PAC UPAC-NIS2 User Manual

uPAC-NIS2

01-06-2009

J1850

Class 2

VPW

Class 2

J1850

1 0 0 0 1 1 1 0 11 1 1 0 0 1 0 0 1 1 0 1 1 0 0

1 1 1 0 1 0 0 0 0 11 0 1 1 0 1 1 1 0 0 1 1 0 0

Arbitration

EOD

CRC

1 0 0 0 1 1 1 0 11 1 1 0 0 1 0 0 1 1 0 1 1 0 0

1 1 1 0 1 0 0 0 0 11 0 1 1 0 1 1 1 0 0 1 1 0 0

Class 2

Class 2

J1850

iPod and Auxiliary Input
Interface with HD Radio Option for
Select Nissan/Infiniti Radios

The uPAC-NIS2 interface is a multi input media device compatible with select Nissan/Infiniti radios
that are Satellite Radio ready. The 2 inputs will support any of the following combinations:
iPod/Auxiliary, iPod/HD Radio (HD Radio tuner sold separately) or Auxiliary/HD Radio (HD Radio
tuner sold separately). The optional HD Radio tuner is part number uPAC-HDRT. The iPod input
can be used with full control from the radio or full control from the iPod. The uPAC-NIS2 also fully
retains factory installed Satellite Radio and Rear Seat Entertainment Systems.
Please visit www.pac-audio.com for a complete list of supported vehicles.

Configuring the uPAC-NIS2 (iPod and Auxiliary Input as devices):

All Dipswitches Off

2008 Armada/Pathfinder
2007-2008 G35
2007-2009 Maxima
2007-2008 Sentra
2007 QX56

Dipswitch 3 On (Down)

2007-2009 Altima
2005-2009 Rouge
2007-2009 Versa

Dipswitch 1 & 2 On (Down)

2007-2008 M35/45

The iPod cable should be connected to Device 1.
The Auxiliary Input cable should be connected to Device 2.
If both the 3.5mm cable and RCA connections are used make sure to only have one of
the 2 sources powered at a time.

Note: If the optional HD Radio Tuner is used, refer to the uPAC-HDRT’s connection manual for configuration
and operation instructions. The USB connection has no function at this time.

***Important Note*** The 2007 G35 Coupe requires the uPAC-NIS1 interface.

Connecting to the vehicle:

With the key off, plug the 20 pin and 12 pin harnesses provided with the uPAC-NIS2 into the radio.
Plug the original 20 pin and 12 pin (if available) into the receptacle connectors provided with the
uPAC-NIS2. Make sure all other connectors (if any) are reconnected to the factory radio. Plug the
24 pin micro-fit cable into the uPAC-NIS2.

Pacific Accessory Corporation - Santa Ana, CA 92705
[e-mail] • Voice: 866-931-8021 • Fax: [phone] • www.pac-audio.com

AUDIO

SCAN

PWR

VOL

PUSH

1

1

5

6

SEEKREV

CD

TUNEREV

RADIO

RADIO

DISP

LOAD

PRESET A•B•C

CD

RADIO

SEEK

TRACK

FILE

SCRL

AUDIO

PWR

PUSH

1

1

4

5

CLOCK

TUNE
FF•REW
FOLDER

MP3

Nissan Operation

01-06-2009

J1850

Class 2

VPW

Class 2

J1850

1 0 0 0 1 1 1 0 11 1 1 0 0 1 0 0 1 1 0 1 1 0 0

1 1 1 0 1 0 0 0 0 11 0 1 1 0 1 1 1 0 0 1 1 0 0

Arbitration

EOD

CRC

1 0 0 0 1 1 1 0 11 1 1 0 0 1 0 0 1 1 0 1 1 0 0

1 1 1 0 1 0 0 0 0 11 0 1 1 0 1 1 1 0 0 1 1 0 0

Class 2

Class 2

J1850

If you are installing the uPAC-NIS2 into any of the following vehicles, the SEEK and TUNE buttons will have to be

Important Conguration Process

configured in order for the interface to operate properly:

2007-2008 Sentra
2007-2008 Maxima

If you are installing the uPAC-NIS2 into any of the following vehicles, the SEEK button will have to be configured
in order for the interface to operate properly:

2007-2009 Versa

Configuring the SEEK button:
Press the RADIO button a few times until SAT is displayed on the screen. Immediately press the SCAN button until

SEEKREV is displayed. After six seconds the radio will time out and the SEEK button is now configured.

Configuring the TUNE button:
Press the RADIO button a few times until SAT is displayed on the screen. Immediately press the SCAN button until

TUNEREV is displayed. After six seconds the radio will time out and the TUNE button is now configured.

Selecting the Input:

Press the RADIO or AM/FM/SAT button a few times until SAT is displayed on the screen. Immediately
press the SEEK >> or SEEK button to scroll through the available sources. Once the
source you would like to select is displayed (IPOD or AUX), press the << TUNE or TUNE button to
select it.

Pacific Accessory Corporation - Santa Ana, CA 92705
[e-mail] • Voice: 866-931-8021 • Fax: [phone] • www.pac-audio.com

OR

SEEK

TRACK

FILE

CAT

SCRL

AUDIO

SCAN

POWER

SEEK

SCAN

RADIO

CLOCK

AUX

CATEGORYCHANNEL

MIX
RPT

CD

2

3

5

6

TUNE

AUDIO

AUX

DISP

DISP

LOAD

PRESET A•B•C

CD

RADIO

CLOCK

CLOCK

CATEGORYCHANNEL

TRIP

INFO

MIX
RPT

4

5

6

TUNE

DISP

Controlling the iPod:

CLOCK

TUNE
FF•REW
FOLDER

MP3

CLOCK

TUNE

FF•REW

MP3

PRESET A•B•C

CD

RADIO

CLOCK

TUNE
FF•REW
FOLDER

SCRL

AUDIO

SCAN

AUX

PWR

VOL

PUSH

6CD CHANGER

MP3

RPT

RDM

1

1

1

4

5

6

CLOCK

CATEGORYCHANNEL

TRIP

INFO

MIX
RPT

TUNE

DISP

01-06-2009

J1850

Class 2

VPW

Class 2

J1850

1 0 0 0 1 1 1 0 11 1 1 0 0 1 0 0 1 1 0 1 1 0 0

1 1 1 0 1 0 0 0 0 11 0 1 1 0 1 1 1 0 0 1 1 0 0

Arbitration

EOD

CRC

1 0 0 0 1 1 1 0 11 1 1 0 0 1 0 0 1 1 0 1 1 0 0

1 1 1 0 1 0 0 0 0 11 0 1 1 0 1 1 1 0 0 1 1 0 0

Class 2

Class 2

J1850

SEEK >> or SEEK advances 1 song in an album or playlist.
<<SEEK or SEEK moves back 1 song in an album or playlist.

Display options:

DISP selects what is to be displayed on the
radio (artist, song title or play counter).

Browsing:

<< TUNE or TUNE Enters Browse Menu and moves forward to
the next step when pressed again.

OR

OR

TUNE >> or TUNE Takes one step back in the Browse Menu

SCAN Exits the Browse Menu

LOAD

PRESET A•B•C

CD

RADIO

Example of Operation (iPod full control):

Press the SAT button
Press the SEEK button until IPOD is displayed.

DISP

SEEK

TRACK

FILE

CAT

SCRL

AUDIO

SCAN

IPOD

1

1

1

PUSH

PWR

VOL

4

5

6

6CD CHANGER

RPT

RDM

TUNE

FF•REW

AUX

FOLDER

CLOCK

MP3

Press the TUNE button to select it.
Press the TUNE button, the radio will display: PL:LIST
Press the SEEK button until AR:ARTIST is displayed.
Press the TUNE button to select it.
Use the SEEK or SEEK buttons to select an artist.
Press the TUNE button to choose that artist.
Use the SEEK and SEEK buttons to select an album by
the previously selected artist.
Press the TUNE button to choose that album.
Use the SEEK and SEEK buttons to select a track from
the previously selected album.
Press theTUNE button to choose the track to be played.
The track will begin to play and you can select the next or
previous track by using the SEEK or SEEK buttons
on the radio.

OR

DISCLAIMER: Under no circumstances shall the manufacturer or the distributors of the uPAC-NIS1 be held liable for consequential
damages sustained in connection with the uPAC-NIS1. The manufacture and it’s distributors will not, nor will they authorize any
representative or any other individual to assume obligation or liability in relation to the uPAC-NIS1 other than its replacement.

Pacific Accessory Corporation - Santa Ana, CA 92705
[e-mail] • Voice: 866-931-8021 • Fax: [phone] • www.pac-audio.com

OFF

RADIO

SEEK TRACK

OFF

RADIO

DISC

SEEK TRACK

VOL

PTY

CAT

DISP

RPT

SCAN

Inniti Operation

01-06-2009

J1850

Class 2

VPW

Class 2

J1850

1 0 0 0 1 1 1 0 11 1 1 0 0 1 0 0 1 1 0 1 1 0 0

1 1 1 0 1 0 0 0 0 11 0 1 1 0 1 1 1 0 0 1 1 0 0

Arbitration

EOD

CRC

1 0 0 0 1 1 1 0 11 1 1 0 0 1 0 0 1 1 0 1 1 0 0

1 1 1 0 1 0 0 0 0 11 0 1 1 0 1 1 1 0 0 1 1 0 0

Class 2

Class 2

J1850

Selecting the Input:

Press the RADIO or AM/FM/SAT button a few times until SAT is displayed on the screen. Immediately
turn the TUNE KNOB to scroll through the available sources. Once the source you would like to select is
displayed (IPOD or AUX), press the << SEEK button to select it.

Controlling the iPod:

Turning the TUNE KNOB clockwise advances 1 song in an album or playlist.
Turning the TUNE KNOB counter clockwise moves back 1 song in an album or playlist.

Browsing:

<< SEEK Enters Browse Menu and moves forward to
the next step when pressed again.

SEEK/Track >> Takes one step back in the Browse Menu

SCAN Exits the Browse Menu

NOTE: If there is no SCAN button you need to press and hold the SEEK/TRACK >> button to exit the Browse Menu.

Pacific Accessory Corporation - Santa Ana, CA 92705
[e-mail] • Voice: 866-931-8021 • Fax: [phone] • www.pac-audio.com

Example of Operation (iPod full control):

01-06-2009

J1850

Class 2

VPW

Class 2

J1850

1 0 0 0 1 1 1 0 11 1 1 0 0 1 0 0 1 1 0 1 1 0 0

1 1 1 0 1 0 0 0 0 11 0 1 1 0 1 1 1 0 0 1 1 0 0

Arbitration

EOD

CRC

1 0 0 0 1 1 1 0 11 1 1 0 0 1 0 0 1 1 0 1 1 0 0

1 1 1 0 1 0 0 0 0 11 0 1 1 0 1 1 1 0 0 1 1 0 0

Class 2

Class 2

J1850

Press the RADIO button until SAT is displayed
Turn the TUNE KNOB until IPOD is displayed.
Press the << SEEK button to select it.
Press the << SEEK button, the radio will display: PL:LIST
Turn the TUNE KNOB until AR:ARTIST is displayed.
Press the << SEEK button to select it.
Use the TUNE KNOB to select an artist.
Press the << SEEK button to choose that artist.
Use the TUNE KNOB to select an album by
the previously selected artist.
Press the << SEEK button to choose that album.
Use the TUNE KNOB buttons to select a track from
the previously selected album.
Press the<< SEEK button to choose the track to be played.
The track will begin to play and you can select the next or
previous track by using the TUNE KNOB on the radio.

STATUS

ZOOM OUT

ZOOM IN

1

PRESET

A•B•C

ENTER

DEST

MAP

BACK

ROUTE

2 3 4 5 6

CAT
RPT

VOICE

PHONE

INFO

SETTING

SEEK TRACK

DISC

OFF

RADIO

Pacific Accessory Corporation - Santa Ana, CA 92705
[e-mail] • Voice: 866-931-8021 • Fax: [phone] • www.pac-audio.com