Panasonic CT-20D12D, CT 20G7D, CT 32G7D, CT 27G7D, CT-27G7DU User Manual

Color Television
Operating Instructions

®

CT-20D12D
CT-20G7D

CT-27G7D
CT-27G7DU
CT-27G7SD

CT-27G7SDU
CT-32G7D
CT-32G7DU

For assistance, please call: 1-800-211-PANA (7262) or
send e-mail to: [e-mail] (USA only)

TQB2AA0431-2 22603
PRINTED IN USA

WARNING

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WA RNIN G: To reduce the risk of electric shock do not remove cover or back.

No user-serviceable par ts i nside. Refer se rvicing t o qual ifie d servi ce per sonnel.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO

FCC CAUTION:

ENVIRONMENTAL NOTICE:

The lightning f lash with arrow
head within a triangle is
intended to tell the user that
parts inside the product are a
risk of electric shock to
persons.

The exclamation p oint within a
triangle is intended to tell the
user that important operating
and servicing instructions are
in the papers with the
appliance.

NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

The double insulation symbol (a square within a square) is
intended to alert qualified service personnel to use only
identical replacement parts in this apparatus.

ANY CHANGES OR MODIFICATIONS TO THIS TV
RECEIVER NOT EXPRESSLY APPROVED BY
MATSUSHITA ELECTRIC CORPORATION OF AMERICA
COULD CAUSE HARMFUL INTERFERENCE, WHICH

WOULD VOID THE USER’S AUTHORITY TO OPERATE
THIS EQUIPMENT.

THIS PRODUCT UTILIZES BOTH A CATHODE RAY TUBE (CRT) AND
OTHER COMPONENTS THAT CONTAIN LEAD. DISPOSAL OF THESE
MATERIALS MAY BE REGULATED IN YOUR COMMUNITY DUE TO
ENVIRONMENTAL CONSIDERATIONS. FOR DISPOSAL OR RECYCLING
INFORMATION PLEASE CONTACT YOUR LOCAL AUTHORITIES, OR THE
ELECTRONICS INDUSTRIES ALLIANCE: <HTTP://WWW.EIAE.ORG.>

Table of Contents

Congratulations.........................................................2

Customer Record ......................................................................2

Care and Cleaning.................. ....... ...... ....... ...... ...... ....... ...... ......2

Specifications ................................ ...... ......................................2

Installation..................................................................3

Television Location....................................................................3

Optional Cable Connections......................................................3

AC Power Supply Cord..............................................................3

Cable / Antenna Connection......................................................3

Feature Comparison Chart .......................................4

Auto Set Up Menu......................................................5

Optional Equipment Connections ...........................6

VCR...........................................................................................6

Amplifier (TO AUDIO AMP) ......................................................6

Front Control Panel...................................................7

Remote Control Operation (models CT-20G7D,

CT-27G7D, CT-27G7SD and CT-32G7D only)

Remote Control Operation

(for model CT-20D12D only) ......................................... 9

Mode Operational Key Chart ..................................................10

Programming the Remote .......................................................12

Programming With a Code ......................................................12

Programming Without a Code.................................................12

Component Codes.................. ....... ..........................................13

Icon Menu Navigation .............................................15

Main Menu Icons......................................................16

Icon Menus..............................................................................16

Icon Menu Operation...............................................17

Set Up......................................................................................17

Picture .....................................................................................18

Timer .......................................................................................19

Audio .......................................................................................20

Channels .................................................................................21

Lock.........................................................................................21

V-Chip Menu Operation...........................................22

U.S. TV Programs ...................................................................22

U.S. Movies.............................................................................24

Rating Systems for Canada.....................................................25

FM Radio Operation (for model CT-20D12D only) ........27

Troubleshooting Chart............................................28

Limited Warranty.....................................................29

Customer Services Directory.................................31

Limited Warranty (Canada)..................................... 32

Index .........................................................................33

....................8

T

ABLE OF CONTENTS

Read these instructions completely before operating television.
Contents are subject to change without notice or obligation.

Copyright 2002 by Matsushita Electric Corporation of America. All rights reserved.
Unauthorized copying and distribution is a violation of law.

1 l

C

ONGRATULATIONS

Congratulations

Your new TV Monito r/Rece iver featur es a so lid state ch assi s that is desi gned to gi ve you many y ears of enj oymen t. It was
thoroughly tested and tuned at the factory for best performance.

Customer Record

The model and serial number of this product are located on the back of the television. You should note the model and serial
number in the space provided and retain as a permanent record of your purchase. This will aid in identification in the event
of theft or loss. Product registration for U.S. customers is available at www.prodreg.com/panasonic.

Model
Number

Serial
Number

Care and Cleaning

Screen (Turn TV Off)

• Use a mild soap solution or window cleaner with a soft clean cloth. DO NOT USE ABRASIVE CLEANERS.

• Avoid excessive moisture and wipe dry.

Note: Do not spray any type of cleaning fluid directly on the screen.

Cabinet and Remote Control

r For cabinets and remote control, use a soft cloth dampened with water or a mild detergent solution. Avoid excessive moisture and

wipe dry.

r Do not use benzene, thinner or other petroleum based products.

Specifications

Power Source

CT-20D12D (1.4A)
CT-20G7D (1.4A)
CT-27G7D (1.8A)
CT-27G7DU (1.8A)
CT-27G7SD (1.8A)
CT-27G7SDU (1.8A)
CT-32G7D (1.8A)
CT-32G7DU (1.8A)

Channel Capability - 181 VHF-12; UHF-56; Cable-113

Video Input Jacks 1Vp-p, 75 Ohm, Phono Jack Type
Audio Input Jacks 500mV RMS 47K Ohm

Audio Output Jacks

(some models)

S-Video Input Jacks

(some models)

Specifications are subject to change without notice or obligation.

120V AC, 60Hz

0-2.0V RMS 4.7K Ohm

S-Video (Y-C) Connector

2 l

I

NSTALLATION

Installation

Television Location

Follow these recommendations before deciding the location of your television.

r Avoid excessiv e sunlight or bright lights, including reflections.
r Keep away from excessive heat or moisture. Inadequate ventilation may cause internal component failure.
r Fluorescent lighting may reduce remote control transmitting range.
r Keep away from magnetic equipment, including motors, fans and external speakers.

CAUTION: Use this television receiver only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or
sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from
tip-over. In order to avoid injury to children, never place your television receiver on a piece of furniture that is capable of
being tilted by a child leaning on it, pulling on it, standing on it, or climbing on it.

CT-27G7D, CT-27G7DU:

CAUTION:
other carts (or stands) is capable of resulting in instability causing possible injury.

CT-27G7SD, CT-27G7SDU:

CAUTION:
other carts (or stands) is capable of resulting in instability causing possible injury.

CT-32G7D, CT-32G7DU:

CAUTION: These television receivers for use only with PANASONIC TY-32G22M (TY-32G22M-PC for Canada) stand. Use with
other carts (or stands) is capable of resulting in instability causing possible injury.

These television receivers for use only with PANASONIC TY-27G22M (TY-27G22M-PC for Canada) stand. Use with

These television receivers for use only with PANASONIC TY-27G22M (TY-27G22M-PC for Canada) stand. Use with

Optional Cable Connections

Shielded audio and video cables should be used between components. For best results:

r Use 75-ohm coaxial shielded cables.
r Use appropriate input and output connectors that match your component connectors.
r Avoid long cables to minimize interference.

AC Power Supply Cord

CAUTION: TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE OF PLUG TO WIDE SLOT OF AC OUTLET

AND FULLY INSERT. DO NOT USE A PLUG WITH A RECEPTACLE OR OTHER OUTLET UNLESS THE BLADE
CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.

PROTECT POWER CORDS FROM BEING WALKED ON, ROLLED OVER, CRIMPED, BENT OR PINCHED,
PARTICULARLY AT PLUGS, CONVENIENCE RECEPTACLES, AND THE POINT WHERE THEY EXIT FROM THE APPARATUS.

Polarized plug

Cable / Antenna Connection

For proper reception, either a cable or antenna connection is required.

Cable Connection

Connect the cable supplied by your local cable company.

Note: A cable conv erter box m ay be requ ired for p roper rece ption. Chec k with you r local ca ble company for

compatibility requirem ents.

Antenna Connection

• For proper reception of VHF/UHF channels, an external antenna is required. For best reception, an
outdoor antenna is recommended.

Note: Cable Mode is preset at the factory. Antenna users must change to TV mode in the Set Up Menu under

Prog Chan.

Incoming Cable from

Cable Company

75 Ohm VHF/UHF

on back of TV

Incoming Cable from

Home Antenna

3 l

F

EATURE COMPARISON CHART

Feature Comparison Chart

FEATURES

MODELS

CT-20D12D

CT-20G7D

CT-27G7D

CT-27G7SD

Features

MENU LANGUAGE

ENG/SPAN/FR

CLOSED CAPTIONING

V-CHIP CAPABILITY

75 OHM INPUT

VIDEO NORM

FM RADIO

STEREO

AI SOUND

NUMBER OF SPEAKERS 2 2 2 2 2

A/V IN

(REAR/FRONT)

AUDIO OUT

r r r r r

r r r r r

r r r r r

r r r r r

r r r r r

r

r r r r r

r r r r r

1

(1/1)1(1/1)1(1/1)1(1/1)1 (1/0)

r

CT-32G7D

S-VHS INPUT

r r r r

A/V JACKS AUDIO SPECIAL

HEADPHONE JACK

IMPORTANT INFORMATION REGARDING THE USE OF VIDEO GAMES, COMPUTERS, OR
OTHER FIXED IMAGE DISPLAYS.

WARNING: The marking or retained image on the picture tube resulting from viewing fixed
image is not an operating defect and as such is not covered by Warranty.

This television is designed to display constantly moving imag es on the s creen. Con tinuous v iewing
of stationary images such as letterbox pictures on standard screen TVs (with top/bottom bars), non­expanded standard (4:3) pictu res on wide screen TVs (with side bars s hown on each side of an
image), stock mark et report ba rs (ticker running at the bott om of the scr een), vid eo game patterns ,
fixed scoreboards, bright station logos, on-line (internet) or repetitive computer style patterns should
be limited.

The extended use of fi xed image program mat erial can cause a perm anent picture tube dam age,

shown as a “shadow im age” viewable on normal program s. This type of irreversible pic ture tube
deterioration can be limited by performing the following steps:

• Do not display the fixed image for extended periods of time.

• Turn the power off when not in use.

r r r r

4 l

A

VOL

VOL

VOL

UTO SET UP MENU

Auto Set Up Menu

For your convenience, Auto Set up menu will be displayed on screen when the set is turned on for the first time. If needed,
follow the menus and procedures for setting up the features.

r IDIOMA/LANGUE - To change menu language to ENGLISH, SPANISH or FRENCH.

FIRST PLEASE

CONNECT THE ANTENNA

IDIOMA/LANGUE ENGLISH

AUTO PROGRAM

AUTO SET UP

PRESS ACTION TO EXIT

u

CABLEMODE

u

u

r MODE - To select TV (antenna) or CABLE mode depending on the signal source.

FIRST PLEASE

CONNECT THE ANTENNA

IDIOMA/LANGUE ENGLISH

AUTO PROGRAM

AUTO SET UP

PRESS ACTION TO EXIT

u

CABLEMODE

u

u

Press to select English, Spanish or French.

Press to select TV or CABLE.

r AUTO PROGRAM - To automatically program all channels with a signal.

FIRST PLEASE

CONNECT THE ANTENNA

IDIOMA/LANGUE ENGLISH

AUTO SET UP

CABLEMODE

AUTO PROGRAM

PRESS ACTION TO EXIT

u

u

u

Press to start Auto Programming.

5 l

O

PTIONAL EQUIPMENT CONNECTIONS

Optional Equipment Connections

VCR Connection

Follow this diagram when connecting your television to a VCR only.

VCR

PLAY

R

FF
E
W

STOP

VIDEO OUT

AUDIO OUT

ANT OUT

L

R

ANT IN

In coming Cable

ANT

CABLES NOT INCLUDED

TERMINALS ON BACK OF TV

TO AUDIO

S-VIDEO

AMP

AUDIO

RL

VIDEO

Note: The remote control must be programmed with the supplied codes to operate the VCR.

Amplifier Connection (TO AUDIO AMP)

(CT-20D12D only)

To listen through a separate stereo system, connect an external audio amplifier TO AUDIO AMP outputs on back of
television.

Note: TO AUDIO AMP terminals cannot be connected directly to external speakers.

Audio Adjustments

1. Select SPEAKERS ON located in the onscreen AUDIO menu.

2. Set amplifier volume to minimum.

3. Adjust television volume to desired level.

4. Adjust amplifier volume to match the television.

5. Select SPEAKERS OFF & VARIABLE AUDIO OUT from AUDIO menu.

6. Volume, mute, bass, treble and balance are now controlled through the television.

Select SPEAKERS OFF & FIXED AUDIO OUT to control audio functions through the external amplifier.

EXTERNAL AMPLIFIER

6 l

S-VIDEO

AUDIO

TO AUDIO

RL

AMP

VIDEO

TERMINALS ON BACK OF TV

F

RONT CONTROL PANEL

Front Control Panel

Use the front panel of the televis ion to use the TV withou t remote or to use the Aud io/Video input jack s (some mod els) for
optional equipment.

TV/VIDEO

Press to select VIDEO input mode.

Note: The front control panel can be used to access menus and switch video mode when the remote control is not available.

FRONT A/V JACKS

VIDEO L - AUDIO - R

HPJ

Jacks used for 1/8”
headphone plug.

CAMCORDER

A second VCR, a video disc player, video game equipment and DSS equipment can also be connected to the video inputs.
See the optional equipment manual for details.

Procedure

1. Connect equipment to front or rear Audio/Video input jacks.

Note: Front and rear Audio/Video connections cannot be operated at the same time.

2. Operate optional equipment as instructed in equipment manual.

7 l

R

EMOTE CONTROL OPERATION

Remote Control Operation

(For models CT-20G7D, CT-27G7D, CT-27G7SD and CT-32G7D only)

POWER

Press to turn ON and OFF.

VOL

Press to adjust TV sound and navigate in
menus.

“0” ~ “9”

Press numeric keypad to select any channel.

R-TUNE

Press to switch to previously viewed
channel or video mode.

MUTE

Press to mute sound. Press to display and
cancel (CC) Closed Caption.

CH

Press to select next or previous channel and
navigate in menus.

ACTION

Press to access menus.

TV/VIDEO

Press to select TV orVideo mode.

RECALL

Press to display time, channel, sleep timer,
and other options.

Battery Installation

Use two AA batteries:

Remove battery cover by pushing in and up near arrow.
Install batteries matching (+) and (-) polarity signs.
Replace the battery cover.

Note:

8 l

Incorrect installation can cause battery leakage and
corrosion that will damage the Remote Control

EUR501450

Precautions

• Replace batteries in pai r s.

• Do not mix battery types (zinc carbon
with alkaline).

• Do not recharge, heat, short-circuit,
disassemble, or burn batteries.

Remote Control Operation

T

V

V

C

R

D

B

S

/

C

B

L

D

V

D

7

4

1 2

5
8
0

9

6

3

(For model CT-20D12 only.)

R

EMOTE CONTROL OPERATION

POWER

POWER

Press to turn ON and OFF.

Press to select remote operation.

ACTION

Press to access menus.

TV/VIDEO

Press to select TV, Video mode or FM mode.

MUTE

Press to mute sound. Press to display and
cancel CC (Closed Caption)..

*LIGHT

Press to illuminate remote buttons.

VOL VOL

Press to adjust TV sound and navigate in
menus.

CH
CH

Press to select next or previous channel and
navigate in menus.

EXIT

DBS functions button.

GUIDE

DBS functions button.

Press numeric keypad to select any channel.

R-TUNE

Press to switch to previously viewed
channel or video mode.

Battery Installation

Use two AA batteries:

Remove battery cover by pushing in and up near arrow.
Install batteries matching (+) and (-) polarity signs.
Replace the battery cover.

Note:

Incorrect installation can cause battery leakage and
corrosion that will damage the Remote Control

EUR511502

RECALL

Press to display time, channel, sleep timer,
and other options.

REW

TV/VCR

REC

Component function butto ns

PLAY

u

STOP

VCR /DBS CH

Precautions

• Replace batteries in pai r s.

• Do not mix battery types (zinc carbon
with alkaline).

• Do not recharge, heat, short-circuit,
disassemble, or burn batteries.

*To prolong the life for the batteries, turn the li ght
off and on by pressing R-TUNE and RECALL
buttons, simultaneously.

FF

PAUSE

9 l

R

EMOTE CONTROL OPERATION

Mode Operational Key Chart

This chart defines the keys that are ope re ati onal in the sel ec ted component modes (TV, VCR, DBS, CABLE or DVD) after
programming (if needed).

POWER
MUTE
TV/VIDEO
CHAN UP
CHAN DOWN
VOL RIGHT
VOL LEFT
ACTION
RECALL
EXIT
GUIDE
1
2
3
4
5
6
7
8
9
0

R-TUNE
<<REW

PLAY
>>FF
PAUSE
STOP
RECORD
TV/VCR
VCR/DBSCHAN

VCR/DBS CHAN

LIGHT

KEY NAME

TV MODE CABLE MODE DBS MODE

POWER POWER POWER
MUTE CBL MUTE TV MUTE
INPUT SWITCH TV INPUT SWITCH TV INPUT SWITCH
CHANNEL UP CABLE CHANNEL UP DBS NAVIGATION UP
CHANNEL DOWN CABLE CHANNEL DOWN DBS NAVIGATION DOWN
VOL + TV VOL + DBS NAVIGATION RIGHT
VOL - TV VOL - DBS NAVIGATION LEFT
ACTION ENTER DBS MENU
DISPLAY TV DISPLAY DBS PROG. INFO

- - DBS EXIT

- - DBS GUIDE
DIGIT 1 DIGIT 1 DIGIT 1
DIGIT 2 DIGIT 2 DIGIT 2
DIGIT 3 DIGIT 3 DIGIT 3
DIGIT 4 DIGIT 4 DIGIT 4
DIGIT 5 DIGIT 5 DIGIT 5
DIGIT 6 DIGIT 6 DIGIT 6
DIGIT 7 DIGIT 7 DIGIT 7
DIGIT 8 DIGIT 8 DIGIT 8
DIGIT 9 DIGIT 9 DIGIT 9
DIGIT 0 DIGIT 0 DIGIT 0
PREVIOUS CHAN

OR VIDEO MODE

- - -

- - -

- - -

- - -

- - -

- - -

- - -

- -

- - DBS CHANNEL UP

CABLE PREVIOUS

CHANNEL

-REMOTE BUTTONS

-

PREVIOUS DBS CHANNEL

DBS CHANNEL DOWN

10 l

Mode Operational Key Chart (cont’d)

KEY NAME

POWER
MUTE
TV/VIDEO
ACTION
CHAN UP
CHAN DOWN
VOL RIGH T
VOL LEFT

RECALL
EXIT

GUIDE
1
2
3
4
5
6
7
8
9
0
R-TUNE
<<REW
PLAY

>>FF
PAUSE

STOP
RECORD
TV/VCR
VCR/DBS
CHAN

VCR/DBS
CHAN

LIGHT

VCR

MODE

POWER POWER

TV MUTE TV MUTE

TV INPUT SWITCH TV INPUT SWITCH

- SELECT

- NEXT CHAPTER

- PREVIOUS CHAPTER

TV VOLUME + NAVIGATION RIGHT

TV VOLUME - NAVIGATION LEFT

ONSCREEN VCR

DISPLAY

- -

- -

- -

- -

- -

- -

- -

- -

- -

- -

- -

- -

- -

VCR REWIND SKIP SEARCH <<

VCR PLAY DVD PLAY

VCR FF

VCR PAUSE DVD PAUSE

VCR STOP DVD STOP

VCR RECORD -

TV/VCR SWITCH OPEN/CLOSE

VCR CHANNEL

DOWN

VCR CHANNEL UP SLOW +

DVD MODE

DVD MODEE

DVD DISPLAY

SKIP SEARCH

SLOW -

REMOTE BUTTONS

FF>>

R

EMOTE CONTROL OPERATION

11 l

R

EMOTE CONTROL OPERATION

Programming The Remote

The Universal Remote Control ca n be programmed to operate many manufacturers’ co mponents, using the component
function buttons for VCR, DVD, CABLE or DBS. Follow the procedures for programming your Remote Control with or
without a code for the component.

Default Modes For Remote Control

Device Operates Default

TV TV (Panasonic Only) Panasonic TV Codes
VCR VCR (Preset) Panasonic VCR Codes
DBS DBS (Preset) Panasonic DBS Codes
CABLE CABLE (Preset) Panasonic DBS Codes
DVD DVD (Preset) Panasonic DVD Codes

Determine the manufacturer of the component and look in the table for the code.

Programming With a Code

Procedure

• Confirm that the external component is plugged in and operating.

• Turn the component off.

• Press and together, for at least 5 seconds.

ACTION

• Press appropriate component button on the Remote Control VCR, DVD, CABLE or DBS.

• Enter the 3-digit component code using the Remote Control numeric keypad (0 ~ 9 buttons).

• Press the Remote Control to test the component. If the procedure was successful, the component will turn on.

POWER

POWER

Helpful Hints: Unsuccessful Code

If the component does not operate with the Remote Control, repeat
the procedure using another code. (Some brands have multiple
codes).
If an incorrect code is entered, or if the procedure takes longer than
30 seconds, the programming will fail.

Programming Without A Code

This procedure searches all codes and is called the “sequence method.”

• Confirm that the external component is plugged in and on.

• Turn the component off.

• Press and together, for at least 5 seconds.

• Press appropriate component button on the Remote Control.

• Press to move forward to the next code. Press to move backward.

• Press the Remote Control to test the component. If the procedure was successful, the component will turn on.

ACTION

VOL

Note: Repeat the above steps until the component code is found. It may take many attempts before the correct code

is found.

• After the code is found, press to store the code.

POWER

VOL

POWER

ACTION

12 l

R

EMOTE CONTROL OPERATION

Component Codes

The Universal Remo te Control i s capable of operating many component brands after ent ering a c ode. Som e components
may not operate because t he codes are not available due to limited memory. The Universa l Remote Control does not
control all features found in each model.

Write the code numbers from tables in this space. This will serve as a reference if you need
to program your Remote Control.

VCR

DVD

DBS

CABLE

Codes For VCR

Brand Code

Admiral
Aiwa 127, 132
Akai 114, 115, 116, 129
Audio Dynamic 111, 139
Bell & Howell 105, 113
Broksonic 120, 126
Canon 123, 125
Citizen 106
Craig 105, 106, 129
Curtis Mathes 124, 127, 145
Daewoo 175, 124, 143
DBX 110, 111, 139
Dimensia 145
Emerson 103, 119, 120, 125, 126, 143
Fisher 105, 107, 108, 109, 113
Funai 120, 126, 134
GE 124, 133,145
Goldstar 106
Gradiente 134
Hitachi 100, 123, 145
Instant Replay 123, 124
Jensen 139
JVC 110, 111, 134,139
Kenwood 306, 310, 311, 339
LXI 100, 105, 106,107, 108, 109
Magnavox 123, 124, 131
Marantz 110, 111, 139
Marta 106
Memorex 109, 124
MGA 138, 140, 141, 147,148
Minolta 100,145
Mitsubishi 138, 140, 141, 147, 148
Multitech 104, 147
NEC 110,1 11, 134, 139
Olympic 123, 124
Optimus 106, 121, 128, 135

135

Brand Code

Orion 120, 126
Panasonic 121,122, 123, 124
J.C. Penney 100,105, 110, 111, 124, 139, 145
Pentax 100,111, 145
Philco 120, 123, 124, 126, 131, 143
Philips 123, 124, 131
Pioneer 123

Proscan
Quasar 121, 122, 123, 124

Radio Shack 105, 109, 124, 133, 136, 140
RCA
Realistic 105, 109, 124, 136, 140

Samsung 102, 104, 133
Sansui 120, 126, 139, 152
Sanyo 105, 109, 113

Scott
Sears 100, 105, 106, 107, 108

Sharp 135, 136
Shintom 117
Signature 2000 135
Singer 117
Sony 128, 129, 130
Sylvania 123, 124, 131
Tashiro 106
Tatung 110, 111, 139
Teac 1 10, 111, 139
Technics 121, 122, 123, 124
Teknika 124
Toshiba 101, 146
Vector Research 111
Wards 106, 109, 135, 136, 144
Yamaha 105, 110, 111, 139
Zenith 106,144

100, 101, 102, 123, 124, 131, 133,
145, 146

100, 101,102, 123, 124, 131, 133,
145, 146

101, 102, 104, 109, 120, 126, 138,
140, 147, 148

13 l

R

EMOTE CONTROL OPERATION

Component Codes (cont’d.)

Codes for Cable Box

Brand Code

ABC 224
Archer 225, 232
Cableview 205, 232
Citizen 205, 222
Curtis 212, 213
Diamond 224, 225, 232
Eagle 229
Eastern 234
GC Brand 205,232
Gemini 222
General

Instrument/
Jerrold

Hamlin 212, 218, 240, 241, 242, 245
Hitachi 203, 224
Macom 203, 204, 205
Magnavox 133
Memorex 230
Movietime 205, 232
Oak 202, 237,239
Panasonic 209, 210, 214
Philips 206, 207, 228, 229, 230
Pioneer 201, 216

Pulsar 205, 232

211, 219, 220, 221, 222, 223, 224,
225, 226, 227

Brand Code

Puser
RCA 215
Realistic 232
Regal 212, 218, 240, 241, 242, 245
Regency 234
Rembrandt 205, 232, 237
Samsung 205
Scientific Atlanta 211, 212, 213
Slmark 201, 205
Sprucer 205, 210
Stargate 205, 232
Teleview 201, 205
Texscan 244
Tocom 235
Toshiba 204
Unika 225, 232
Universal 222, 232
Videoway 206
Viewstar 229, 230
Zenith 200, 217
Zenith / Drake

Satellite

232

200

Brand Code

Denon 100
Ferguson 101
JVC 109
Mitsubishi 105
Nordmende 101
Panasonic 100
Philips 103
Pioneer 102
RCA 101

Brand Code

Dish Network
(Echostar)

Echo Star 105
Express VU 105, 115
G.E. 106
G.I. (General

Instrument)
Gradiente 114
Hitachi 103, 111, 112
HNS (Hughes) 103

105, 115, 116

108

Codes for DVD

Codes for DBS

Brand Code

Saba
Samsung 110
Sharp 108
Sony 104
Technics 100
Thomson 101
Toshiba 103

101

Yamaha 100
Zenith 107

Brand Code

Panasonic
Philips 101, 102
Primestar 108
Proscan 106, 109, 110, 113
RCA 106, 109, 110, 113
Sony 107
Star Choice 103, 108
Thoshiba 100
Uniden 101, 102

104

14 l

Icon Menu Navigation

Press to display the Icons.

Press to select desired icon.

Press to display selected

Icon features.

I

CON MENU NAVIGATION

15 l

M

AIN MENU ICONS

Main Menu Icons

Icon Menus

These charts list all menus under each Icon and which pages to refer to for menus description.

Note: *Menus may vary depending on model.

IDIOMA/LANGUE

r

MODE - (ENGLISH, FRANÇAIS, ESPAÑOL)

PROG CHAN

r

MODE - (TV or CABLE)

r

AUTO PROGRAM

r

MANUAL PROGRAM

Note: The following features will appear for

r
r

models with FM radio when in FM mode.

*FM ANTENNA
*FM PROGRAM

CC (CLOSED CAPTIONED)

r

CC MODE

OTHER ADJ.

r

AUTO POWER

CLOCK SET

r

TIME

SLEEP

r

HOW LONG?

TIMER

r

DAY

r

ON TIME

r

OFF TIME

r

ENTER CHANNEL

r

SET

REFER

TO

PAGE

17

17

27

18

18

REFER

TO

PAGE

19

19

19

AUDIO ADJ.

r

OTHER ADJ.

r

*SPEAKERS

r
r
r

VIDEO ADJ

r

COLOR, TINT, BRIGHTNESS, PICTURE,
SHARPNESS OR NORMAL

MODE (STEREO, SAP or MONO)

AI SOUND

ON
OFF & VARIABLE AUDIO OUT
OFF & FIXED AUDIO OUT

REFER

TO

PAGE

20

20

20

REFER

TO

PAGE

18

CAPTION

r

MANUAL CAPTION

16 l

REFER

TO

PAGE

21

MODE

r

LOCK SET - (OFF or GAME)

r

BLOCK PROGRAM

r

HOW LONG?

V-CHIP OPERATION 22

REFER

TO

PAGE

21

I

VOL

VOL

VOL

CON MENU OPERATION

Icon Menu Operation

SET UP

Note: Refer to page 15 for Icon Menu Navigation procedures.

IDIOMA/LANGUE (Menu Languages)

In SET UP Menu, select IDIOMA /LANG UE to c hange menu l anguag e to ENGL ISH, ES PAÑOL (Spanish) or FRANÇAIS
(French).

SETUP

IDIOMA/
LANGUE

PROG CHAN

CC

OTHER ADJ.

MODE ENGLISH

Prog Chan (Program Channels)

In SET UP menu under PROG CHAN select:

r MODE - To select TV (antenna) or CABLE mode depending on the signal source.

SETUP

IDIOMA/

LANGUE

PROG CHAN

CC

OTHER ADJ.

MODE

AUTO PROGRAM
MANUAL PROGRAM

CABLE

u
u

u

u

Press to select English, Spanish or French.

Press to select TV or CABLE.

r AUTO PROGRAM - To automatically program all channels with a signal.

SETUP

IDIOMA/

LANGUE

PROG CHAN

CC

OTHER ADJ.

MODE

AUTO PROGRAM

MANUAL PROGRAM

CABLE

u

u
u

Press to start AUTO PROGRAM.

r MANUAL PROGRAM - To manually add or delete channels.

SETUP

IDIOMA/

LANGUE

PROG CHAN

CC

OTHER ADJ.

MODE
AUTO PROGRAM

MANUAL PROGRAM

CABLE

u
u

u

Press

VOL

to display next menu.

Note: Use Remote numeric keypad to enter channel

numbers.

SET UP

ENTER CHANNEL

t

MANUAL PROGRAM

u

TO ADD

TO DELETE

3

17 l

I

VOL

VOL

VOL

CON MENU OPERATION

CC

(Closed Captioning)

This television co ntains a bui lt-i n de co der th at d is pl ay s (Closed Capti one d) tex t across the scree n (w hi te or colored

CC

letters on black backgr ound). It allows th e viewer to read the dialogue of a tele vision program or other informati on. The
program viewed must include Closed Captioning for the feature to work.

CC

Mode

Activates the onscreen Closed Caption feature by selecting one of the following modes:

r OFF - When Closed Caption is not desired.

Note: While in OFF mode, press MUTE button to display Closed Caption.

r C1 - For video related information to be displayed, up to 4 lines onscreen at a time. (It does not block relevant parts of the picture).

Text may be in any language.

r C2 - For other modes of video related information.

SETUP

IDIOMA/
LANGUE

PROG CHAN

CC

OTHER ADJ.

CC MODE OFF

Press to select C1, C2, or OFF.

Note: C1 mode is recommended for viewing Closed Caption.

Other Adjustments

In SETUP Menu under OTHER ADJ. select:

r AUTO POWER ON - Select SET to power up the TV at the same time as the Cable box or other components or select OFF.

SETUP

IDIOMA/
LANGUE

PROG CHAN

CC

OTHER ADJ.

AUTO POWER ON OFF

Press to select OFF or SET.

PICTURE

Note: Refer to page 15 for Icon Menu Navigation procedures.

Video Adj.

In Picture menu under VIDEO ADJ. select:

r COLOR - Adjusts desired color intensity.
r TINT - Adjusts natural flesh tones.
r BRIGHTNESS - Adjusts dark areas of picture.
r PICTURE - Adjusts white a reas of picture.
r SHARPNESS - Adjusts clarity of outline detail.
r NORMAL - Reset all picture adjustments to factory default settings.

r Press to select desired picture adjustment.
r Press or to adjust.

18 l

TIMER

CH

VOL

CH

CH

CH

Clock Set

Note: Refer to page 15 for Ic on Menu Navigation procedures.

Clock Set

Set the time of the day.

TIMER

CLOCK SET

SLEEP
TIMER

TIME - - : - -

Sleep Timer

In TIMER menu, Select SLEEP to turn television off in 30, 60 or 90 minutes. Select NO to turn off timer.

TIMER

AM

r Press or to select hours AM or PM.

VOL

VOL

r Press to select minutes position.
r Press or to select minutes.

VOL

VOL

I

CON MENU OPERATION

CLOCK SET
SLEEP

TIMER

HOW LONG?

NO

u

Press to select 30, 60, 90 or NO.

Timer

In TIMER menu, select timer to turn the telev ision on and off at selec ted times, on selec ted channels, an d on selected
days.TIME must be entered in CLOCK SET to operate the TIMER features.

TIMER

CLOCK SET

SLEEP

TIMER

MODE ONE DAY

ON TIME - - : - -

OFF TIME - - : - -

ENTER CHANNEL - - -

SET

NO

r Press to select day or days.
r Press to select ON TIME, then press .

r Repeat for setting OFF TIME.
r Press to select ENTER CHANNEL, then press to

u

r Press to select SET, then press to sele ct NO, ONE

VOL

VOL

VOL

select channel.

VOL

DAY or DAILY.

Turn Off After 90 Minutes

The television automatically turns OFF after
90 minutes when turned ON by the TIMER.
If the OFF time is selected or if a key is
pressed, the automatic OFF after 90
minutes will becancelled.

TIMER Activation

The TIMER is active when the television is
OFF or ON. The television will switch to the
selected channel at the selected time set in
the TIMER.

19 l

I

VOL

VOL

VOL

CON MENU OPERATION

AUDIO

Note: Refer to page 15 for Icon Menu Navigation procedures.

Audio ADJ.

r MODE - Select STEREO, SAP (Second Audio Program) or MONO. (Use MONO when stereo signal is weak).

AUDIO

AUDIO ADJ.
OTHER ADJ.
SPEAKERS

MODE
STEREO SAP MONO

Press to select STEREO, SAP or MONO.

Other ADJ.

r AI SOUND - Equalize overall volume levels across all channels. (AI sound is not available in VIDEO mode).

AUDIO

AUDIO ADJ.
OTHER ADJ.

SPEAKERS

AI SOUND

Press to select ON or OFF.

Speakers (some models)

In AUDIO menu under SPEAKERS:

AUDIO

AUDIO ADJ.

OTHER ADJ.

SPEAKERS

ON

Press to select:

r ON - TV speakers operate normally.
r OFF & Variable Audio Out - TV speakers off - audio adjustable by television.

u

r OFF & Fixed Audio Out - TV speakers off - audio adjustable by the external

amplifier only.

20 l