Panasonic 96NKX TGA710 Users Manual
Operating Instructions
Call Block dedicated Machine
Model No.
Thank you for purchasing a Panasonic product.
Please read these operating instructions before using the unit and save
them for future reference.
For assistance, visit our Web site: http://shop.panasonic.com/
support for customers in the U.S.A.
Please register your product: http://shop.panasonic.com/support
KX-TGA710
KX-TGA760
Printed in Malaysia
PNQX8877ZA PP1218MU0
Table of Contents
Introduction
Accessory information ...............3
Graphical symbols for use on
equipment and their
descriptions ...............................4
Important Information
For your safety ...........................5
Important safety instructions ......6
For best performance ................6
Other information .......................7
Specifications ............................7
Getting Started
Setting up ..................................8
Controls .....................................9
Display icons .............................9
Language setting .....................10
Basic Operation
Caller ID service ......................11
Caller list ..................................12
Call block .................................12
Allow list ...................................13
Useful Information
Error messages .......................15
Troubleshooting .......................15
FCC and other information ......18
Appendix
Customer services ...................20
Limited Warranty (ONLY FOR
U.S.A.) .....................................21
Index
Index.........................................23
2
Introduction
Accessory information
Supplied accessories
No. Accessory item/Part number Quantity
A AC adaptor/PNLV226-0X 1
B Telephone line cord/PNJA1210Z 1
A B
Other information
esign and specifications are subject to change without notice.
R D
R The illustrations in these instructions may vary slightly from the actual
product.
For a
ssistance, please visit http://shop.panasonic.com/support
3
Introduction
Graphical symbols for use on equipment and their descriptions
Symbol Explanation Symbol Explanation
Alternating current
(A.C.)
Direct current (D.C.) “ON” (power)
Protective earth “OFF” (power)
Class P equipment
(equipment in which
protection against
electric shock relies on
Double Insulation or
Reinforced Insulation)
Protective bonding
earth
Functional earth “ON”/“OFF” (power;
For indoor use only Caution, risk of electric
For assistance, please visit http://shop.panasonic.com/support
4
Stand-by (power)
push-push)
shock
Important Information
smoke has stopped emitting
For your safety
To prevent severe injury and loss
of life/property, read this section
carefully before using the product
to ensure proper and safe
operation of your product.
WARNING
Power connection
R Use only the power source
marked on the product.
R Do not overload power outlets
and extension cords. This can
result in the risk of fire or
electric shock.
R Completely insert the AC
adaptor/power plug into the
power outlet. Failure to do so
may cause electric shock and/
or excessive heat resulting in a
fire.
R Regularly remove any dust, etc.
from the AC adaptor/power plug
by pulling it from the power
outlet, then wiping with a dry
cloth. Accumulated dust may
cause an insulation defect from
moisture, etc. resulting in a fire.
R Unplug the product from power
outlets if it emits smoke, an
abnormal smell, or makes an
unusual noise. These
conditions can cause fire or
electric shock. Confirm that
For assistance, please visit http://shop.panasonic.com/support
and contact us at http://
shop.panasonic.com/support
R Unplug from power outlets and
never touch the inside of the
product if its casing has been
broken open.
R Never touch the plug with wet
hands. Danger of electric shock
exists.
Installation
R To prevent the risk of fire or
electrical shock, do not expose
the product to rain or any type
of moisture.
R Do not allow the AC adaptor or
telephone line cord to be
excessively pulled, bent or
placed under heavy objects.
Operating safeguards
R Unplug the product from power
outlets before cleaning. Do not
use liquid or aerosol cleaners.
R Do not disassemble the product.
R Do not spill liquids (detergents,
cleansers, etc.) onto the
telephone line cord plug, or
allow it to become wet at all.
This may cause a fire. If the
telephone line cord plug
becomes wet, immediately pull
it from the telephone wall jack,
and do not use.
5
Important Information
CAUTION
Installation and location
R Never install telephone wiring
during an electrical storm.
R Never install telephone line
jacks in wet locations unless the
jack is specifically designed for
wet locations.
R Never touch uninsulated
telephone wires or terminals
unless the telephone line has
been disconnected at the
network interface.
R Use caution when installing or
modifying telephone lines.
R The AC adaptor is used as the
main disconnect device. Ensure
that the AC outlet is installed
near the product and is easily
accessible.
Important safety instructions
When using your product, basic
safety precautions should always
be followed to reduce the risk of
fire, electric shock, and injury to
persons, including the following:
1. Do not use this product near
water for example, near a
bathtub, washbowl, kitchen
sink, or laundry tub, in a wet
basement or near a swimming
pool.
2. Avoid using this product during
an electrical storm. There may
be a remote risk of electric
shock from lightning.
3. Do not use this product to
report a gas leak in the vicinity
of the leak.
4. Use only the power cord
indicated in this manual. Check
with local codes for possible
special disposal instructions.
SAVE THESE INSTRUCTIONS
For best performance
Environment
R Keep the product away from
electrical noise generating
devices, such as fluorescent
lamps and motors.
R The product should be kept free
from excessive smoke, dust,
high temperature, and vibration.
R The product should not be
exposed to direct sunlight.
R Do not place heavy objects on
top of the product.
R When you leave the product
unused for a long period of
time, unplug the product from
the power outlet.
For assistance, please visit http://shop.panasonic.com/support
6
R The product should be kept
away from heat sources such
as heating devices, cooking
appliances, etc. It should not be
placed in rooms where the
temperature is less than 0 °C
(32 °F) or greater than 40 °C
(104 °F). Damp basements
should also be avoided.
Routine care
R Wipe the outer surface of the
product with a soft moist
cloth.
R Do not use benzine, thinner, or
any abrasive powder.
Other information
Notice for product disposal,
transfer, or return
R This product can store your
private/confidential information.
To protect your privacy/
confidentiality, we recommend
that you erase information such
as call block list or caller list
entries from the memory before
you dispose of, transfer, or
return the product.
Important Information
Notice
Specifications
R Power source:
120 V AC, 60 Hz
R Power consumption:
Standby: 1.0 W
Maximum: 4.3 W
R Operating conditions:
0 °C – 40 °C (32 °F – 104 °F),
20 % – 80 % relative air
humidity (dry)
For assistance, please visit http://shop.panasonic.com/support
7
LINE IN
PHONE
3
4 6
5
6
4
1
2
Getting Started
Setting up
Connections
Connect the AC adaptor to the
unit by pressing the plug firmly.
Fasten the cord by hooking it.
Connect the AC adaptor to the
power outlet.
Connect the telephone line
cord for your external phone
to the unit ("LINE IN" port),
then to the single-line
telephone jack (RJ11C) until
you hear a click.
A DSL/ADSL filter (not
supplied) is required if you
have a DSL/ADSL service.
Connect the supplied
telephone line cord to the unit
("PHONE" port), then connect
to your external phone.
Note:
R Use only the supplied
Panasonic AC adaptor
PNLV226.
Note when setting up
Note for connections
R The AC adaptor must remain
connected at all times. (It is
normal for the adaptor to feel
warm during use.)
R The AC adaptor should be
connected to a vertically
oriented or floor-mounted AC
outlet. Do not connect the AC
adaptor to a horizontally
For assistance, please visit http://shop.panasonic.com/support
8
Loading...