Panasonic CFM34UHFZKM Operating Instruction

Personal Computer

OPERATING INSTRUCTIONS

Model No. CF-M34 Series

Contents

Getting Started

Read Me First.................................................. 3

First-time Operation ........................................ 9

®

2000 XP

[Additional Manual]

Reference Manual

This manual can be accessed on your computer. Refer
to page 18 on how to access the Reference Manual.

In this manual, descriptions are given us­ing illustrations not featuring the hand
strap for convenience of explanation.

Reference Manual

• Key Combinations

• LED Indicators

Operation

Starting Up/Shutting Down............................14

Touch Pad (Basic Operation) ............................. 17

Reference Manual .........................................18

Reference Manual

• T ouch P ad (Advanced)

• Touchscreen

• Standby/Hibernation

Functions

• Security Measures

• Computing on the

Road

• Battery Power

• PC Cards

• RAM Module

• Port Replicator

• External Display

• USB Devices

• Modem

• LAN

• Accessories

• Hard Disk Drive

• Setup Utility

Troubleshooting

List of Error Codes .........................................19

Dealing with Problems (Summary)...................21

Reinstalling Software ....................................24

Reference Manual

• T echnical Information

• DMI View er

• List of Error Codes

• Dealing with Problems

(Advanced)

Appendix

LIMITED USE LICENSE AGREEMENT........26

Names and Functions of Parts...................... 28

Specifications................................................29

LIMITED WARRANTY...................................30

Please read these instructions carefully before using this product and save this manual for future use.

Appendix Getting StartedOperationTroubleshooting

Customer's Record

Model No.*

Serial No.

or
Code No.

Date of Purchase

* For the Model No., insert the 12 digit number (for example, CF-M34RHFZQM) located on

the bottom of the computer.

Introduction

Thank you for purchasing the Panasonic computer. Read the operating instructions thoroughly for proper operation of your new
computer.

Illustrations in this Manual

Getting Started

NOTE: NOTE provides a useful fact or helpful information.
CAUTION: CAUTION indicates a condition that may result in minor or moderate injury.
WARNING: WARNING indicates a hazard that may result in moderate or serious injury.

[Start]-[Run]: This illustration means to click [Start], then to click [Run].

(For some applications, you may need to double-click.)

Enter : This illustration means to press the [Enter] key.
Fn + F5 : This illustration means to press and hold the [Fn] key, then press the [F5] key.

Windows 2000 : Information for Microsoft® Windows® 2000 Professional users.
Windows XP : Information for Microsoft® Windows® XP Professional users.

: Where to go for referred information.

: This illustration means to refer to the Reference Manual, which is available on your computer.

Refer to page 18 on how to access this manual.
Some of the illustrations in this manual may differ slightly in shape from the actual items in order to make the explana­tion easier to understand.
If the user has logged on without administrator authority, some functions may not be executable, and some screens may be
not displayed as shown in this manual. If this happens, log on with Administrator authority to enable these functions.

Dealer's Name

Dealer's Address

Copyright

This manual is copyrighted by Matsushita Electric Industrial Co., Ltd. with all rights reserved. No part of this manual may be
reproduced in any form without the prior written permission of Matsushita Electric Industrial Co., Ltd.
No patent liability is assumed with respect to the use of the information contained herein.

©2002 Matsushita Electric Industrial Co., Ltd. All Rights Reserved.

Disclaimer

Computer specifications and manuals are subject to change without notice. Matsushita Electric Industrial Co., Ltd. assumes no
liability for damage incurred directly or indirectly from errors, omissions or discrepancies between the computer and the manuals.

Trademarks

Microsoft® and Windows® are registered trademarks of Microsoft Corporation of the United States and/or other countries.
PS/2® is a registered trademark of International Business Machines Corporation.
Intel, Pentium and SpeedStep™ are either registered trademarks or trademarks of Intel Corporation.
Adobe® and Acrobat® are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or
other countries.
Panasonic is a registered trademark of Matsushita Electric Industrial Co., Ltd.

2

Read Me First

For U.S.A.

Federal Communications Commission Radio
Frequency Interference Statement

Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the Panasonic Service Center or an experienced ra­dio/TV technician for help.

Warning

To assure continued compliance, use only shielded interface
cables when connecting to a computer or peripheral. Also, any
changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate this equipment.

FCC RF Exposure Warning: This computer is provided with
PC Card slots that could be used with wireless transmitter(s),
which will be specifically recommended, when they become
available. Other third-party wireless transmitter(s) have not been
RF exposure evaluated for use with this computer and may not
comply with FCC RF exposure requirements.

This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including

interference that may cause undesired operation.

Responsible Party: Matsushita Electric Corporation of America

One Panasonic Way
Secaucus, NJ 07094
Tel No:1-800-LAPTOP-5 (1-800-527-8675)

FCC Regulation Notice for modem
This equipment contains a FCC approved modem.

Manufacturer of modem: AMBIT Microsystems Corporation
Model No. T60M250.02

Tested To Comply
With FCC Standards

FOR HOME OR OFFICE USE

1. This equipment complies with Part 68 of the FCC rules. On
the computer is a label that contains, among other informa­tion, the FCC registration number and ringer equivalence
number (REN) for this equipment. If required, this informa­tion must be provided to the telephone company.

2. An FCC compliant telephone cord and modular plug is pro­vided with this equipment. This equipment is designed to be
connected to the telephone network or premises wiring using
a compatible modular jack which is Part 68 compliant. See
Installation Instructions for details.

3. The REN is used to determine the quantity of devices which
may be connected to the telephone line. Excessive RENs on the
telephone line may result in the devices not ringing in response
to an incoming call. In most, but not all area, the sum of RENs
should not exceed five (5.0). To be certain of the number of
devices that may be connected to a line, as determined by the
total RENs, contact the local telephone company.

4. If your telephone equipment cause harm to the telephone net­work, the telephone company will notify you in advice that
temporary discontinuance of service may be required. But if
advice notice isn’t practical, the telephone company will no­tify the customer as soon as possible. Also, you will be ad­vised of your right to file a complaint with the FCC if you
believe it is necessary.

5. The telephone company may take changes in it’s facilities,
equipment, operations or procedures that could affect the op­eration of the equipment. If this happens the telephone com­pany will provide advance notice in order for you to make
necessary modifications to maintain uninterrupted service.

6. If trouble is experienced with this equipment, for repair or
warranty information, please contact Matsushita Electric
Corporation of America at DIAL TOLL FREE 1-800­LAPTOP5 (1-800-527-8675). If the equipment is causing harm
to the telephone network, the telephone company may request
that you disconnect the equipment until the problem is resolved.

7. There are no user serviceable parts contained in this equipment.

8. This equipment may not be used on coin service provided by
the telephone company. Connection to party lines is subject to
state tariffs.

9. The Telephone Consumer Protection Act of 1991 makes it
unlawful for any person to use a computer or other electronic
device to send any message via a telephone fax machine un­less such message clearly contains in a margin at the top or
bottom of each transmitted page or on the first page of the
transmission, the date and time it is sent and an identification
of the business or other entry, or other individual sending the
message and the telephone number of the sending machine or
such business, other entity, or individual. In order to program
this information into your fax software, you should refer to
the manual of the Fax software being used.

10.According to the FCC’s electrical safety advisory, we recom­mend that you may install an AC surge arrestor in the AC outlet
to which this equipment is connected. Telephone companies re­port that electrical surges, typically lightning transients, are very
destructive to customer terminal equipment connected to AC
power sources and that this is a major nationwide problem.

“Caution: To reduce the risk of fire, use only No.26 AWG or larger telecom­munication line cord.”
“ATTENTION: Pour réduire le risque d’incendie, utiliser uniquement des
conducteurs de télécommunications 26 AWG ou de section supérieure.”

Notice for the products using LCD

This product uses one or more fluorescent lamps containing a
small amount of mercury. It also contains lead in some compo­nents. Disposal of these materials may be regulated in your com­munity due to environmental considerations. For disposal or re­cycling information please contact your local authorities, or the
Electronics Industries Alliance: <http://www.eiae.org/>

Getting Started

3

Read Me First

For Canada

Industry Canada (IC) Notice for modem

This equipment contains an Industry Canada approved modem unit.
The Industry Canada label is affixed on the modem unit.

EQUIPMENT ATTACHMENT LIMITATIONS

“NOTICE: The Industry Canada label identifies certified
equipment. This certification means that the equipment meets
telecommunications network protective, operational and
safety requirements as prescribed in the appropriate Terminal
Equipment Technical Requirements document(s). The
Department does not guarantee the equipment will operate
to the user’s satisfaction.
Before installing this equipment, users should ensure that it
is permissible to be connected to the facilities of the local
telecommunications company. The equipment must also be
installed using an acceptable method of connection. The
customer should be aware that compliance with the above
conditions may not prevent degradation of service in some
situations.

Getting Started

Repairs to certified equipment should be coordinated by a
representative designated by the supplier. Any repairs or
alterations made by the user to this equipment, or equipment
malfunctions, may give the telecommunications company
cause to request the user to disconnect the equipment.
Users should ensure for their own protection that the
electrical ground connections of the power utility, telephone
lines and internal metallic water pipe system, if present, are
connected together. This precaution may be particularly
important in rural areas. Caution: Users should not attempt
to make such connections themselves, but should contact
the appropriate electric inspection authority, or electrician,
as appropriate.”
“NOTICE: The Ringer Equivalence Number (REN) assigned
to each terminal device provides an indication of the
maximum number of terminals allowed to be connected to a
telephone interface. The termination on an interface may
consist of any combination of devices subject only to the
requirement that the sum of the Ringer Equivalence Numbers
of all the devices does not exceed 5.”

REN: See bottom of the computer

RESTRICTIONS CONCERNANT LE RACCORDEMENT
DE MATÉRIEL

“AVIS: L’étiquette d’Industrie Canada identifie le matériel
homologué. Cette étiquette certifie que le matériel est
conforme aux normes de protection, d’exploitation et de
sécurité des réseaux de télécommunications, comme le
prescrivent les documents concernant les exigences
techniques relatives au matériel terminal. Le Ministère
n’assure toutefois pas que le matériel fonctionnera à la
satisfaction de l’utilisateur.
Avant d’installer ce matériel, l’utilisateur doit s’assurer qu’il
est permis de le raccorder aux installations de l’entreprise
locale de télécommunication. Le matériel doit également être
installé en suivant une méthode acceptée de raccordement.
L’abonné ne doit pas oublier qu’il est possible que la
conformité aux conditions énoncées ci-dessus n’empêche
pas la dégradation du service dans certaines situations.
Les réparations de matériel homologué doivent être
coordonnées par un représentant désigné par le fournisseur.
L’entreprise de télécommunications peut demander à
l’utilisateur de débrancher un appareil à la suite de
réparations ou de modifications effectuées par l’utilisateur
ou à cause de mauvais fonctionnement.
Pour sa propre protection, l’utilisateur doit s’assurer que tous
les fils de mise à la terre de la source d’énergie électrique,
des lignes téléphoniques et des canalisations d’eau
métalliques, s’il y en a, sont raccordés ensemble. Cette
précaution est particulièrement importante dans les régions
rurales. Avertissement: L’utilisateur ne doit pas tenter de faire
ces raccordements lui-même; il doit avoir recours à un service
d’inspection des installations électriques, ou à un électricien,
selon le cas.”
“AVIS: L’indice d’équivalence de la sonnerie (IES) assigné
à chaque dispositif terminal indique le nombre maximal de
terminaux qui peuvent être raccordés à une interface. La
terminaison d’une interface téléphonique peut consister en
une combinaison de quelques dispositifs, à la seule condition
que la somme d’indices d’équivalence de la sonnerie de touts
les dispositifs n’excède pas 5.”

IES: Voir sous le fond de l’ordinateur

4

Important Safety Instructions / Importantes Mesures De Sécurité

When using your telephone equipment, basic safety pre­cautions should always be followed to reduce the risk of
fire, electric shock and injury to persons, including the fol­lowing:

1.Do not use this product near water, for example, near a
bath tub, wash bowl, kitchen sink or laundry tub, in a wet
basement or near a swimming pool.

2.Avoid using a telephone (other than a cordless type) dur­ing an electrical storm. There may be a remote risk of
electric shock from lightning.

3.Do not use the telephone to report a gas leak in the vicin­ity of the leak.

4.Use only the power cord and batteries indicated in this
manual. Do not dispose of batteries in a fire. They may
explode. Check with local codes for possible special dis­posal instructions.

SAVE THESE INSTRUCTIONS

Certaines mesures de sécurité doivent être prises pendant
l’utilisation de matérial téléphonique afin de réduire les
risques d’incendie, de choc électrique et de blessures. En
voici quelquesunes:

1.Ne pas utiliser l’appareil près de l’eau, p.ex., près d’une
baignoire, d’un lavabo, d’un évier de cuisine, d’un bac à
laver, dans un sous-sol humide ou près d’une piscine.

2.Éviter d’utiliser le téléphone (sauf s’il s’agit d’un appareil
sans fil) pendant un orage électrique. Ceci peut présenter
un risque de choc électrique causé par la foudre.

3.Ne pas utiliser l’appareil téléphonique pour signaler une
fuite de gaz s’il est situé près de la fuite.

4.Utiliser seulement le cordon d’alimentation et le type de
piles indiqués dans ce manual. Ne pas jeter les piles dans
le feu: elles peuvent exploser. Se conformer aux règlements
pertinents quant à l’élimination des piles.

CONSERVER CES INSTRUCTIONS

Lithium Battery

Precautions

Lithium Battery!

This computer contains a lithium battery to enable the date, time,
and other data to be stored. The battery should only be exchanged
by authorized service personnel.
Warning! A risk of explosion from incorrect installation or mis­application may possibly occur.

Pile au lithium!

Le micro-ordinateur renferme une pile au lithium qui permet de
sauvegarder certaines données comme la date et l’heure
notamment. Elle ne devra être remplacée que par un technicien
qualifié.
Avertissement! Risque d’explosion en cas de non respect de cette
mise en garde!

The CF-M34 was developed based on thorough research into
the real-world portable computing environments. Exhaustive pur­suit of usability and reliability under harsh conditions led to in­novations such has the magnesium alloy exterior, vibration
damped hard disk drive and floppy disk drive, flexible internal
connections. The CF-M34’s outstanding engineering has been
tested using the stiff MIL-STD- 810E (for vibration and shock)
and IP (for dust and water) based procedures.
As with any portable computer device precautions should be
taken to avoid any damage. The following usage and handling
procedures are recommended.

Before putting the computer away, be sure to wipe off any
moisture.

Avoid Radio Frequency Interference

Do not place the computer near a television or ra­dio receiver.

Avoid Magnetic Fields

Keep the computer away from magnets.
Data stored on the hard disk may be lost.

Keep Small Objects Away

Do not insert paper clips or other small objects into
the computer.

Getting Started

Do Not Disassemble the Computer

Do not attempt to disassemble your computer.

Avoid Excessive Force on the Display

Do not apply excessive downward force on the
display when it is completely opened, especially
when plugs and/or cables are connected to the rear
of the computer.

Avoid low-temperature burns

Avoid more than casual contact with any heat pro­ducing area of the notebook computer, power adap­tor, and any option or accessory you use with it. Even
low heat, if warmer than body temperature, can cause
a burn, if the skin is exposed to the heat source for a
long enough period of time.

Peripherals

Incorrectly using peripheral devices may lead to a decrease in per­formance, an increase in temperature and/or damage your com­puter. For more information on peripheral devices, refer to the
Reference Manual.

Cables

Use of an interface cable longer than 3 m (9.84 feet) is not recom­mended.

5

Read Me First

Precautions ( Battery Pack )

Getting Started

Care should be exercised with regard to the following in
order to avoid the possibility of overheating, fire or dam­age.

Avoid Heat

Do not throw the battery pack into a fire or
expose it to excessive heat.

Keep Articles Away

Do not place the battery pack together with ar­ticles such as necklaces or hairpins when carry­ing or storing.

Do Not Disassemble

Do not insert sharp objects into the battery pack,
expose it to bumps or shocks, deform, disas­semble, or modify it.

Do Not Short

Do not short the positive (+) and negative (-)
contacts.

Avoid Extreme Heat, Cold and Direct Sun­light

Do not charge, use or leave the battery pack for
extended periods where it will be exposed to
direct sunlight, in a hot place (in car on a sunny
day, for example), or in a cold place.

Do Not Use With Any Other Computer

The battery pack is rechargeable and was in­tended for the specified computer or charger.
Do not use it with a computer other than the
one for which it was designed.

Do Not Put into a Microwave

Do not put the battery pack into a microwave
oven or a pressurized chamber.

Discontinue Use

Should the battery emit an abnormal odor, be­come hot to the touch, become discolored,
change shape, or become in any way different
from normal, remove it from the computer or
charger and discontinue use.

Do not touch the terminals on the battery pack. The bat­tery pack may no longer function properly if the contacts
are dirty or damaged.
Do not expose the battery pack to water, or allow it to
become wet.

If the battery pack will not be used for a long period of time
(a month or more), charge or discharge (use) the battery pack
until the remaining battery level becomes 30% to 40% and
store it in a cool, dry place.
This computer prevents overcharging of the battery by re­charging only when the remaining power is less than approx.
95% of capacity.
The battery pack is not charged when the computer is first
purchased. Be sure to charge it before using it for the first

time. When the AC adaptor is connected to the computer,
charging begins automatically.
Should the battery leak and the fluid get into your eyes, do not
rub your eyes. Immediately flush your eyes with clear water
and see a doctor for medical treatment as soon as possible.

NOTE

The battery pack may become warm during recharging or
normal use. This is completely normal.
Recharging will not commence outside of the allowable
temperature range (0 °C to 50 °C {32°F to 122 °F})

"Battery Power". Once the allowable range re­quirement is satisfied, charging begins automatically.
Note that the recharging time varies based on the usage
conditions. (Recharging takes longer than usual when the
temperature is 10 °C {50 °F} or less.)
If the temperature is low, the operating time is shortened.
Only use the computer within the allowable temperature
range.
This computer has a high temperature mode function that
prevents the degradation of the battery in high temperature
environments. If the high temperature mode is selected
in the Setup Utility ( “Setup Utility”), a level

of maximum capacity in the [High Temperature] mode is
below 65%.

The battery pack is a consumable item. If the amount of
time the computer can be run off a particular battery pack
becomes dramatically shorter and repeated rechargings
do not restore its performance, the battery pack should be
replaced with a new one.
When transporting space batteries inside a package,
briefcase, etc., it is recommended that it be placed in a
plastic bag so that its contacts are protected.
Always power off the computer when it is not in use.
Leaving the computer on when the AC adaptor is not
connected will exhaust the remaining battery capacity.

6

When using peripheral devices

Pay strict attention to the following points to avoid damage to the computer, peripheral devices, cables, etc.
Also, in addition to following this manual, carefully read the instruction manuals for the peripheral devices
being used.

Connect the devices properly, paying close attention to the condition and position of the connectors.
If a connection cannot be made easily, do not apply undue force; check once more to confirm the condi­tion and position of the connector (alignment of pins, etc.) .
If the connector has holding screws, fasten the screws firmly.
Do not carry the computer with cables attached, and do not pull on the cables forcefully.

Saving Data on the Hard Disk

Do not expose your computer to shock.

Use care when handling your computer, shock may damage your hard disk or make your software appli­cations and data unusable.

Do not power down your computer while software applications are running or hard disk drive indicator ( )
is on.

Properly shut Windows* down to avoid problems.

Save all valuable data to disks.

Backing up data to disks will limit damage should trouble occur to your computer or should you inad­vertently change or erase data.
Use the security function for all important data. ( “Security Measures”)

* Windows 2000 : This computer uses Microsoft

Windows XP : This computer uses Microsoft® Windows® XP Professional.

Hard Disk Lock

When the Hard Disk Lock is set to [Enable], it is impossible to read/write data from/to the hard disk when the
hard disk is installed in a different computer, since a password is also set for the hard disk. When the hard disk
is returned to the original computer, you can read/write data as before. In this case, however, make the settings
in the Setup Utility exactly the same as they were before the hard disk was removed. (Note that this Hard Disk

Lock does not guarantee the complete protection of data.) ( “Security Measures”)

Saving Data on Disks

Do not power off your computer or press the floppy disk drive eject button while the floppy disk
drive being accessed.

Doing so may damage the data on the floppy disk and render the floppy disk useless.

Use care when handling floppy disks.

To protect the data on your floppy disks or to prevent a floppy disk from becoming stuck in your com­puter, avoid the following:

• Sliding the shutter on the floppy disk manually.

• Exposing the disk to a magnetic field.

• Storing the disk in locations prone to high temperatures, low pitched noise, dampness, or dust.

• Applying more than one label on the disk.

Confirm the contents of a floppy disk before formatting it.

Confirm that no important data is on the floppy disk, because all data on the floppy disk will be erased.

Use the write-protect tab.

This is a must for preserving important data. This
prevents your data from being erased or overwritten.

®

Windows® 2000 Professional.

Write Enable Write Disable

Getting Started

Write-protect Tab

Computer Viruses

Users are advised to purchase the latest versions of virus protection software and use them regularly.

We recommend you run the software:

• When booting your computer.

• After receiving data.
We recommend that you check data received on disks or from external sources, such as data downloaded from the
Internet, e-mail, etc. (For compressed files, uncompress them before running a check).

When Disposing of or Transferring Ownership of This Device

When disposing of or transferring ownership of this device, completely erase all data on the hard disk in
order to prevent loss of hard disk data. Even if you delete data or initialize the hard disk through normal
Windows commands, data can still be read using special software. In order to completely erase data, either
have the data erased by a specialist (at a charge) or use special software (sold separately).
Also note that transferring ownership of this device without deleting software from the hard disk may
violate software user’s licenses.

7

Read Me First

Usage Environment

Handling

Getting Started

Environment

Place the computer on a flat stable surface.
In use: Temperature: 5 °C to 35 °C {41 °F to 95 °F}

Humidity: 30% to 80% RH (No condensation)

Not in use: Temperature: -20 °C to 60 °C {-4 °F to 140 °F}

Humidity: 30% to 90% RH (No condensation)

Places not to use your computer

Such areas may result in damage to the computer.

Areas with electronic equipment

These areas may interfere with your display or cause your computer to produce strange sounds.

Areas with extremely high/low temperatures

Do not leave things near the computer that are sensitive to heat. During operation, the
computer may become warm.

This computer has been designed so as to minimize shock to the LCD and hard disk drive, etc.,
but no warranty is provided against such trouble. Therefore, as a precision instrument, be
extremely careful in the handling.
Do not drop or hit your computer against solid objects.
Do not carry your computer when it is on.
Remove all external devices and cables, and PC Cards sticking out of the computer (see the
figure on the left) before transporting the computer.
We recommend preparing a fully charged battery.
When transporting space batteries inside a package, briefcase, etc., it is recommended that it
be placed in a plastic bag so that its contacts are protected.
Do not place the computer upright or allow it to tip over. When the computer receives
extremely strong shock after falling, the hard disk or floppy disk drive, etc., may become
inoperable.
Do not carry the computer while the display is open, or carry it by gripping the display.
Do not put anything (e.g., a piece of paper) between the display and keyboard.
Always carry your computer with you. Never check it in with luggage. For use of the com­puter inside an aircraft, we recommend asking the airlines regarding their policy on this issue.
It is a good idea to make backup copies on disks and carry them with you.
Do not leave a disk in the drive while transporting your computer.

8

Maintenance

Touch Pad

page 17

Display

Use the soft cloth included with the computer. (For more information, refer to “Suggestions
About Cleaning the LCD Surface” that comes with the soft cloth.)
If the Protective Film becomes dirty or damaged, it may be time to replace your Protective
Film. The Protective Film is a disposable item. To find out the model number of your Protec­tive Film, contact Panasonic Technical Support. (For more information, refer to the “Operat­ing Instructions” that come with the Protective Film.)

CAUTION

Do not touch or use a touchscreen before you re-attach a Protective Film, as you may leave
a mark or a scratch on the touchscreen.

Areas excluding the display

Wipe these areas with a soft cloth, after applying water or detergent diluted with water to the
soft cloth and firmly wringing out excess water.

CAUTION

Do not use benzene, thinner, or rubbing alcohol. Doing so may adversely affect the surface, e.g., discoloration.
In addition, do not use commercially-available household cleaners and cosmetics, as they may contain compo­nents harmful to the surface.
Do not directly add or spray water or detergent. If liquid enters the inside of the computer, it may cause it to
work improperly or be damaged.

First-time Operation

Read the steps below to help you learn what parts are included, and to gain an understanding of
some basic computer-related operations.

Confirm the inclusion of all parts

1

Make sure the parts shown in the figure have been supplied. If any of these items are
missing or is not working properly, contact Panasonic Technical Support.

Latch

3

Cover

AC adaptor ..........1

Model No : CF-AA1653

Modem T elephone

Cable ...................... 1

Strap .......................1

( “Accessories”)

Read the LIMITED USE LICENSE AGREEMENT ( page 26)

2

Before removing the seal covering the power switch, read the LIMITED USE LICENSE
AGREEMENT.

Insert the battery pack

3

AC Cord ...............1

Soft Cloth ...............1 Stylus .....................1

Product Recovery
CD-ROM

Battery Pack........1

Model No :CF-VZSU15A

( “T ouchscreen”)

Operating Instructions

(This book)

Windows® Book .... 1

.................... 1

Getting Started

2

Battery Pack

4

5

1

Turn your computer over.

2 Unlock the latch.

3

Open the cover.

4 Put a battery pack into the computer.

CAUTION

Do not touch the terminals on the battery pack and the computer. The battery
pack may no longer function properly if the contacts are dirty or damaged.
Also, the computer may not operate properly.

5 Slide the battery pack inward until it is firmly in place.

CAUTION

Be sure the battery pack is properly connected to the connector.

9

First-time Operation

Getting Started

7

8

2

1

6

3

6 The cover is closed by inserting the hook at the right end (see illustration) into the

groove.

7 Close the cover.
8 Lock the latch into place.

CAUTION

Confirm that the latch lock is correctly in place. Should you decide to carry your
computer without the latch lock in place, the cover may open causing the battery
pack to fall out.

Connect your computer to a power outlet

4

CAUTION

Be sure the AC adaptor is connected until completing Step 8 on page 11.
When using the computer for the first time, do not connect any peripheral de­vice except the battery pack and AC adaptor to the computer.

Handling the AC adaptor

Do not twist or pull the AC power cord forcefully. Doing so may damage the
connections.
Use only the specified AC adaptor with your computer. Using an AC adaptor
other than the one supplied might damage the battery and/or the computer.
When the DC plug is not connected to the computer, disconnect the AC cord
from your AC wall outlet.
Problems such as sudden voltage drops may arise during periods of thunder and
lightning. Since this could adversely affect your computer, an uninterruptible power
source (UPS) is highly recommended unless the battery pack is installed.

Latch

Power
Indicator

Power Switch

Open the display

5

1 Lift up the latch.
2 Lift open the display.

Turn your computer on

6

Slide the power switch and hold it for approximately one second until the power indi­cator ( ) turns on before releasing it.

CAUTION

Once the computer is powered off, you must wait at least ten seconds before pow­ering it on again.

10