340
300, 301,302,

323, 324, 331,
333, 345, 346

305, 309, 324,
336, 340

302, 304, 333
320, 326, 339, 352
305, 309, 313
301, 302, 304,

309, 320, 326,
338, 340, 347, 348

300, 305, 306,
307, 308

335, 336

Shintom 317
Signature

2000
Singer
Sony

335

337
328, 329, 330

Sylvania 323, 331, 324
Ta sh i ro 306
Tatung
Teac
Technics
Te kn i ka

310, 311, 339
310, 311, 339
321, 322, 323, 324
324

To sh i b a 301, 346
Vector

Research

Wards

Yamaha
Zenith

311

306, 309, 335,
336, 344

305, 310, 311, 339
306,344

Codes For Cable Box

Brand Code

ABC 124
Archer 125, 132
Cableview 105, 132
Citizen 105,122
Curtis 112, 113
Diamond 124, 125, 132
Eagle 129
Eastern 134
GCbrand 105, 132
Gemini 122

General
Instrument/
Jerrold

Hamlin

111, 119, 120,
121, 122, 124,
125, 126,127

112, 118, 140,

141, 142, 145
Hitachi 103, 124
Macom 103, 104, 105
Magnavox 133
Memorex 130
Movietime 105, 132
Oak 102, 137, 139
Panasonic 109, 110, 114

Philips

106,107, 128,

129, 130
Pioneer 101, 116
Pulsar 105, 132
Puser 132
RCA 115
Realistic 132

Regal

112, 118, 140,

141, 142, 145,
Regency 134
Rembrant 105, 132, 137
S.A. 111, 112, 113
Samsung 105
Scientific

Atlanta

111, 112, 113

Slmark 101, 105
Sprucer 105, 110
Stargate 105, 132
Te le vi ew 101, 105
Texscan 144
Tocom 135
Toshiba 104
Unika 125, 132
Universal 122, 132

Codes For DBS

Brand Code

Dish Network

105, 115, 116

(Echostar)
Echostar 105
Express VU 105, 115
G. E . 106
G.I. (General

108

Instrument)
Gradiente 114
Hitachi 103, 111,

112
HNS (Hughes) 103
Magnavox 101, 102
Panasonic 104
Philips 101, 102
Primestar 108
Proscan

106, 109, 110,

113

RCA 106, 109,

110, 113
Sony 107
Star Choice

103, 108

Toshiba 100
Uniden 101, 102
Zenith 127

Codes For DVD

Brand Code

Denon 100
Ferguson 101
JVC 109
Mitsubishi 105
Nordmende 101
Panasonic 100
Philips 103
Pioneer 102
RCA 101
Saba 101
Samsung 11 0
Sharp 108
Sony 104
Technics 100
Thomson 101
Toshiba 103
Yamaha 100
Zenith 107

Videoway 106
Viewstar 129, 130
Zenith 100, 117
Zenith/.Drake

Satellite

100

16 z

Component Codes (Cont.)

Codes for Cassette Decks

Marca Código

Aiwa

Denon 231
Fisher 203
Jensen 214
JVC 229, 230
Kenwood 200, 207
Marantz 202
Nakamichi 205
Onkyo 208, 209, 213
Panasonic 216, 218
Philips 222
Denon 231
Fisher 203
Jensen 214
JVC 229, 230
Kenwood 200, 207
Marantz 202
Nakamichi 205
Onkyo 208, 209, 213
Panasonic 216, 218
Philips 222

Pioneer 204
RCA 226, 227, 228
Sansui 205, 210
Sharp 231
Sony 219, 220
Te ac 210, 211, 215
Technics 216, 218
Yam aha 201, 202

223, 224, 225

Codes for Receivers

Marca Código

Admiral 120
Aiwa 125, 126
Denon 134, 135, 136
Fisher 104
Garrard 113
Harman

Kardon
Jensen 129
JVC 132, 133
Kenwood 100, 108
Magnavox 127
Marantz 124
Mclntosh 116
Nakamichi 106
Onkyo 109, 114

Optimus

Panasonic 118, 119, 121
Philips 123
Pioneer 105, 107
Quasar 118, 119, 121

RCA

Sansui 103, 111, 139
Sharp 134, 137
Sony 122
Soundesign 138
Tea c 111, 112 , 113
Technics 118, 119, 121
Victor 132, 133
Yam aha 101, 102

115, 123

103, 127, 130,
131

103, 105, 127,
130, 131

Codes For CD Player

Brand Code

Admiral 226
Aiwa 233, 235
Carver 229
Denon 242
Emerson 239
Fisher 205

Harman/Kardon

Hitachi 207
Jensen 234
JVC 240, 241, 245
Kardon 223

Kenwood

LXI/Sears 236
Magnavox 229, 232
Marantz 229
McIntosh 221
Nakamichi 210
Onkyo 214, 215

Optimus

Panasonic 224, 225, 227
Philips 229, 230
Pioneer 208
Quasar 224, 225, 227

RCA

Sansui 210, 246
Sanyo 205
Scott 210, 246
Sharp 242, 243
Sherwood 220
Sony 228
Soundesign 244
Te ac 212, 216, 218
Technics 224, 225, 227
Victor 240, 241, 245
Yamaha 202, 203, 204

219, 220,
221, 223

200, 201, 211,
245

208, 218,
220, 222

231, 237,
238, 247

REMOTE CONTROL OPERATION

Codes For Personal Video

Recorders

Brand Code

Panasonic Replay
TV

Philips Tivo 102
Sony Tivo 101

100

ENGLISH

17 z

BASIC MENU NAVIGATION

I

O

I

O

Basic Menu Navigation

EXIT

Press

to display the
Main Menu.

Press

to choose the
desired icon.

ENGLISH

Press to enter the sub-

menu field.

Press to select desired

sub-menu.

PICTURE

PIC MODE

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

- - - - - - - - - - - - - - - -I- - - - - - - - - - - -

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

COLOR

- - - - - - - - - - - - - - - -I- - - - - - - - - - - -

TINT

- - - - - - - - - - - - - - - -I- - - - - - - - - - - -

BRIGHTNESS

- - - - - - - - - - - - - - - - - - - - - - - - - - - l

PICTURE

- - - - - - - - - - - - - - - - - - - - - l - - - - - -

SHARPNESS

NORMAL

OTHER ADJ.

PRESS ACTION FOR MAIN MENU

EXIT

PICTURE

PICTURE

PICTURE

PIC MODE

PIC MODE

PIC MODE

COLOR

COLOR

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

- - - - - - - - - - - - - - - -I- - - - - - - - - - - -

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

COLOR

TINT

TINT

- - - - - - - - - - - - - - - -I- - - - - - - - - - - -

TINT

BRIGHTNESS

BRIGHTNESS

- - - - - - - - - - - - - - - -I- - - - - - - - - - - -

BRIGHTNESS

PICTURE

PICTURE

- - - - - - - - - - - - - - - - - - - - - - - - - - - l

PICTURE

- - - - - - - - - - - - - - - - - - - - - l - - - - - -

SHARPNESS

SHARPNESS

SHARPNESS

NORMAL

NORMAL

NORMAL

OTHER ADJ.

OTHER ADJ.

OTHER ADJ.

PRESS ACTION FOR MAIN MENU

PRESS ACTION FOR MAIN MENU

PRESS ACTION FOR MAIN MENU

sub Menu
Field

PICTURE

PIC MODE

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

- - - - - - - - - - - - - - - -I- - - - - - - - - - - -

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

COLOR

- - - - - - - - - - - - - - - -I- - - - - - - - - - - -

TINT

- - - - - - - - - - - - - - - -I- - - - - - - - - - - -

BRIGHTNESS

- - - - - - - - - - - - - - - - - - - - - - - - - - - l

PICTURE

- - - - - - - - - - - - - - - - - - - - - l - - - - - -

SHARPNESS

NORMAL

OTHER ADJ.

PRESS ACTION FOR MAIN MENU

VIVID



I
I

I
I

NO

VIVID

VIVID

VIVID



_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

I I I I I I I I I I I I I I I I

I I I I I I I I I I I I I I I I

I
I

I
I

- - - - - - - - - - - - - - - -I- - - - - - - - - - - - - - - -

- - - - - - - - - - - - - - - -I- - - - - - - - - - - - - - - -

I I I I I I I I I I I I I I I

I I I I I I I I I I I I I I I

I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I

I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

I I I I I I I I I I I I I I I I

I I I I I I I I I I I I I I I I

NO

N

N

VIVID



I
I

I
I

NO

Press to enter sub sub-menu

field.

Press to select desired sub

sub-menu.

Press to select or adjust

desired sub sub­menu.

PICTURE

COLOR TEMP

NATURAL COLOR

VIDEO NR

3D Y/C FILTER

COLOR MATRIX

VM

MPEG NR

OTHER ADJ.

PRESS FOR MORE

PRESS ACTION TO RETURN

sub sub-Menu
Field

PICTURE

COLOR TEMP

NATURAL COLOR

VIDEO NR

3D Y/C FILTER

COLOR MATRIX

VM

MPEG NR

OTHER ADJ.

PRESS FOR MORE

PRESS ACTION TO RETURN

PICTURE

COLOR TEMP

NATURAL COLOR

VIDEO NR

3D Y/C FILTER

COLOR MATRIX

VM

MPEG NR

OTHER ADJ.

PRESS FOR MORE

PRESS ACTION TO RETURN

NORMAL

NORMAL

WARM

ON

OFF

ON

SD

ON

OFF

ON

OFF

ON

SD

ON

OFF

ON

OFF

ON

SD

ON

OFF

Press

to select or adjust
desired sub-menu.

Note: For sub-menu with OTHER ADJ.

Press to select OTHER ADJ.

BRIGHTNESS 32 ----------I---------

PICTURE

PIC MODE

COLOR

TINT

BRIGHTNESS

PICTURE

SHARPNESS

NORMAL

OTHER ADJ.

PRESS  to ENTER

PRESS ACTION FOR MAIN MENU

Note: To EXIT menus.

Press

repeatedly until Main Menu
Icon is highlighted.

Press to exit Main Menu.

or

Press

EXIT

to exit menus.

EXIT

Main Menu Icon

NORMAL PICTURE

18 z

Icon Menus Operation

PICTURE

Note: While sub-menu features are highlighted, press VOL 

to adjust or activate.

 PIC MODE - Lets you choose one of three pre-set

Picture Modes that best suits the program you are
viewing. Selecting this feature will also affect Color
Temperature setting.

PIC MODE - COLOR TEMP DEFAULT SETTINGS

PIC MODE COLOR TEMP

VIVID COOL

STANDARD NORMAL

CINEMA WARM

Note: Each mode has its own picture settings (Color, Tint, Brightness,

Picture and Sharpness) and Color Temp settings.

• VIVID - This is the default mode, It provides
enhanced picture contrast and sharpness for
viewing in a well-lit room.

• STANDARD - Recommended for normal viewing
conditions with subdued room lighting.

• CINEMA - Select this mode for watching movies in
a darkened room. It provides a soft, film-like
picture.

 COLOR - Adjusts desired color intensity.
 TINT - Adjusts natural flesh tones.
 BRIGHTNESS - Adjusts dark areas of picture.
 PICTURE - Adjusts white areas of picture.
 SHARPNESS - Adjusts clarity of outline detail.
 NORMAL - Reset each of the PIC Mode adjustments to

factory default settings.

PICTURE

PIC MODE

COLOR

TINT

BRIGHTNESS

PICTURE

SHARPNESS

NORMAL

OTHER ADJ.

PRESS ACTION FOR MAIN MENU

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

- - - - - - - - - - - - - - - -I- - - - - - - - - - - -

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

- - - - - - - - - - - - - - - -I- - - - - - - - - - - -

- - - - - - - - - - - - - - - -I- - - - - - - - - - - -

- - - - - - - - - - - - - - - - - - - - - - - - - - - l

- - - - - - - - - - - - - - - - - - - - - l - - - - - -

 OTHER ADJ.
Highlight OTHER ADJ. and press VOL  to display the sub
sub-menu.

Note: While sub sub-menu features are highlighted, press

VOL  to select or activate.

PICTURE

COLOR TEMP

NATURAL COLOR

VIDEO NR

3D Y/C FILTER

COLOR MATRIX

VM

MPEG NR

OTHER ADJ.

• COLOR TEMP (temperature) - To increase or decrease
WARM (red) and COOL (blue) colors to suit personal
preferences.

• NATURAL COLOR - To increase the color reproduction
range with natural color gradation and highly delicate
hues.

• VIDEO NR - Reduces noise in the channel, commonly
called snow.

• 3D Y/C FILTER - Minimizes noise and cross color in the
picture.

PRESS FOR MORE

PRESS ACTION TO RETURN

I

I

I

I

NORMAL

OFF

OFF

VIVID

ON

ON

SD

ON



NO

ICON MENUS OPERATION

• COLOR MATRIX - Available only with 480p signal.
Select HD or SD to automatically adjust color
parameters for HD (high definition) and SD (standard
definition). This feature is not selectable when viewing a
regular TV (NTSC) program.

Note: When viewing a non-standard DTV signal

format, you can change color parameters
manually for the best picture quality.

• VM (VELOCITY MODULATION) - Increase picture
sharpness and provides crisp white to black transitions

• MPEG NR - This feature reduces the block noise caused
by the MPEG video compression used in DVD and
HDTV sources.

AUDIO

Note: While sub-menu features are highlighted, press VOL 

to adjust or activate.

 MODE - Select STEREO, SAP (Second Audio

Program) or MONO. (Use MONO when stereo signal is
weak).

 BASS - Increase or decrease the bass response.
 TREBLE - Increase or decrease the treble response.
 BALANCE - Emphasize the left/right speaker volume.
 NORMAL - Reset BASS, TREBLE and BALANCE

adjustments to factory default settings.

AUDIO

MODE

BASS

TREBLE

BALANCE

NORMAL

OTHER ADJ.

 OTHER ADJ.

Note: While sub sub-menu features are highlighted, press

VOL  to adjust or activate.

OTHER ADJ.

• AI SOUND - Equalize overall volume levels across all
channels. (AI sound is not available in VIDEO mode).

• BBE

• SURROUND - Enhances audio response when listening

- BBE High Definition Sound restores clarity and

®

presence for better speech intelligibility and music
realism.

to stereo.

STEREO SAP MONO

- - - - - - I - - - - - - - -

- - - - - - I - - - - - - - -

- - - - - - - - - - I - - - - - - - - - - - -

 : EXIT  : SUB MENU

AUDIO

AI SOUND

BBE

SURROUND

HDMI IN

SPEAKERS

ON

PRESS ACTION TO RETURN

SET

ON

ON

OFF

AUTO



ENGLISH

19 z

ICON MENUS OPERATION

AUDIO (cont.)

 OTHER ADJ. (cont.)

• HDMI IN - When using HDMI, this feature will let you
switch between Analog Input and Digital Input.

• Auto - Automatically selects Analog / Digital signal.

• Digital - Digital Input only.

• Analog - Analog Input only.

• SPEAKERS - This feature is used when connecting to
an external amplifier.

• ON - TV speakers operate normally.

• OFF & Variable Audio Out - TV speakers off - audio

adjustable by television.

Note: Variable Audio Out is not available in model CT-30WC14.

• OFF & Fixed Audio Out - TV speakers off - audio

adjustable by the external amplifier only.

ENGLISH

CHANNELS

 CHANNEL SCAN - Select FAV or ALL.

Note: Use remote numeric keypad to select desired FAV

channels.

 FAVORITES - To enter up to 16 favorite channels. Use

remote control numeric keypad to select desired
channels.

CHANNELS

CH. SCAN

FAVORITES

OTHER ADJ.

ENTER CHANNEL

FAVORITE CHANNELS
3

K

: ADD

J

: DELETE

PRESS ACTION FOR MAIN MENU

 OTHER ADJ.

Highlight OTHER ADJ. and press VOL  to display the sub
sub-menu.

• PRESET CAPTION - To enter channel numbers for
popular TV stations.

Procedure

•Press CH  to select desired preset caption.

• Then use the remote numeric keypad to select

desired channel (refer to your local TV guide).

CHANNELS

PRESET CAPTION

MANUAL CAPTION

INPUT LABEL

OTHER ADJ.

PRESS ACTION TO RETURN

Note: To delete a channel, press  VOL while channel

number is highlighted.

• MANUAL CAPTION - To enter numbers and captions
manually.







ALL

3

CHANNELS

PRESET CAPTION

ABC

- - -

CBS

- - -

FOX

- - -

NBC

- - -

PBS

- - -

CNN

- - -

ESPN

- - -

HBO

- - -

PRESS G FOR MORE CHANNELS

PRESS ACTION TO RETURN

A&C
AMC
BET
BRAVO
CNBC
CNN/SI
COMEDY
COURT

Note: Use the remote numeric keypad to select desired

channel (refer to your local TV guide).

CHANNELS

MANUAL CAPTION

ENTER CHANNEL

ENTER CAPTION

 TO MOVE CURSOR 

 TO SELECT CHANNEL 

PRESS ACTION TO RETURN

_ _ _ _

3

OTHER ADJ.

PRESS ACTION TO RETURN

CHANNELS

PRESET CAPTION

MANUAL CAPTION

INPUT LABEL







• INPUT LABEL - To label video input connections for
onscreen display.

CHANNELS

K

K

K

OTHER ADJ.

PRESS ACTION TO RETURN

PRESET CAPTION

MANUAL CAPTION

INPUT LABEL

For model CT-30WC14 only.

CHANNELS

INPUT LABEL

COMPONENT1

COMPONENT2
HDMI
VIDEO1
VIDEO2
VIDEO3
VIDEO4

 TO MOVE CURSOR 

 TO SELECT LABEL 

PRESS ACTION TO RETURN

CHANNELS

INPUT LABEL

COMPONENT1

HDMI
VIDEO1
VIDEO2
VIDEO3

 TO MOVE CURSOR 

 TO SELECT LABEL 

PRESS ACTION TO RETURN

SKIP

VCR

DVD

SKIP

VCR

Procedure

•Press CH  or CH  to select the desired Video

input.

•Press  VOL or VOL  to select desired preset

input label (see chart below).

INPUT LABEL CHART

PRESET
LABELS

VCR Select when VCR is connected to video input.
DVD Select when DVD is connected to video input.

SKIP

CABLE

DBS Select when DBS is connected to video input.

- - -

- - -

- - -

- - -

- - -

- - -

- - -

- - -

DTV STB

PVR (Personal
Video Recorder)

GAME

AUX

_____ Select to delete input label.

REASON FOR SELECTING

Select to skip unused video input when

pressing TV/VIDEO button.

Select when CABLE box is connected

to video input.

Select when digital TV set-top-box is

connected

to video input.

Select when a personal video recorder is

connected to video input.

Select when video game is connected

to video input.

Select when other components are

connected.

20 z

TIMER

Note: Use CH  or CH  to highlight and use  VOL or

VOL 

to select.

TIMER

SLEEP

TIMER 1

TIMER 2

CLOCK SET

NO

Procedure

•Press VOL  to select.

• OFF - Turns Lock function off.

• GAME - Lock CH 3, 4 and Video inputs.

• CHANNEL - Lock up to four channels.

• ALL - Locks all channels and video inputs.

ICON MENUS OPERATION

LOCK

LOCK MODE

LOCKS CH 3, 4 AND

VIDEO INPUTS

GAME 

PRESS ACTION FOR MAIN MENU

 SLEEP - Select to turn TV off in 30, 60, or 90 minutes.

Select NO to turn sleep timer off.

 TIMER 1 and TIMER 2 - Select one or both timers to

turn the TV on and off at selected times, on a selected
channel, and on selected days.

Notes:

• The television automatically turns OFF after 90 minutes
when turned ON by the TIMER. If the OFF time is
selected or if a key is pressed, the automatic OFF after
90 minutes will be cancelled.

• The TIMER is active when the television is OFF or ON.
The television will switch to the selected channel at the
selected time set in the TIMER.

 CLOCK SET - Set the time of day and the day of the

week.

LOCK

 CREATE CODE FIRST - Use the remote numeric

keypad to enter a four-digit secret code (Use a code

that is easy to remember and record it in a safe
place).

LOCK

CREATE
CODE FIRST

 LOCK SET - To prevent video games, VCR tapes and

all channels and video modes from being viewed.

LOCK SET

V-CHIP SET

HOW LONG?

CODE

PRESS ACTION FOR MAIN MENU

Notes:

• If you do not remember your code, LOCK will unlock in
12, 24, or 48 hours, depending on the current set-up. Be
cautious when selecting ALWAYS. If ALWAYS is
selected and you forget your secret code, the TV must
be serviced by a qualified technician to clear the LOCK
set-up.

• If you select CHANGE CODE, and you change your
code from the one used in the LOCK menu, your new
code becomes the controlling code.

_ _ _ _

PRESS ACTION FOR MAIN MENU

LOCK

OFF 

BLOCK PROGRAMS:

U.S. TV PROGRAMS

SETTING:

12 HOURS

CHANGE CODE

- - - -

 TO SELECT LOCK MODE 

PRESS ACTION TO RETURN

ACTION

•Press then CH  to highlight HOW LONG?.

•Press VOL  to select 12 Hours, 24 Hours, 48 Hours or
ALWAYS.

Note: If GAME, CHANNEL or ALL is selected, and if a blocked

channel or video input is selected, the message
LOCKED displays in the upper left corner of the TV
screen.

 V-CHIP SET - V-Chip technology allows parents to use

the TV rating codes to block programs that they feel
are inappropriate for their children to watch. Split will
also be blocked automatically.

LOCK

LOCK SET

V-CHIP SET

HOW LONG?

CODE

PRESS ACTION FOR MAIN MENU

BLOCK PROGRAMS:
U.S. TV PROGRAMS 

CHANGE CODE

OFF

SETTING:

12 HOURS

- - - -

Procedure

•Press CH  to highlight Enter Code.

• Use the numeric keypad to enter your four digit code.

(Use a code that is easy to remember and record it in
a safe place.)

•Press CH  to highlight V-CHIP SET.

•Press  VOL or VOL  to select desired mode: U.S.
TV Programs, U.S. Movies, Canadian English or
Canadian French mode.

•Press CH  to highlight SETTING.

•Press  VOL or VOL  to display desired rating chart:
U.S. TV Programs, U.S. Movies, Canadian English or
Canadian French.

•Press VOL  to select ON or OFF.

•Press CH  to select VIEW NR PROGRAMS? for U.S.
TV Programs and U.S. Movies or VIEW E PROGRAMS
for Canadian English and Canadian French.

•Press VOL  to select YES or NO.

ENGLISH

21 z

ICON MENUS OPERATION

U.S TV Programs

This TV model features “V-Chip technology” which allows
you to use U.S. TV PROGRAMS Guide ratings to block
various types of TV programs. Split will also be blocked
automatically.

SETTING:

TV-Y
TV-Y7 FV
TV-G
TV-PG V S L D
TV-14

V S L D

TV-MA

V S L

LOCK

OFF

YES

BASIC



U. S. TV PROGRAMS

VIEW NR PROGRAMS?

- - - - - - - - - - - - - - - - - - - - -

PRESS ACTION TO RETURN

Note: By selecting “Yes”, NR programs will be received. By

selecting “NO”, NR programs will be blocked (See
Customer Caution on this page).

Procedure

ENGLISH

•Press CH  to select SETTING.

•Press VOL  to select BASIC or DETAILED.
BASIC - Allows you to select only general ratings such
as TV-Y, TV-PG, etc.
DETAILED - Allows you to select both general ratings
and content such as V, L, etc.

•Press CH  or CH  to move between different ratings.

•Use  VOL or VOL  to select ratings you want to
block (RED) and unblock (GREEN).

•Press to return to V-CHIP SET.

ACTION

•Press CH  to select HOW LONG?.

•Press  VOL or VOL  to select 12, 24, 48 hours or
ALWAYS.

•Press to return to Main Menu, then press CH 

ACTION

to exit.

Customer Caution

The V-Chip system that is used in this set is capable of blocking
“NR” programs (non rated, not applicable and none) as per
FCC Rules Section 15.120(e)(2). If the option of blocking “NR”
programs is chosen “unexpected and possibly confusing
results may occur, and you may not receive emergency
bulletins or any of the following types of programming:”

• Emergency Bulletins (Such as EAS messages,
weather warnings and others)

• Locally originated programming

•News

• Political

• Public Service Announcements

• Religious

•Sports

•Weather

NR Not Rated. SEE CUSTOMER CAUTION above.

All children. The themes and elements in this

TV-Y

program are specifically designed for a very young
audience, including children from ages 2-6.

Directed to older children. Themes and elements

TV-Y7

in this program may include mild physical or
comedic violence, or may frighten children under
the age of 7.

General audience. It contains little or no violence,

TV-G

no strong language, and little or no sexual dialogue
or situations.

Parental guidance suggested. The program may

TV-PG

contain infrequent coarse language, limited
violence, some suggestive sexual dialogue and
situations.

Parents strongly cautioned. This program may

TV-14

contain sophisticated themes, sexual content,
strong language and more intense violence.

Mature audiences only. This program may contain

TV-MA

mature themes, profane language, graphic violence,
and explicit sexual content.

FV FANTASY/CARTOON VIOLENCE

V VIOLENCE

SSEX

L OFFENSIVE LANGUAGE

D DIALOGUE WITH SEXUAL CONTENT

U.S. Movies

This TV model features “V-Chip technology” which allows
you to use Motion Picture Ratings when viewing movies or
video tapes. This innovation allows parents to block various
types of movies and video tapes at their discretion. Split will

U.S. TV Programs Ratings Chart Description

also be blocked automatically.

LOCK SET

V-CHIP SET

HOW LONG?

CODE

PRESS ACTION FOR MAIN MENU

Note: Some movies are not rated for a variety of reasons. Old

movies and foreign films are usually not rated.

VIEW NR PROGRAMS?

LOCK

BLOCK PROGRAMS:

U.S. MOVIES 

SETTING:

12 HOURS

CHANGE CODE

U.S. MOVIES

PRESS ACTION TO RETURN

LOCK



G
PG
PG-13
R
NC-17
X

OFF

OFF 

YES

- - - -

22 z

Procedure

•Press CH  or CH  to move between different ratings.

•Use  VOL or VOL  to select ratings you want to
block (RED) and unblock (GREEN).

ACTION

•Press to return to V-CHIP SET.

•Press CH  to select HOW LONG?.

U.S. Movies (cont.)

•Press  VOL or VOL  to select 12, 24, 48 hours or
ALWAYS.

•Press to return to Main Menu, then press CH 

ACTION

to exit.

U.S. Movies Ratings Chart Description

CONTAINS NO RATING (NOT RATED) AND NA

NR

G GENERAL AUDIENCES. All ages admitted.

PG

PG-13

R

NC-17 NO ONE 17 AND UNDER ADMITTED.

X ADULTS ONLY.

(NOT APPLICABLE) PROGRAMS. Movie has

not been rated or rating does not apply.

PARENTAL GUIDANCE SUGGESTED. Some
material may not be suitable for children.

PARENTS STRONGLY CAUTIONED. Some
material may be inappropriate for children under

13.
RESTRICTED. Under 17 requires accompanying

parent or adult guardian.

Canadian English

The V-CHIP used in this TV model allows you to block
various types of movies and television programs based on
the two ratings systems used in Canada. Split will also be
blocked automatically.

LOCK

LOCK SET

V-CHIP SET

HOW LONG?

CODE

PRESS ACTION FOR MAIN MENU

BLOCK PROGRAMS:
CANADIAN ENGLISH 

CHANGE CODE

OFF

SETTING:

12 HOURS

- - - -

Note: E (Exempt) programming includes: news, sports,

documentaries and other information programming, talk
shows, music videos, and variety programming.

C
C8+
G
PG
14+
18+

LOCK

OFF 

YES

CANADIAN ENGLISH

VIEW E PROGRAMS?

PRESS ACTION TO RETURN

Procedure

•Press CH  or CH  to move between different ratings.

•Use  VOL or VOL  to select ratings you want to
block (RED) and unblock (GREEN).

•Press twice to return to V-CHIP SET.

•Press CH  to select HOW LONG?.

•Press  VOL or VOL  to select 12, 24, 48 hours or

•Press to return to Main Menu, then press CH 

ACTION

ALWAYS.

ACTION

to exit.

ICON MENUS OPERATION

.

Canadian French

The V-CHIP used in this TV model also lets you block or
unblock Canadian French programs according to various
ratings categories. Split will also be blocked automatically.

Note: E (Exempt) programming includes: news, sports,

Procedure

•Press CH  or CH  to move between different ratings.

•Use  VOL or VOL  to select ratings you want to

•Press twice to return to V-CHIP SET.

•Press CH  to select HOW LONG?.

•Press  VOL or VOL  to select 12, 24, 48 hours or

•Press to return to Main Menu, then press CH 

Canadian English Ratings Description

Exempt - Exempt programming includes:

E

news, sports, documentaries and other
information programming, talk shows, music
videos, and variety programming.

Programming intended for children under age

c

8. No offensive language, nudity or sexual
content.

Programming generally considered

C8+

acceptable for children 8 years and over. No
profanity, nudity or sexual content.

G

PG

General programming, suitable for all
audiences.

Parental Guidance suggested. Some material
may not be suitable for children.

Programming contains themes or content
which may not be suitable for viewers under

14+

the age of 14. Parents are strongly cautioned
to exercise discretion in permitting viewing
by pre-teens and early teens.

18 ADULTS ONLY

LOCK

LOCK SET

V-CHIP SET

HOW LONG?

CODE

PRESS ACTION FOR MAIN MENU

BLOCK PROGRAMS:

CANADIAN FRENCH 

CHANGE CODE

OFF

SETTING:

12 HOURS

- - - -

documentaries and other information programming, talk
shows, music videos, and variety programming.

LOCK

CANADIAN FRENCH

VIEW E PROGRAMS?

G
8 ANS+
13ANS+
16ANS+
18ANS+

PRESS ACTION TO RETURN

OFF 

YES

block (RED) and unblock (GREEN).

ACTION

ALWAYS.

ACTION

to exit.

ENGLISH

23 z

ICON MENUS OPERATION

Canadian French (cont).

ENGLISH

Main and Split Blocking Message

If V-Chip is enabled and the program exceeds the rating
limit set by you, the blocking message will appear and the
audio will be muted. Enter your four-digit secret code if you
wish to continue viewing the program. After entering your
code, all locks and rating blocks are disabled until the TV is
turned off or until all settings are reprogrammed.

Note: If you enter your four-digit secret code to override rating

Note: To unlock split frame, press button,

Canadian French Ratings Description

E Exempt - Exempt programming.

General - Programming intended
for audience of all ages. Contains

G

no violence, or the violence
content is minimal or is depicted
appropriately.

8+ General - Not recommended for
young children. Programming

8 ans +

intended for a broad audience but
contains light or occasional
violence. Adult supervision
recommended.

Programming may not be suitable
for children under the age of 13 ­Contains either a few violent

13 ans +

scenes or one or more sufficiently
violent scenes to affect them.
Adult supervision strongly
suggested.

Programming may not be suitable

16 ans +

for children under the age of 16 ­Contains frequent scenes of
violence or intense violence.

Programming restricted to adults.

18 ans +

Contains constant violence or
scenes of extreme violence.

blocks, you must reset all rating blocks by either
reprogramming or turning the TV off.

Main Picture Split Frame

PROGRAM
RATING

PROGRAM RATING EXCEEDED

ACCESS CODE - - - -

SPLIT CTRL

will be displayed in split frame, then enter four-digit
secret code.

EXCEEDED

ACCESS
CODE

_ _ _ _

SET UP

 While the desired sub menu is highlighted, press VOL  to

ON MUTE

MODE

SET UP

ENGLISH

NO

OFF

SET UP

ENGLISH



NO

OFF

select or activate feature.

IDIOMA/
LANGUE

CC

ON MUTE

CC

MODE

OTHER ADJ.

PRESS ACTION FOR MAIN MENU

 IDIOMA/LANGUE - Select to change menu language

to ENGLISH, ESPAÑOL (Spanish) or FRANÇAIS
(French).

 ON MUTE - Activates the onscreen Closed

CC

Caption feature when the MUTE button on the remote
control is pressed. To deactivate press MUTE button
again.

IDIOMA/
LANGUE

CC

CC

OTHER ADJ.

PRESS ACTION FOR MAIN MENU

CC

 MODE - This television contains a built-in decoder

that displays (Closed Captioned) text across the

CC

screen (white or colored letters on black background).
It allows the viewer to read the dialogue of a television
program or other information. The program viewed
must include Closed Captioning for the feature to work.
Activate the onscreen Closed Caption feature by
selecting one of the following modes.

• OFF - When Closed Caption is not desired.

• C1 - For video related information to be displayed, up to
4 lines onscreen at a time. (It does not block relevant
parts of the picture). Text may be in any language.

• C2 to C4 - For other modes of video related information.

• T1 to T4 - For program guide and other information to be
displayed, when available. (Blocks a large portion of the
picture on the television screen).

Note: C1 mode is recommended for viewing Closed Captions.

24 z

SET UP (cont.)

 OTHER ADJ.

Highlight OTHER ADJ. and press VOL  to enter sub sub-
menu field.

Note: While sub sub-menu features are highlighted, press

VOL  to adjust or activate.

SET UP

MODE

AUTO PROGRAM
MANUAL PROGRAM

OTHER ADJ.

AUTO POWER ON
CHAN BANNER
GEOMAGNETIC CORR
PRESS  FOR MORE

PRESS ACTION TO RETURN

• MODE - To select TV (antenna) or CABLE mode
depending on the signal source.

• AUTO PROGRAM - To automatically program all
channels with a signal.

• MANUAL PROGRAM - To manually add or delete
channels.

• AUTO POWER ON - Select SET to power up the TV at
the same time as the Cable box or other components or
select OFF. When this feature is On, Timer functions will
be disabled.

• CHAN BANNER - Select ON to display onscreen banner
when changing channels.

• GEOMAGNETIC CORR - This feature is used to adjust
discoloration of the picture due to earth’s magnetic field
in the area.

Procedure

•Press VOL  to display adjustment menu.

•Press  VOL or VOL  to adjust discoloration in
picture.

SET UP

OTHER ADJ.

PRESS ACTION TO RETURN

MODE
AUTO PROGRAM
MANUAL PROGRAM
AUTO POWER ON
CHAN BANNER

GEOMAGNETIC CORR

PRESS  FOR MORE

CABLE

OFF




ON



• TILT CORRECTION - This feature is used to adjust the
tilt of the picture due to earth’s magnetic field in the area.

Procedure

•Press VOL  to display adjustment menu.

•Press  VOL or VOL  to adjust picture tilt.



CABLE




OFF

ON



GEOMAGNETIC CORRECTION

- - - - - - - - - - - - - - - - - -

0

l

J

TO ADJUST

PRESS ACTION TO EXIT

K

ICON MENUS OPERATION

• IMAGE SHIFT - This feature prevents the image
retention associated with viewing a fixed image for a
long period of time. When this feature is selected (ON),
the image is shifted up/down, left/right in small
increments at turn ON, when changing channels or when
the fixed image is left On for a long time. Selecting ON is
recommended for this feature.

ENGLISH

PRESS

 FOR MORE

TILT CORRECTION

IMAGE SHIFT OFF

OTHER ADJ.

ON RECOMMENDED

PRESS ACTION TO RETURN

SET UP



TILT CORRECTION



0

J

TO ADJUST
PRESS ACTION
TO EXIT

K

25 z

TROUBLESHOOTING CHART

Troubleshooting Chart

Before calling for service, determine the symptoms and follow suggested solutions.

AUDIO VIDEO Solutions

Noisy Audio

Noisy Audio

ENGLISH

Noisy Audio

No Audio

Noisy Audio

No Audio

Snowy Video

Multiple Image /

Color shift in picture

Interference

Normal Video

No Video with Snow

?

No Video / No Split

Adjust antenna location and connection

Adjust antenna location and connection
Check antenna lead-in wire

Move television away from electrical appliances, lights,
vehicles and medical equipment

Increase Volume
Check Mute
Check television SPEAKERS on/off
Change Channel

Set TV or Cable Mode Properly
Check Antenna Cables

Check if Power Cord is Plugged into Active Outlet
Adjust Brightness and Audio Controls
Change Channel
Check Cable Connections
Program the Remote Control Again
Check Second Video Source Operation
Make sure that a PC is not connected to HDMI input.

Picture shifts slightly (horizontally or

Normal Audio

Normal Audio

Wrong Audio

Normal Audio

Normal Audio

Intermittent Remote Control Operation

No effect when pressing TV front control panel keys

vertically) when turned on, changing

channels or within a duration of two

(2) hours of viewing.

No Color

Normal Video

Black Box on Screen

Normal Video

This is a normal condition to prevent image burn-in. This feature can be
turned off. However, turning off this feature may result in image
retention on screen. (refer pg. 25)

Confirm that cables are in the correct jacks
Adjust Color Settings
Change Channel
Check for broken pins on S-Video cable

Check if Audio Is Set To Stereo or Mono, Not SAP

Change CC (Closed Captioning) from Text Mode

Replace Remote Control Batteries

Control panel may be locked. Press ACTION and TV/VIDEO buttons
on the TV front simultaneously, then quickly press ACTION and

 VOL buttons simultaneously.

26 z

Index

INDEX

Numerics

3D Y/C Filter 19

A

AC Power Supply Cord 5
AI Sound 19
Amplifier Connection 8
Antenna Connection 5
ASPECT Button 10
Audio 19
Auto Power On 25
Auto Program 6, 25

B

Balance 19
Basic Menu Navigation 18
Bass 19
BBE 19
BBE Button 10
Brightness 19

C

Cable / Antenna Connection 5
Cable Box Connection 7
Cable Connection 5
Canadian English 23
Canadian English Ratings
Description 23
Canadian French 23, 24
Canadian French Ratings
Description 24
Care and Cleaning 4
CC Mode 24
CC On Mute 24
Chan Banner 25
Channel Scan 20
Channels 20
Cinema 19
Clock Set 21
Codes For Cable Box 16
Codes For Cassette Decks 17
Codes For CD Player 17
Codes For DBS 16
Codes For DVD 16
Codes For Personal Video
Recorders 17
Codes For Receivers 17
Codes For VCR 16
Color 19
Color Matrix 19
Color Temp 19
Compatible Formats 9
Component Codes 15, 16, 17
Create Code First 21
Customer Record 4

D

Digital TV - Set-Top Box (DTV-STB) or
DVD Connection 8
Direct Video Input Selection 11

F

Favorites 20
FCC Information 2
Feature Chart 4
Freeze Button 11
Front Control Panel 8

G

Geomagnetic Corr 25
Geomagnetic Correction 6

H

HDMI (High Definition Multimedia

Interface) input connection 9

HDMI IN 20

I

Icon Menus Operation 19
Idioma/langue 6, 24
Image Shift 25
Important Information 1
Initial Set Up Menu 6
Input Label 20
Input Label Chart 20
Installation 5

L

Lock 21
Lock Set 21

M

Main and Split Blocking Message 24
Main Picture Freeze Feature 11
Manual Program 25
Mode 6, 19, 25
Mono 19
MPEG NR 19

N

Natural Color 19
Normal 19

O

Operating a Cable Box 14
Operating a cassette deck 14
Operating a CD 13
Operating a DBS 13
Operating a DTV 14
Operating a DVD 13
Operating a PVR (Personal Video

Recorder) 14
Operating a Receiver 14
Operating a VCR 13
Operating Components with Remote

Control 13
Optional Cable Connections 5
Optional Equipment Connections 7
Other Adj. 19, 20, 25

P

PIC Mode 19
Picture 19

Preset Caption 20
Program Out Connection 9
Programming The Remote Control 15
Programming Without A Code 15

R

Remote Control Battery Installation 5
Remote Control Operation 12

S

SAP 19
SAP Button 10
Screen 4
Search Button 11
Set Up 24
Sharpness 19
Sleep 21
Speakers 20
Special Features 10
Specifications 4
Split CTRL Button 11
Split Operation 10
Split Operation With a Cable Box 10
Split Operational Buttons 11
Standard 19
Stereo 19
Surround 19

T

Table of Contents 3
Television Location 5
Tilt Correction 6, 25
Timer 21
Timer 1 And Timer 2 21
Tint 19
Treble 19
Troubleshooting Chart 26
TV/Video Button 11

U

U.S TV Programs 22
U.S. Movies 22
U.S. Movies Ratings Chart

Description 23

U.S. TV Programs Ratings Chart

Description 22

V

V-Chip Set 21
VCR and Cable Box Connection 7
VCR Connection 7
Video NR 19
Vivid 19
VM (Velocity Modulation) 19

ENGLISH

27 z