Panasonic CFW7DWBYZJM Operating Instruction

OPERATING INSTRUCTIONS

Personal Computer

Model No. CF-W7 series

Contents

Getting Started

Introduction.................................................2

Read Me First ..............................................3

Description of Parts .....................................11

First-time Operation .....................................13

Useful Information

On-screen Manual.......................................17

Handling and Maintenance .............................18

Getting StartedUseful InformationTroubleshootingAppendix

For further information about the com­puter, you can refer to the on-screen
manual.
To access the on-screen manual
 page 17 “On-screen Manual”

Expanding Memory......................................21

Hard Disk Backup/Restore Function ..................23

Hard Disk Data Erase Utility ...........................24

Reinstalling Software....................................25

Troubleshooting

Troubleshooting (Basic)/Error Code/Message.......27

Hardware Diagnostics...................................31

Appendix

LIMITED USE LICENSE AGREEMENT..............33

Specifications ............................................35

LIMITED WARRANTY ..................................38

For your technical support office, refer to
“LIMITED WARRANTY.”

Please read these instructions carefully before using this product and save this manual for future use.

Introduction

Thank you for purchasing this Panasonic computer. For optimum performance and safety, please read these instruc­tions carefully.

 Terms and illustrations in these instructions

CAUTION
NOTE

Enter
Fn

+ F5 : Press and hold [Fn] key, and then press [F5] key.

(Start) - [All Programs] : Click (Start), and then click [All Programs].

 : Page in these Operating Instructions.

 : Reference to the on-screen manuals.

 Some illustrations are simplified to help your understanding and may look different from the actual unit.
 If you do not log on as an administrator, you cannot use some functions or cannot display some screens.
 Refer for the latest information about optional products to the catalogs, etc.
 In these instructions, the names and terms are referred as follows.

• “Windows Vista

• “WinDVD™ 8 (OEM Version)” as “WinDVD”

• “B’s Recorder GOLD9 BASIC” as “B’s Recorder”

• “B’s CLiP 7” as “B’s CLiP”

Getting StartedUseful InformationTroubleshootingAppendix

 The display modes are referred as follows. ( ) indicates the terms in [Intel

mobile] screen. To display the screen, right-click the desktop and click [Graphics Properties].

• Internal LCD (Notebook): The computer’s display

• External display (Monitor): External display

• Simultaneous display (Intel (R) Dual Display Clone): The same screen is displayed on the internal LCD and the

• Extended Desktop: The extended working area across the internal LCD and the external display.

 Copyright

This manual is copyrighted by Matsushita Electric Industrial Co., Ltd. with all rights reserved. No part of this manual may
be reproduced in any form without the prior written permission of Matsushita Electric Industrial Co., Ltd.
No patent liability is assumed with respect to the use of the information contained herein.
© 2008 Matsushita Electric Industrial Co., Ltd. All Rights Reserved.

 Disclaimer

Computer specifications and manuals are subject to change without notice. Matsushita Electric Industrial Co., Ltd.
assumes no liability for damage incurred directly or indirectly from errors, omissions or discrepancies between the com­puter and the manuals.

 Trademarks

Microsoft
United States and/or other countries.
Intel, Core and Centrino are either registered trademarks or trademarks of Intel Corporation.

: Conditions that may result in minor or moderate injury.

: Useful and helpful information.

: Press [Enter] key.

®

Business with Service Pack 1” as “Windows” or “Windows Vista”

®

Graphics Media Accelerator Driver for

external display.

®

, Windows®, Windows Vista and the Windows logo are registered trademarks of Microsoft Corporation of the

SDHC Logo is a trademark.

Adobe, the Adobe logo and Adobe Reader are either registered trademarks or trademarks of Adobe Systems Incorpo­rated in the United States and/or other countries.
PhoenixBIOS, Phoenix Always and Recover Pro are trademarks and/or registered trademarks of Phoenix Technologies
Ltd.
Bluetooth™ is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed to Matsushita Electric Industrial Co., Ltd.
InterVideo, WinDVD™, the InterVideo logo, Ulead and the Corel logo are trademarks or registered trademarks of Corel
Corporation and/or its subsidiaries in Canada, the United States and/or other countries.

Computrace
Panasonic

Names of products, brands, etc., appearing in this manual are trademarks or registered trademarks of their respective
own companies.

®

is a registered trademark of Absolute® Software Corp.

®

is a registered trademark of Matsushita Electric Industrial Co., Ltd.

2

Read Me First

Models for U.S.A.

<Only for model with a “ ” mark on the bottom of the computer>
Federal Communications Commission Radio Fre­quency Interference Statement

Note: This equipment has been tested and found to com­ply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interfer­ence in a residential installation. This equipment gener­ates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television recep­tion, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and

receiver.

 Connect the equipment into an outlet on a circuit differ-

ent from that to which the receiver is connected.

 Consult the Panasonic Service Center or an experi-

enced radio/TV technician for help.

Warning

To assure continued compliance, use only shielded inter­face cables when connecting to a computer or peripheral.
Also, any changes or modifications not expressly
approved by the party responsible for compliance could
void the user’s authority to operate this equipment.

FCC RF Exposure Warning:
 This computer is provided with a PC Card slot that could

be used with wireless transmitter(s), which will be spe­cifically recommended, when they become available.
Other third-party wireless transmitter(s) have not been
RF exposure evaluated for use with this computer and
may not comply with FCC RF exposure requirements.

<Only for model with wireless LAN/Bluetooth>
 This equipment complies with FCC radiation exposure

limits set forth for an uncontrolled environment.

 This equipment must be installed and operated in

accordance with provided instructions and minimum

1.5 cm spacing must be provided between antenna
and all person’s body (excluding extremities of hands,
wrist and feet) during wireless modes of operation.

 This transmitter must not be co-located or operated in

conjunction with any other antenna or transmitter.

25-M-2-3

<Only for model with wireless LAN>
This product is restricted to indoor use due to its operation
in the 5.15 to 5.25 GHz frequency range.
FCC requires this product to be used indoors for the fre­quency range 5.15 to 5.25 GHz to reduce the potential for
harmful interference to co-channel Mobile Satellite sys­tems.
High power radars are allocated as primary users of the

5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These
radar stations can cause interference with and /or dam­age this product.

25-M-W-1

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and

This device must accept any interference received, includ-

(2)

ing interference that may cause undesired operation.

Responsible Party: Panasonic Corporation of North America

FCC Regulation Notice for modem
This equipment contains a FCC approved modem.

1. This equipment complies with CFR47 Part 68 rules.
On the computer is a label that contains, among other
information, the FCC registration number and ringer
equivalence number (REN) for this equipment. If
required, this information must be provided to the tele­phone company.

2. An FCC compliant telephone cord and modular plug is
provided with this equipment. This equipment is
designed to be connected to the telephone network or
premises wiring using a compatible modular jack
which is Part 68 compliant. See Installation Instruc­tions for details.

3. The REN is used to determine the quantity of devices
which may be connected to the telephone line. Exces­sive RENs on the telephone line may result in the
devices not ringing in response to an incoming call. In
most, but not all area, the sum of RENs should not
exceed five (5.0). To be certain of the number of
devices that may be connected to a line, as deter­mined by the total RENs, contact the local telephone
company.

4. If your telephone equipment cause harm to the tele­phone network, the telephone company will notify you
in advice that temporary discontinuance of service
may be required. But if advice notice isn’t practical, the
telephone company will notify the customer as soon as
possible. Also, you will be advised of your right to file a
complaint with the FCC if you believe it is necessary.

5. The telephone company may take changes in its facili­ties, equipment, operations or procedures that could
affect the operation of the equipment. If this happens
the telephone company will provide advance notice in
order for you to make necessary modifications to
maintain uninterrupted service.

6. If trouble is experienced with this equipment, for repair
or warranty information, please contact Panasonic
Corporation of North America at DIAL TOLL FREE 1­800-LAPTOP5 (1-800-527-8675). If the equipment is
causing harm to the telephone network, the telephone
company may request that you disconnect the equip­ment until the problem is resolved.

7. There are no user serviceable parts contained in this
equipment.

One Panasonic Way
Secaucus, NJ 07094
Tel No:1-800-LAPTOP5 (1-800-527-8675)

6-M-1

Getting StartedUseful InformationTroubleshootingAppendix

3

Read Me First

8. This equipment may not be used on coin service pro­vided by the telephone company. Connection to party
lines is subject to state tariffs.

9. The Telephone Consumer Protection Act of 1991
makes it unlawful for any person to use a computer or
other electronic device to send any message via a
telephone fax machine unless such message clearly
contains in a margin at the top or bottom of each trans­mitted page or on the first page of the transmission,
the date and time it is sent and an identification of the
business or other entry, or other individual sending the
message and the telephone number of the sending
machine or such business, other entity, or individual. In
order to program this information into your fax soft­ware, you should refer to the manual of the Fax soft­ware being used.

10.According to the FCC’s electrical safety advisory, we
recommend that you may install an AC surge arrestor
in the AC outlet to which this equipment is connected.
Telephone companies report that electrical surges,
typically lightning transients, are very destructive to

Getting StartedUseful InformationTroubleshootingAppendix

customer terminal equipment connected to AC power
sources and that this is a major nationwide problem.

“Caution : To reduce the risk of fire, use only No.26 AWG or
larger telecommunication line cord.”
“ATTENTION : Pour réduire le risque d’incendie, utiliser
uniquement des conducteurs de télécommunications 26
AWG ou de section supérieure.”

16-M-1

Notice for the products using LCD

This product has a fluorescent lamp that contains mer­cury. Disposal may be regulated in your community due to
environmental considerations.
For disposal or recycling information, please contact your
local authorities, or the Electronic Industries Alliance:
<http://www.eiae.org/>

<For USA-California Only>
This product contains a CR Coin Cell Lithium Battery
which contains Perchlorate Material- special handling
may apply.
See http://www.dtsc.ca.gov/hazardouswaste/perchlorate/

24-M-1

38-M-1

4

Models for Canada

Industry Canada (IC) Notice for modem

This equipment contains an Industry Canada approved
modem unit.
The Industry Canada label is affixed on the modem unit.

EQUIPMENT ATTACHEMENT LIMITATIONS

“NOTICE: The Industry Canada label identifies certified equip­ment. This certification means that the equipment meets tele­communications network protective, operational and safety
requirements as prescribed in the appropriate Terminal Equip­ment Technical Requirements document(s). The Department
does not guarantee the equipment will operate to the user’s
satisfaction.
Before installing this equipment, users should ensure that it is
permissible to be connected to the facilities of the local tele­communications company. The equipment must also be
installed using an acceptable method of connection. The cus­tomer should be aware that compliance with the above condi­tions may not prevent degradation of service in some
situations.
Repairs to certified equipment should be coordinated by a rep­resentative designated by the supplier. Any repairs or alter­ations made by the user to this equipment, or equipment
malfunctions, may give the telecommunications company
cause to request the user to disconnect the equipment.
Users should ensure for their own protection that the electrical
ground connections of the power utility, telephone lines and
internal metallic water pipe system, if present, are connected
together. This precaution may be particularly important in rural
areas. Caution: Users should not attempt to make such con­nections themselves, but should contact the appropriate elec­tric inspection authority, or electrician, as appropriate.”
“NOTICE: The Ringer Equivalence Number (REN) assigned to
each terminal device provides an indication of the maximum
number of terminals allowed to be connected to a telephone
interface. The termination on an interface may consist of any
combination of devices subject only to the requirement that the
sum of the Ringer Equivalence Numbers of all the devices
does not exceed 5.”

REN: See bottom of the computer

RESTRICTIONS CONCERNANT LE RACCORDEMENT
DE MATÉRIEL

“AVIS: L’étiquette d’Industrie Canada identifie le matériel
homologué. Cette étiquette certifie que le matériel est con­forme aux normes de protection, d’exploitation et de sécurité
des réseaux de télécommunications, comme le prescrivent les
documents concernant les exigences techniques relatives au
matériel terminal. Le Ministère n’assure toutefois pas que le
matériel fonctionnera à la satisfaction de l’utilisateur.
Avant d’installer ce matériel, l’utilisateur doit s’assurer qu’il est
permis de le raccorder aux installations de l’entreprise locale
de télécommunication. Le matériel doit également être installé
en suivant une méthode acceptée de raccordement.
L’abonné ne doit pas oublier qu’il est possible que la confor­mité aux conditions énoncées ci-dessus n’empêche pas la
dégradation du service dans certaines situations.
Les réparations de matériel homologué doivent être coordon­nées par un représentant désigné par le fournisseur.
L’entreprise de télécommunications peut demander à l’utili­sateur de débrancher un appareil à la suite de réparations ou
de modifications effectuées par l’utilisateur ou à cause de
mauvais fonctionnement.
Pour sa propre protection, l’utilisateur doit s’assurer que tous
les fils de mise à la terre de la source d’énergie électrique, des
lignes téléphoniques et des canalisations d’eau métalliques,
s’il y en a, sont raccordés ensemble. Cette précaution est par­ticulièrement importante dans les régions rurales. Avertisse­ment: L’utilisateur ne doit pas tenter de faire ces
raccordements lui-même; il doit avoir recours à un service
d’inspection des installations électriques, ou à un électricien,
selon le cas.”
“AVIS: L’indice d’équivalence de la sonnerie (IES) assigné à
chaque dispositif terminal indique le nombre maximal de ter­minaux qui peuvent être raccordés à une interface. La termi­naison d’une interface téléphonique peut consister en une
combinaison de quelques dispositifs, à la seule condition que
la somme d’indices d’équivalence de la sonnerie de touts les
dispositifs n’excède pas 5.”

IES: Voir sous le fond de l’ordinateur

17-Ca-1

Getting StartedUseful InformationTroubleshootingAppendix

Canadian ICES-003

This Class B digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.

<Only for model with wireless LAN/Bluetooth>

Industry Canada

This product complies with RSS210 Industry Canada.
Operation is subject to the following two conditions;
(1) this device may not cause interference, and
(2) this device must accept any interference, including

interference that may cause undesired operation of
the device.

7-M-2

30-Ca-1-1

<Only for model with wireless LAN>
This product (local network devices) for the band 5150­5250 MHz is only indoor usage to reduce potential for
harmful interference to co-channel Mobile Satellite sys­tems.
High power radars are allocated as primary users (mean­ing they have priority) of 5250-5350 MHz and 5650-5850
MHz and these radars could cause interference and/or
damage to LELAN devices.

30-Ca-2-1

5

Read Me First

Models for Europe

<Only for model with a “CE” mark on the bottom of the computer>

Declaration of Conformity (DoC)

“Hereby, we declare that this Personal Computer is in compliance with the essential requirements
and other relevant provisions of the Directive 1999/5/EC.”
Hint:
If you want to get a copy of the original DoC of our products which relates to the R&TTE, please con­tact our web address: http://www.doc.panasonic.de

Contact and Pursuant to at the directive 2004/108/EC, article 9(2)
Panasonic Testing Centre
Panasonic Service Europe, a division of
Panasonic Marketing Europe GmbH
Winsbergring 15, 22525 Hamburg, Germany

Network connection.
The terminal equipment is intended for connection to the following public network;
In all the countries of European Economical Area;

Getting StartedUseful InformationTroubleshootingAppendix

- Public Switched Telephony Networks

Technical Features.
The terminal equipment includes the following features;

- DTMF dialing

- Maximum bitrate receiving mode: 56 kbit/s

- Maximum bitrate sending mode: 33.6 kbit/s

Important Safety Instructions / Importantes Mesures De Sécurité

When using your telephone equipment, basic safety pre­cautions should always be followed to reduce the risk of
fire, electric shock and injury to persons, including the fol­lowing:

1. Do not use this product near water, for example, near
a bath tub, wash bowl, kitchen sink or laundry tub, in a
wet basement or near a swimming pool.

2. Avoid using a telephone (other than a cordless type)
during an electrical storm. There may be a remote risk
of electric shock from lightning.

3. Do not use the telephone to report a gas leak in the
vicinity of the leak.

4. Use only the power cord and batteries indicated in this
manual. Do not dispose of batteries in a fire. They may
explode. Check with local codes for possible special
disposal instructions.

SAVE THESE INSTRUCTIONS

19-E-1

Certaines mesures de sécurité doivent être prises pen­dant l’utilisation de matérial téléphonique afin de réduire
les risques d’incendie, de choc électrique et de blessures.
En voici quelquesunes:

1. Ne pas utiliser l’appareil près de l’eau, p.ex., près d’une
baignoire, d’un lavabo, d’un évier de cuisine, d’un bac à
laver, dans un sous-sol humide ou près d’une piscine.

2. Éviter d’utiliser le téléphone (sauf s’il s’agit d’un appareil
sans fil) pendant un orage électrique. Ceci peut présenter
un risque de choc électrique causé par la foudre.

3. Ne pas utiliser l’appareil téléphonique pour signaler
une fuite de gaz s’il est situé près de la fuite.

4. Utiliser seulement le cordon d’alimentation et le type de
piles indiqués dans ce manual. Ne pas jeter les piles
dans le feu: elles peuvent exploser. Se conformer aux
règlements pertinents quant à l’élimination des piles.

CONSERVER CES INSTRUCTIONS

18-E-1

19-F-1

6

Information to the User / Informations destinées aux utilisateurs

<Only for model with wireless LAN/Bluetooth>

This product and your Health

This product, like other radio devices, emits radio fre­quency electromagnetic energy. The level of energy emit­ted by this product however is far much less than the
electromagnetic energy emitted by wireless devices like
for example mobile phones.
Because this product operates within the guidelines found
in radio frequency safety standards and recommenda­tions, we believe this product is safe for use by consum­ers. These standards and recommendations reflect the
consensus of the scientific community and result from
deliberations of panels and committees of scientists who
continually review and interpret the extensive research lit­erature.
In some situations or environments, the use of this prod­uct may be restricted by the proprietor of the building or
responsible representatives of the organization. These sit­uations may for example include:

 Using this product on board of airplanes, or
 In any other environment where the risk of interference

to other devices or services is perceived or identified

as harmful.
If you are uncertain of the policy that applies on the use of
wireless devices in a specific organization or environment
(e.g. airports), you are encouraged to ask for authoriza­tion to use this product prior to turning on the product.

Regulatory Information

We are not responsible for any radio or television interfer­ence caused by unauthorized modification of this product.
The correction of interference caused by such unautho­rized modification will be the responsibility of the user. We
and its authorized resellers or distributors are not liable for
damage or violation of government regulations that may
arise from failing to comply with these guidelines.

26-M-1

<Uniquement les modèles avec réseau local sans fil et/ou
Bluetooth>

Ce produit et votre santé

Ce produit, comme tout autre appareil radio, émet de
l’énergie radioélectrique. Toutefois, la quantité d’énergie
émise par ce produit est beaucoup moins importante que
l’énergie radioélectrique émise par des appareils sans fil
tels que les téléphones portables. L’utilisation de ce pro­duit ne comporte aucun risque pour le consommateur du
fait que cet appareil opère dans les limites des directives
concernant les normes et les recommandations de sécu­rité sur les fréquences radio. Ces normes et recomman­dations reflètent le consensus de la communauté
scientifique et résultent de délibérations de jurys et
comités de scientifiques qui examinent et interprètent
continuellement les nouveautés de la vaste littérature sur
les recherches effectuées. Dans certaines situations ou
environnements, l’utilisation de ce produit peut être restre­inte par le propriétaire du bâtiment ou par les représen­tants responsables de l’organisation. Ces situations
peuvent être les suivantes par exemple :

 A bord d’un avion, ou
 Dans tout autre environnement où les risques d’inter-

férence sur d’autres appareils ou services sont perçus

ou identifiables comme dangereux.
Si vous n’êtes pas sûr de la réglementation applicable à
l’utilisation d’appareils sans fil dans une organisation ou
un environnement spécifique, (par exemple dans un
aéroport) nous vous invitons à demander l’autorisation
d’utiliser ce produit avant sa mise en marche.

Informations concernant la réglementation

Nous déclinons toute responsabilité pour toute inter­férence radio ou télévision causée par des modifications
non autorisées apportées à ce produit. La correction
d’interférences causées par de telles modifications non
autorisées sera la seule responsabilité de son utilisateur.
Nousmêmes, les revendeurs officiels et les distributeurs
ne sommes pas responsable de tout dégât ou de toute
violation des règlements de l’État pouvant découler du
non-respect de ces directives.

26-F-1

Getting StartedUseful InformationTroubleshootingAppendix

Lithium Battery / Pile au lithium

Lithium Battery!

This computer contains a lithium battery to enable the
date, time, and other data to be stored. The battery should
only be exchanged by authorized service personnel.
Warning! A risk of explosion from incorrect installation or
misapplication may possibly occur.

15-E-1

Pile au lithium!

Le micro-ordinateur renferme une pile au lithium qui per­met de sauvegarder certaines données, notamment la
date et l’heure. La pile ne doit être remplacée que par un
technicien qualifié.
Danger ! Risque d’explosion en cas de non respect de
cette mise en garde!

15-F-1

7

Read Me First

CD/DVD Drive Caution

CAUTION!

THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS, ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.
REFER SERVICING TO QUALIFIED PERSONNEL.

12-E-1

AVERTISSEMENT!

CET APPAREIL UTILISE UN LASER.
L’UTILISATION DE COMMANDES OU DE RÉGLAGES OU L’EXÉCU­TION DE PROCÉDURES AUTRES QUE CELLES SPÉCIFIÉES ICI PEU­VENT PROVOQUER UNE EXPOSITION À DES RADIATIONS
DANGEREUSES.
NE PAS OUVRIR LES COUVERCLES NI ESSAYER DE RÉPARER
SOIMÊME.
CONFIER TOUT TRAVAIL D’ENTRETIEN À UN PERSONNEL QUALIFIÉ.

12-F-1

Information on Disposal in other Countries outside the European Union

12-1-1

Getting StartedUseful InformationTroubleshootingAppendix

These symbols are only valid in the European Union.
If you wish to discard this product, please contact your local authorities or dealer and ask
for the correct method of disposal.

Precautions

THIS PRODUCT IS NOT INTENDED FOR USE AS, OR AS
PART OF, NUCLEAR EQUIPMENT/SYSTEMS, AIR TRAF­FIC CONTROL EQUIPMENT/SYSTEMS, OR AIRCRAFT
COCKPIT EQUIPMENT/SYSTEMS
NOT BE RESPONSIBLE FOR ANY LIABILITY RESULTING
FROM THE USE OF THIS PRODUCT ARISING OUT OF
THE FOREGOING USES.

*1

AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS include Class2
Electrical Flight Bag (EFB) Systems and Class1 EFB Systems
when used during critical phases of flight (e.g., during take-off and
landing) and/or mounted on to the aircraft. Class1 EFB Systems
and 2 EFB Systems are defined by FAA: AC (Advisory Circular)
120-76A or JAA: JAA TGL (Temporary Guidance Leaflets) No.36.

Panasonic cannot guarantee any specifications, tech­nologies, reliability, safety (e.g. Flammability/Smoke/
Toxicity/Radio Frequency Emission, etc) requirements
related to aviation standards that exceed the specifica­tions of our COTS (Commercial-Off-The-Shelf) products.

This computer is not intended for use in medical equip­ment including life-support systems, air traffic control sys­tems, or other equipment, devices or systems that are
involved with ensuring human life or safety. Panasonic
cannot be held responsible in any way for any damages
or loss resulting from the use of this computer in these
types of equipment, devices or systems, etc.

*1

. PANASONIC WILL

39-E-1

53-M-1

If a Malfunction Occurs, Immediately Unplug the AC
Plug and the Battery Pack

• This product is damaged

• Foreign object inside this product

• Smoke emitted

• Unusual smell emitted

• Unusually hot
Continuing to use this product while any of the above con­ditions are present may result in fire or electric shock.

f a malfunction occurs, immediately turn the power off and

•I

unplug the AC plug, and then remove the battery pack.
Then contact your technical support office.

Do Not Touch This Product and Cable When It Starts
Thundering

Electric shock may result.

Do Not Connect the AC Adaptor to a Power Source
Other Than a Standard Household AC Outlet

Otherwise, a fire due to overheating may result. Connect­ing to a DC/AC converter (inverter) may damage the AC
adaptor. On an airplane, only connect the AC adaptor/
charger to an AC outlet specifically approved for such use.

Do Not Do Anything That May Damage the AC Cord,
the AC Plug, or the AC Adaptor

Do not damage or modify the cord, place it near hot tools, bend,
twist, or pull it forcefully, place heavy objects on it, or bundle it tightly.
Continuing to use a damaged cord may result in fire, short circuit, or
electric shock.

8

Do Not Pull or Insert the AC Plug If Your Hands Are Wet

Electric shock may result.

Clean Dust and Other Debris of the AC Plug Regularly

If dust or other debris accumulates on the plug, humidity, etc.
may cause a defect in the insulation, which may result in a fire.

• Pull the plug, and wipe it with a dry cloth.
Pull the plug if the computer is not being used for a long
period of time.

Insert the AC Plug Completely

If the plug is not inserted completely, fire due to overheat­ing or electric shock may result.

• Do not use a damaged plug or loose AC outlet.

Do Not Place Containers of Liquid or Metal Objects on
Top of this Product

If water or other liquid spills, or if paper clips, coins, or foreign
matter get inside this product, fire or electric shock may result.

• If water spills in the keyboard, refer to page 20. If other for­eign matter has found its way inside, immediately turn the
power off and unplug the AC plug and remove the battery
pack. Then contact your technical support office.

Do Not Disassemble This Product

There are high-voltage areas inside which may give you
an electric shock if you should touch them. Do not touch
the pins and circuit boards inside, and do not allow foreign
matter to enter inside.
Also, remodeling or disassembly may cause a fire.

Keep SD Memory Cards Away from Infants and Small
Children

Accidental swallowing will result in bodily injury.

• In the event of accidental swallowing, see a doctor immedi­ately.

Do Not Place This Product on Unstable Surfaces

If balance is lost, this product may fall over or drop, result­ing in an injury.

Avoid Stacking

If balance is lost, this product may fall over or drop, result­ing in an injury.

Do Not Keep This Product Wherever There is a Lot of
Water, Moisture, Steam, Dust, Oily Vapors, etc.

Otherwise, possibly resulting in fire or electric shock.

Do Not Leave This Product in High Temperature Envi­ronment for a Long Period of Time

Leaving this product where it will be exposed to extremely
high temperatures such as near fire or in direct sunlight may
deform the cabinet and/or cause trouble in the internal
parts. Continued use in such a resulting condition may lead
to short-circuiting or insulation defects, etc. which may in
turn lead to a fire or electric shocks.

Do Not Block the Ventilation Hole

Otherwise, heat will build up inside, possibly resulting in a
fire.

Hold the Plug When Unplugging the AC Plug

Pulling on the cord may damage the cord, resulting in a
fire or electric shock.

Do Not Move This Product While the AC Plug Is Connected

The AC cord may be damaged, resulting in fire or electric shock.

• If the AC cord is damaged, unplug the AC plug immediately.

Use Only the Specified AC Adaptor With This Product

Using an AC adaptor other than the one supplied
(attached to your product or supplied by Panasonic) may
result in a fire.

Do Not Subject the AC Adaptor to Any Strong Impact

Using the AC adaptor after a strong impact such as being
dropped may result in electric shock, short circuit, or fire.

Take a Break of 10-15 Minutes Every Hour

Using this product for long periods of time may have detri­mental health effects on the eyes or hands.

Do Not Look into the CD/DVD Drive

Looking directly at the internal laser light source may
result in damage to eyesight.

Do Not Use Discs That Are Cracked or Deformed

Because the discs rotate at high speeds, damaged discs
may break apart causing injury.

• Discs that are not round and discs that have been
repaired using adhesives are similarly dangerous, and
so should not be used.

Do Not Turn the Volume Up to Loud When Using
Headphones

Listening at high volumes that overstimulate the ear for
long periods of time may result in loss of hearing.

Use the Modem with a Regular Telephone Line

Connection to an internal phone line (on-premise
switches) of a company or business office, etc. or to a dig­ital public phone or use in a country or area not supported
by the computer may result in a fire or electric shocks.

Do Not Connect a Telephone Line, or a Network Cable
Other Than the One Specified, into the LAN Port

If the LAN port is connected to a network such as the
ones listed below, a fire or electric shock may result.

• Networks other than 1000BASE-T, 100BASE-TX or
10BASE-T

• Phone lines (IP phone (Internet Protocol Telephone),
Telephone lines, internal phone lines (on-premise
switches), digital public phones, etc.)

Do Not Use with Exposing the Skin to This Product
for a Long Period of Time

Using this product with exposing the skin to the heat
source of this product or AC adaptor for a long period of
time can cause a low-temperature burn.

 Do not place the computer near a television or radio

receiver.

 Keep the computer away from magnets. Data stored

on the hard disk may be lost.

Getting StartedUseful InformationTroubleshootingAppendix

9

Read Me First

Precautions (Battery Pack)

Do Not Use with Any Other Product

The battery pack is rechargeable and was intended for
the specified product. If it is used with a product other
than the one for which it was designed, electrolyte leak­age, generation of heat, ignition or rupture may result.

Do Not Charge the Battery Using Methods Other Than
Those Specified

If the battery pack is not charged using one of the speci­fied methods, electrolyte leakage, generation of heat, igni­tion or rupture may result.

Do Not Throw the Battery Pack into a Fire or Expose It
to Excessive Heat

Generation of heat, ignition or rupture may result.

Avoid Extreme Heat (Near the Fire, in Direct Sunlight,

Getting StartedUseful InformationTroubleshootingAppendix

for Example)

Electrolyte leakage, generation of heat, ignition or rupture
may result.

Do Not Insert Sharp Objects into the Battery Pack,
Expose It to Bumps or Shocks, Disassemble, or Mod­ify It

Electrolyte leakage, generation of heat, ignition or rupture
may result.

• If this product is subjected to a strong impact, stop using it
immediately.

Do Not Short the Positive (+) and Negative (-) Contacts

Generation of heat, ignition or rupture may result.

• Do not place the battery pack together with articles such as
necklaces or hairpins when carrying or storing.

Do Not Use This Product with a Battery Pack Other
Than the One Specified

Use only the specified battery pack (CF-VZSU51W/CF­VZSU52W) with your product. Use of battery packs other
than those manufactured and supplied by Panasonic may
present a safety hazard (generation of heat, ignition or
rupture).
 Do not touch the terminals on the battery pack. The

battery pack may no longer function properly if the
contacts are dirty or damaged.

 Do not expose the battery pack to water, or allow it to

become wet.

 If the battery pack will not be used for a long period of

time (a month or more), charge or discharge (use) the
battery pack until the remaining battery level becomes
30% to 40% and store it in a cool, dry place.

 This computer prevents overcharging of the battery by

recharging only when the remaining power is less than
approx. 95% (when Economy Mode (ECO) is enabled:
75%) of capacity.

 The battery pack is not charged when the computer is

first purchased. Be sure to charge it before using it for
the first time. When the AC adaptor is connected to the
computer, charging begins automatically.

 Should the battery leak and the fluid get into your

eyes, do not rub your eyes. Immediately flush your
eyes with clear water and see a doctor for medical
treatment as soon as possible.

NOTE

 The battery pack may become warm during

recharging or normal use. This is completely nor­mal.

 Recharging will not commence if internal tempera-

ture of the battery pack is outside of the allowable
temperature range (0 °C to 55 °C {32 °F to 131

°F}). ( Reference Manual “Battery Power”)
Once the allowable range requirement is satisfied,
charging begins automatically. Note that the
recharging time varies based on the usage condi­tions. (Recharging takes longer than usual when
the temperature is 10 °C {50 °F} or below.)

 In high-temperature environments, the battery

takes longer to fully recharge. In low-temperature
environments, the battery takes longer to fully
recharge and the operating time is shorter. Only
use the computer within the allowable temperature
range.

 The battery pack is a consumable item. If the

amount of time the computer can be run by using a
particular battery pack becomes dramatically
shorter and repeated recharging does not restore
its performance, the battery pack should be
replaced with a new one.

 When transporting a spare battery inside a pack-

age, briefcase, etc., it is recommended that it be
placed in a plastic bag so that its contacts are pro­tected.

 Always power off the computer when it is not in

use. Leaving the computer on when the AC adap­tor is not connected will exhaust the remaining bat­tery capacity.

A lithium ion battery that is recy­clable powers the product you
have purchased.
Please call 1-800-8-BATTERY
for information on how to recycle
this battery.

L’appareil que vous vous êtes
procuré est alimenté par une bat­terie au lithium-ion.
Pour des renseignements sur le
recyclage de la batterie, veuillez
composer le 1-800-8-BATTERY.

48-M-1

10

Description of Parts

A
B

C
D

E
F
G
H

A :Function Key

 Reference Manual “Key Combinations”

B :Keyboard
C :Touch Pad

 Reference Manual “Using the Touch Pad”

D :Bluetooth Antenna

<Only for model with Bluetooth>
 Supplementary Instructions of Bluetooth

E : Wireless LAN Antenna

<Only for model with wireless LAN>
 Reference Manual “Wireless LAN”

F : Power Switch

 page 14

Power Indicator

• Off: Power off/Hibernation

• Green: Power on

• Blinking green: Sleep

G :Wireless Switch

Switch the wireless devices to on (right side) or to off (left side).
<Only for model with wireless LAN/Bluetooth>

 Reference Manual “Disabling/Enabling Wire-

less Communication”

H :LED Indicator

: SD/SDHC Memory Card status
: Caps lock
: Numeric key (NumLk)
: Scroll lock (ScrLk)
: Hard disk drive status

ECO

: Economy Mode (ECO) status

 Reference Manual “Battery Power”

: Battery status

 Reference Manual “Battery Power”

: CD/DVD drive status

• Off: Drive power is off.

• Green: Drive power is on, but the drive is not
accessed.

• Blinking green: Drive power is on, and the
drive is being accessed.

I

J

K
L

M
N
E

I : LCD
J : Security Lock

You can connect a Kensington cable. Refer to the instruc­tion manual of the cable. The security lock and cable is a
theft prevention device. Matsushita Electric Industrial Co.,

Ltd. will bear no responsibility in the event of theft.

K :Modem Port

• Be sure to use the included modem telephone cable,
and insert the ferrite core side of modem telephone

cable into the modem port on the computer

• Do not move/remove the ferrite core of modem tele­phone cable.

90 mm {3.5 "} or less

 Reference Manual “Modem”

L : LAN Port

If the Mini Port Replicator is connected to the computer,
connect the LAN cable to the LAN port on the Mini Port
Replicator. You cannot use the LAN port on the computer.

 Reference Manual “LAN”

M :USB Ports

 Reference Manual “USB Devices”

N :CD/DVD Drive

 Reference Manual “CD/DVD Drive”

CAUTION

When closing the disc
cover, press down the disc
cover (position of the
arrow) to ensure that the
cover is locked.

.

Getting StartedUseful InformationTroubleshootingAppendix

11

Description of Parts

A
B

':6

C
D
E
F

Getting StartedUseful InformationTroubleshootingAppendix

A :DC-IN Jack
B :External Display Port

If the Mini Port Replicator is connected to the com­puter, connect the external display to the external dis­play port on the Mini Port Replicator. You cannot use
the external display port on the computer.

 Reference Manual “External Display”

C :Mini Port Replicator Connector

Connect the Mini Port Replicator (optional).
 Reference Manual “Mini Port Replicator”

D :Ventilation Hole
E : PC Card Slot

 Reference Manual “PC Cards”

F : SD Memory Card Slot

 Reference Manual “SD/SDHC Memory Card”

G :CD/DVD Drive Power/Open Switch

• Slide the switch to the right to open the disc cover.

• Slide the switch to the left to turn on/off the drive power.

G

H

I

J

K

H :Microphone Jack

A condenser microphone can be used. If other types
of microphones are used, audio input may not be pos­sible, or malfunctions may occur.

I : Headphone Jack

You can connect headphones or amplified speakers.
When they are connected, audio from the internal
speakers is not heard.

J : Battery Latches

 page 13

K :Battery Pack

The battery pack is a consumable item. If you continue
to use a battery pack after it has degraded, problems
may occur. Be sure to replace the degraded battery
pack with a new battery pack of the specified type.

 page 13
 Reference Manual “Battery Power”

L : RAM Module Slot

 page 21

M :Speaker
N :Emergency Hole

 Reference Manual “CD/DVD Drive”

L

M

N

12

First-time Operation

 Preparation

A Check and identify the supplied accessories.

If you do not find the described accessories, contact your technical support office.

• AC Adaptor . . . .1

• AC Cord . . . . . . 1 • Battery Pack . . .1

• Modem Telephone Cable . . . 1

Model No: CF-AA1633A

• Operating Instructions (This book) . . 1

• Product Recovery DVD-ROM Windows

®

Business SP 1 . . . . . . . . . . . . . 1

Vista

 You will need the serial number when you reinstall B’s Recorder or install B’s CLiP ( page 29).

B Read the LIMITED USE LICENSE AGREEMENT before breaking the seal on the computer’s packaging

( page 33).

1

Battery
Latches

1 Insert the battery pack.

Slide the battery pack in parallel with the arrow direction and attach it so that the
left and right projections on the new battery pack match the dents of the com­puter.
In case that the projection does not match the dents of the computer, detach the
battery pack once, then slide it while pushing it lightly to avoid floating.
 To r em ov e

Slide both the left and right latches to the unlocked
position, and push out the battery pack in parallel with
the computer.

Model No: CF-VZSU51W

• Windows

• Product Recovery DVD-ROM Windows

Professional SP 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

®

Book . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

®

XP

Getting StartedUseful InformationTroubleshootingAppendix

CAUTION

 Make sure the latches are securely locked. Otherwise the battery pack may fall

when you carry the computer.

 Do not touch the terminals of the battery pack and the computer. Doing so can

make the terminals dirty or damaged, and may cause malfunction of the battery
pack and the computer.

2

A

2 Open the display.

Hold the side of the computer with either of your hands and then hold and lift the
A part to open the display.

CAUTION

 Do not open the display wider than necessary (140° or more), and do not apply

excessive pressure to the LCD. Do not open or close the computer holding the
edge of the LCD segment.

13

First-time Operation

3

4

Getting StartedUseful InformationTroubleshootingAppendix

3 Connect your computer to a power outlet.

The battery charging starts automatically.

CAUTION

 Do not disconnect the AC adaptor and do not switch the wireless switch to

on until the first-time operation procedure is completed.

 When using the computer for the first time, do not connect any peripheral device

except the battery pack and AC adaptor.

 Handling the AC adaptor

• Problems such as sudden voltage drops may arise during periods of thunder and
lightning. Since this could adversely affect your computer, an uninterruptible power
source (UPS) is highly recommended unless running from the battery pack alone.

4 Turn on the computer.

Slide and hold the power switch for approximately one second until the
power indicator lights.

It takes approximately 10 minutes until the Windows setup screen appears. Do not
touch the keys and touch pad until it appears.

CAUTION

 Do not slide the power switch repeatedly.
 The computer will forcibly be turned off if you slide and hold the power switch for

four seconds or longer.

 Once you turn off the computer, wait for ten seconds or more before you turn on

the computer again.



Do not perform the following operation until the hard disk drive indicator turns off.

• Connecting or disconnecting the AC adaptor

• Sliding the power switch or CD/DVD drive power/open switch

• Touching the keyboard or touch pad

• Closing the display

 Do not change the Setup Utility until completing step 5. If you do so, Windows

setup may not operate properly.

5 Setup Windows.

Follow the on-screen instructions.
 After turning on the computer, “Please wait while windows sets up your com-

puter” appears, and then a small circle circulates on the screen. This will take
a few minutes.

 During setup of Windows, use the touch pad to move the cursor and to click

an item.

 Do not change the settings on the screen where you select a country or

region. You can set a country, region or keyboard layout in [Clock, Language,
and Region] of [Control Panel] after the Windows setup is complete.

 Setup of Windows will take approximately 20 minutes.

Go to the next step, confirming each message on the display.

CAUTION

 Do not turn off the computer until completing the first-time operation procedure.
 You cannot choose the following words for user name and password: CON,

PRN, AUX, CLOCK$, NUL, COM1 to COM9, LPT1 to LPT9.

 You can change the user name, password, image and security setting after

setup of Windows.

 Remember your password. If you forget the password, you cannot use the Win-

dows. Creating a password reset disk beforehand is recommended.

6 Change the internal CD/DVD drive letter if necessary.

 Reference Manual “CD/DVD Drive”

14