Optoma NU FORCE MCA30 User Manual

MCA30
MCA30
User Manual 02
FCC Statement
Safety Precautions
Observe the following Safety Precautions when operating the device.
• Only use the accessories that are included in the package.
• Do not expose the device to direct sunlight.
• Do not place the device in a damp condition or high humidity.
• Do not cover or block any ventilation openings of the device.
• Do not drop the device or subject it to severe impact.
• Do not operate the device during thunderstorms.
• Protect all cables and power cord from being walked on or pinched.
• Keep the device away from water.
• Unplug the power cord before cleaning. Wipe the device with a clean, dry cloth.
• Do not attempt to repair this device yourself.
• For proper ventilation, make sure there is at least 10cm clearance at the back of the unit.
This device has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protec-
tion against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio commu-
nications. However, there is no guarantee that interference will not occur in a particular installa-
tion. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Package Contents
MCA30
User Manual 03
Features • Nuforce state of the art class D power amplifier operation for superior engineering
• Resonant LLC power supply for high efficiency and low EMI
• BTL mode allows more power for main channels
• High-Rigidity and Anti-Resonant aircraft-grade aluminum chassis for high strength and durability
• 120/230 AC switch for convenient use in areas with different line voltages
• High-Current Output
• DC Servo and output short protection circuits
• Thermal and over current Protection
Product Overview
INPUTS
OUTPUTS
220V 110V
BACK
Power button
Input
RCA x 8
Output
5 Way Binding Post x 8
Power Outlet
STEREO/BTL Mode Switch
Voltage Switch
FRONT
• Quick start guide • Safety booklet
Loading...
+ 5 hidden pages