Panasonic BB-HPL11 Instruction Manual
Instruction manual
eo Light PLC Adapter
Bi Over Bi Over Etch plc
Model number
BB-HPL11
Thank you,eo Light PLC I sign up for the adapter, thank you for choosing
I was there.
■Please read the instruction manual, please use it correctly.
For safety precautions, separate volume of the "when the / Troubleshooting Before use" Three ~
Six Please read the page always.
Feature
■Anywhere I can stable network connection all over the house※ One
eo Light PLC Adapter (hereinafter, referred to as adapter) to the next generation of the home network
In which "HD-PLCIt will provide. "
You can use anywhere in the house high-speed Internet communications and high-performance data
transfer.
■Access point for all of the power outlet is the home network
Will※ Two
"HD-PLC"Does the data communication using a power line that supplies power.
Because the existing power outlet is the access point, between each room LAN Kee
You do not need to be wired in Bull.
■Fifteen It can be added to the die
Child machine Fifteen Stand I (recommended maximum number) can be added※ Three.
When you want to connect to a network in another room, you can expand the handset easily.
■High-speed communication, also in data communication AES128 bit By adopting the
encryption method
Have you
※Maximum 190 Mbps(PHY Speed) Four, Advanced error correction,AES128 bit Encryption
In the manner,PLC Adapter provides a comfortable high-speed communication.
"HD-PLCFor more information about "SixPlease refer to the page.
※ One The use of this equipment by radio laws and regulations has been limited to indoor. Communication through the
outdoor wiring (for example,
Please do not use to communicate) between the main house and away.
Also, depending on the state of use of the power line, it may affect the data communication.
※ Two Depending on the state of use of the power line, it may not be available outlet.
※ Three "HD-PLC"The standard of the product you have is displayed below.
Adapter name of the third-party products, might be different with this manual.
(Example: The parent machine = master adapter, the handset = terminal adapter)
If you are using a third-party equipment, Please read a third-party manual, this equipment
Please register registration, or the equipment.
※ Four This is the highest communication speed on the theory.
Actual maximum communication speed TCP In 55 Mbps It is.
Communication speed of the power line state, network environment, and influenced by other factors
You only. For detailed information, specifications (+ 26 Please refer to the page).
Two
Table of
contents
Before use
Use
Use
Of
Before
To
Introduction .................................................. four
●Check the body and the accessory attached goods ........................... .4
●About Mark / notation that you are using for the manual (this document) ......... .5
●"HD-PLC"The ........................................ .6
Names and functions of each part ...................................... 8
Please
Ready
Bei
To
That
Level
Prepare the adapter ......................................... 9
●I make sure the base unit, handset change-over switch .......................... .9
●You want to register the adapter..................................... 10
Install
Setting
Install ................................................. 12
●We installed the adapter..................................... 12
●Make sure the communication speed..................................... 13
●You want to connect the network equipment .............................. 14
To
That
Location
Other Features
Its
Of
Other
Of
Machine
Noh
Other Features ............................................. 15
●The operation of the lamp ................................... 15
●Initialize the adapter ................................... 16
●About setting screen ...................................... 17
●You want to display the setting screen..................................... 19
●Specification ................................................ 26
Before you use the equipment, the separate "when the / Troubleshooting Before use"
And "Safety Precautions", "ask for where I am correct use" (+ 3 ~ Ten
Please read the page) always.
●When I thought failure kana, the separate volume "in when / Troubleshooting Before use"+11 ~(
Twelve Please read the page).
●
Three
Introduction
Check the body and the accessory attached goods
Before you start using, please check the main body and the accessory attached goods. Should, flawed
Once there was, sorry to trouble you, but K-Opticom Contact Customer Center
Give me.
■Body
●
■Accessories
●
eo Light PLC Adapter ............ 1 Platform
Power cord ............................ 1 This
(Code lengthAbout 1 m)
●
LAN Cable ...................... 1 This
(Cable lengthAbout 1 m)
■Appended goods
Three□Instruction manual (this document).............
1Section
□Before use /
If you're in a pinch ................. 1 Section
□Quick Guide ................. 1 Section
□Release Notes ............. 1 Section
□In order to use comfortably .... 1 Section
Four
About Mark / notation that you are using for the manual (this document)
●
Please
Use
Use
Of
Before
To
+..........
.....
It shows the page that I would like you to see.
Operational, and describes important matters and prohibitions would like amulet
It has. Please be sure to read.
●
●
..... And you have described the relevant knowledge, such as convenient to use type or
advice
You.
About notation in this book]
●
In this document eo Light PLC The adapter I am described as "adapter".
[Trademarks / registered trademarks]
Microsoft,Windows,Internet Explorer And Windows Vista The United States
Microsoft Corporation Registered trademarks or trademarks in the United States and other countries
It is.Windows Of the official name,Microsoft Windows Operating System It is.
Microsoft Corporation We're using the screen photos in accordance with the guidelines.
●"HD-PLCThe name of the high-speed power line communication system proposed by Matsushita Electric
Industrial Co., Ltd. and "
It is.
●"HD-PLC"It is a trademark of Matsushita Electric Industrial Co., Ltd..
●Such as company names and product names All other trademarks or registered trademarks of their respective
companies.
●
Five
Introduction
"HD-PLC"The
"HD-PLC"Is new that by using existing power lines (indoor electrical wiring) for data communication
It is arbitrary communication technology.
"HD-PLC"Network using has been configured in the master unit and the slave unit.
Just plug each of the power plug into a power outlet,LAN Of cable
Wiring and difficult places, can not be wireless communication for such obstacles as the walls of the room
Toko
Rodemo, you will be able to data communication.
LANConnected by a cable
When you
Difficult wiring...
When you connect a wireless
Internet
Line terminating equipment
/
VDSLModem
Broadband
Router
By an obstacle such as a wall
Radio waves do not reach...
Personal computer
Base unit
Power outlets
Cordless
handset
Power outlets
PLCWhen you use the adapter,
Since use of existing power lines, power supply
If there is an electrical outlet, and you like the house
Internet can be in place!
Six
It can be used only by inserting the power plug into a power outlet
Please
Use
Use
Of
Before
To
Of the parent machine LAN The port, broadband router and the line terminating equipment / VDSL Modem
The connection, the handset LAN The port, personal computer, network cameras, net
Please connect the network equipment such as a work printer. Each of the net
Plug the power plug of the adapter that is connected to the work equipment to a power outlet
A network communication I can. (+ 14 Page)
Child machine Fifteen Stand I can be registered (recommended
maximum number)
Broadband If you want to connect multiple network devices to the Internet
Router is required.
If you are adding a slave unit, please first register on the base unit. (+ 10 Page)
A switching hub to the child device
Once connected, Towakune~tsu
EquipmentEightIt can be connected to
the die
You.
Network camera
Cordless
handset
Power outlets
A plurality of network
The equipment to Internet
If you want to connect Broad
Need to band router
Will you
Internet
Power outlets
Base unit
Broad
Band
Router
Line terminating
equipment /
VDSLModem
Switching
Hub
Personal computer
Power outlets
Cordless
handset
Personal computer
■For the parent unit and the slave
unit
"HD-PLCNetwork using the "consists of a base unit and a cordless handset.
The adapter at the time of registration, in either of the parent device or the child device in the parent
machine, cordless handset change-over switch
But you can be set. (+ 9 Page)
However, it can be registered as the parent machine One Table only.
Please register as a slave unit other adapter.
●If you are using a broadband router, the parent unit of the router LAN And directly to the port
It is recommended that you connect.
●If you do not use a broadband router, the parent machine line terminating equipment / VDSL Model
'Em LAN Please connect to the port.
●
Seven
Names and functions of each part
(4)
(5)
(1)
(2)
(3)
(6)
(7)
(8)
(One)PLC Lamp
"HD-PLCIt will light green when the "network connection. (+ 15 Page)
(Two)LAN Lamp
LAN It will light green when the cable connection. During transmission and reception of data is flashing
green
To you. (+ 15 Page)
(Three) Base unit (MASTER) Lamp
Lights only green when it is set as a master unit. (+ 15 Page)
(Four) Setting button
When the adapter registration (+ 10 Page), when the communication speed confirmation (+ 13 Use the page)
To you.
(Five) Base unit handset switching switch
You can set the "base unit" / "child machine". (+ 9 Page)
When the adapter registration, to set as the master unit is in the "master unit" and set as a slave unit
Please switch to "handset" If you are a constant is. (+ 10 Page)
(Six) Power cord outlet
The power cord into the power cord outlet, the difference the power plug into a power outlet
Adapter power supply enters When Komu death.
(Seven) Initialization button
It will initialize the adapter. When you perform initialization, for communication between the master unit and
the slave unit
Registration information will be erased. (+ 16 Page)
(Eight)LAN Port
The adapter LAN Network equipment (broadband router with a cable,
Switching hub, computer, network cameras, network printer
It is connected to, etc.). (+ 14 Page)
Eight
Prepare the adapter
I make sure the base unit, handset change-over
switch
Please
Use
Use
Of
Before
To
The first time "HD-PLCWhen it is "in to use, it is necessary to set the master unit and the slave unit
There.
This adapter is, of that was delivered One Die parent machine, Necessary to set the base subsequent to the
child deviceTwo
I have. Please check the base unit, handset selector switch for each adapter.
Adapter One Table is the parent machine, Stand onward is that it is to the child
deviceTwo
I check the
Level
Bei
To
That
Confirmation of the
parent machine
Confirmation of the
handset
●
When operating the base unit handset switching switch, disconnect the power cord (power OFF)
Please switch in the state.
●
The adapter that is the parent device side in the mode selector switch "parent machine" To become a
slave unit,
The adapter is that I called the "handset".
Nine
Loading...