PackardBell easy lite Service Manual
Product: Packard Bell Easy Lite
NEC/ZDS Versa Lite
SYSTEM DISASSEMBLY INSTRUCTIONS
Before starting the disassembly take notice of the ESD warning below.
Warning! All the components in the computer can be damaged
by static electricity (E.S.D. - Electro Static Discharge).
Discharge yourself and any tool you use to ground
(e.g. computer chassis) before touching or removing
a component. Place removed components in antistatic bags.
Battery and Hard Disk Drive Removal
1- Turn over the unit, unlatch the battery by shifting the two clips (Picture below, Item A) and
remove it.
2- Instructions for removing the hard disk drive:
a- Remove the two screws (Picture below, Item B) of the hard disk cover.
Disassembly/re-assembly instructions Easy Lite / Versa Lite
Packard Bell NEC Europe, version 1.0, 18-05-99, Page 1 of 13, MS
b- Take off the hard disk drive (HDD) cover.
c- Lift the drive out and carefully disconnect the flatcable and take away the drive.
d- Disconnect the HDD flatcable from the mainboard by removing the caution label with a
pair of tweezers and carefully unlocking the cable.
Disassembly/re-assembly instructions Easy Lite / Versa Lite
Packard Bell NEC Europe, version 1.0, 18-05-99, Page 2 of 13, MS
Removing the Keyboard
1- Remove the two screws at the corner of the base (location shown in the picture).
2- Turn over the unit, open the LCD panel and remove the two hinge caps by shifting them
sidewards.
Disassembly/re-assembly instructions Easy Lite / Versa Lite
Packard Bell NEC Europe, version 1.0, 18-05-99, Page 3 of 13, MS
3- Lift the keyboard a little with a flatbed screwdriver and unlock the three spring latches
between the <Esc> and <F1> keys, the <F7> and <F8> keys, and the <Pause> and
<Page Up> keys.
1- Unlock the connector, free the keyboard cable and take away the keyboard.
Disassembly/re-assembly instructions Easy Lite / Versa Lite
Packard Bell NEC Europe, version 1.0, 18-05-99, Page 4 of 13, MS
Loading...