Panasonic 96NKX NT680 Users Manual
Quick Reference Guide
IP Proprietary Telephone
Model No. KX-NT630/KX-NT680
Thank you for purchasing an IP Proprietary Telephone (IP-PT). Please read this
manual carefully before using this product and save
more details, please refer to the manuals of the PBX.
Manuals and supporting information are provided on the Panasonic Web site at:
https://panasonic.net/cns/pcc/support/pbx/
this manual for future use. For
Note
R In this manual, the suffix of each model number (e.g., KX-NT630NE) is omitted
unless necessary.
R The illustrations may differ from the appearance of the actual product.
Open Source Software Notice
Parts of this product use open source software. For details about the open source
software, refer to the following Web site at:
https://panasonic.net/cns/pcc/support/pbx/
Trademarks
R The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and
any use of such marks by Panasonic Corporation is under licence.
R All other trademarks identified herein are the property of their respective owners.
Important Information
For Users in the United States
• This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may
cause undesired operation.
WHEN PROGRAMMING EMERGENCY NUMBERS AND/OR MAKING
TEST CALLS TO EMERGENCY NUMBERS:
Remain on the line and briefly explain to the dispatcher the
reason for the call before hanging up.
Perform such activities during off-peak hours, such as early
morning or late evening.
CAUTION
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
this product.
2
Important Information
FCC RF Exposure Warning:
• This product complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
• To comply with FCC RF exposure requirements, this product must be
installed and operated 20 cm (8 inches) or more between the product and all
person’s body.
• This product may not be collocated or operated in conjunction with any other
antenna or transmitter.
FCC ID can be found on the bottom of the units.
Privacy of communications may not be ensured when using this phone.
Hearing Aid Compatibility
This telephone provides magnetic coupling for hearing aids as defined by the
FCC in 47 CFR Section 68.316. Use only handsets or other acoustic devices
with this equipment that are compliant with the hearing aid compatibility
requirements of FCC Part 68.
When you hold the phone to your ear, noise might be heard in your Hearing
Aid. Some Hearing Aids are not adequately shielded from external RF (radio
frequency) energy. If noise occurs, use an optional headset accessory or the
speakerphone option (if applicable) when using this phone. Consult your
audiologist or Hearing Aid manufacturer about the availability of Hearing
Aids which provide adequate shielding to RF energy commonly emitted by
digital devices.
Compliance with TIA-1083 standard:
Compatible with
Hearing Aid T-Coil
TIA-1083
3
Telephone handsets identified with this logo have reduced
noise and interference when used with T-Coil equipped
hearing aids and cochlear implants.
T
Responsible Party
Panasonic Corporation of North America
Two Riverfront Plaza, Newark, New Jersey 07102-5490
Technical Support
Panasonic Corporation of North America
Two Riverfront Plaza, Newark, New Jersey 07102-5490
Telephone: 1 (800) 528-6747 Option 1
Important Information
For Users in Canada
Industry Canada Notices and Other Information
This product meets the applicable Innovation, Science and
Economic Development Canada technical specifications.
Notice
• This device complies with Industry Canada licence-exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may
cause undesired operation of the device.
• This Class B digital apparatus complies with Canadian ICES-003.
CAUTION
• Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
this product.
Compliance with TIA-1083 standard:
Compatible with
Hearing Aid T-Coil
Telephone handsets identified with this logo have reduced
noise and interference when used with T-Coil equipped
hearing aids and cochlear implants.
T
TIA-1083
RF Exposure Warning:
• This product complies with IC radiation exposure limits set forth for
an uncontrolled environment.
• To comply with IC RF exposure requirements, this product must be
installed and operated 20 cm (8 inches) or more between the
product and all person’s body.
• This product may not be collocated or operated in conjunction with
any other antenna or transmitter.
Privacy of communications may not be ensured when using this phone.
4
Accessory Information
Accessory Information
Included Accessories
Handset (1) Handset Cord (1) Stand (1)
Note
R The illustrat
Optional Accessories
Model
KX-NT630NE/
KX-NT680NE
KX-NT630/
KX-NT680
KX-NT630C/
KX-NT680C
KX-NT630X/
KX-NT680X
KX-NT630UK/
KX-NT680UK
KX-NT630RU/
KX-NT680RU
KX-NT680MS KX-A424E (PNLV6508) KX-A435X
ions may differ from the appearance of the actual product.
*
AC adaptor
KX-A
KX-A42
KX-A4
KX-A4
KX-A424E (PNLV6508)/
KX-A424AG (PNLV6508)/
KX-A424BR (PNLV6508)/
KX-A424X (PNLV6508)/
KX-A424AL (PNLV6508)/
KX-A424TW (PNLV6508)
KX-A
KX-A424E (PNLV6508)
KX-A
1
424CE (PNLV6508) KX-A435NE
4 (PNLV6508) KX-A435
24 (PNLV6508) KX-A435
24CE (PNLV6508)/
424CE (PNLV6508)/
424CE (PNLV6508) KX-A435X
Wall Mount K
KX-A435X
KX-A435NE
it
5
Accessory Information
KX-NT680SX KX-A424SX (PNLV6508) KX-A435SX
*1 This unit complies with the IEEE 802.3af Power-over-Ethernet (PoE)
standard. If PoE is available on your network, this unit can receive
the necessary power from the network through the Ethernet cable. In
this case, no AC adaptor is needed.
To order an optional AC adaptor, please order using the
"KX-A424xx" model number.For details about which AC adaptor
model number you should order, consult your dealer.
6
KX-NT630
Location of Controls
Location of Controls
KX-NT630C
7
Loading...