BE6
Bluetooth in-ear headphone
User manual
2
Contents
WHAT’S IN THE BOX
BE6 EARPHONES
THE BASICS
Charging Your BE6
Checking Battery Level
Bluetooth Pairing
Power On/ Power Off
Wearing Your BE6
Handling Phone Calls
Listening to Music
Pairing with a Laptop
Pairing with a Mac
MISCELLANEOUS
Multipoint Connections
Restoring Factory Settings
Voice Prompts List
Disclaimer
FCC Interference Statement
Specification
3
WHAT’S IN THE BOX
BE6 earphones (with inline
controller and microphone)
Silicon tips (Silicon 4 pairs in
L/M/S/XS)
Comply tips (two pairs in L/M)*
Stabilizers (1 pair)
Cable loop for adjusting the length
of cable
Carry Case
Charging Cable (Micro-USB)
Quick Start Guide
Safety Instruction
*You are able to purchase replacement ComplyTM Foam tips through
www.complyfoam.com .
4
BE6 EARPHONES
1. Volume Up Button
2. LED Indicator
3. Power/Function Button
4. Charging port
5. Volume Down Button
6. Microphone
5
The BASICS
Charging Your BE6
Although your BE6 in-ear headphones come with a partially charged
battery, it is recommended that you fully charge your BE6 before first
use.
1. Open the charge port cover on the controller.
2. The charge cable should be connected to the charge port and
either to a PC or a dedicated USB charger.
3. When charging, the LED indicator is red.
4. LED Indicator turns off once charging is complete.
NOTE: It takes up to 2.5 hours to fully charge the BE6.
1
2
3
4
6
Checking Battery Level
You can check the battery level of your BE6 with the LED indicator *
To check battery level:
1. Press the Power/Function, volume up, and volume down buttons
simultaneously.
2. The LED indicator will flash red and blue simultaneously. The
battery level will be indicated by the number of flashes, as
described in the table below:
Number of Flashes Battery Level
Number of flashes
Voice prompts(enable)
2
Battery Low
3
Battery at 50%
4
Battery at 90%
5
Full Battery
NOTE: When the battery level is low, you will hear a beep or a “Battery
Low” voice prompt from your BE6 every 2 minutes when the estimated
battery reserve remaining time is under 15minutes.
IN ADDITION:
1. When the Voice prompts are switched off you will hear a beeping
sound (A short double tone) every two minutes.
2. Users with iOS devices and some Android models will be able to
view the battery status on their device’s display
*On some Android and all Windows operated devices you cannot check
the battery level for your BE6 when you listen to music, in the middle of a
phone call or in pairing mode.
Loading...