Oster BLSTUS Instruction Manual

For product and consumer services questions contact:

Oster Consumer Service

Mainland China: 4008-622-268

www.oster.com.cn

© 2014 Sunbeam Products, Inc. doing business as Jarden Consumer Solutions. All

rights reserved. Distributed by Dongguan Huixun Electrical Products Co. Ltd.,

No. 30-32, Hu Jing Road, Hong Ye Industrial Estate, Tangxia Town, Dongguan,

Guangdong Province, PRC. 1-Year Limited Warranty - please see separate insert for

details. Sunbeam Products, Inc. and Dongguan Huixun Electrical Products Co. Ltd.

are subsidiaries of Jarden Corporation (NYSE: JAH).

版权所有。一年有限保修：详情请参阅另附保修卡。

有关产品及客户服务问题, 请联络:

Oster客户服务

国内专线: 4008-622-268

www.oster.com.cn

P.N. 9100180000561

BLSTUS-073_14ECM1

Printed in China 中国印刷 GCDS-OST34829-ZZ

Instruction Manual 用户手册

BLENDER

搅拌机

READ AND SAVE ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE

使用产品前先阅读此用户手册并妥善保管

MODELS/型号

BLSTUS

产品中有毒有害物质或元素的名称及含量

Part Name

部件名称

Toxic and hazardous substances and

elements 有毒有害物质或元素

铅

(Pb)

汞

(Hg)

镉

(Cd)

六价铬

(Cr(VI))

多溴
联苯

(PBB)

多溴二

苯醚

(PBDE)

Oil bearing (含油轴承)

X o o o o o

Plug pin（插头片）

X o o o o o

Rectifying tube (二极管)

X o o o o o

Motor (电机)

X o o o o o

○： 表示该有毒有害物质在该部件所有均质材料中的含量均在SJ/

T11363-2006 标准规定的限量要求以下。

×： 表示该有毒有害物质至少在该部件的某一均质材料中的含量超

出SJ/T11363-2006 标准规定的限量要求。

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should be
followed, including the following:

READ ALL INSTRUCTIONS BEFORE USE.

1. Check if the voltage indicated on the appliance corresponding
to the local mains voltage before you connect the appliance. For
Mainland China, standard electrical outlet is 220V~50Hz.

2. Unplug cord from outlet when not in use or before cleaning.

3. To protect against risk of electrical shock, do not immerse the
cord, plug or motor base in water or other liquids.

4. DO NOT let cord hang over edge of table or counter or touch hot
surfaces.

5. Never leave appliance unattended when in use.

6. Avoid contact with moving parts. Keep hands and utensils out
of jar while blending to prevent personal injury or damage to the
blender. A rubber spatula may be used only when the blender is
not running.

7. The blade is sharp. Handle with care. Care shall be taken when
handling the sharp cutting blades, emptying the bowl and during
cleaning. Warning: Potential injury from misuse.

1). Switch off the appliance and disconnect from supply before

changing accessories or approaching parts that move in use.

2). Refer to the cleaning part for the instructions about how to

clean surfaces in contact with food.

8. Always put the lid on the jar before operating the blender, and
rest hand on the jar lid when starting and running motor.

9. DO NOT use this appliance to blend non-food items. Do not use to
blend hard food like bones, otherwise, the blades could be damaged.

10. This jar and bottom cap must be used with the provided motor

base, and could not be replaced by any other components not
recommended by the manufacturer.

11. DO NOT operate any appliance with a damaged cord or plug

or after the appliance malfunctions or is dropped or damaged
in any manner. Return the appliance to the nearest Authorised
Appliance Service Centre for examination, repair or electrical or
mechanical adjustment.

SAVE THESE INSTRUCTIONS

2

3

12. DO NOT use outdoors or for commercial purposes; this
appliance is for household use only.

13. Use this appliance for its intended use as described in this manual.

14. To reduce the risk of injury, never place cutter-assembly blades
on base without jar properly attached.

15. Always operate on a flat surface.

16. Always disconnect the blender from the supply if it is left
unattended and before assembling, disassembling or cleaning.

17. The use of attachments, not made by manufacturer, including canning
or ordinary jar and processing assembly parts, is not recommended by
the manufacturer, and may cause risk of injury to persons.

18. DO NOT operate blender continuously for more than 3 minutes.

19. This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance
by a person responsible for their safety. Children should be
supervised to ensure that they do not play with the appliance.

20. This appliance shall not be used by children. Keep the
appliance and its cord out of reach of children.

21. This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.

22. Do not put very cold liquids or ice into a blender jar that has
come directly after making a hot recipe.

23. This product is not intended for blending hot liquids. Do NOT
add ingredients with over 60°C .

THIS PRODUCT IS FOR HOUSEHOLD USE ONLY.

The maximum rating marked on the product is based on the
attachment that draws the greatest load. Other attachments may
draw less power.

TIGHTENING THE JAR

A. To tighten jar bottom, put assembled jar

securely into motor base ring with handle
in front of the right stop.

B. Using the jar handle, turn jar to the left as

far as possible. This insures that the jar
bottom is tightened properly. Remove jar
from motor base and mount.

C. To operate Blender, place assembled jar

in motor base ring. Seat jar firmly and
operate.

D. To remove jar, lift straight up. (If it is not

easily removed, rock gently and lift up, do
not twist). If jar bottom cannot be loosened

by hand, place assembled jar into motor
base ring with handle in front of left side
stop. Using handle, turn jar to right until jar
bottom loosens.

Do not attempt to place the jar on or
attempt to remove it from the motor base
while the motor is running.

ALWAYS HOLD JAR WITH ONE
HAND WHILE PROCESSING!

ASSEMBLING YOUR BLENDER

CAUTION: Follow these important steps to assemble, tighten and mount glass jar quickly and

correctly. INJURY MAY RESULT IF MOVING BLADES ARE EXPOSED.

1. Turn jar upside down so the small opening

is at the top.

2. Place Threaded Bottom Cap on Jar and
turn it clockwise to tighten.

3. Place Jar assembly onto base.

1.

2.

3.

A B

C D

Right
Stop

Left
Stop

MotoR

BaSe

NOTE: Oster blender comes with a thermal resettable fuse to
prevent the motor from damaging. In the case of an extreme
overload, the appliance shuts off. Turn the control knob to
“ 0” and unplug it. Let it cool for at least 90 minutes before
continuing.

POWER CORD INSTRUCTIONS

Please follow the instructions below to ensure the safe use of the power cord.

• DO NOT use an extension cord with this product.

• DO NOT pull, twist or otherwise abuse the power cord.

• Ifthesupplycordisdamaged,itmustbereplacedbythemanufacturer,itsserviceagentor

similarly qualified persons in order to avoid a hazard. Please call the Consumer Service number
as listed at the back of this user manual.

KNOWING YOUR OSTER®

BLENDER

Cover

The cover for your OSTER® Blender consists of two
parts, the flip tab (1) and the cover (2). The cover is
self-sealing and is resistant to absorption of odors and
stains. The flip tab gives convenience for easy pouring
and opening.

Glass Jar

The glass jar (3) for the Blender is graduated for
easy measurement and is molded with heat and cold
resistant material. The handle and special lid design
gives easy removal of liquid mixtures.

Threaded Bottom Cap

Threaded Bottom Cap (4) with Ice Crush Blade
pulverizes ice for smooth frozen drinks.

Motor and Motor Base

The powerful 2-speed motor is the heart of the
appliance and is a dedicated design for Oster blender.
It is completely enclosed within the housing (5).
The motor uses a “free-floating” feature to reduce
noise and wear. This allows the square post which
protrudes from the motor base to move slightly
from side to side. To prevent the motor from being
overloaded, read this instruction manual carefully and
follow the instructions.

Speed Control

This blender has 2 speed settings: Low (I)-High (II).
Operate (6) at High on toughest ingredients and
achieve the finest result.

NOTE: DO NOT operate blender at any setting
continuously for more than 3 minutes.

1

3

5

2

4

6

4

5