Ozito JSW-4000 User Manual

JIGSAW

WHAT’S IN THE BOX

400W

INSTRUCTION MANUAL

SPECIFICATIONS

Input Power: 230-240V~50Hz
Motor: 400W
No Load Speed 500-2900spm
Stroke Depth: 18mm
Bevel: +/- 45°
Blade Fitment: Bayonet
Cutting Capacities: Timber 55mm
Mild Steel 6mm
Plastic 12mm
Weight: 2kg

ozito.com.au

Jigsaw

Blade

Dust Extraction Adaptor

Hex Key

JSW-4000

WARRANTY

IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:

Australia 1800 069 486
New Zealand 0508 069 486

TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.

The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.

Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.

Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.

3 YEAR REPLACEMENT WARRANTY

Your product is guaranteed for a period of 36 months from
the original date of purchase. If a product is defective it will

be replaced in accordance with the terms of this warranty.

Warranty excludes consumable parts, for example: saw blades,
dust extraction adaptor, carbon brushes.

WARNING

The following actions will result in the warranty being void.

• If the tool has been operated on a supply voltage other
than that specified on the tool.

• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.

• Failure to perform maintenance as set out within the
instruction manual.

• If the tool is disassembled or tampered with in any way.

OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.

0812

KNOW YOUR PRODUCT

SETUP & PREPARATION

JIGSAW

1. Guide Roller

2. Variable Speed Dial

3. Adjustable Shoe

4. On/Off Switch

5. Lock On Switch

6. Soft Grip Handle

7. Dust Extraction Adaptor

1. CHANGING THE BLADE

Ensure the tool is disconnected from the power supply before
performing any of the following operations.

1. Use hex key to loosen
two blade securing
bolts.

2. Remove the blade.

3. Insert the replacement
blade into the blade
holder with the teeth
facing forward.

ACCESSORIES

8. Blade

9. Dust Extraction Adaptor

10. Hex Key

ONLINE MANUAL

Scan this QR Code with your
mobile device to take you to
the online manual.

4. Tighten blade securing bolts.

6. Ensure the blade is within the groove of the guide roller.

5. Ensure the shoulder of
the blade sits right at
the bottom of the blade
holder.