Panasonic 96NKX TC1743 User Manual

900MHz Cordless Answering System
Pulse-or-tone dialing capability
Model No.
KX-TC1743B
PLEASE READ BEFORE USE AND SAVE.
Charge the battery for about 15 hours before initial use.
Contents:
Connections . . . . . . . . . . . . . . . . . . . . . . 6
Battery Charge . . . . . . . . . . . . . . . . . . . 7
Selecting the Dialing Mode. . . . . . . . . . . 8
Recording a Greeting Message . . . . . . . 9
Making/Answering Calls . . . . . . . . . . . . 10
Caller ID Service . . . . . . . . . . . . . . . . . 12
Speed Dialer. . . . . . . . . . . . . . . . . . . . . 12
Automatic Answering Operation . . . . . . 13
Listening to Messages . . . . . . . . . . . . . 13
Important Safety Instructions . . . . . . . . 14
FCC and Other Information. . . . . . . . . . 16
OPERATING INSTRUCTIONS
– 2 –
Please read IMPORTANT SAFETY INSTRUCTIONS on pages 14– 15 before use. Read and understand all instructions.
Thank you for purchasing your new Panasonic cordless telephone.
Attach your purchase receipt here.
For your future reference
Serial No. Date of purchase (found on the bottom of the unit)
Name and address of dealer
– 3 –
Location of Controls
Handset
Charge Contacts
Microphone
(OFF) Button
(Speakerphone) Button
(Talk) Button
Antenna
Display
Navigator key ((›), (‹), (fi), EDIT (fl))
(INTERCOM/HOLD/CLEAR)
Button
(REDIAL/PAUSE/FUNCTION)
Button
Headset Jack
(TONE) Button
(FLASH/CALL–WAIT/PLAYBACK)
Button
Speaker
Back side
– 4 –
Base unit
IN USE/CHARGE Indicator
Antenna
CALLER ID Indicator
(TONE) Button
(AUTO/PROGRAM) Button
(LOCATOR/INTERCOM) Button
(HOLD/RINGER) Button
(REDIAL/PAUSE) Button
(DIGITAL–SP-PHONE) (Speakerphone)
Button and Indicator
MIC (Microphone)
(FLASH/CALL–WAIT)
Button
Charge Contacts
VOLUME (_), (^) Buttons
Display
– 5 –
Base unit
(NEW–MESSAGE) Button
(STOP) Button
(ANSWER–ON) Button and Indicator
(ERASE) Button
(GREETING) Button
(REPEAT) Button
(SKIP) Button
– 6 –
Connections
USE ONLY WITH Panasonic AC ADAPTOR KX-TCA1 (Order No. KX-TCA1-G).The AC adaptor must remain connected at all times. (It is normal for the
adaptor to feel warm during use.)
Telephone Line Cord
Single-Line Telephone Jack (RJ11C)
Power Outlet (AC 120 V, 60 Hz)
AC Adaptor
Hook
Raise the antenna.
Fasten the AC adaptor cord to prevent it from being disconnected.
Loading...
+ 13 hidden pages