Panasonic CQ-RDP383N User Manual

Removable Front Panel MP3 WMA CD Player/Receiver with CD Changer Control

CQ-RDP383N

¡Please read these instructions carefully before using this product and keep this manual for future reference. ¡Bitte lesen Sie diese Bedienungsanleitung vor der Verwendung dieses Produktes aufmerksam durch und bewahren Sie sie danach

für spätere Nachschlagzwecke sorgfältig auf.

¡Prière de lire ces instructions attentivement avant d’utiliser le produit et garder ce manuel pour l’utilisation ultérieure. ¡Leest u deze instructie alstublieft zorgvuldig door voor u dit product in gebruik neemt en bewaar deze handleiding voor later gebruik. ¡Läs igenom denna bruksanvisning noga innan produkten tas i bruk. Spara bruksanvisningen för framtida behov. ¡Si prega di leggere attentamente queste istruzioni prima di usare questo prodotto e di conservare questo manuale per usi futuri. ¡Lea con atención estas instrucciones antes de utilizar el producto y guarde este manual para poderlo consultar en el futuro.

Operating Instructions

Bedienungsanleitung

Manuel d

instructions

Gebruiksaanwijzing

Bruksanvisning

Manuale di istruzioni

Manual de Instrucciones

POWER

PTY

CQ-RDP383N

TRACK

TUNE

MUTE

SCANSCROLLFOLDER/DISC REPEATRANDOM

APM

SRC

EON・PTY・CT

TEXT

YEFM284011 ND0203-1023 Printed in China

Matsushita Electric Industrial Co., Ltd.

Web Site :http://www.panasonic.co.jp/global/

Operating Instructions

Bedienungsanleitung

Manuel d’instructions

Manuel d

Gebruiksaanwijzing

Manuale di istruzioni

Manual de Instrucciones

’instructions

Bruksanvisning

4 5

CQ-RDP383NCQ-RDP383N

E N

I S H

E N

I S H

Car Audio

BAND/DISC UPBAND/DISC UP

PRG

(ATT)(ATT)

PWR

VOL

MODE

MUTE

TRACK

TUNE

VARO! AVATTAESSA OLET ALTTIINA LASERSÄTEILYLLE. ÄLÄ TUIJOTA SÄTEESEEN.

VARNING LASERSTRÅLNING NÄR DENNA DEL ÄR ÖPPNAD. STIRRA EJ IN I STRÅLEN.

ADVARSEL LASERSTRÅLING NÅR DEKSEL ÅPNES. STIRR IKKE INN I STRÅLEN.

Laser Product

Label Indications and Their Locations

CAUTION

LASER RADIATION WHEN OPEN. DO NOT STARE INTO BEAM.

Caution: This product utilizes a laser. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

Laser products:

Wave Length 780 nm Laser Power No hazardous radiation is emitted with safety protection.

Do not take apart this unit or attempt to make any changes yourself.

This unit is a very intricate device that uses a laser pickup to retrieve information from the surface of compact discs. The laser is carefully shielded so that its rays remain inside the cabinet. Therefore, never try to disassemble the player or alter any of its parts since you may be exposed to laser rays and dangerous voltages.

CLASS 1 LASER PRODUCT

Caution Label

Deck Ass’y (Upper Side)

Volume Level

For your driving safety, keep the volume level low enough to be aware of road and traffic conditions.

Car Washing

To avoid electrical shorts which may cause fire, or other damage, do not expose this product (including the speakers and CDs) to water or excessive moisture.

Car Ventilation

If your car is parked for several hours in direct sunlight, the temperature inside the car may become very high. It is advisable to drive the car and give the interior a chance to cool down before switching the unit on.

Power Supply

This product is designed to be used in a car having a 12Volt negative ground battery system.

Disc Mechanism

Do not insert coins or any small objects. Keep screwdrivers and other metallic objects away from the disc mechanism and disc.

Service

This product is made of precision parts. Do not attempt to disassemble or adjust any parts. For repair, please consult your nearest authorized Panasonic Service Center.

Note: The preset memory is cleared to return to the original factory setting when the power connector or battery is disconnected.

Precautions

Panasonic welcomes you to their constantly growing family of electronic products owners. We endeavor to give you the advantages of precise electronic and mechanical engineering, manufactured with carefully selected components, and assembled by people who are proud of the reputation their work has built for our company. We know this product will bring you many hours of enjoyment, and after you discover the quality, value and reliability we have built into it, you too will be proud to be a member of our family.

Accessories

¡ Operating Instructions............................................................................................... 1

¡ Supplied Hardware.......................................................................... 1 set (a page 26)

¡ Warranty Card............................................................................................................ 1

¡ Removable face plate case ......................................................................................... 1

¡APPREIL À LASER DE CLASSE ¡KLASS 1 LASER APPARAT ¡LUOKAN 1 LASERPLAITE

CAUTION LASER RADIATION WHEN OPEN. DO NOT STARE INTO BEAM.

VORSICHT LASERSTRAHLUNG, WENN ABDECKUNG GEÖFFNET. NICHT IN DEN STRAHL BLICKEN.

ATTENTION RAYONNEMENT LASER EN CAS D'OUVERTURE. NE PAS REGARDER DANS LE FAISCEAU.

ADVARSEL LASERSTRÅLING VED ÅBNING. SE IKKE IND I STRÅLEN.

Mode (Source)

Power

Volume

Tune, Track Search, Fast Forward/Reverse

MUTE

Band, Disc up

Note: Optional remote controller is available from your local dealer. (CA-RC61EX).

Remote Control Unit (Option)

APM

POWER

BAND

FOLDER/DISC SCROLL RANDOM SCAN REPEAT

MUTE

CQ-RDP383N

PTY

TUNE TRACK

CLOCK

DISP

CQ-RDP383N

E N G

I S H

CQ-RDP383N

E N G

I S H

Radio

(a Page 8)

Demonstration Message

When the power is switched on for the first time, a demonstration message appears on display.

To cancel this display,Press [DISP] (Display)

Power

Turn your car's ignition key to ACC or ON position.

ON : Press [SRC] (POWER). OFF : Press and hold [SRC] (POWER) for

more than 2 seconds.

Opening Message “WELCOME” is displayed when the power is switched on.

POWER

PTY

CQ-RDP383N

DISP

TRACK

TUNE

MUTE

SCANSCROLLFOLDER/DISC REPEATRANDOM

APM

BAND

SRC

EON・PTY・CT

General

Source

Press [SRC] (Source) to change the source.

CD Player

(a Page 17)

MP3/WMA Player

(MP3/WMA data disc is in

the player. a Page 18)

CD Changer

(

A optional CD changer is connected and magazine is in the changer.

a Page 22)

Volume

Note: The volume level can be set independently for each source. (For radio, one volume setting for AM, one volume setting for all FMs)

Mute

ON : Press [MUTE] to mute the sound completely. OFF : Press again.

Loudness

ON : Press and hold [MUTE] (LOUD) for more than

2 seconds to enhance bass and treble tones at low or medium volume.

OFF : Press and hold again.

Clock Setting

Note: Adjust the clock when “NO CT” appears on the screen.

Select the radio AM mode. (a Page 8)

Press and hold [DISP] (CT) for more than 2 seconds.

Adjust HOUR.

[[] : put forward hour. []] : put back hour.

Press [DISP] (CT).

Adjust MINUTE.

[[] : put forward minute. []] : put back minute.

Press [DISP] (CT).

Note: When a broadcast of FM Radio Data System is

received, the clock is put right automatically by the Clock Time service. (a Page 10)

Down

Setting Range : 0 to 40

Scrolling....

[MUTE] (LOUD)

DISP

MUTE

SRC

[]][[]

(Adjust HOUR/MINUTE)

MUTE indicator

LOUD indicator

CQ-RDP383N

E N G

I S H

CQ-RDP383N

E N G

I S H

Radio Mode

Press [SRC] (Source) to select the radio mode.

Radio Mode Display

Band

Press [BAND] to change the bands.

Tuning

[[] : Higher frequency []] : Lower frequency

Press and hold [[] or []] for more than 0.5 seconds, then release. Seeking will start.

FM Stereo Indicator

Lights up during reception of FM stereo broadcast

Mono/Local Selection

MONO : Monaural reception. Select MONO to

reduce noise when receiving a weak stereo broadcast.

LOCAL :Tunes in strong stations only.

FM broadcasts

Press and hold [PTY] (MONO/LOC) for more than 2 seconds to change the mode.

AM broadcast

Press [PTY] (MONO/LOC) to switch LOCAL mode on and off.

MONO/LOCAL indicator Example: MONO ON/LOCAL ON

Station Preset

Up to 6 stations can be stored in each of the FM1, FM2, FM3 and AM (LW/MW) band selections.

Auto Preset Memory

Automatically save stations with good reception in the preset memory.

q Press [BAND] to select a band. w Press and hold [BAND] (APM: Auto Preset Memory) for more than 2 seconds.

The 6 stations with good reception will be automatically saved in the memory under preset number 1 to 6. Once set, the preset stations are sequentially scanned for 5 seconds each.

Notes:

¡ To stop the scanning, press one of the buttons from [1] to [6]. ¡ New stations overwrite existing saved stations after following this procedure. ¡ Only RDS stations will be saved at default setting (AF ON). To select non RDS stations too, set AF OFF.

(a Page 11)

Manual Preset Memory

Manually save a station in preset memory.

q Use manual or seek tuning to find a station. w Press and hold one of the preset buttons from [1] to [6] until the display blinks once.

Preset Station Calling

q Press [BAND] to select a band. w Press the corresponding preset button from [1] to [6] to select a preset station.

Radio

POWER

PTY

CQ-RDP383N

DISP

TRACK

TUNE

MUTE

LOUD

SCANSCROLLFOLDER/DISC REPEATRANDOM

APM

SRC

EON・PTY・CT

FM1

FM2

FM3

AM (LW/MW)

[SRC] (Source)

[BAND] (APM: Auto Preset Memory)

Preset buttons [1] to [6]

(Preset Station)

[]][[]

(Tune)

Preset number

Band

Frequency

AM broadcastFM broadcast

MONO OFF

LOCAL OFF

MONO ON

LOCAL OFF

MONO ON LOCAL ON

MONO OFF

LOCAL ON

LOCAL OFF

[PTY] (MONO/LOC)

Caution: To ensure safety,

never attempt to preset stations while you are driving.

PTY

BAND

SRC

lights

(Default)

CQ-RDP383N

E N G

I S H

CQ-RDP383N

E N G

I S H

Radio Data System (RDS)

RDS Basics

Some FM stations are broadcasting added data compatible with RDS. This radio set offers convenient functions using such data. RDS service availability varies with areas. Please understand if RDS service is not available in your area, the following service is not available, either. This chapter explains the summary and operation regarding RDS. The following functions are available when receiving RDS stations.

Alternative Frequency (AF)

Program Service Name (PS) Display

The name of station is displayed.

Alternative Frequency (AF)

When reception is poor, an RDS station broadcasting the same program is tuned in automatically.

Traffic Program (TP)

Some RDS FM stations periodically provide traffic announcement. The station which broadcast the traffic announcement is called Traffic Program (TP).

Traffic Announcement (TA)

Radio announcements on traffic conditions.

Clock Time (CT) Service

When receiving an RDS station, the CT service automatically adjusts the time. “NO CT” is displayed in areas where CT service is not available. (a Page 7 for Clock Setting)

Program Type (PTY) Display

RDS FM stations provide a program type identification signal. Example: news, rock, classical music, etc. (a Page 13)

Program Identification (PI)

Each program has its own number. This may be used to search for another frequency on which the same program is broadcast.

Region (REG)

Each region has its own number. This may be used to identify the region where the station you are now listening to is located.

POWER

PTY

CQ-RDP383N

DISP

TRACK

TUNE

MUTE

LOUD

SCANSCROLLFOLDER/DISC REPEATRANDOM

APM

BAND

SRC

EON・PTY・CT

Alternative Frequency (AF) Mode

Press [AF] to select one of the following AF modes. AF ON : AF, Best Station Research and PI seek function are active.

: Low level AF operating sensitivi-

ty. (Default)

: High level AF operating sensitiv-

ity.

: When the AF network of an RDS

station is not required.

REG (Region) Mode

Changes the selection range of AF, Best Station Research and PI seek. Press and hold [AF] (REG) for more than 2 seconds to switch on and off.

: The frequency is changed only

for programs within the region.

: The frequency is changed also

for programs outside the region. (Default)

Display Change

Press [DISP] to change the display as follows.

Preset Memory (AF ON Setting)

Preset Station Calling (Best Station Research)

AF self-tuning selects a station with good reception when the preset tuning is activated.

For Poor Reception (PI Seek)

If reception becomes poor when tuning in a preset station, press the same preset number button. The same station with better reception will be searched for. Press the same preset number button again to cancel.

Note: For PI Seek, cancel the TA mode first, then execute PI Seek.

PS (Program Service Name) (Default)

Frequency

Clock Time

[AF] (REG)

(AF Level/REG Mode)

[DISP]

(Display)

AF indicator

DISP

CQ-RDP383N

E N G

I S H

CQ-RDP383N

E N G

I S H

Traffic Announcement (TA)

Some RDS FM stations periodically provide traffic information.

Radio Data System (RDS) (continued)

POWER

PTY

CQ-RDP383N

DISP

TRACK

TUNE

MUTE

LOU

SCANSCROLLFOLDER/DISC REPEATRANDOM

APM

BAND

SRC

EON・PTY・CT

TA Mode (Default: OFF)

Press [TA] to switch TA mode on and off. If the station received is not a TP station, the unit automatically searches for a TP station to tune in to it. When the TP station received begins a traffic announcement, you can hear it from the unit.

TP Indicator lights up during reception of TP station.

TA Standby Mode

When set to TA on with the unit in another mode (CD, MP3/WMA, CD changer), it will automatically switch to radio mode and output the traffic announcement. When the traffic announcement has finished, the unit will return to the previous mode.

To listen to only traffic announcements

While listening to an FM station which is not currently broadcasting traffic announcement, turn the [VOLUME] to the counterclockwise to set the volume to 0. The traffic announcement will be output at the TA volume level.

Other TA functions

TA Volume Set: Press [SEL] to select the TA Volume mode. Turn the [SEL] change the each level. (a Page 24 for TA Volume Set.) TP Seek Tuning: When TA ON is selected, only TP station will be searched. Press and hold []] or [[] for more than 0.5 seconds, then release. Seeking will start. TP Auto Preset Memory: When TA ON is selected, only TP station will be memorized automatically. (a Page 9 for auto preset memory) TP Auto Search: When reception of a TP station becomes poor, TP Auto Search will automatically search for a TP station with better reception.

Program Type (PTY) Reception

RDS FM stations provide a program type identification signal. (Example: news, rock, classical music, etc.)

POWER

PTY

CQ-RDP383N

DISP

TRACK

TUNE

MUTE

SCANSCROLLFOLDER/DISC REPEATRANDOM

APM

BAND

SRC

EON・PTY・CT

Program Type (PTY) Mode

Press [PTY] to switch the PTY display mode on and off. The PTY function described below becomes enabled after selecting to the PTY mode.

PTY Selection

q Press [[] to change the program type as shown below.

([]] : opposite direction)

w Select the desired program type and press [BAND].

Seek will start to tune in to a station broadcasting the selected program type.

Press [BAND] again to cancel.

PTY display in Swedish

Press and hold [SEL] to open the PTY display language. Turn [SEL] to switch the language as follows.

(English)

(Swedish)

PTY Preset

PTY Preset Call

Program types are stored in memory under preset buttons from [1] to [6] as shown in the tables on the next page. To tune in the desired program type, press any of preset buttons from [1] to [6].

Preset PTY Search

q Select a program type by pressing the preset button.

The preset program type appears on the display for 5 seconds. Example: Press preset button [1].

w Press the same preset button again (or press [BAND])

to tune in the desired program type station. Example: Press preset button [1] again. Press [BAND] again to cancel.

Note: When there is no corresponding program type station, “NONE” is displayed for 2 seconds.

PTY Preset Change

q Select a program type by using PTY Selection or press-

ing PTY Preset buttons.

w Press and hold one of the buttons from [1] to [6] for

more than 2 seconds. Example: Press and hold preset button [2] for more than 2 seconds.

[TA] (TA Mode)

[]][[](TP Seek Tuning, Tune)

[PTY]

[]][[] (PTY Selection)

[BAND] (Preset PTY Search,

PTY Selection)

[1] to [6] (PTY Preset)

[VOLUME]

PTY

BAND

TA on indicator

PTY indicator

SPEECH / MUSIC / NEWS / AFFAIRS / INFO / SPORT / EDUCATE / DRAMA / CULTURE / SCIENCE / VARIED / POP_M / ROCK_M / EASY_M / LIGHT_M / CLASSICS / OTHER_M / WEATHER/ FINANCE / CHILDREN / SOCIAL / RELIGION / PHONE_IN / TRAVEL / LEISURE / JAZZ / COUNTRY / NATION_M / OLDIES / FOLK_M / DOCUMENT

+ 13 hidden pages