Optoma HDBV3090, HDBV3080, HDBV3100 Brochure

Getting Started Guide

HDBV3100, HDBV3090, HDBV3080

Table of Contents

Getting Started Guide

HDBV3100, HDBV3090, HDBV3080

Safeguards & Operation.……………..……...…………………....…

Introduction………………………………….....................................

Set-Up…………...........................................................................

Remote Control…………………………............................................

Basic Remote Operation.……………......….......................…….

Basic Picture Adjustments………………………............………..

Maintenance…………………...................................................…….

Troubleshooting…………………...................................................…

8-10

12-13

14-15

3-4

6-7

11

16

17

For more information, please visit our website at:

http://www.optomausa.com/bigvizion

Getting Started Guide 2

Getting Started Guide

HDBV3100, HDBV3090, HDBV3080

Safeguards & Operation

For your protection, please read these instructions completely, and keep this guide
available for future reference.

Carefully follow and comply with all cautions, warnings and instructions described in
this operating guide.

Always consult your installation professional for any operational servicing issues for
this product.

USE OF PRODUCT

POWER SOURCES

This product should only be operated with the type of power source
indicated on the serial/model plate on the system controller. If you
are not sure of the type of electrical power required, please consult
an installation professional.

OVERLOADING

Do not overload wall outlets and/or extension cords, beyond their
design as indicated by the manufacturer, or on the advice of a
professional installer.

CLEANING

Clean the bezel and the front screen of your BigVizion display with
a soft lint-free cloth. To remove finger prints and/or smudges, use a
mild soap and water mix, or an approved screen cleaning solvent.
Never use any ammonia-based products, since this can result in
damaging your screen.

VENTILATION

Always operate the system controller for BigVizion in a well venti­lated area, and follow the recommendations from your professional
installer. Never change the placement of your system controller,
without first consulting your installation professional.

For more information, please visit our website at:

http://www.optomausa.com/bigvizion

Getting Started Guide 3

Getting Started Guide

HDBV3100, HDBV3090, HDBV3080

SERVICING

Do not try to service any BigVizion components yourself. Always
consult your installation professional if any function of the BigVizion
is not operational.

INSTALLATION

If direct sunlight or any type of strong light is directed towards the
BigVizion, there will be a reduction in image quality from the display.
Make certain that strong light is not directed towards your BigVizion.

VIEWING

Picture performance may be affected by your viewing position.
Please follow the following minimum recommended viewing
distances for your BigVizion.
HDBV3100 (100”) : 14 Feet
HDBV3090 (90”) : 10 Feet
HDBV3080 (80”) : 8 Feet

If you are uncertain about viewing distance, consult your installation
professional.

PROJECTION LAMP

The BigVizion is based on DLP® technology by Texas Instruments,
and utilizes a projection lamp for the light source. If you notice the
picture quality diminishing after a long period of use, the projection
lamp may need to be replaced.

(Note: A lamp warning message will appear on your display after 3900 hours
recommending replacement within 100 hours.)

Please consult your installation professional a replacement lamp.

COOLING FAN

The BigVizion uses a system of cooling fans to prevent the build-up
of high temperatures. This may result in hearing noise from the fan in
a very quiet room. Please consult your installation professional with
any questions regarding fan placement.

REMOTE CONTROL DETECTION

Aim your remote control towards the bottom of the screen of your
BigVizion. The remote sensor is placed behind the screen for
detection.

For more information, please visit our website at:

http://www.optomausa.com/bigvizion

Getting Started Guide 4

Getting Started Guide

HDBV3100, HDBV3090, HDBV3080

Introduction

Thank you for purchasing the Optoma BigVizion 1080p in-wall display system.
This guide covers basic instructions for the following models: HDBV3100,
HDBV3090 and HDBV3080.

This guide will discuss the day-to-day, normal operation of your BigVizion.
It is recommended you keep this guide available for operational assistance.

A detailed installation manual has been provided to your installation professional.
This manual covers the installation, setup and advanced settings of the BigVizion.
Consult with your installer for any questions regarding the BigVizion and its
operation.

The BigVizion by Optoma is the first customizable and modular in-wall rear
projection display system. BigVizion is available in three sizes: 100-, 90- and
80-inch.

The BigVizion displays stunning images at native 1080p resolution with amazing
color, clarity and sharpness.

BigVizion is designed to be the center of your home entertainment system.
Optoma’s exclusive system controller is designed to be an all digital “set and forget”
system. Once the system is set-up by your installer, the digital controls of the
BigVizion will not require any additional adjustments.

After the installation is complete, you can control of the entire system through the
remote control.

The BigVizion System Consists of Three Components:

1) The Display Unit

2) System Controller Box

3) Remote Control

The Display Unit:

The BigVizion is a customizable modular system installed by a professional installer
to blend in with any home décor. With its in-wall design, the flush mounted display
of the BigVizion maximizes your room space.

For more information, please visit our website at:

http://www.optomausa.com/bigvizion

Getting Started Guide 5

Getting Started Guide

HDBV3100, HDBV3090, HDBV3080

BigVizion is one of the largest in-wall display systems to feature native 1080p
resolution.

The BigVizion also features exclusive ISFccc modes for custom calibration.

Note: ISF modes are locked at the factory. A professional calibrator is required to
set-up and calibrate the ISF function. ISF calibration is not required to use your
BigVizion; however, advanced calibration provides the best picture performance
from your product. An additional cost maybe associated with ISF calibration.

The System Controller Box:

The key component of the modular BigVizion display system is the system controller
developed by Optoma. This controller is a fully-featured, all digital, video processor
designed to create the best image for the BigVizion. The system controller provides
the best source for content switching, image de-interlacing, image scaling, and color
management, in one easy-to-use package.

Optoma developed the system controller to be the center of your home
entertainment center. All video content sources, such as a DVD player, cable box
and others, are easily routed through the system controller. These sources can be
accessed by the remote to control what is displayed on the screen.

The system controller can be installed into several different locations of your home
theater area – even behind the screen of the BigVizion. Work with your installer to
determine the best location.

Remote Control:

Operation of the BigVizion is managed by the remote control, such as:

- Powering the BigVizion system on/off

- Selecting the content to display on screen

- Changing the display from high-definition/widescreen 16:9 to standard definition
4:3 aspect ratios.

For the daily use of the remote control, only common functions are needed and are
described in this guide. For more intricate functions, consult the advanced user’s
guide supplied with your BigVizion.

For more information, please visit our website at:

http://www.optomausa.com/bigvizion

Getting Started Guide 6