![](/html/82/827c/827ca0cdf76677285aeb9631a9f0a106e7f34ab3bafb7a337c27891bd1633af6/bg1.png)
Vibrating Alarm Clock
VAC500
Keep this user guide for future reference. Always retain your
proof of purchase in case of warranty service and register
your product on line at: AUSTRALIA: www.oricom.com.au
![](/html/82/827c/827ca0cdf76677285aeb9631a9f0a106e7f34ab3bafb7a337c27891bd1633af6/bg2.png)
2
Table of contents
Getting Started ......................................................................... 3
Feature Identications ..............................................................4
Operation .................................................................................. 5
Specications ........................................................................... 7
Customer Support ..................................................................... 8
Warranty ................................................................................... 9
Need Help?
If you need assistance setting up or using your Oricom product now or in the
future, call Oricom Support.
Australia 1300 889 785
www.oricom.com.au
Mon-Fri 8am – 6pm AEST
New Zealand 0800 67 42 66
www.oricom.co.nz
Mon-Fri 10am – 8pm NZST
Thank you for selecting the Oricom VAC500, vibrating alarm clock. The
VAC500’s powerful sound and vibration is designed to wake-up even the
heaviest sleeper.
![](/html/82/827c/827ca0cdf76677285aeb9631a9f0a106e7f34ab3bafb7a337c27891bd1633af6/bg3.png)
3
Getting Started
VAC500 Vibrating alarm clock
Pillow clip
Adaptor
Package Content
Battery installation
Install three AA alkaline batteries (not included).
Please observe correct battery polarity while installing.
A set of brand new alkaline batteries will last about six to eight months of
normal usage.
Please replace batteries if you notice the shaker is weak or if the backlight is dim.
Battery Safety and Disposal
Please do not dispose of used batteries in the household rubbish.
Please check your local government regulations for proper disposal.
![](/html/82/827c/827ca0cdf76677285aeb9631a9f0a106e7f34ab3bafb7a337c27891bd1633af6/bg4.png)
4
Feature Identications
1. Built-in ashlight
2. Alarm mode switch (audio + shaker, shaker, audio, off)
3. MODE (alarm, timer, temperature)
4. SET to select setting choice
5. SNOOZE
6. UP
7. DN/TEST (down or test)
8. Audio alarm tone control (Hi-Med-Lo)
9. Audio alarm volume control (Hi-Med-Lo)
10. Battery Compartment (rear)
11. Power Jack
12. Back light ON/OFF switch