Panasonic 96NKX-PRXA10 Users Manual
Installation Manual
Additional Digital Cordless Handset
Model No. KX-PRXA10
Thank you for purchasing a Panasonic product.
This unit is an additional handset compatible with the following series of
Panasonic Digital Cordless Phone:
- KX-PRX120 (KX-PRXA10)
(The corresponding models are subject to change without notice.)
You must register this handset with your base unit before it can be used. This
document describes only the steps needed to register and begin using the
handset. Please read the base unit’s documentation for further details.
Please read this document before using the unit and save it for future reference.
For assistance, visit our Web site: http://www.panasonic.com/help
for customers in the U.S.A. or Puerto Rico.
Printed in China
PNQX6195ZA
CC1213YK0 (E)
PRXA10_IM_(en-en)_1122_ver.020.pdf 1 2013/11/22 14:50:51
Supplied accessories
Accessory item/Order number Quantity
Charger/PNLC1049ZW 1
AC adaptor/PNLV226KZ 1
Rechargeable battery/KX-PRA10EX 1
Handset cover
*
1
/M81101016740
1
*1 The handset cover comes attached to the handset.
N
ote:
R Please read the base unit’s documentation for additional/replacement
accessories.
Preparing the charger
n KX-PRXA10
A Insert the AC adaptor plug to the unit until you
h
ear a click.
A
B
B Connect the AC adaptor to the power outlet.
Note:
R U
se only the supplied Panasonic AC adaptor PNLV226KZ.
R The AC adaptor must remain connected at all times. (It is normal for the adaptor
to feel warm during use.)
Preparing the handset
Inserting microSD card and the battery
A
microSD card (not supplied) allows you to expand the handset’s storage
capabilities.
Important:
R Use only the supplied battery. For replacement, use only the Panasonic
rechargeable battery noted on page 2.
2
For assistance, please visit http://www.panasonic.com/help
Installation
PRXA10_IM_(en-en)_1122_ver.020.pdf 2 2013/11/22 14:50:51
R W
hen removing the battery, make sure you turn off the handset first.
R To avoid loss of data or malfunction, do not damage, carelessly handle, or
short-circuit the gold-colored contacts of the microSD card.
1
Remove the handset’s cover.
2
Open the microSD card cover by
s
liding it toward the nearest side
of the handset (A) and then lifting
up (B).
A
B
3
Insert the microSD card with the
g
old-colored contacts facing
down, close the microSD cover
(A), and then gently slide the
cover toward the opposite side of
the handset (B).
B
A
4
Insert the battery (A)
and lower it
into the handset (B).
A
B
5
Attach the cover.
Note:
R I
f the battery is fully charged, but the operating time seems to be shorter, clean
the charge contacts of the handset and charger with a dry cloth and charge
again.
For assistance, please visit http://www.panasonic.com/help
3
Installation
PRXA10_IM_(en-en)_1122_ver.020.pdf 3 2013/11/22 14:50:51
Charging the handset
Charge the handset for about 5 hours before initial use. The charge indicator (A)
lights while the handset is charging and turns off when the handset is fully charged.
Important:
R If the handset is placed into the charger while talking on the phone, the call is
not disconnected.
A
or
A
Place the handset into the charger. Connect a USB cable (not
s
upplied) directly to the handset.
Turning on the handset
T
o turn the handset on, press and hold the power button on the top of the handset.
Setup wizard
The first time you turn on the handset, the setup wizard prompts you to configure
initial settings such as the display language. Follow the on-screen instructions to
configure the handset.
Registration dialog
While using the setup wizard, a dialog may be displayed prompting you to press
the M
N
on the base unit for 5 seconds. Follow the on-screen instructions to
register the handset to the base unit. When registration is complete, continue to
follow the setup wizard.
Registering the handset to the base unit
I
f the handset is not registered, the registration dialog (page 4) is displayed. Follow
the on-screen instructions to register the handset to the base unit.
If you cancel this dialog, you can display it again by tapping [Landline] in the home
screen or app list, and then tapping [Landline settings] a [Initial settings].
4
For assistance, please visit http://www.panasonic.com/help
Installation
PRXA10_IM_(en-en)_1122_ver.020.pdf 4 2013/11/22 14:50:51
For your safety
To prevent severe injury and loss of life/property, read this section carefully before
using the product to ensure proper and safe operation of your product.
WARNING
Power connection
R C
ompletely insert the AC adaptor/power plug into the power outlet. Failure to do
so may cause electric shock and/or excessive heat resulting in a fire.
R Regularly remove any dust, etc. from the AC adaptor/power plug by pulling it
from the power outlet, then wiping with a dry cloth. Accumulated dust may cause
an insulation defect from moisture, etc. resulting in a fire.
R Unplug the product from power outlets if it emits smoke, an abnormal smell, or
makes an unusual noise. These conditions can cause fire or electric shock.
Confirm that smoke has stopped emitting and contact us at www.panasonic.com/
contactinfo
Installation
R T
his product is not water-resistant. To prevent the risk of fire or electrical shock,
do not expose the product to rain or any type of moisture.
R Do not place or use this product near automatically controlled devices such as
automatic doors and fire alarms. Radio waves emitted from this product may
cause such devices to malfunction resulting in an accident.
R Keep all accessories, including the microSD card, out of the reach of children to
prevent swallowing.
Operating safeguards
R T
o prevent possible hearing damage, do not listen at high volume levels for long
periods.
CAUTION
Installation and location
R T
he AC adaptor is used as the main disconnect device. Ensure that the AC
outlet is installed near the product and is easily accessible.
For assistance, please visit http://www.panasonic.com/help
5
Installation
PRXA10_IM_(en-en)_1122_ver.020.pdf 5 2013/11/22 14:50:51
Loading...