Ozito LLT-3600U Original Instructions Manual
360° LINE
LASER LEVEL
10m Working Range
ORIGINAL INSTRUCTIONS
SPECIFICATIONS
Battery: 6V DC (4 x AA Battery)
Laser Power: Class 2, <1mW
Laser Width: 100 LUX, 3mm/5m
Approx Run Time: 15 Hours
Working Range: 10m
Accuracy: ±0.5mm/m
Levelling Time: ≤4s
Levelling Range: ≥4
0
LLT-3600U
WHAT’S IN THE BOX
360° Line Laser Level
1.5m Tripod
4 x AA Batteries
ozito-diy.co.uk
WARRANTY
OZITO UK Unit 9 Stadium Court, Wirral International Business Park, Plantation Road, Bromborough, Wirral, CH62 3QG
0816
All of our products undergo strict quality checks to ensure that they reach
you in perfect condition. In the unlikely event that your device develops a
fault, please contact our service department at the address shown on this
guarantee card. You can also contact us by telephone using the customer
service number shown. Please note the following terms under which
guarantee claims can be made:
1. These warranty terms regulate additional warranty services, which the
manufacturer mentioned below promises to buyers of its new products
in addition to their statutory guarantee claims are not affected by this
guarantee. Our guarantee is free of charge to you.
2. The warranty services only covers defects due to material or
manufacturing faults on a product which you have bought from the
manufacturer mentioned below are limited to either the rectication of said
defects on the product or the replacement of the product, whichever we
prefer.
Please note that our devices are not designed for use in commercial, trade
or professional applications. A guarantee contract will not be created if the
device has been used by commercial, trade or industrial business or has
been exposed to similar stresses during the guarantee period.
3. The following are not covered by our guarantee:
- Damage to the device caused by a failure to follow the assembly
instructions or due to incorrect installation, a failure to follow the operating
instructions (for example connecting it to an incorrect mains voltage or
current type) or a failure to follow the maintenance and safety instructions
or by exposing the device to abnormal environmental conditions or by lack
of care and maintenance.
- Damage to the device caused by abuse or incorrect use (for example
overloading the device or the use or unapproved tools or accessories),
ingress of foreign bodies into the device (such as sand, stones or dust,
transport damage), the use of force or damage caused by external forces
(for example by dropping it).
- Damage to the device or parts of the device caused by normal or natural
wear or tear or by normal use of the device.
4. Your Product is guaranteed for a period of 36 months from the original
date of purchase and is intended for DIY (Do It Yourself) use only. Lithium
Ion batteries and chargers are covered by a 12 month warranty. Warranty
excludes consumable parts. Guarantee claims should be submitted
before the end of the guarantee period within two weeks of the defect
being noticed. No guarantee claims will be accepted after the end of the
guarantee period. The original guarantee period remains applicable to the
device even if repairs are carried out or parts are replaced. In such cases,
the work performed or parts tted will not result in an extension of the
guarantee period, and no new guarantee will become active for the work
performed or parts tted. This also applies if an on-site service is used.
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST
RETURN THE PRODUCT TO THE PLACE OF PURCHASE WITH YOUR
REGISTER RECEIPT.
Please refer to the restrictions of this warranty concerning wearing parts,
consumables and missing parts as set out in the service information in
these operating instructions.
CUSTOMER SERVICE HELPLINE
GB: 0151 294 4488
IRL: 1850 882711
Ozito-diy.co.uk
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
KNOW YOUR PRODUCT SETUP & PREPARATION
1. INSTALLING BATTERIES
1 On/Off &
Operating Mode Button
2 Auto Levelling Indicator Light
3 Laser Window
4 Automatic Levelling Switch
5 1/4” Tripod Mounting Plate
6 Quick Release Lever
7 Angle Adjusting Handle
8 Height Locking Knob
9 Tripod Legs
10 Leg Locking Levers
11 Tilt Locking Knob
12 Rotation Locking Knob
13 Height Adjustment Handle
360° LINE LASER LEVEL WITH TRIPOD
1
3
4
2
5
11
12
13
6
7
8
9
10
The 360° line laser level unit requires 4 x AA batteries to operate.
1 Remove the battery lid from
the base of the laser unit using
the tab.
3 Push the lid tab down until it
clicks into place to secure the
batteries.
2 Insert 4 x AA batteries in the
correct direction indicated
by the embossing inside the
battery compartment.
WARNING! BEFORE INSTALLING BATTERIES, ENSURE
THE UNIT IS SWITCHED OFF, INCLUDING AUTOMATIC
LEVELLING SWITCH, TO PREVENT THE LASER FROM
OPERATING.
2. ATTACHING LASER TO TRIPOD 3. ADJUSTING THE TRIPOD
Adjusting the Height of the Laser
The tripod allows you to set up the laser in a specic position and easily
make adjustments to the height, angle and tilt of the unit.
1 Open up the 3 legs of the
tripod to stabilise the platform.
a
b
a
b
2 Remove the mounting
plate from the tripod
by lifting on the quick
release lever.
3 Align the 1/4” mount at the
base of the laser unit with the
1/4” screw at the top of the
tripod.
4 Rotate the laser unit
clockwise to fasten the
unit to the mounting
plate securely.
5 Attach mounting plate with
laser to tripod by lifting the
quick release lever, then
slotting mounting plate into
tripod opening. Release lever
to secure.
Note: Make sure the laser is
pointing perpendicular to
the angle adjusting handle.
7 To remove the laser unit from
the mounting plate, rotate the
unit anti-clockwise.
6 To remove the laser
unit from the tripod,
lift the quick release
lever at the top of
the tripod and then
raise the laser and
mounting plate from
the tripod.
1 Extend the 3 legs of the tripod
by unlocking the leg locking
levers and raising the legs.
Note: Ensure the locking levers
are locked once desired
height is achieved to
secure the tripod.
2 To raise the laser further, wind
the height locking knob anticlockwise to loosen, then raise
the laser by winding the height
adjustment handle.
Note: Ensure the height locking
knob is secured after
adjusting, by rotating
clockwise.
Loading...