WUXGA PROFESSIONAL INSTALLATION
LASER PHOSPHOR PROJECTOR
ZU510T-W
5500 LUMENS WUXGA LASER PHOSPHOR PROJECTOR
4 corner correction for basic stacking
360° and portrait mode operation*
Light source life up to 30000 hrs, IP5X certified engine
IP5X
H/V lens shift and keystone
Maintenance free - no filters needed
Delivering superior color with DURACORE
laser technology
The ZU510T-W is a ProAV projector offering bright and
vivid image quality, advanced optical components,
and a low-weight, compact size. Combined with
DURACORE laser light source and IP5X-certified dust
resistance rating for its optical engine, it is reliable,
cost-efficient and low maintenance, with no need for
lamp and filter changes. It provides up to 30,000 hours
of light source operation and is perfect for boardroom,
higher education, houses of worship, and small
entertainment venue use.
The ZU510T-W’s 5500 lumens create vibrant, detailed
images, filling a significant need in the mid-range
ProAV category. Developed for maximum flexibility,
this solid state laser projector includes a fixed lens
with Horizontal and Vertical lens shift, offering a unique
1.2-2.13 throw ratio and a digital zoom ratio of 1.8x,
enabling it to cover a range of interchangeable lens
capabilities and eliminating the need to change lenses
or buy additional ones.
The ZU510T-W streamlines integration with two builtin 10W speakers and a variety of inputs, including
three HDMI ports, 2x built in MHL. This fixed install
projector is a reliable, flexible and cost-efficient option
for boardrooms, university auditoriums, museums and
other mid-sized venues.
PROFESSIONAL INSTALLATION LASER PROJECTOR
OPTICAL/TECHNICAL SPECIFICATIONS
Display Technology Single DMD, 0.67" WUXGA DMD, DC3
Color Wheel 4 Segment RYGB, (B60 Filter Diameter 67mm)
Native Resolution WUXGA (1920x1200)
Maximum Resolution WUXGA (1920x1200)
Brightness 5,500 center 5,300 ANSI Lumens
Contrast Ratio 300,000:1 (ExtremeBlack enabled)
1,800:1 Full on/Full Off
Displayable Colors Graphic 10 bits, 1073.4 Million colors
Light source life up to Up to 30,000 hours
360 Degree & Portrait Mode Yes
Projection Method Front, rear, ceiling mount, table top
Keystone Correction ±30° Vertical and Horizontal
Geometry 4 corner adjustment
Uniformity 85%
Aspect Ratio 16:10 (native), 16:9, 4:3, Auto
Throw Ratio 1.2 ~ 2.13
Projection Distance 1.3m / 4.3ft - 7.8m / 25.5ft
Image Size 27.9" ~ 301.8"
Lens Shift Horizontal 10%, Vertical +20%
Projection Lens 1.8x zoom
Audio 10W Stereo
Noise (Normal/Eco dB) 35dB Typical (480W) 29dB Eco (320W)
Remote Control IR and wired remote
Operating Room Temperature Operating: 41 ~ 104 °F
Power Supply AC input 90 – 264V, 50–60 Hz, with PFC input
Power Consumption 480W +/- 15% Max (Bright), 320W +/-15%
Max (ECO)
High Altitude Operating temperature 0 ft ~ 10000 ft at
5 ~ 40°C (41 ~ 104 °F)
Light source type* Laser Phosphor
DLP® Technology by Texas Instruments™
COMPATIBILITY SPECIFICATIONS
Computer Compatibility UXGA, SXGA, XGA, SVGA, VGA, WXGA,
WUXGA, Mac
Video Compatibility SDTV / HDTV
3D Compatibility
†
Full 3D 1920 x 1080p @24Hz
Vertical Scan Rate 24–85Hz
Horizontal Scan Rate 15.375–91.146KHz
User Controls LAN, RS232, IR individually
I/O Connection Ports Input:
2 x HDMI (HDMI 2 Support MHL)
1 x VGA (D-Sub 15pin) (Computer In)
1 x Microphone in 3.5mm
1x Audio in 3.5mm
Output:
1x VGA Out (Support VGA loops through to
monitor) (Monitor Out)
1 x Audio out 3.5mm
Control:
1 x RS232 (D-sub 9 pin) (PC Control)
1 x Wired in (3.5mm phone jack) (Remote In)
1 x 12V Trigger (3.5mm phone jack)
1 x USB type A (for WiFi dongle purpose)
1 x Mini USB (for LAN FW upgrade only)
1 x IR Receiver (On the Front side and
Top side) 1 x RJ45 (LAN)
Loop Through (Audio) Yes
PHYSICAL SPECIFICATIONS
Security Kensington® lock port
Weight 24.2 lb
Dimensions (W x H x D) 15.75" x 5" x 16"
(Without feet)
13
8
9
7
5
6
3
Input
1. HDMI (H DMI 2 Support M HL)
2. VGA (D - S ub 15pin) (C o mp u te r In)
3. Microph one in 3.5mm
4. Audio in 3 .5mm
16"
Power On
Geometric Correction
F1:Test pattern
Display Mode
Information
Input source selection
Volume Control -/+
* Buttons without description are not applicable to this model.
Output
5. VGA Ou t (Support VG A
loops through to mo n it o r )
6. Audio ou t 3.5mm
15.75"
Enter
Menu
Freeze
Format
VGA
2
4
5"
1
10
11
Control
7. RS2 32 (D-sub 9 pin) ( PC Control)
8. Wired in (3.5 mm phone jack) (Rem ote In)
9. 12V Trigger (3.5mm ph one jack)
10. USB type A (f or WiFi dongle purp ose)
11. Mini USB (for L AN FW upgra de only) (Servi ce)
12. RJ4 5 (LA N)
13. 3D Sync
Power Off
PIP/PBP Menu
F2:LAN Settings
AV Mute
Four Directional
Select Keys
Laser
F3:Color Matching
Re-Sync
Digital Z oom -/+
Remote ID / Remote all
HDMI1
HDMI2
HDMI3
3D
12
Warranty
5 year or 15,000 hour light source warranty (whichever comes rst), 3-year
Optoma Express advance exchange warranty on the projector.
In the Box (Standard Accessories)
ZU510T-W projector, AC power cord, VGA cable, remote control, batteries,
multilingual CD-ROM user’s manual, basic user manual, warranty card, USB to
Micro USB cable
Optional Accessories
Universal ceiling mount, Optoma screen, wireless HDMI system, HDCast PRO BLACK.
Accessory Part Numbers
Universal ceiling mount: BM-9004U. Wireless HDMI system: WHD200,
HDCast PRO - BLACK, Remote: BR-3075W
UPC 796435 44 030 5
*Light source life is dependent upon many factors, including brightness mode, display mode, usage,
environmental conditions and more. Light source brightness can decrease over time
*Watching 3D projection while wearing 3D glasses for an extended period of time may cause a
headache or fatigue. If you experience a headache, fatigue or dizziness, stop viewing the 3D
projection and rest.
*Portrait orientation must follow the recommened positions, for further information please consult
with the User Manual.
www.OptomaUSA.com
Copyright © 2016 Optoma Technology, Inc. DLP® and the DLP logo are registered trademarks
of Texas Instruments™. All other trademarks are the property of their respective owners.
All specifications subject to change at any time.