Panasonic AW-HE100 User Manual
Panasonic Broadcast
AW-HE100
Menu Information
40
Basic menu operations
Menus are displayed on the monitor when the unit’s settings are to be selected.
The monitor is connected to the video signal output connector (VIDEO OUT connector or HD/SD ANALOG connector).
The basic menu operations involve displaying sub-menus from the main menu items, and selecting settings on the sub-menus.
Some sub-menus have menu items for performing more detailed settings.
The menu operations are conducted using the accessory wireless remote control.
If a controller is connected, they can also be conducted using the controller.
It may be necessary to upgrade the controller’s version in order to support the AW-HE100.
For further details, consult with your dealer.
Described below are the basic operations for changing the menu item settings using the accessory wireless remote control and
controller (AW-RP655, AW-RP555 or AW-RP400/AW-CB400).
Only the steps taken using the accessory wireless remote control will be described here for the operations conducted to
select and set the items.
For details of the operations conducted using the controller, substitute “controller” for “wireless remote control” when reading
the basic operations.
Also, refer to the Operating Instructions of the controller.
Table of operations
Menu operation Remote control
Controller
AW-RP655 AW-RP555
AW-RP400/AW-CB400
(The following operations
are performed using the
A
W-CB400.)
Selecting the
camera to be
operated
Press the [CAM1],
[CAM
2], [CAM3] or
[CAM4] button.
Press one of the [1] to [5]
buttons of [CONTROL/
PREVIEW MONITOR OUT
SEL].
Press one of the [1] to [5]
buttons of [CONTROL].
Press one of the [1] to [5]
buttons of [CONTROL
SELECT].
Displaying the
main menu
Press the [MENU]
button for two
seconds.
1.
Press the [MENU] button.
The display on the
AW-RP655’s LCD panel
changes to the menu mode.
2. Turn the jog dial (main), and
display “CAMERA SETTING”
on the LCD panel.
3. Press the [OK] button, and
display “OPEN CAMERA
MENU? OK Key” on the
LCD panel.
4. Press the [OK] button again.
Press the [MENU] button for
two seconds.
Press the [A] button of
[OPTION SW] for two seconds.
Selecting the
items
Press the [] or []
button.
Turn the jog dial (L).
Press the [MENU] or [ITEM]
button.
Press the [A] or [B] button of
[OPTION SW].
Displaying the
sub-menus
Press the [] or []
button.
Press the jog dial (L). Press the [YES] button.
Press the [C] button of
[OPTION SW].
Returning to the
previous menu
Press the [] or []
button while “Return”
is blinking.
Press the jog dial (L) while
“Return” is blinking.
Press the [YES] button while
“Return” is blinking.
Press the [C] button of
[OPTION SW] while “Return”
is blinking.
Changing the
settings
Press the [] or []
button.
Turn the jog dial (R). Press the [YES] or [NO] button.
Press the [C] or [D] button of
[OPTION SW].
Exiting the menu
operations
Press the [MENU]
button for two
seconds.
Press the [MENU] button or
[R/B GAIN/PED] button.
Press the [MENU] button for
two seconds.
Press the [A] button of
[OPTION SW] for two seconds.
Perform the menu operations and exit from the menus using the controller which displayed the main menu.
If a menu operation has been performed or a menu has been exited using another controller, first display the main menu
and exit from it using one controller, and then display the main menu and exit from it using the other controller.
Note
41
When performing the operations using the accessory wireless
remote control
1 Press the [CAM1], [CAM2], [CAM3] or [CAM4] button to select the unit which is to be
operated.
2 Press the [MENU] button for two seconds.
The main menu is displayed.
3 Press the [] or [] button to make the item to be selected blink.
Each time the [] or [] button is pressed, the blinking item changes.
4 Press the [] or [] button.
The sub-menu of the selected item is displayed.
(Some sub-menu items have a sub-menu of their own.)
5 Press the [] or [] button to make the item to be set or the setting blink.
Each time the [] or [] button is pressed, the blinking item changes.
When “Return” is made to blink and the [] or [] button is pressed, operation returns to the previous menu.
While the menus are displayed, the [] and [] button have the same functions.
Bear in mind, however, that if the [] button is pressed when it is possible to change a value, the value will be changed by
the button.
6 Press the [] or [] button to change the setting.
7 After the setting has been completed, press the [MENU] button for two seconds.
The menu display is exited.
Basic menu operations
42
When the camera is to be controlled from the AW-RP655 controller
Jog dial (main)
When the LCD is in the gain adjustment mode
(GAIN button: MANU)
Select the desired gain setting from GAIN 0 dB to 18 dB.
When the LCD is in the gain adjustment mode
(GAIN button: AUTO)
Select the desired gain setting from AGC MAX GAIN 6 dB,
12 dB or 18 dB.
When the LCD is in the pedestal adjustment mode
Adjust the PEDESTAL TOTAL setting (–30 to +30).
This operation is invalid when the controller is in the camera
menu mode.
Each time the [EXT(AF)] button is
pressed, the mode switches between
Auto Focus and Manual Focus.
The [EXT(AF)] button lights when the
camera is in the Auto Focus mode.
These buttons cannot be used
for controlling the AW-HE100.
GAIN
button
Jog dial (L)
When the LCD is in the gain adjustment mode
Adjust the R GAIN setting (–30 to +30).
When the LCD is in the pedestal adjustment mode
This operation is not available.
When the camera menu mode is established
(Operate menu items)
Changing items in the camera menu:
• Turn clockwise: Moves downward.
• Turn counterclockwise: Moves upward.
• Press: Confirms the item selection*1.
*1: Operation must be performed carefully, as pressing this jog
dial, when the set value can be changed, will change the set
value (in the positive direction).
Jog dial (R)
When the LCD is in the gain adjustment mode
Adjust the B GAIN setting (–30 to +30).
When the LCD is in the pedestal adjustment mode
This operation is not available.
When the camera menu mode is established
(Change set value)
Changing the set values in the camera menu:
• Turn clockwise: Set value is changed in the positive
direction*2.
• Turn counterclockwise: Set value is changed in the negative
direction.
• Press: Operation unavailable.
*2: Operation must be performed carefully, as pressing this jog
dial, when the item can be changed, will confirm the item
selection.
When
controlling the AW-HE100, the G/L SETTING is not displayed. The G/L must be set using the camera menu of
the AW-HE100.
Changes made using the wireless remote control to the PEDESTAL (TOTAL) in the camera menu of the AW-HE100
are not reflected on the LCD panel display of the AW-RP655.
1 Press one of the [1] to [5] buttons of [CONTROL/PREVIEW MONITOR OUT SEL] to select the
unit which is to be operated.
2 Press the [MENU] button.
The display on the LCD panel of the AW-RP655 is set to the menu mode.
3 Turn the jog dial (main) and display “CAMERA SETTING” on the LCD panel.
4 Press the [OK] button.
The right display appears on the LCD panel:
OPEN CAMERA MENU?
OK Key
Basic menu operations
43
Basic menu operations
5 Press the [OK] button again.
The right display appears on the LCD panel:
CAMERA MENU CTRL.
ITEM SEL. VALUE SEL.
6 Turn the jog dial (L) to make the item to be selected blink.
Each time the jog dial (main) is pressed, the blinking item changes.
7 Press the jog dial (L).
The sub-menu of the selected item is now displayed.
(Some sub-menu items have a sub-menu of their own.)
8 Turn the jog dial (L) to make the item to be set or the setting blink.
Each time the jog dial (L) is turned, the blinking item changes.
When the “Return” is made to blink and the jog dial (L) is pressed, operation returns to the previous menu.
9 Turn the jog dial (R) to change the setting.
10
After the setting has been completed, press the [MENU] button or [R/B GAIN/PED] button.
The menu display is exited.
Press other buttons, when in the camera menu mode, to exit the menu mode.
Perform operations
1 to 5 in order to again perform operations in the exited menu mode.
It may be necessary to upgrade the software version in order to operate an AW-HE100 from a AW-RP655.
Ask your dealer for details.
44
Basic menu operations
When the camera is to be controlled from the AW-RP555 controller
Press the [MENU] button for two seconds. The camera menu becomes available for operation.
[MENU]: Opens the menu and also scrolls up the item list.
[ITEM]: Scrolls down the item list.
[YES]: Confirms the item selection and also changes a set value in the positive direction.
[NO]: Changes a set value in the negative direction.
Each time the [EXT(AF)] button is pressed,
the mode switches between Auto Focus and
Manual Focus. The [EXT(AF)] button lights
when the camera is in the Auto Focus mode.
These buttons cannot be used
for controlling the AW-HE100.
1 Press one of the [1] to [5] buttons of [CONTROL] to select the unit which is to be operated.
2 Press the [MENU] button for two seconds.
The main menu is displayed on the monitor.
3 Press the [MENU] or [ITEM] button to make the item to be selected blink.
Press the [MENU] button to scroll up the item list.
Press the [ITEM] button to scroll down the item list.
4 Press the [YES] button.
The sub-menu of the selected item is displayed.
(Some sub-menu items have a sub-menu of their own.)
Loading...