Ozito LLT-3605 Instruction Manual

360° LINE
LASER LEVEL

20m Working Range

INSTRUCTION MANUAL

SPECIFICATIONS

Battery: 6V DC (4 x AA Battery)
Laser Power: Class 2, <1mW
Working Range: 20m
Laser Diode: 635nm (Vertical Line)
650nm (Horizontal Line)
Accuracy: ±0.4mm/m
Levelling Range: ±4

0

Weight: 0.27kg

LLT-3605

WHAT’S IN THE BOX

360° Line Laser Level

Tripod

Mounting Stand

4 x AA Batteries

IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:

Australia 1800 069 486
New Zealand 0508 069 486

3 YEAR REPLACEMENT WARRANTY

Your product is guaranteed for a period of 36 months from the
original date of purchase and is intended for DIY (Do It Yourself)

use only. If a product is defective it will be replaced in accordance
with the terms of this warranty. Lithium Ion batteries are covered
by a 12 month warranty. Warranty excludes consumable parts.

WARNING

The following actions will result in the warranty being void.

• If the tool has been operated on a supply voltage other
than that specified on the tool.

• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.

• Failure to perform maintenance as set out within the
instruction manual.

• If the tool is disassembled or tampered with in any way.

WARRANTY

TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.

OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.

The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.

Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.

Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.

ozito.com.au

0217

ONLINE MANUAL

Scan this QR Code with your
mobile device to take you to
the online manual.

KNOW YOUR PRODUCT SETUP & PREPARATION

1. INSTALLING BATTERIES

1 360° Horizontal Laser

2 Vertical Laser Window

3 Automatic Levelling Switch

4 On/Off &

Operating Mode Button

5 Auto Levelling Indicator Light

6 1/4” Tripod Mounting Plate

7 Spirit Level

8 Angle Adjusting Handle

9 Height Locking Knob

10 Tripod Legs

11 Leg Locking Levers

12 Tilt Locking Knob

13 Rotation Locking Knob

14 Height Adjustment Handle

360° LINE LASER LEVEL WITH TRIPOD

2

1

3

4

5

The 360° line laser level unit requires 4 x AA batteries to operate.

1 Remove the battery lid from

the base of the laser unit using
the tab.

3 Push the lid tab down until it

clicks into place to secure the
batteries.

2 Insert 4 x AA batteries in the

correct direction indicated
by the embossing inside the
battery compartment.

WARNING! BEFORE INSTALLING BATTERIES, ENSURE

THE UNIT IS SWITCHED OFF, INCLUDING AUTOMATIC
LEVELLING SWITCH, TO PREVENT THE LASER FROM
OPERATING.

6

12

13

14

8

7

9

10

11

2. USING THE TRIPOD 3. ADJUSTING THE TRIPOD

Attaching the Laser to the Tripod

The tripod allows you to set up the laser in a specic position and easily

make adjustments to the height, angle and tilt of the unit.

1 Open up the 3 legs of the

tripod to stabilise the platform.

2 Align the 1/4” mount

at the base of the
laser unit with the 1/4”
screw at the top of the
tripod.

3 Rotate the laser unit clockwise

to fasten the unit to the
mounting plate securely.

Note: Make sure the laser is

pointing perpendicular to
the angle adjusting handle.

a

b

4 To remove the laser unit

from the mounting plate,
rotate the unit anti­clockwise.

Rotating the Laser

1 Loosen the rotation locking

knob by rotating anti­clockwise. Adjust unit by using
the angle adjusting handle.

Note: Secure in place after

adjusting, by turning the
rotation locking knob
clockwise.

Adjusting the Height of the Laser

Adjusting the Angle of the Laser

Adjusting the Tilt of the Laser

a

b

a

b

1 Extend the 3 legs of the tripod

by unlocking the leg locking
levers and raising the legs.

Note: Ensure the locking levers

are locked once desired
height is achieved to
secure the tripod.

2 To raise the laser further, wind

the height locking knob anti­clockwise to loosen, then raise
the laser by winding the height
adjustment handle.

Note: Ensure the height locking

knob is secured after
adjusting, by rotating
clockwise.

1 Rotate the angle

adjusting handle anti­clockwise to allow the
handle to move.

2 Adjust unit to the desired

angle using the handle, then
secure in place by rotating the
handle clockwise.

1 Loosen the tilt locking knob by

rotating anti-clockwise. Then
adjust the tilt angle and secure
in place again.