Panasonic 9TAWX CC2010Z Users Manual
Wireless Communication System
Center Module
Operating Instructions
Model No. WX-CC2010 Series
Digital Technology
WX-CC2010
TRANSCEIVER
MONITOR
POWER
VEHICLE
PRESENT
A
B
WX-
CT2020
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
IMPORTANT SAFETY INSTRUCTIONS
1)Read these instructions.
2)Keep these instructions.
3)Heed all warnings.
4)Follow all instructions.
5)Do not use this apparatus near water.
6)Clean only with dry cloth.
7)Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8)Do not use near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9)Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10)Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles and the points where they exit from the apparatus.
11)Only use attachments/accessories specified by the manufacturer.
12)Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-overs.
S3125A
13)Unplug this apparatus during lightning storms or when unused for long periods of time.
14)Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
3
CONTENTS |
|
IMPORTANT SAFETY INSTRUCTIONS ...................................................................................................... |
3 |
PREFACE..................................................................................................................................................... |
5 |
PRECAUTIONS............................................................................................................................................ |
6 |
PANASONIC WX-CC2010 SERIES SYSTEM PARTS AND ACCESSORIES ................................................ |
7 |
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS ..................................................................... |
8 |
■ WX-CC2010 Center Module ................................................................................................................. |
8 |
■ WX-C516 Power Transformer ............................................................................................................... |
12 |
■ WX-C1027A Headset............................................................................................................................ |
12 |
■ WX-C550 Speaker Microphone ............................................................................................................ |
12 |
■ WX-CT2020 Order Taker Unit............................................................................................................... |
13 |
PREPARATIONS ......................................................................................................................................... |
15 |
■ Installations and Connections ............................................................................................................. |
15 |
■ Battery Charge and Replacement (WX-CH2050A/WX-CT2020) ......................................................... |
15 |
■ Setup Procedures (WX-CH2050A/WX-CT2020) .................................................................................. |
15 |
■ Preparation .......................................................................................................................................... |
15 |
■ Maintenance of Headpad Accessories (WX-C1027A: Non-Scheduled) ............................................. |
16 |
OPERATING PROCEDURES ....................................................................................................................... |
17 |
TROUBLESHOOTING ................................................................................................................................. |
17 |
SPECIFICATIONS........................................................................................................................................ |
18 |
4
PREFACE
Panasonic WX-CC2010 Center Module is designed for Panasonic Wireless Communication System, which is used with drive-through menu boards, etc. The system operates on UHF frequencies, and offers multi-channel flexibility making use of the PLL (Phase Locked Loop) technology.
FEATURES
•A remote speaker can be added to the system.
•The order taker unit and all-in-one headset are designed to facilitate the battery installation.
New Functions of the WX-CC2010
(New Technological Features)
•New DNR (Digital Noise Reduction)
The New DNR function provides sound quality without noise that accompanies digital processing. (WXCC2010 Center Module has the sound quality of customer's voice which has been improved than that of WX-C1011 Center Module.)
•Talkback Echo Elimination
Digital delay processing eliminates talkback echo from the order taker unit.
•TBC (Talkback Automatic Level Control)
Only human voice is identified in a mixed input of customer's voice and noise from the menuboard microphone. Then, the volume of customer's voice is compared with the talk volume of the order taker unit, and the talkback volume level is automatically controlled.
5
Loading...