Panasonic CF-53, CF53JBLZY1M User Manual

OPERATING INSTRUCTIONS
Model No. CF-53 series
Contents
Getting Started
Introduction.................................................2
Read Me First ..............................................3
(Precautions)
Description of Parts .....................................10
First-time Operation .....................................12
Useful Information
On-screen Manual.......................................16
Getting StartedUseful InformationTroubleshootingAppendix
For further information about the com­puter, you can refer to the on-screen manual. To access the on-screen manual Î page 16 “On-screen Manual”
Handling and Maintenance.............................17
Reinstalling Software....................................19
Troubleshooting
Troubleshooting (Basic) ................................21
Appendix
LIMITED USE LICENSE AGREEMENT..............26
Specifications ............................................28
LIMITED WARRANTY ..................................32
Please read these instructions carefully before using this product, and save this manual for future use.
Introduction
Thank you for purchasing this Panasonic product. For optimum performance and safety, please read these instructions carefully.
Terms and illustrations in these instructions
CAUTION
NOTE
Enter Fn
+ F5 : Press and hold [Fn] key, and then press [F5] key.
(Start) - [All Programs]: Click (Start), and then click [All Programs]. [start] - [Run] : Click [start], and then click [Run]. You may need to double-click in some cases. Î : Page in these Operating Instructions or in the Reference Manual.
: Conditions that may result in minor or moderate injury.
: Useful and helpful information.
: Press [Enter] key.
: Reference to the on-screen manuals.
z indicates Genuine Windows z indicates Genuine Microsoft
z Some illustrations are simplified to help your understanding and may look different from the actual unit. z If you do not log on as an administrator, you cannot use some functions or cannot display some screens. z Refer for the latest information about optional products to the catalogs, etc. z In these instructions, the names and terms are referred as follows.
Getting StartedUseful InformationTroubleshootingAppendix
• “Genuine Windows Pack 1” as “Windows” or “Windows 7”
• “Genuine Microsoft
• DVD MULTI drive as “CD/DVD drive”
• Circular media including DVD-ROM and CD-ROM as “discs”
Disclaimer
Computer specifications and manuals are subject to change without notice. Panasonic Corporation assumes no liability for damage incurred directly or indirectly from errors, omissions or discrepancies between the computer and the manu­als.
Trademarks
Microsoft and/or other countries. Intel, Core, Centrino and PROSet are either registered trademarks or trademarks of Intel Corporation.
SDXC Logo is a trademark of SD-3C, LLC.
®
, Windows® and the Windows logo are registered trademarks of Microsoft Corporation of the United States
®
7 Professional 32-bit Service Pack 1” and “Genuine Windows® 7 Professional 64-bit Service
®
Windows® XP Professional Service Pack 3” as “Windows” or “Windows XP”
®
7 Professional Operating System.
®
Windows® XP Professional Operating System.
Adobe, the Adobe logo and Adobe Reader are either registered trademarks or trademarks of Adobe Systems Incorpo­rated in the United States and/or other countries.
Bluetooth™ is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed to Panasonic Corporation. HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other countries. Corel, InterVideo Corporation and/or its subsidiaries in Canada, the United States and/or other countries. Sonic and Roxio are trademarks or registered trademarks of Sonic in the United states and/or other countries. Names of products, brands, etc., appearing in this manual are trademarks or registered trademarks of their respective own companies.
®
, WinDVD®, the InterVideo logo and the Corel logo are trademarks or registered trademarks of Corel
2
Read Me First
Important Safety Instructions / Importantes Mesures De Securite
<Only for model with modem> When using your telephone equipment, basic safety precau­tions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following:
1. Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool.
2. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning.
3. Do not use the telephone to report a gas leak in the vicinity of the leak.
4. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special disposal instructions.
SAVE THESE INSTRUCTIONS
Certaines mesures de sécurité doivent être prises pen­dant l’utilisation de matérial téléphonique afin de réduire les risques d’incendie, de choc électrique et de blessures. En voici quelquesunes:
1. Ne pas utiliser l’appareil près de l’eau, p.ex., près d’une baignoire, d’un lavabo, d’un évier de cuisine, d’un bac à laver, dans un sous-sol humide ou près d’une piscine.
2.
Éviter d’utiliser le téléphone (sauf s’il s’agit d’un appareil sans fil) pendant un orage électrique. Ceci peut présenter un risque de choc électrique causé par la foudre.
3. Ne pas utiliser l’appareil téléphonique pour signaler une fuite de gaz s’il est situé près de la fuite.
4.
Utiliser seulement le cordon d’alimentation et le type de piles indiqués dans ce manual. Ne pas jeter les piles dans le feu: elles peuvent exploser. Se conformer aux règlements pertinents quant à l’élimination des piles.
CONSERVER CES INSTRUCTIONS
19-E-1
19-F-1
Information to the User
<Only for model with wireless LAN>
This product and your Health
This product, like other radio devices, emits radio frequency electromagnetic energy. The level of energy emitted by this product however is far much less than the electromagnetic energy emitted by wireless devices like for example mobile phones. Because this product operates within the guidelines found in radio frequency safety standards and recommendations, we believe this product is safe for use by consumers. These stan­dards and recommendations reflect the consensus of the scien­tific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature. In some situations or environments, the use of this prod­uct may be restricted by the proprietor of the building or responsible representatives of the organization. These sit­uations may for example include:
z Using this product on board of airplanes, or z
In any other environment where the risk of interference to other devices or services is perceived or identified as harmful.
If you are uncertain of the policy that applies on the use of wireless devices in a specific organization or environment
(e.g. airports), you are encouraged to ask for authoriza­tion to use this product prior to turning on the product.
Regulatory Information
We are not responsible for any radio or television interfer­ence caused by unauthorized modification of this product. The correction of interference caused by such unautho­rized modification will be the responsibility of the user. We and its authorized resellers or distributors are not liable for damage or violation of government regulations that may arise from failing to comply with these guidelines.
26-M-1
Lithium Battery / Pile au lithium
Lithium Battery!
This computer contains a lithium battery to enable the date, time, and other data to be stored. The battery should only be exchanged by authorized service personnel. Warning! A risk of explosion from incorrect installation or misapplication may possibly occur.
15-E-1
Pile au lithium!
Le micro-ordinateur renferme une pile au lithium qui permet de sauvegarder certaines données, notamment la date et l’heure. La pile ne doit être remplacée que par un technicien qualifié. Danger ! Risque d’explosion en cas de non respect de cette mise en garde!
15-F-1
CD/DVD Drive Caution / Précautions pour le lecteur CD/DVD
CAUTION!
THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS, ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.
12-E-1
AVERTISSEMENT!
CET APPAREIL UTILISE UN LASER. L’UTILISATION DE COMMANDES OU DE RÉGLAGES OU L’EXÉ­CUTION DE PROCÉDURES AUTRES QUE CELLES SPÉCIFIÉES ICI PEUVENT PROVOQUER UNE EXPOSITION À DES RADIA­TIONS DANGEREUSES. NE PAS OUVRIR LES COUVERCLES NI ESSAYER DE RÉPARER SOIMÊME. CONFIER TOUT TRAVAIL D’ENTRETIEN À UN PERSONNEL QUALIFIÉ.
12-F-1
The following label is put on the bottom of the computer.
Getting StartedUseful InformationTroubleshootingAppendix
3
Read Me First
Information for Users on Collection and Disposal of Old Equipment and used Batteries
These symbols are only valid in the European Union. If you wish to dis­card this product, please contact your local authorities or dealer and ask for the correct method of dis­posal.
Safety Precautions
<Only for model with wireless WAN> The following safety precautions must be observed during all phases of the operation, usage, service or repair of any Personal Computer or Handheld Computer incorporating wireless WAN modem. Manufacturers of the cellular ter­minal are advised to convey the following safety informa-
Getting StartedUseful InformationTroubleshootingAppendix
tion to users and operating personnel and to incorporate these guidelines into all manuals supplied with the prod­uct. Failure to comply with these precautions violates safety standards of design, manufacture and intended use of the product. Panasonic assumes no liability for customer failure to comply with these precautions.
When in a hospital or other health care facility, observe the restrictions on the use of mobiles. Switch Personal Computer or Handheld Computer incorporating wireless WAN modem off, if instructed to do so by the guidelines posted in sensitive areas. Medical equipment may be sensitive to RF energy. The operation of cardiac pacemakers, other implanted medical equipment and hearing aids can be affected by interference from Personal Computer or Handheld Computer incorporating wireless WAN modem placed close to the device. If in doubt about potential danger, contact the physician or the manu­facturer of the device to verify that the equipment is properly shielded. Pacemaker patients are advised to keep their Personal Computer or Handheld Com­puter incorporating wireless WAN modem away from the pacemaker, while it is on.
Switch off Personal Computer or Handheld Com­puter incorporating wireless WAN modem before boarding an aircraft. Make sure it cannot be switched on inadvertently. The operation of wireless appli­ances in an aircraft is forbidden to prevent interfer­ence with communications systems. Failure to observe these instructions may lead to the suspen­sion or denial of cellular services to the offender, legal action, or both. For details on usage of this unit in aircrafts please consult and follow instruction provided by the airline.
Do not operate Personal Computer or Handheld Computer incorporating wireless WAN modem in the presence of fl ammable gases or fumes. Switch off the cellular terminal when you are near petrol sta­tions, fuel depots, chemical plants or where blasting operations are in progress. Operation of any electri­cal equipment in potentially explosive atmospheres can constitute a safety hazard.
53-M-1
Your Personal Computer or Handheld Computer incorporating wireless WAN modem receives and transmits radio frequency energy while switched on. Remember that interference can occur if it is used close to TV sets, radios, computers or inadequately shielded equipment. Follow any special regulations and always switch off Personal Computer or Hand­held Computer incorporating wireless WAN modem wherever forbidden, or when you suspect that it may cause interference or danger.
Road safety comes fi rst! Do not use a Personal Computer or Handheld Computer incorporating wire­less WAN modem while driving a vehicle. Do not place the computer with wireless WAN modem in an area where it could cause personal injury to the driver or passengers. It is recommended to stow the unit in the boot or secure stowage area while driving. Do not place the computer with wireless WAN modem in an area over an air bag or in the vicinity where an air bag may deploy. Air bags infl ate with great force and if the computer with wireless WAN modem is placed in the air bag deployment area may be propelled with great force and cause serious injury to occupants of the vehicle.
IMPORTANT! Personal Computer or Handheld Computer incorpo­rating wireless WAN modem operate using radio sig­nals and cellular networks cannot be guaranteed to connect in all conditions. Therefore, you should never rely solely upon any wireless device for essen­tial communications, for example emergency calls. Remember, in order to make or receive calls, Per­sonal Computer or Handheld Computer incorporat­ing wireless WAN modem must be switched on and in a coverage area with adequate cellular signal strength. Some networks do not allow for emergency calls if certain network services or phone features are in use (e.g. lock functions, fi xed dialing etc.). You may need to deactivate those features before you can make an emergency call. Some networks require that a valid SIM card be properly inserted in Personal Computer or Handheld Computer incorporating wireless WAN modem.
Models for U.S.A.
Federal Communications Commission Radio Fre­quency Interference Statement
Note: This equipment has been tested and found to com­ply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer­ence in a residential installation. This equipment gener­ates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television recep­tion, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
4
z Reorient or relocate the receiving antenna. z Increase the separation between the equipment and
receiver.
z Connect the equipment into an outlet on a circuit differ-
ent from that to which the receiver is connected.
z Consult the Panasonic Service Center or an experi-
enced radio/TV technician for help.
Warning
To assure continued compliance, use only shielded inter­face cables when connecting to a computer or peripheral. Also, any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received,
including interference that may cause undesired oper­ation.
FCC RF Exposure Warning:
z This equipment is provided with PC Card slot that
could be used with wireless transmitters, which will be specifically recommended when they become avail­able. Other third-party wireless transmitters have not been RF exposure evaluated for use with this computer and may not comply with FCC RF exposure requirements.
<Only for model with wireless LAN/Bluetooth> z This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment.
z This equipment has been approved for mobile opera-
tion, and unless otherwise advised in separate supple­mental instructions for individual wireless transmitter(s), requires minimum 20cm spacing be pro­vided between antenna(s) and all person’s body (excluding extremities of hands, wrist and feet) during wireless modes of operation.
z This equipment may not be co-located or operated
with any other antenna or transmitter.
25-M-6
<Only for model with wireless LAN> This product is restricted to indoor use due to its operation in the
5.15 to 5.25 GHz frequency range.
FCC requires this product to be used indoors for the frequency range 5.15 to 5.25 GHz to reduce the potential for harmful inter­ference to co-channel Mobile Satellite systems. High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and/or damage this product.
25-M-W-6
Responsible Party: Panasonic Corporation of North Amer­ica One Panasonic Way Secaucus, NJ 07094 Tel No:1-800-LAPTOP5 (1-800-527-8675)
6-M-1
<Only for model with modem> FCC Regulation Notice for modem This equipment contains a FCC approved modem.
1. This equipment complies with CFR47 Part 68 rules. On the computer is a label that contains, among other infor-
mation, the FCC registration number and ringer equivalence number (REN) for this equipment. If required, this informa­tion must be provided to the telephone company.
2.
An FCC compliant telephone cord and modular plug is pro­vided with this equipment. This equipment is designed to be connected to the telephone network or premises wiring using a compatible modular jack which is Part 68 compliant. See Installation Instructions for details.
3.
The REN is used to determine the quantity of devices which may be connected to the telephone line. Excessive RENs on the telephone line may result in the devices not ringing in response to an incoming call. In most, but not all area, the sum of RENs should not exceed five (5.0). To be certain of the num­ber of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company.
4.
If your telephone equipment cause harm to the telephone network, the telephone company will notify you in advice that temporary discontinuance of service may be required. But if advice notice isn’t practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary.
5. The telephone company may take changes in its facili­ties, equipment, operations or procedures that could affect the operation of the equipment. If this happens the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service.
6.
If trouble is experienced with this equipment, for repair or warranty information, please contact Panasonic Corporation of North America at DIAL TOLL FREE 1-800-LAPTOP5 (1­800-527-8675). If the equipment is causing harm to the tele­phone network, the telephone company may request that you disconnect the equipment until the problem is resolved.
7. There are no user serviceable parts contained in this equipment.
8. This equipment may not be used on coin service pro­vided by the telephone company. Connection to party lines is subject to state tariffs.
9.
The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device to send any message via a telephone fax machine unless such message clearly contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission, the date and time it is sent and an identification of the business or other entry, or other individual sending the message and the telephone number of the sending machine or such business, other entity, or individual. In order to pro­gram this information into your fax software, you should refer to the manual of the Fax software being used.
10.According to the FCC’s electrical safety advisory, we recommend that you may install an AC surge arrestor in the AC outlet to which this equipment is connected. Telephone companies report that electrical surges, typ­ically lightning transients, are very destructive to cus­tomer terminal equipment connected to AC power sources and that this is a major nationwide problem.
“Caution : To reduce the risk of fire, use only No.26 AWG or larger (e.g., 24 AWG) UL listed or CSA certified tele­communication line cord.” “ATTENTION : Pour réduire le risque d’incendie, utiliser
uniquement des conducteurs de télécommunications 26 AWG ou de section supérieure (p. ex. 24 AWG) UL énumérés ou CSA certifié.”
16-M-1
Getting StartedUseful InformationTroubleshootingAppendix
5
Read Me First
FCC RF Exposure Warning:
This equipment is provided with external antenna connec­tor(s) for connection to optional Car Mounter or Port Rep­licator for mobile external mounted antenna(s). External antenna(s) must be professionally installed and cannot exceed recommended maximum antenna gain as described in individual provided supplement instructions for wireless transmitters. The Car Mounter is provided with Radiall/Larsen WLAN whip antenna, type NMO5E2400BKTNC with 5 dBi antenna gain. Also, user must maintain minimum 20 cm spacing between external antenna(s) and all person’s body (excluding extremities of hands, wrist and feet) during wireless modes of operation.
USA Only: Disposal may be regulated in your commu­nity due to environmental considerations. For disposal or recycling information, please visit Panasonic website: http://www.panasonic.com/environmental 769-0149
For U.S.A.-California Only
This product contains a CR Coin Cell Lithium Bat-
Getting StartedUseful InformationTroubleshootingAppendix
tery which contains Perchlorate Material – special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate/
or call 1-888-
Models for Canada
<Only for model with modem> Industry Canada (IC) Notice for modem
This equipment contains an Industry Canada approved modem unit. The Industry Canada label is affixed on the modem unit.
EQUIPMENT ATTACHEMENT LIMITATIONS
“NOTICE: The Industry Canada label identifies certified equipment. This certification means that the equipment meets tele­communications network protective, operational and safety requirements as prescribed in the appropriate Ter­minal Equipment Technical Requirements document(s). The Department does not guarantee the equipment will operate to the user’s satisfaction. Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connec­tion. The customer should be aware that compliance with the above conditions may not prevent degradation of ser­vice in some situations. Repairs to certified equipment should be coordinated by a representative designated by the supplier. Any repairs or alterations made by the user to this equipment, or equip­ment malfunctions, may give the telecommunications company cause to request the user to disconnect the equipment. Users should ensure for their own protection that the elec­trical ground connections of the power utility, telephone lines and internal metallic water pipe system, if present, are connected together. This precaution may be particu­larly important in rural areas. Caution: Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority, or electrician, as appropriate.”
32-M-1
65-M-2
38-M-1
“NOTICE: The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the maximum number of terminals allowed to be con­nected to a telephone interface. The termination on an interface may consist of any combi­nation of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed 5.” REN: See bottom of the computer
RESTRICTIONS CONCERNANT LE RACCORDEMENT DE MATÉRIEL
“AVIS: L’étiquette d’Industrie Canada identifie le matériel homologué. Cette étiquette certifie que le matériel est conforme aux normes de protection, d’exploitation et de sécurité des réseaux de télécommunications, comme le prescrivent les documents concernant les exigences techniques relatives au matériel terminal. Le Ministère n’assure toutefois pas que le matériel fonctionnera à la satisfaction de l’utili­sateur. Avant d’installer ce matériel, l’utilisateur doit s’assurer qu’il est permis de le raccorder aux installations de l’entre­prise locale de télécommunication. Le matériel doit égale­ment être installé en suivant une méthode acceptée de raccordement. L’abonné ne doit pas oublier qu’il est possible que la con­formité aux conditions énoncées ci-dessus n’empêche pas la dégradation du service dans certaines situations. Les réparations de matériel homologué doivent être coor­données par un représentant désigné par le fournisseur. L’entreprise de télécommunications peut demander à l’utilisateur de débrancher un appareil à la suite de répa­rations ou de modifications effectuées par l’utilisateur ou à cause de mauvais fonctionnement. Pour sa propre protection, l’utilisateur doit s’assurer que tous les fils de mise à la terre de la source d’énergie élec­trique, des lignes téléphoniques et des canalisations d’eau métalliques, s’il y en a, sont raccordés ensemble. Cette précaution est particulièrement importante dans les régions rurales. Avertissement: L’utilisateur ne doit pas tenter de faire ces raccordements luimême; il doit avoir recours à un service d’inspection des installations électriques, ou à un électricien, selon le cas.” “AVIS: L’indice d’équivalence de la sonnerie (IES) assigné à chaque dispositif terminal indique le nombre maximal de terminaux qui peuvent être raccordés à une interface. La terminaison d’une interface téléphonique peut consister en une combinaison de quelques dispositifs, à la seule condition que la somme d’indices d’équivalence de la sonnerie de touts les dispositifs n’excède pas 5.” IES: Voir sous le fond de l’ordinateur
17-Ca-1
Canadian ICES-003
This Class B digital apparatus complies with Canadian ICES-003.
7-M-2
<Only for model with wireless LAN/Bluetooth>
Industry Canada
Operation is subject to the following two conditions; (1) this device may not cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
30-Ca-1-1
6
This device has been designed to operate with the Radi­all/Larsen whip antenna, type NMO5E2400BKTNC WLAN antenna having a maximum gain of 5 dBi. A WLAN Antenna having a higher gain is strictly prohibited per reg­ulations of Industry Canada. The Required antenna impedance is 50 ohms. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (EIRP) is not more than that required for successful communication.
Authorised Representative: Panasonic Testing Centre Panasonic Marketing Europe GmbH Winsbergring 15, 22525 Hamburg, Germany
Network connection of Wired Modem. The terminal equipment is intended for connection to the follow­ing public network; In all the countries of European Economical Area and Turkey;
- Public Switched Telephony Networks
Cet appareil est conçu pour opérer avec l’antenne-fouet Radiall/Larsen, type WLAN NMO5E2400BKTNC, ayant un gain maximum de 5 dB. Les règlements d’Industrie Canada interdisent l’utilisation d’une antenne WLAN dont le gain serait supérieur à cette limite. L’antenne doit avoir une impédance de 50 ohms. Afin de réduire le risque d’interférence radioélectrique aux autres utilisateurs des bandes de fréquences, le type d’antenne et son gain doivent être tels que la puissance iso­trope rayonnée équivalente (PIRE) n’est pas plus élevée que le niveau requis pour assurer la communication.
25-Ca-1-1
<Only for model with wireless LAN/Bluetooth> *
This equipment complies with Industry Canada radiation exposure limits set forth for an uncontrolled environment.
* This equipment has been approved for mobile opera-
tion, and unless otherwise advised in separate supple­mental instructions for individual wireless transmitter(s), requires minimum 20 cm spacing be provided between antenna(s) and all personÅfs body (excluding extremities of hands, wrist and feet) during
wireless modes of operation. <Ne s’applique qu’aux modèles avec technologie Blue­tooth/LAN sans fil/WAN sans fil> * Cet équipement est conforme aux limites d’exposition
aux rayonnements d’Industrie Canada établies pour un
environnement non contrôlé. * Cet équipement a été approuvé à des fins d’opération
mobile et, sauf indication contraire, dans une notice
supplémentaire concernant les émetteurs sans fil indi-
viduels, doit être utilisé en veillant qu’il y ait une dis-
tance d’au moins 20 cm entre son(ses) antenne(s) et
le corps de l’utilisateur (sauf les extrémités : mains,
poignets et pieds) dans les modes d’opération sans fil.
FOR USE WITH MODEL NO. : CF-AA5713A POUR UTILISER AVEC MODÈLE : CF-AA5713A
20-Ca-1
Models for Europe
<Only for model with a “CE” mark on the bottom of the computer>
Declaration of Conformity (DoC)
“Hereby, Panasonic declares that this Personal Computer is in compliance with the essential requirements and other relevant provisions of
the Directive 1999/5/EC.”
Hint: If you want to get a copy of the original DoC of our above mentioned products, please contact our web address: http://www.doc.panasonic.de
Technical Features of Wired Modem. The terminal equipment includes the following features;
- DTMF dialing
- Maximum bitrate receiving mode: 56 kbit/s
- Maximum bitrate sending mode: 33.6 kbit/s
18-E-1
Precautions
THIS PRODUCT IS NOT INTENDED FOR USE AS, OR AS PART OF, NUCLEAR EQUIPMENT/SYSTEMS, AIR TRAF­FIC CONTROL EQUIPMENT/SYSTEMS, AIRCRAFT
COCKPIT EQUIPMENT/SYSTEMS
*2
OR ACCESSORIES
, LIFE SUPPORT SYSTEMS OR OTHER EQUIPMENTS/DEVICES/SYSTEMS THAT ARE INVOLVED WITH ENSURING HUMAN LIFE OR SAFETY. PANASONIC WILL NOT BE RESPONSIBLE FOR ANY LIABILITY RESULTING FROM THE USE OF THIS PROD­UCT ARISING OUT OF THE FOREGOING USES.
*1
AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS include Class2 Electrical Flight Bag (EFB) Systems and Class1 EFB Systems when used during critical phases of flight (e.g., during take-off and landing) and/or mounted on to the aircraft. Class1 EFB Systems and 2 EFB Systems are defined by FAA: AC (Advisory Circular) 120-76A or JAA: JAA TGL (Temporary Guidance Leaflets) No.36.
*2
As defined by the European Medical Device Directive (MDD) 93/42/EEC.
Panasonic cannot guarantee any specifications, tech­nologies, reliability, safety (e.g. Flammability/Smoke/ Toxicity/Radio Frequency Emission, etc) requirements related to aviation standards and medical equipment standards that differ from the specifications of our COTS (Commercial-Off-The-Shelf) products.
This computer is not intended for use in medical equip­ment including life-support systems, air traffic control sys­tems, or other equipment, devices or systems that are involved with ensuring human life or safety. Panasonic cannot be held responsible in any way for any damages or loss resulting from the use of this unit in these types of equipment, devices or systems, etc. This computer has been designed so as to minimize shock to the LCD and hard disk drive, the leakage of liq­uid (e.g., water) on to the keyboard, etc., but no warranty is provided against such trouble. Therefore, as a precision instrument, be extremely careful in the handling.
If a Malfunction or Trouble Occurs, Immediately Stop Use If a Malfunction Occurs, Immediately Unplug the AC
Plug and the Battery Pack
• This product is damaged
• Foreign object inside this product
• Smoke emitted
*1
, MEDICAL DEVICES
Getting StartedUseful InformationTroubleshootingAppendix
7
Read Me First
• Unusual smell emitted
• Unusually hot Continuing to use this product while any of the above con­ditions are present may result in fire or electric shock.
If a malfunction or trouble occurs, immediately turn the power off and unplug the AC plug, and then remove the battery pack. Then contact your technical support office for repair.
Do Not Touch This Product and Cable When It Starts Thundering
Electric shock may result.
Do Not Connect the AC Adaptor to a Power Source Other Than a Standard Household AC Outlet
Otherwise, a fire due to overheating may result. Connecting to a DC/AC converter (inverter) may damage the AC adaptor. On an airplane, only connect the AC adaptor/charger to an AC outlet specifically approved for such use.
Do Not Do Anything That May Damage the AC Cord, the AC Plug, or the AC Adaptor
Do not damage or modify the cord, place it near hot tools, bend, twist, or pull it forcefully, place heavy objects on it, or bundle it tightly. Continuing to use a damaged cord may result in fire, short
Getting StartedUseful InformationTroubleshootingAppendix
circuit, or electric shock.
Do Not Pull or Insert the AC Plug If Your Hands Are Wet
Electric shock may result.
Clean Dust and Other Debris of the AC Plug Regularly
If dust or other debris accumulates on the plug, humidity, etc. may cause a defect in the insulation, which may result in a fire.
• Pull the plug, and wipe it with a dry cloth. Pull the plug if the computer is not being used for a long period of time.
Insert the AC Plug Completely
If the plug is not inserted completely, fire due to overheat­ing or electric shock may result.
• Do not use a damaged plug or loose AC outlet.
Do Not Place Containers of Liquid or Metal Objects on Top of This Product
If water or other liquid spills, or if paper clips, coins, or foreign matter get inside this product, fire or electric shock may result.
If foreign matter has found its way inside, immediately turn the power off and unplug the AC plug and remove the bat­tery pack. Then contact your technical support office.
Do Not Disassemble This Product
The high-voltage areas inside may give you an electric shock, or foreign matter may enter and result in a fire.
Keep SD Memory Cards Away from Infants and Small Children
Accidental swallowing will result in bodily injury.
In the event of accidental swallowing, see a doctor immediately.
Do Not Place This Product on Unstable Surfaces
If balance is lost, this product may fall over or drop, result­ing in an injury.
Avoid Stacking
If balance is lost, this product may fall over or drop, result­ing in an injury.
Do Not Leave This Product in High Temperature Envi­ronment for a Long Period of Time
Leaving this product where it will be exposed to extremely high temperatures such as near fire or in direct sunlight may deform the cabinet and/or cause trouble in the inter­nal parts. Continued use in such a resulting condition may lead to short-circuiting or insulation defects, etc. which may in turn lead to a fire or electric shocks.
Do Not Block the Ventilation Hole (Exhaust)
Using this product wrapped in cloth or on top of bedding or a blanket can block the ventilation hole and cause heat to build up inside, possibly resulting in a fire.
Hold the Plug When Unplugging the AC Plug
Pulling on the cord may damage the cord, resulting in a fire or electric shock.
Do Not Move This Product While the AC Plug Is Connected
The AC cord may be damaged, resulting in fire or electric shock.
• If the AC cord is damaged, unplug the AC plug immedi­ately.
Use Only the Specified AC Adaptor With This Product
Using an AC adaptor other than the one supplied (sup­plied with the unit or one sold separately as an accessory) may result in a fire.
Do Not Subject the AC Adaptor to Any Strong Impact
Using the AC adaptor after a strong impact such as being dropped may result in electric shock, short circuit, or fire.
Take a Break of 10-15 Minutes Every Hour
Using this product for long periods of time may have detri­mental health effects on the eyes or hands.
Do Not Look into the CD/DVD Drive
Looking directly at the internal laser light source may result in damage to eyesight.
Do Not Use Discs That Are Cracked or Deformed
Because the discs rotate at high speeds, damaged discs may break apart causing injury.
• Discs that are not round and discs that have been repaired using adhesives are similarly dangerous, and so should not be used.
Do Not Turn the Volume Up to Loud When Using Headphones
Listening at high volumes that overstimulate the ear for long periods of time may result in loss of hearing.
Do Not Connect a Telephone Line, or a Network Cable Other Than the One Specified, into the LAN Port
If the LAN port is connected to a network such as the ones listed below, a fire or electric shock may result.
• Networks other than 1000BASE-T, 100BASE-TX or 10BASE-T
• Phone lines (IP phone (Internet Protocol Telephone), Telephone lines, internal phone lines (on-premise switches), digital public phones, etc.)
Do Not Use With Exposing the Skin to This Product For a Long Period of Time
Using this product with exposing the skin to the heat source of this product or AC adaptor for a long period of time can cause a low-temperature burn.
Do not expose yourself to the hot wind from the venti­lation hole (exhaust) for a long period of time.
Low-temperature burns may result. Covering the ventilation hole (exhaust) with your hand or other object can cause heat to build up inside, possibly resulting in burns.
Do Not Expose the Skin To This Product When Using the Product In A Hot Or Cold Environment.
Burns, low-temperature burns, or frostbite may result.
• When it is necessary to expose the skin to this product such as to scan a fingerprint, perform the operation in the shortest time possible.
8
<Only for model with modem> Use the Modem With a Regular Telephone Line
Connection to an internal phone line (on-premise switches) of a company or business office, etc. or to a dig­ital public phone or use in a country or area not supported by the computer may result in a fire or electric shocks.
z
Do not place the computer near a television or radio receiver.
z Keep the computer away from magnets. Data stored
on the hard disk may be lost.
z This computer is not intended for the display of images
for use in medical diagnosis.
z
This computer is not intended for a use with connection of medical equipment for the purpose of medical diagnosis.
z Panasonic shall not be liable for loss of data or other
incidental or consequential damages resulting from the use of this product.
Precautions (Battery Pack)
Do Not Use With Any Other Product
The battery pack is rechargeable and was intended for the specified product. If it is used with a product other than the one for which it was designed, electrolyte leak­age, generation of heat, ignition or rupture may result.
Do Not Charge the Battery Using Methods Other Than Those Specified
If the battery is not charged using one of the specified methods, electrolyte leakage, generation of heat, ignition or rupture may result.
Do Not Throw the Battery Pack into a Fire or Expose It to Excessive Heat
Generation of heat, ignition or rupture may result.
Avoid Extreme Heat (Near the Fire, in Direct Sunlight, for Example)
Electrolyte leakage, generation of heat, ignition or rupture may result.
Do Not Insert Sharp Objects into the Battery Pack, Expose It to Bumps or Shocks, Disassemble, or Modify It
Electrolyte leakage, generation of heat, ignition or rupture may result.
• If this product is subjected to a strong impact, stop using it immediately.
Do Not Short the Positive (+) and Negative (-) Contacts
Generation of heat, ignition or rupture may result.
• Do not place the battery pack together with articles such as necklaces or hairpins when carrying or storing.
Do Not Use This Product With a Battery Pack Other Than the One Specified
Use only the specified battery pack (CF-VZSU71U) with your product. Use of battery packs other than those man­ufactured and supplied by Panasonic may present a safety hazard (generation of heat, ignition or rupture).
When battery pack has deteriorated, replace it with a new one
Continued use of a damaged battery pack may result in heat generation, ignition or battery rupture.
CAUTION:
Risk of Explosion if Battery is replaced by an Incorrect Type. Dispose of Used Batteries According to the Instructions.
ATTENTION:
Il y a risque d’explosion si la batterie est remplacée par une batterie de type incorrect. Mettre au rebut les batteries usagées conformément aux instructions.
58-E-1
58-F-1
z Do not touch the terminals on the battery pack. The
battery pack may no longer function properly if the contacts are dirty or damaged.
z Do not expose the battery pack to water, or allow it to
become wet.
z If the battery pack will not be used for a long period of
time (a month or more), charge or discharge (use) the battery pack until the remaining battery level becomes 30% to 40% and store it in a cool, dry place.
z This computer prevents overcharging of the battery by
recharging only when the remaining power is less than approx. 95% of capacity.
z The battery pack is not charged when the computer is
first purchased. Be sure to charge it before using it for the first time. When the AC adaptor is connected to the computer, charging begins automatically.
z Should the battery leak and the fluid get into your
eyes, do not rub your eyes. Immediately flush your eyes with clear water and see a doctor for medical treatment as soon as possible.
NOTE
z The battery pack may become warm during recharging
or normal use. This is completely normal.
z Recharging will not commence if internal temperature
of the battery pack is outside of the allowable tempera­ture range (0
“Battery Power”). Once the allowable range require­ment is satisfied, charging begins automatically. Note that the recharging time varies based on the usage conditions. (Recharging takes longer than usual when the temperature is 10
z
If the temperature is low, the operating time is shortened. Only use the computer within the allowable temperature range.
z
This computer has a high temperature mode function that prevents the degradation of the battery in high tempera-
ture environments. ( Power”) A level corresponding to a 100% charge for high temperature mode is approximately equivalent to an 80% charge level for normal temperature mode.
z The battery pack is a consumable item. If the amount
of time the computer can be run by using a particular battery pack becomes dramatically shorter and repeated recharging does not restore its performance, the battery pack should be replaced with a new one.
z When transporting a spare battery inside a package,
briefcase, etc., it is recommended that it be placed in a plastic bag so that its contacts are protected.
z Always power off the computer when it is not in use.
Leaving the computer on when the AC adaptor is not connected will exhaust the remaining battery capacity
(
Î
°
C to 50 °C) (Î
°
C or below.)
Î
Reference Manual “Battery
Reference Manual “LAN”).
A lithium ion battery that is recycla­ble powers the product you have purchased. Please call 1-800-8-BATTERY for information on how to recycle this battery.
L’appareil que vous vous êtes procuré est alimenté par une bat­terie au lithium-ion. Pour des renseignements sur le recyclage de la batterie, veuillez composer le 1-800-8-BATTERY.
Reference Manual
48-M-1
Getting StartedUseful InformationTroubleshootingAppendix
9
Description of Parts
A
B C
D E
F A
G
H
I
J C K
L
M
N
O Q
P
Q
R
A : Wireless WAN antenna
<Only for model with wireless WAN>
Getting Started
Î Reference Manual “Wireless WAN”
B : Bluetooth antenna
<Only for model with Bluetooth> Î Reference Manual “Bluetooth”
C : Speaker
Î Reference Manual “Key Combinations”
D : Smart Card slot
<Only for model with Smart Card slot> Î Reference Manual “Smart Card”
E : CD/DVD Drive
Î Reference Manual “CD/DVD Drive”
F : Wireless LAN antenna
<Only for model with wireless LAN> Î Reference Manual “Wireless LAN”
G : Web Camera
<Only for model with Web Camera> To use the Web Camera, the software corresponding to the web camera is needed.
H : LCD
Î <Only for model with touchscreen>
Reference Manual “Touchscreen”
I : Power switch J : Function key
Î Reference Manual “Key Combinations”
K : Fingerprint Reader
<Only for model with Fingerprint Reader> Î Reference Manual “Fingerprint Reader”
L : Keyboard
M : LED indicator
: Caps lock : Numeric key (NumLk) : Scroll lock (ScrLk) : Drive status : SD Memory Card status
(Blinking: During access or a password is requested)
Î Reference Manual “SD Memory Card”
: Wireless ready
This indicator lights when Wireless LAN, Blue­tooth, and/or Wireless WAN are connected and ready. It does not necessarily indicate the On/Off condition of the wireless connection.
Î Reference Manual “Disabling/Enabling Wireless Communication” “Wireless LAN” “Blue­tooth” “Wireless WAN”
: Battery status
Î Reference Manual “Battery Power”
: Power status
(Off: Power off/Hibernation, Green: Power on, Blinking green: Sleep
Cannot power on or resume due to low tempera­ture.)
N : Microphone jack
A condenser microphone can be used. If other types of microphones are used, audio input may not be pos­sible, or malfunctions may occur as a result.
O : Headphone jack
You can connect headphones or amplified speakers. When they are connected, audio from the internal speakers is not heard.
P : Carrying handle Q : Stylus Holder R : Touch pad
*1
Windows XP : Standby
*1
, Blinking green rapidly:
10
Right side
AB C D EFGH
Rear side Bottom
Q R
S T
IFJK L OPMN
A : Battery pack
Specified Battery pack: CF-VZSU71U
B : ExpressCard slot
*2
/ PC Card slot
*3
Î Reference Manual “PC Card / ExpressCard”
*2
Only for model with ExpressCard slot
*3
Only for model without ExpressCard slot
C : PC Card slot
Î Reference Manual “PC Card / ExpressCard”
D : SD Memory Card slot
Î Reference Manual “SD Memory Card”
E : Wireless switch
Î
Reference Manual “Disabling/Enabling Wireless
Communication” “Wireless LAN” “Bluetooth” “Wireless WAN”
F : USB 2.0 port
Î Reference Manual “USB Devices”
G : USB 3.0 port
Î Reference Manual “USB Devices”
H : DC-IN jack I : LAN port
Î Reference Manual “LAN”
J : HDMI Port
Î Reference Manual “External Display”
K : VGA port
Î Reference Manual “External Display”
L : Ventilation hole (Exhaust) M : Security lock
A Kensington cable can be connected. For further information, read the manual that comes with the cable.
N : SIM Card slot
<Only for model with Wireless WAN> Î Reference Manual “Wireless WAN”
O :
2nd LAN Port*4 / Modem Port*5 / IEEE 1394 Interface Connector
*4
Only for model with 2nd LAN
Î Reference Manual “LAN”
*5
Only for model with Modem
Î Reference Manual “Modem”
*6
Only for model with IEEE 1394
Î Reference Manual “IEEE 1394 Devices”
P : Serial port Q : Expansion bus connector
Î Reference Manual “Port Replicator”
R : RAM module slot
Î Reference Manual “RAM Module”
S : Battery latch T : Hard disk drive
Î Reference Manual “Hard Disk Drive”
NOTE
z When you open the covers on
the right side or the rear side, push down and pull the covers.
z This computer contains a
magnet and magnetic prod­ucts at the locations circled in the illustration at right. Avoid leaving metallic object or mag­netic media in contact with these areas.
*6
Getting StartedUseful InformationTroubleshootingAppendix
(Example: rear side)
Attaching the stylus to the computer
Use the tether to attach the stylus to the computer so you will not lose it. There are holes (A) to attach it.
1 2 3 4
A
11
Loading...
+ 25 hidden pages