Frequency Range531 - 1602kHz
Usable Sensitivity25 dB/µV
Image Rejection Ratio50 dB
4Ω
1.0 Vp-p (75Ω)
1.0 Vp-p (75Ω)
Audio Section
Output voltage/Impedance2 Vrms/600 Ω
Frequency Characteristics
(When “LARGE” is Selected)
Front L/R, Center,
Rear (Surround) L/R
Delay Time
Dolby Digital
Center0-5ms
Rear (Surround) L/R0 - 15 ms
Dolby Pro Logic
Rear (Surround) L/R15 - 30 ms
Distortion
Front L/R0.01% (1kHz,0dB,PCM Input)
Dynamic Range96dB (During CD Playback)
S/N Ratio100dB (During CD Playback)
Monitor
Liquid Crystal Panel7” wide
Screen Dimensions (W×H×D) 154 × 87 × 177mm
Number of Pixels336,960 pixels
Valid Pixel RatioOver 99.99%
Display MethodTransparent color filter format
Drive MethodTFT (Thin Film Transistor)
* Specifications and the design are subject to possible modification
Dimensions** (W × H × D)178 × 50 × 165 mm
Weight**2.4 kg
without notice due to improvements.
** Dimensions and Weight shown are approximate.
•
• Above specifications comply with EIA standards.
• •
CONTENTS
Page Page
1 ABOUT LEAD FREE SOLDER (PbF) 3
2 FEATURES
3 REPLACING THE FUSE
4 MAINTENANCE
5 LASER PRODUCTS
6 DISASSEMBLY INSTRUCTIONS
7 WIRING CONNECTION
8 TERMINALS DESCRIPTION
9 PACKAGE AND IC BLOCK DIARAM
3
10 REPLACEM ENT PARTS LIST
11 EXPLODED VIEW (Unit)
3
3
12 DVD PLAYER PARTS LIST
3
13 EXPLODED VIEW (DVD Deck)
14 WIRING DIAGRAM
4
6
15 SCHEMAT IC DIAGRAM
7
16 BLOCK DIAGRAM
11
20
33
34
38
39
47
55
2
CQ-VD7001H
1 ABOUT LEAD FREE
SOLDER (PbF)
Distinction of PbF PCB:
PCBs (manufactured) using lead free solder will have a PbF
stamp on the PCB.
Caution :
•
•
Pb free solder has a higher melting point than standard
• •
solder; Typically the melting point is 50 - 70°F (30 40°C) higher. Please use a soldering iron with
temperature control and adjust it to 700 ± 20°F (370 ±
10°C). In case of using high temperature soldering iron,
please be careful not to heat too long.
•
•
Pb free solder will tend to splash when heated too high
• •
(about 1100°F/600°C)
•
•
This lead free solder will be used for the products after
• •
serial No. 1,000,001.
2 FEATURES
•
•
Integration of the monitor, FM/AM radio, DVD Video, Video
• •
CD player and CD/MP3/WMA player
•
•
Built-in AV Input/Output Terminals
• •
•
•
Built-in Dolby Digital decoder, DTS decoder
• •
•
•
Built-in DSP
• •
•
•
GUI (Graphic User Interface)
• •
•
•
ID code
• •
•
•
CS Auto (Circle Surround Automotive)
• •
•
•
Touch Panel Operation
• •
•
•
DVD-R, DVD-RW Playback
• •
5 LASER PRODUCTS
3 REPLACING THE FUSE
Use fuses of the same specified rating (15A). Using different
substitutes or fuses with higher ratings, or connecting the unit
directly without a fuse, could cause fire or damage to this unit.
4 MAINTENANCE
Your products is designed and manufactured to ensure a
minimum of maintenance. Use a soft cloth for routine exterior
cleaning. Never use benzine, thinner or other solvent.
3
CQ-VD7001H
6 DISASSEMBLY INSTRUCTIONS
6.1. How to Remove the Flexible PCB(AP1)
4
6.2. How to Disassemble & assemble
CQ-VD7001H
5
CQ-VD7001H
7 WIRING CONNECTION
6
8 TERMINALS DESCRIPTION
CQ-VD7001H
8.1. Main Block
IC601 : C2DBLK000085
Pin
No.
1AVREF0Reference voltage for A/D
2AVSSGround for A/D converter-0
3ANT CNTAntenna controlO3.2
4RM CUTExt. remote control output cut
5AVREF1Reference voltage for A/D
6Touch RESETTouch Panel resetO3.2
7TN CNTExt. TV tuner controlO3.2
8IC/FLMD0Flash memory update control-0
9VDD+3V power supply-3.2
22 OSD CSOSD chip selectO1.0
23 OSD DOOSD control dataO0.6
24 OSD CLKOSD data shift clockO2.2
25 XM
26 CH DATA/XMSI
27 CH CLK/XM
28 REMO DATAExt. remote control signalI5.0
29 CHC REM OUT Changer remote control codeO5.1
30 I2C CLKI2C bus clockO5.1
31 I2C DATAI2C bus dataO5.1
32 OSD RESETOSD resetO3.2
33 EVSSGround for ext. unit-0
34 EVDD+3V power supply for ext. unit-3.2
35 DVD TX(MO)DVD deck TX dataO3.2
36 DVD RX(MI)DVD deck RX dataI3.2
37 BEEPBeep signalO0
38 AMP CNTExt. AMP controlO3.2
39 AMP STBExt. AMP stand-byO5.0
40 TFT SI(MI)TFT unit communication dataI0
41 TFT SO(MO)TFT unit communication dataO0.5
42 TFT CLKTFT unit communication clockO5.0
43 AMP MUTEInternal power AMP muteO0
44 SYS ONSystem power (5V) control for
45 NAVI REMO
46 ENTERENTER keyI3.3
47 FRONT MUTEAudio signal (BEEP NAVI)
48 VD COUNTVertical drive signal countI5.0
49 REAR MUTEVideo out muteO5.0
50 NC(Ground pull down)O0
PortDescriptionI/OVol
converter
off
converter
voltage reg.
DET2
SO(MO)/TXDA0
/RXDAO
DET1
OUT
Changer data strobe / XM
connection check
detection
XM dataO5.0
Changer data / XM dataI0
Changer clock / XM detection
signal
SW PCB
NAVI remote control dataO0
mute
-3.2
O0
-3.2
-2.5
I5.0
I0
I3.1
O0
O5.0
(V)
Pin
No.
51 DE EMPH I2C1 I2C1 de-emphasis controlO0
52 SYS MUTE (F) System mute (FRONT)O5.0
53 SYS MUTE (S) System mute (SURROUND)O5.0
54 SYS MUTE (C) System mute (CENTER)O5.0
55 SYS MUTE(SW) System mute (SW)O5.0
56 BATT SENSBattery level detectionI5.0
57 ACC SENSACC level detectionI5.0
58 PULSEMonitor position detection
59 SYS PWRSystem power controlO5.0
60 MAIN PWRMain power controlO3.2
61 MONI PWRMonitor power controlO3.2
62 NAVI RM CHNAVI remote control output
63 MODE LEDMODE LED on/offO3.2
64 EJECT LEDEJECT LED on/offO0
65 NAVI LEDNAVI LED on/offO0
66 MADrive mechanism control
67 MBDrive mechanism control
68 MCDrive mechanism control
69 BVSSGround for bus I/F-0
70 BVDDPower supply for bus I/F-3.2
71 FAN CNTFan motor power controlO3.2
72 ROTARY.1Rotary encoder signal (VOL
73 ROTARY.2Rotary encoder signal (VOL
74 DSP INITDSP initialise detectionI3.3
75 RADIO CNTRadio power controlO3.2
76 DVD MUTEDVD mute request / Flash
77 DSP SCKShift clock for DSP
78 DSP SDADSP communication dataO3.1
79 DSP RESETDSP resetO3.2
80 DVD CNTDVD deck power controlO3.2
81 DVD RESETReset signal for DVD deck
82 FRAM HOLDF-RAM holdO0
83 FRAM CLKShift clock for F-RAM dataO0
84 FRAM DOF-RAM serial dataO0
85 FRAM CSF-RAM chip selectO3.2
86 FRAM WPF-RAM write protectO0
87 SW PWRSwitching power supply
88 MODEMODE key detectionI3.2
89 JOY A/DADC input terminal for joy stic
92 SIDE BRAKESide break detectionI3.3
93 INIT DETDestination detectionI0
94 POSI SENSADC input terminal for
95 NAVI MUTENAVI muteI0
96 OFFSET DETPower IC abnormality
97 AD KEYADC input terminal for AD
98 REVERSEREVERSE signal detectionI3.3
99 FRAM DIF-RAM serial dataI0
100 V NAVINAVI RGB signal changeO0
PortDescriptionI/OVol
I5.0
pulse
O0
change
O3.2
signal
O3.2
signal
O3.2
signal
I0
DOWN)
I3.3
UP)
I3.3
memory update cnt.
O2.8
communication data
O3.2
control MPU
O0
frequency change
I3.3
signal
I3.3
detection
I2.4
monitor position signal
I0
detection
I3.3
key signal
(V)
7
CQ-VD7001H
8.2. TFT Block
PIN
NameDescriptionI/O(V)
No.
1UCOM 5V In connection with VDD A/D
2AvssA/D converter ground potential-0
3IC/VPPInternal connection terminal (in
4VDDPositive power supply-5.1
5VSSGND-0
6X1Main system clock-2.3
7X2Main system clock-2.6
8RESETSystem reset inputI5.0
9XT1In connection with VDD.-5.1
10XT2(NC)No Connection-11TFT
RESET
12MONIOVDVertial SYNC signalI1.9
13HPOS0H Position Data 0I/S3.0
14HPOSIH Position Data 1I/S3.0
15HPOS2H Position Data 2I/S0
16HPOS3H Position Data 3I/S0
17HPOS4H Position Data 4I/S2.8
18SIDE2ASPECT switch signal output Side
1VDDIOI/O pad power (3.3V)-3.3
2MD10SDRAM data busI/O0
3MD11SDRAM data busI/O0.6
4VDDCore power (1.8V)-1.8
5MD12SDRAM data busI/O0
6VSSIOI/O pad ground-0
7MD13SDRAM data busI/O0.7
8MD14SDRAM data busI/O0.5
9MD15SDRAM data busI/O0
10VDDIOI/O pad power (3.3V)-3.3
11/DQM1SDRAM data byte enableO0
12MA9SDRAM address busO0
13MA8SDRAM address busO0
14VSSIOI/O pad ground-0
15MA7SDRAM address busO2.3
16MA6SDRAM address busO1.9
17VSSCore ground-0
18MA5SDRAM address busO1.1
19VDDIOI/O pad power (3.3V)-3.3
20MA4SDRAM address busO2.0
21MA3SDRAM address busO2.3
22MCLKSDRAM clockO1.7
23VSSIOI/O pad ground-0
24CKESDRAM clock enableO3.3
25MA2SDRAM address busO2.3
26MA1SDRAM address busO1.0
27VDDIOI/O pad power (3.3V)-3.3
28MA0SDRAM address busO1.0
29MA10SDRAM address busO0
30MA11Not used-31VSSIOI/O pad ground-0
32MA12SDRAM address busO2.1
33MA13SDRAM address busO2.1
34VDDCore power (1.8V)-1.8
35/CS0SDRAM primary bank chip selectO2.7
36VDDIOI/O pad power (3.3V)-3.3
37/RASSDRAM command bitO3.1
38/CASSDRAM command bitO2.9
39/WESDRAM command bitO3.2
40VSSIOI/O pad ground-0
41/DQM0SDRAM data byte enableO0
42/DQM2SDRAM data byte enableO0
43MD16SDRAM data busI/O0.5
44VDDIOI/O pad power (3.3V)-3.3
45MD17SDRAM data busI/O0.5
46MD18SDRAM data busI/O0.5
47VSSCore ground-0
48MD19SDRAM data busI/O0.7
49VSSIOI/O pad ground-0
50MD20SDRAM data busI/O0
51MD21SDRAM data busI/O1.5
52MD22SDRAM data busI/O1.0
53VDDIOI/O pad power (3.3V)-3.3
54MD23SDRAM data busI/O0
55MD24SDRAM data busI/O0.5
56MD25SDRAM data busI/O0.5
57VSSIOI/O pad ground-0
58MD26SDRAM data busI/O0.5
59MD27SDRAM data busI/O0.8
60MD28SDRAM data busI/O0
61MD29SDRAM data busI/O1.0
62VDDIOI/O pad power (3.3V)-3.3
63MD30SDRAM data busI/O0.7
64MD31SDRAM data busI/O0.5
65/DQM3SDRAM data byte enableO0
66/CS1Not usedO67VSSIOI/O pad ground-0
68SPDIFS/PDIF digital audio outputO1.3
69VSSCore ground-0
PortDescriptionsI/O(V)Vol
(V)
Pin
No.
70AINDigital audio input for digital microI3.3
71AOUT3Serial audio data (Left/Right CH)O0
72AOUT2Serial audio data (Center/LFE CH)O0
73AOUT1Serial audio data (Sound Left/Right CH)O0
74AOUT0Serial audio data (Left/Right CH)O0
75VDDIOI/O pad power (3.3V)-3.3
76PCMCLKAudio DAC PCM sampling clockO1.8
77VDDCore power (1.8V)-1.8
78ACLKAudio interface serial data clockO1.7
79LRCLKLeft/Right channel clockO1.7
80/SRSTReset signalO3.3
81/RSTPPower on resetI3.3
82VSSIOI/O pad ground-0
83RXD1Not used-84SSPIN1SSP1 data in / UART1 16X clockI/O15
85VSSCore ground-0
86SSPOUT1SSP1 sata out / UART1 DTRI/O0
87SSPCLK1SSP1 clock / UART1 CTSI/O3.3
88SSPCLK0Not used-89VDDCore power (1.8V)-1.8
90SSIN0Not used-91VDDIOI/O pad power (3.3V)-3.3
92SSPOUT0Not used-93TXD0UART0 serial dataO3.2
94RXD0UART0 serial dataI3.0
95/CTS0Not used-96/RTS0Not used-97VSSIOI/O pad ground-0
98CXICrystal Oscillator terminalI1.6
99CXONot used-100 OSCVSSOscillator ground-0
101 OSCVDDOscillator power (1.8V)-1.8
102 MVCLVDDMain/Video clock PLL power (3.3V)-3.3
103 SCENNot used-104 MVCKVSSMain/Video clock PLL Ground-0
105 ACLKVSSAudio clock PLL ground-0
106 SCMDNot used-107 ACLKVDDAudio clock PLL power-3.3
108 VDDDACDAC digital power (1.8V)-1.8
109 VSSDACDAC digital ground-0
110 CVBS2/CR/R Composite Cr/Component Cr/SCART RedO0.5
111 IOMCascaded DAC differential outputO1.0
112 C/CB/BChrominance/Component Cb/SCART CbO0.7
113 VAA3DAC analog power (3.3V)-3.3
114 Y/GLuminance/SCART GO0.4
115 VSSADAC analog ground-0
116 VREFNot used-117 VAA--1.8
118 CVBS/CComposite/S-Video ChrominanceO0.5
119 RSETCurrent setting resistor connectionO1.4
120 COMPCompensation capacitor connectionO2.0
121 VSSCore ground-0
122 VCLKNot used-123 VSYNCNot used-124 HSYNCNot used-125 VDDIOI/O pad power (3.3V)-3.4
126-
131
132 VSSIOI/O pad ground-0
133 Not used-134 Not used-135 VDDCore power (1.8V)-1.9
136-
139
140 VDDIOI/O pad power (3.3V)-3.4
141-
144
145 /PWE3Not used-146 AD23Not used-147 VSSIOI/O pad ground-0
148-
150
151-
153
PortDescriptionsI/O(V)Vol
VI07-02Not used--
AD31-28Not used--
AD27-24Not used--
AD22-20Not used--
AD19-17Address/Data busI/O0
CQ-VD7001H
(V)
9
CQ-VD7001H
Pin
No.
154 VDDIOI/O pad power (3.3V)-3.4
155 AD16Address/Data busI/O0
156 /PWE2Not used--
157,
158
159 VDDCore power (1.8V)-1.9
160 SCLKExternal bus clockO2.1
161 ACKProgrammable WAIT/ACK/RDY controlI3.4
162 VSSIOI/O pad ground-0
163-
168
169 VDDIOI/O pad power (3.3V)-3.4
170 /PWE1Not used-171 VSSCore ground-0
172-
176
177 VSSIOI/O pad ground-0
178-
180
181 VDDIOI/O pad power (3.3V)-3.4
182 /PWE0Byte write enableO0
183 ALEAddress latch enableO0
184-
187
188 VSSIOI/O pad ground-0
189 RDRead signalO3.4
190 LHLDANot used-191 LHLDNot used-192 VDDCore power (1.8V)-1.9
193 /PCS0Peripheral chip select 0O3.4
194 XI01Not used-195 DACCS2DAC output select 2O3.4
196 VDDIOI/O pad power (3.3V)-3.4
197 DACCS1DAC output select 1O3.4
198 NINTCPPMNot used-199 CPPMCSNot used-200 XI06Not used-201 VSSCore ground-0
202 FRAMCSFRAM chip selectionO0
203 DACRSTDAC resetO0
204 VSSIOI/O pad ground-0
205 FEPCSFront End Pro. LSI chip selectO3.4
206 FEPRSTFront End Pro. resetO3.4
207 SODCCSSODC LSI chip selectionO3.4
208 NINTHOSTHOST interruptI3.4
209 NINTDDCDDC interruptI3.2
210 VDDIOI/O pad power (3.3V)-3.4
211 NINTDSCDSC interruptI3.5
212 VDDCore power (1.8V)-1.9
213 DSYNVDVD parallel mode sector SYNCI3.4
214 DREQDVD parallel mode data requestO3.4
215 DCLKData sampling clockI3.4
216 DSTBParallel mode data valid/Serial mode clockI0.7
217 DVD0DVD drive parallel data portI0
218 VSSIOI/O pad ground-0
219 DVD1DVD drive parallel data portI0
220 DVD2DVD drive parallel data portI0
221 DVD3DVD drive parallel data portI3.4
222 DVD4DVD drive parallel data portI0.8
223 DVD5DVD drive parallel data portI0.8
224 VDDIOI/O pad power (3.3V)-3.4
225 DVD6DVD drive parallel data portI3.4
226 DVD7DVD drive parallel data portI3.4
227 MD0SDRAM data busI/O0.5
228 VSSIOI/O pad ground-0
229 MD1SDRAM data busI/O0
230 VSSCore ground-0
231 MD2SDRAM data busI/O0.8
232 MD3SDRAM data busI/O0.8
233 VDDIOI/O pad power (3.3V)-3.3
234 MD4SDRAM data busI/O3.3
235 MD5SDRAM data busI/O0
236 MD6SDRAM data busI/O0.8
237 VSSIOI/O pad ground-0
PortDescriptionsI/O(V)Vol
AD15, 14Address/Data busI/O0
AD13-08Address/Data busI/O0
AD7-3Address/Data busI/O0
AD02-00Address/Data busI/O0
LA0-3Latch addressO3.3
(V)
Pin
No.
238 MD7SDRAM data busI/O0
239 MD8SDRAM data busI/O0
240 MD9SDRAM data busI/O0
PortDescriptionsI/O(V)Vol
(V)
10
9 PACKAGE AND IC BLOCK DIARAM
9.1. Main Block
IC101 : C0ABBB000090
CQ-VD7001H
IC201, IC202 : C0ABCB000051
IC102 : C0JBAA000102
IC151, IC604 : C0JBAA000115
IC351 : C1AB00001604
IC203, IC252, IC301, IC302 : C0ABBB000105
IC608 : C0JBAB000255
11
CQ-VD7001H
IC303 : C0ZBZ0000770
IC602 : C3GBCC000001
IC612 : C0FBBD000065
12
CQ-VD7001H
IC609, IC610 : C0JBAZ001166
IC754 : C0DBAMG00015
IC611 : C0JBAZ000525
13
CQ-VD7001H
IC752, IC753, IC755 : C0DBEKG00001
IC751 : AN8065SE1
9.2. TFT Block
IC756 : C0CBABC00037
IC422 : C0FBBD000038
14
CQ-VD7001H
IC451 : C0DBAZZ00095
IC801 : AN2526FH
15
CQ-VD7001H
IC421 : C3EBDC000049
IC861 : C1AB00001825
IC802, IC803, IC863 : C0JBAR000155
16
CQ-VD7001H
IC804 : C0ZBZ0000432
IC941 : C0ABBB000069
IC902 : C0ABBB000105
IC951 : C0DBAZA00013
17
CQ-VD7001H
9.3. DVD Deck Block
IC101 : AN8703FH-V
IC271 : YEAMT7ST08UL
IC311 : C0GBY0000012
IC275, IC561 : C0JBAZ001014
IC321 : C0GBH0000006
18
CQ-VD7001H
IC411 : YEAMC78L05E2
IC441 : MN13821JP
IC651 : C3GBCC000001
IC652 : C0JBAB000255
IC631, IC641 : C0JBAH000082
19
CQ-VD7001H
10 REPLACEMENT PARTS
LIST
Notes :
1. Be sure to make your orders of replacement parts
according to this list.
2. Important safety notice: Components, identified by
have special characteristics important for safety. When
replacinganyofthesecomponents,useonly
manufacturer´s specified parts.
3. Location keys in the remarks column indicates the general
location of the parts shown in the exploded drawing, as in a
road map.
4. The marking (RTL) indicates that Retention Time is limited
for this item. After the discontinuation of assembly in
production, the item will continue to be available for a
specific period of time. The retention period of availability is
dependent on the type of assembly, and in accordance with
the laws governing part and product retention. After the end
of this period, the assembly will no longer be available.
•
•
Order intake period is basically six months after the first
• •
shipment.
5. “T” marks in remarks colum are indicated supply parts of
TAMACO.
Ref. No.Part No.Part Name & DescriptionRemarks
[E-3043A] Main Block
IC´s AND TRANSISTORs
IC101C0ABBB000090 IC
IC102C0JBAA000102IC
IC151C0JBAA000115IC
IC200C1EA00000043IC
IC201C0ABCB000051 IC
IC202C0ABCB000051 IC
IC203C0ABBB000105 IC
IC251C1AB00000284IC
IC252C0ABBB000105 IC
IC301C0ABBB000105 IC
IC302C0ABBB000105 IC
IC303C0ZBZ0000770IC
IC351C1AB00001604IC
IC352C1AB00000164IC
IC500C2HBCH000007 IC
IC601C2DBLK000085 ICT
IC602C3GBCC000007 IC
IC603C0JBAA000148IC
IC604C0JBAA000115IC
IC608C0JBAB000255IC
IC609C0JBAZ001166IC
IC610C0JBAZ001166IC
IC611C0JBAZ000525IC
IC612C0FBBD000065 IC
IC751AN8065SE1IC
IC752C0DBEKG00001 IC
IC753C0DBEKG00001 IC
IC754C0DBAMG00015 IC
IC755C0DBEKG00001 IC
IC756C0CBABC00037 IC
PA51C5BA00000121Electronic TunerT
Q151B1GBCFJN0009 Transistor
Q152B1GBCFJN0009 Transistor
Q153B1GBNCBC0001 Transistor
Q154B1BDEL000001 Transistor
Q201XN0F26100LTransistor
Q202B1GBHBEA0003 Transistor
Q203XN0F26100LTransistor
Q204B1GBHBEA0003 Transistor
Q205B1GBHBEA0003 Transistor