Oregon I600 User Manual
EN
1
CONTENTS
Introduction ............................................................... 2
Packaging contents .................................................. 2
Overview .................................................................... 3
Front view ...............................................................
3
Back view ............................................................... 3
USB communications hub ......................................
4
Outdoor thermo-hygro sensor ................................ 4
Getting Started .......................................................... 4
Set up remote sensor .............................................
4
Set up USB communications hub ..........................
5
Set up main unit .....................................................
6
Data Transmission ....................................................
6
To disable sleep mode on computer (Windows XP
or earlier version) ................................................... 6
To disable sleep mode on computer
(Windows Vista) ..................................................... 7
Screen Display .......................................................... 7
To change display modes .......................................
7
To view different warning messages ......................
7
Weather forecast ....................................................
7
Clock .......................................................................... 7
To manually set clock .............................................
7
Alarm ......................................................................... 8
To set alarm ...........................................................
8
To activate / deactivate alarm ................................
8
To silence alarm .....................................................
8
Backlight ................................................................... 8
Reset .......................................................................... 8
Specifications ...........................................................
8
Precautions ............................................................... 9
About Oregon Scientific ..........................................
9
EU-Declaration of Conformity ............................... 10
FCC Statement ........................................................ 10
Declaration of conformity .....................................
11
Global 5-Day Weather Adviser II
Model: I600
USER MANUAL
EN
2
INTRODUCTION
Thank you for selecting the Oregon Scientific™ Global
5-Day Weather Adviser II (I600).
The weather station is capable of connecting to a PC
computer using the USB connection. By installing the
PC software, world cities can be user-selectable.
The
software can also download and display the latest
weather data and time of the selected cities. Please
download the software from the following website:
http://10.1.6.110/Oregon.exe
For full details see software instructions.
PC system requirements
The minimum system requirements for use of the
software is:
• Operating system: Microsoft Windows 98 or above
• Processor: 300 MHz or higher CPU speed
• RAM: Min. 128Mb
• Hard disk free space: Min. 50Mb
• CD-ROM or DVD drive
NOTE The USB is only used for the uploading and
downloading of weather data. It is not to be used for
charging battery power.
NOTE Please keep this manual handy as you use
your new product. It contains practical step-by-step
instructions, as well as technical specifications and
warnings you should know about.
PACKAGING CONTENTS
1 x USB Cable
1 x Remote
Sensor
1 x USB
Communications
Hub
3 x AA
UM-3 1.5V
Batteries
2 x AAA
UM-4 1.5V
Batteries
1 x Main Unit
EN
3
OVERVIEW
FRONT VIEW
1 2 3 4 5
6
7
8
9
10
11
12
13
1. : Information signal reception indicator
2. : Indicate AM / PM
3. : Indicate daily alarm is On
4. : Indicate alarm time is displayed
5. : Main unit batteries low
6. City name / Clock / Calendar / Scrolling warning
message
7. Today’s weather forecast (home environment)
8. Today’s regional weather forecast (user selected city)
9. : Indicate outdoor sensor reception status
10. : Sensor batteries low
11. Current indoor / outdoor temperature / humidity
(home environment)
12. Today’s regional HI / LO temperature (user selected city)
13. Next 4 day regional weather forecast with HI / LO
temperature (user selected city)
BACK VIEW
1
2
3
4
5
7
6
8
1. SNOOZE · MESSAGE: Activate snooze alarm; turn
on backlight; toggle between weather warning /
advisory / clock message
2. ALARM: Change settings / display; activate/deactivate
alarm; set alarm
3. MODE: Toggle between temperature and humidity
display; set clock
4. UP: Initiate sensor search; increase value of the setting;
enter Registration Mode; display next city’s data
5. DOWN: Decrease value of the setting; enter Registration
mode; display previous city’s data
6. Wall mount holes
7. RESET: Reset unit to default settings
8. ºC / ºF: Select temperature unit
EN
4
USB COMMUNICATIONS HUB
FRONT VIEW BACK VIEW
Front View:
1. LED status indicator: Blink during registration with main
unit or during sensor search; indicate a successful
USB connection
Back View:
1. SEARCH: Initiate search for remote sensors; initiate
registration with main unit
2. RESET: Reset USB Communications Hub to default
settings
3. USB port: Upload / download records to / from PC
OUTDOOR THERMO-HYGRO SENSOR
FRONT VIEW BACK VIEW
1
1
3
2
Front View:
1. LED status indicator: Blink when transmitting a reading
Back View:
1. RESET: Reset unit to default settings
2. Channel switch
3. Battery compartment
GETTING STARTED
SET UP REMOTE SENSOR
1. Slide open the battery door.
2. Select channel.
3. Insert the batteries, matching the polarities (+ / -)
and press RESET.
4. Close the battery door.
Loading...