Oursson BL0640G Instruction Manual
Blender BL0640G
Instruction manual
Congratulation on buying OURSSON Blender!
3
mea n t for repair of pr o ducts under the trademark OURSSON.
• When moved from a cool to a warm place and
vice versa unpack it before use and wait 1-2
hours without turning it on.
• In order to prevent electrical shock do not
immerse the entire product or the wires into
the water.
• Be particularly careful and cautious when
using the device near children.
• Do not touch any moving parts, as this may
cause injury.
• The power cord is specially made relatively
short in order to avoid the risk of injury.
• Do not allow the cord to hang over the sharp
edge of the table or touch hot surfaces.
• Do not connect this device to a grid which is
overloaded with other appliances: it can lead
to the fact that the device will not function
pr o p er l y.
• Do not install the device near gas and electric
stoves and ovens.
SAFETY INSTRUCTIONS
Danger symbol
A reminder to user about high voltage.
Warning symbol
A reminder to user about the necessity of operating exactly according to the instructions.
When using electrical appliances should take
the following precautions:
• Use the device according to the following
instructions manual.
• Install the device on a stable surface.
• Use only the tools, which are included in the
product set.
• To protect against risk of electrical shock do
not put the cord in water or other liquid. If
for some reason the water got into the unit,
contact an authorized service center (ASC)
OURSSON AG.
• For power supply, use a power grid with proper
characteristics.
• Do not use the device in areas where the air
can contain vapors of flammable substances.
• Never attempt to open the device by yourself – it could possibly be the reason of an
electrical shock can lead to product malfunction and will invalidate the manufacturer’s warranty. For repair and maintenance,
contact only authorized service centers
220-240 В
4
• Use only the tools, which are included in the
product set.
• When cleaning the appliance do not use
abrasives and organic cleaners (alcohol,
gasoline, etc.).
• When cleaning the device it is allowed to use a
small amount of neutral detergent.
• To avoid burns protect face and hands from
steam.
• Do not place the device on non-heat resistant
surfaces, such as linoleum, vinyl or paper
tablecloths. It may cause fire or damage these
surfaces.
• The device must not be installed into the
cabinet when operating.
• To avoid injuries or damage of the device,
do not hold hands or any other object near
blender’s blades when the device is working.
• Do not grind very hard ingredients to avoid
blunting of the blades.
• To avoid injuries, before installing the blades,
place the blender’s jar on a clean flat surface.
• Do not start cooking without making sure that
the lid is closed correctly and firmly.
• After use, make sure to disconnect the device
from the power grid.
• Keep the device from bumps, falls, vibration
and other mechanical influences.
• Make sure to disconnect the device from
the power grid before cleaning or changing
accessories.
• Do not use the device outdoors.
• This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge.
• They can only use the device under the
supervision of the person responsible for their
safety, or after instruction on the safe use of
the device. Do not allow children to play with
the product.
• Use the product for its intended purpose.
• This product is intended only for use in the
home.
• If the power cord is damaged, it must be
replaced by a specialist from the authorized
service center ( ASC ) OURSSON AG to avoid
danger.
• To avoid burns, do not touch the hot parts of
the device with bare hands for as long as they
are completely cooled.
5
RECOMMENDATIONS
• Please read the instruction manual before
using the device. Keep the manual after
reading for further use.
• All illustrations in this manual are schematic
representations of real objects, which may
differ from the actual images.
PRODUCT SET
Measuring cup ..............................................1 pc.
Lid .................................................................1 pc.
Blender’s jar ..................................................1 pc.
Chopper ........................................................1 pc.
Blades ...........................................................1 pc.
Coupling ......................................................1 pc.
Motor unit .....................................................1 pc.
Instruction manual .......................................1 pc.
Recipe book .................................................1 pc.
Warranty card ..............................................1 pc.
NOTE! Do not apply physical force to the
device, as this may damage the
device due to the user’s fault.
OPERATION
Before utilizing the device, thoroughly clean all
parts, which contact with food.
NOTE! The blades are very sharp,
be careful.
Before assembling, make sure that the device is
unplugged.
Maximum time of continues use of the
blender is 2 minutes, after that you need to
turn off the device for 3 minutes.
NOTE! Before turning on the device,
make sure that the rotary
switch is in
position.
6
2
3
4
5
6
7
8
9
1
ELEMENTS OF DESIGN
UTILIZING THE JAR
Measuring cup
Lid
Blender’s jar
Blades
Coupling
Motor unit
Rotary switch with buttons
• Smoothie
• Ice crushing
• Fast mix and easy cleaning
Power indicator
Chopper
1
2
3
4
59
6
7
8
1. Place the jar onto the motor unit.
2. Plug in the device.
3. Select the required speed, using the speed
button. Blender has a smooth speed regulator
(from high to low). The Mix/Grid process will
start automatically.
4. You may also turn on the blender by holding
the fast mix button
. In this case, the device
will be working at max speed all the time. The
speed won’t change even if you will change the
switch’s position. To turn off the device, release
the button.
5. To prepare smoothie press
button. To stop,
press the button again.
6. For ice crushing, press
button. To stop,
press it again.
7. To finish working with blender, turn the switch to
position. Unplug the device.
8. After that you can disassemble the device. You
can open the lid only when the jar is removed.
TIP! To get ice crumb, select the
maximum speed level, or hold
«P» button for a few seconds.
If the pieces are still big, repeat
the operation.
Loading...