Panasonic 9TAWX CC411, 9TAWX CC412 Users Manual

Center Module

Operating Instructions

Model No. WX-CC411

WX-CC412

ENGLISH

FRANÇAIS

ENGLISH VERSION

FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment should be installed and operated keeping the radiator at least 20cm or more away from person’s body (excluding extremities: hands, wrists, feet and ankles).

This device complies with Part 15 of FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device.

WARNING:

•This apparatus must be earthed.

•Apparatus shall be connected to a main socket outlet with a protective earthing connection.

•The mains plug or an appliance coupler shall remain readily operable.

•To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

•The apparatus should not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, should be placed on the apparatus.

•All work related to the installation of this product should be made by qualified service personnel or system installers.

•To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.

•The connections should comply with local electrical code.

•The risk of hearing impairment due to exposure to excessive sound levels may be reduced by listening at lower volumes and for shorter durations.

Operating near 2.4 GHz electrical appliances may

cause interference. Move away from the electrical appliances.

This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.MEDICAL:

Consult the manufacturer of any personal medical devices, such as pacemakers, to determine if they are adequately shielded from external RF (radio frequency) energy. (The unit operates in the frequency range of 2.412 GHz to 2.462 GHz, and the power output level is 0.1 watts.)

Do not use the unit in health care facilities if any regulations posted in the area instruct you not to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF (radio frequency) energy.

• The installation shall be carried out in accordance with all applicable installation rules.

To prevent fire or electric shock hazard, do not expose this apparatus to rain or moisture.

For U.S.A.

CAUTION:

The FCC ID number for this radio equipment is listed below.

FCC ID: ACJ9TAWX-CC411

FCC ID: ACJ9TAWX-CC412

CAUTION:

•Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

•These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Shielded (STP) LAN cables must be used with this unit to ensure compliance with EMC standards.

For U.S.A.

This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material – special handling may apply.See www.dtsc.ca/gov/hazardouswaste/perchlorate/

For Canada.

ICES-003

CAN ICES-3(A)/NMB-3(A)

For Canada.

RSS-Gen

• Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.

A lithium-ion battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY for information on how to recycle this battery.

Important Safety Instructions

1)Read these instructions.

2)Keep these instructions.

3)Heed all warnings.

4)Follow all instructions.

5)Do not use this apparatus near water.

6)Clean only with dry cloth.

7)Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

8)Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

9)Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

10)Only use attachments/accessories specified by the manufacturer.

11)Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

12)Unplug this apparatus during lightning storms or when unused for long periods of time.

13)Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped

(1) Product outline

Preface

Center Module WX-CC411, WX-CC412 is exclusively designed for Panasonic Wireless Communication System, which is used with drive-thru menu boards, etc. The system operates on 1.9 GHz DECT.

Features

-Center Module WX-CC411, CC412 provides the central control function to DWCS.

-They are used at Drive-Through Restaurants: WX-CC411 for single lane, and WX-CC412 for dual lane.

-1.9GHz DECT Technology provides high stable communication with wider coverage area, higher speech intelligibility and little interference.

-Strong Echo canceller and Digital Noise Reduction (DNR) provide higher speech intelligibility.

-Wall mount enclosure allows lower and easier installation.

-A center module can register up to 32 portable units. Four people can talk at the same time per lane.

-7 inch Color LCD with touch panel provides easy operation.

-IP Network connection (via Ethernet) provides remote operation capability.

-Using SD card, it’s possible to Backup and Restore settings. In addition, the restaurant’s own messages can be saved.

-Built-in scheduler can replace greeter messages at a specified time, and it can also play reminder messages automatically.

-Panasonic IP cameras can be registered up to 4 units, and their videos can be checked with the LCD of center module.

-On receiving alert signal, it’s possible to transfer alert message to the portable unit, output the signal to external devices, and send alert E-mail to the outside of the store as well.

Precautions

Handle this product with care. The product contains sensitive components that can be damaged by improper handling or storage.

Repair or replace any defective components.

Use this product for indoor use only.

Do not expose this product to direct sunlight for hours and do not install the product near a heater or an air conditioner. Otherwise, it may cause deformation, discoloration and malfunction. Keep this product away from water.

Avoid installing in the following locations.

-Locations where a chemical agent is used such as a swimming pool

-Locations under the air conditioner

-Locations near the fryer

-Locations near the grill

-Locations in a humid or dust-laden environment

-Locations near flammable gas or vapor

-Locations where radiation or x-ray emissions are produced

-Locations subject to strong magnetic field or radio waves

-Locations where corrosive gas is produced

-Locations where it may be damaged by briny air such as seashores

-Locations subject to vibrations (This product is not designed for on-vehicle use.)

Be sure to remove this product if it is not in use.

Avoid connections during a lightning storm. Otherwise, an electric shock may be caused.

(2) Name and descriptions of each parts and basic screen

Appearance	(1) LCD Touch Panel

a b c

(1) 7 inch color touch panel LCD

7 inch color touch panel LCD for operation and display.

a)Reset button

b)SD Card Slot

c)SD Card Access LED

Indication for SD Card Access Status

(2)

(3)

(4)

(5)

(2) Information Button

Display the status and configuration

(3)Settings button

Display the various setting screens.

(4) Camera button

Display the image on the screen by the network camera that is connected to the center module.

(5) Quick button

Display the Quick Control screen to be used in the store operation.