Orion UniBeam ORLASER6 User Manual

User Manual

ORION UniBeam (Red) [ORLASER6]

Warnings

 For indoor use only.
 Use with a grounded mains power supply.
 Locate on a flat surface away from moisture and vibration.
 Caustic chemicals or liquids can cause damage to the housing.
 Operating temperature: < 40°C
 Continuous use for more than 4 hours may shorten the product’s lifespan.
 Use cleaning tissue to remove dust on the lenses to optimize light output.
 Do not remove or break the warranty label.
 Do not disassemble the fixture yourself. Please consult a qualified technician for

service and repair.

LASER RADIATION AVOID EXPOSURE

TO BEAM CLASS 3B LASER PRODUCT

CAUTION

Fuse Replacement:

Disconnect the unit from the mains power supply. Unscrew the fuse holder with a

flat head screwdriver. Remove the old fuse and replace it with the same type of fuse.

CAUTION: Always replace with the correct type of fuse – anything other than the

specified fuse can cause fire or electric shock, damage your unit, and void your warra nty.

Specifications

Power voltage: AC220 V/ 50 HZ
Power: 20W.
Laser Wavelength: 650nm, Red Laser Power: 80mw
Stepper motor, X/Y scanning
More than 60 graphics and 200 effects
Operating modes: Sound Active, Auto.
Net weight: 3 KG
Size: 237mm x 176mm x 162 mm

Operation

Sound Active Mode

 Switch to Sound Active mode and turn the unit on.
 Turn the sensitivity knob clockwise direction to increase the fixture’s response to

sound.

 The laser will automatically turn off 7 seconds after the music stops.

AUTO Mode

 Switch to AUTO mode and turn the unit on.
 The built-in programs will automatically cycle without external control. AUTO

mode has no laser OFF function.

Front panel:

1. Sound Active microphone

2. Aperture

3. Power indicator: red

1 2 3