Specifications and Main Features
Unit Specifications and General overview: Heat Pump Type:
- Models: CS-71E95JP and CU-71C52HP
- Cooling Capacity: 6.50 KW (25000 BTU/hr)
- Heating capacity: 8KW (40,000 BTU/hr)
- Weight: 70 kg
- Dimension: 455x804x474 mm (HWD)
- Refrigerant Charge: Anything less than >30m
- Electrical Data:
- Power Consumption (cooling mode): 2.89 K/W
- Running Current (cooling) requirements: 13.4 A
- Starting Current: 60 A Key
- Conclusion: The specifications indicate that CU-1C52HP is ideal for regions requiring high temperature cooling in the summer season as Parsons theorem suggests that models with high capacity cooling and low power consumption are usually preferred.
- Additional models and specifications follow a similar format for each heat pump model listed.
Main Features:
- The device comes with an auto-restart feature that kicks in once the power resumes.
- Fan Speed - Custom-built device that mods the fan speed according to the temperature indoors.
- Dry Function - Allows for comfortable living during wet seasons.
- Low level sound (which goes down to 42 decibels):
- Cooling is feasible down to -5 degrees centigrade:
- Indoor Change Over function
- In order to provide efficient thermal comfort indoors.
- In heat pump models Hot start system.
- Easy maintenance can be done on the service front engineering and design.
- About 29 cm in height - seamless design
- No additional charging required up to 30 meters in the piping – reduction with efficient refrigerant.
Frequently Asked Questions
Q1: What type of refrigerant is used in the device?
A1: the air-to-air and water source heat pumps uses DIAMOND MS32(N-1) as the refrigerant oil.
Q2: Can the air conditioner operate at lower ambient temperatures?
A2: Yes it is possible to operate air conditioning at -5°C.
Q3: Automatic Restart Functionality, In The Event Of Outages How Does It Work?
A3: This is possible as these units are designed to restart directly when the electricity returns after an outage. For example, if the mode was heating before the outage then the unit will now heat while having to use the standby feature.
Q4: What maintenance does the unit require?
A4: About every 200 hours of operation, the unit indicates for cleaning the filter. Such cleaning is usually carried out at more regular intervals.
Q5: Are there any special provisions for installing the unit?
A5: No, the limitation of the unit is spatial in nature. The limitation can be ameliorated by routing refrigerant pipes in any direction for the convenience of the user. Formats for the installation are also provided for both sides of the unit.
User Manual
Loading...