Installation Guide
Wireless Motion Sensor
Model No. KX-HNS102
Thank you for purchasing a Panasonic product.
Please read this document before using the unit and save it for future
reference.
For assistance, visit our Web site: http://www.panasonic.com/help
for customers in the U.S.A. or Puerto Rico.
Installation
2.462 GHz with a peak transmission
po
For your safety
prevent severe injury and loss of life/
To
property, read this section carefully
before using the product to ensure
proper and safe operation of your
product.
WARNING
Installation
R Wh
en opening holes in walls for
installation or wiring, or when
securing the power cable, make
sure you do not damage existing
wiring and ductwork.
Operating safeguards
R Do
not disassemble the product.
R Never put metal objects inside the
product. If metal objects enter the
product, turn off the circuit breaker
and contact an authorized service
center.
R Do not place the product in a
microwave or on an electromagnetic
cooking appliance. There is a risk of
overheating, smoke, fire, and
rupturing.
Medical
R C
nsult the manufacturer of any
o
personal medical devices, such as
pacemakers or hearing aids, to
determine if they are adequately
shielded from external RF (radio
frequency) energy. DECT features
operate between 1.92 GHz and
1.93 GHz with a peak transmission
power of 115 mW. Wi-Fi features
operate between 2.412 GHz and
For assistance, please visit http://www.panasonic.com/help
2
wer of 100 mW.
R Do not use the product in health
care facilities if any regulations
posted in the area instruct you not to
do so. Hospitals or health care
facilities may be using equipment
that could be sensitive to external
RF energy.
CAUTION
Installation and location
o
not place credit cards or other
R D
objects sensitive to magnetic fields
near the magnet. The magnetic field
could cause the object to be come
unusable.
Battery
not mix old and new batteries.
R Do
R Do not open or mutilate the
batteries. Released electrolyte from
the batteries is corrosive and may
cause burns or injury to the eyes or
skin. The electrolyte is toxic and
may be harmful if swallowed.
R Exercise care when handling the
batteries. Do not allow conductive
materials such as rings, bracelets, or
keys to touch the batteries,
otherwise a short circuit may cause
the batteries and/or the conductive
material to overheat and cause
burns.
R Do not recharge, apply heat,
disassemble, or place in fire.
R Do not touch metal or other objects
to the battery terminals.
R If electrolyte leaks from the battery,
do not touch the electrolyte or allow
it to come into contact with the eyes.
Electrolyte that has leaked from a
battery can cause blindness if it
enters the eyes. If electrolyte enters
th
e eyes, do not rub the eyes. Flush
them with clean water immediately
and seek medical attention.
R Keep out of the reach of small
children. There is a risk of
swallowing. If the battery is
swallowed, seek medical attention
immediately.
R Remove the battery if it becomes
unusable. There is a risk of leakage,
overheating, and rupture. Do not
attempt to use a battery if it is
leaking.
R Do not intentionally pour water on
the battery or allow it to get wet.
There is a risk of fire and smoke. If
the battery becomes wet, remove it
immediately and contact an
authorized service center.
R Insert the terminals of the battery
correctly. There is a risk of
overheating, burns, and electrolyte
leakage if the battery is inserted
incorrectly.
Important safety
in
structions
When using your product, basic safety
precautions should always be followed
to reduce the risk of fire, electric shock,
and injury to persons, including the
following:
1. Do not use this product near water
for example, near a bathtub,
washbowl, kitchen sink, or laundry
tub, in a wet basement or near a
swimming pool.
SAVE THESE INSTRUCTIONS
Installation
For best performance
Base unit location/avoiding noise
e base unit and other compatible
Th
Panasonic units use radio waves to
communicate with each other.
Environment
ep the product away from
R Ke
electrical noise generating devices,
such as fluorescent lamps and
motors.
R The product should be kept free
from excessive smoke, dust, high
temperature, and vibration.
R The product should not be exposed
to direct sunlight.
R Do not place heavy objects on top of
the product.
R The product should be kept away
from heat sources such as heaters,
kitchen stoves, etc. It should not be
placed in rooms where the
temperature is less than 0 °C (32 °F)
or greater than 40 °C (104 °F).
Damp basements should also be
avoided.
Routine care
R Wi
pe the outer surface of the
product with a soft moist cloth.
R Do not use benzine, thinner, or any
abrasive powder.
For assistance, please visit http://www.panasonic.com/help
3