HD86
Featuring our highest grade, hand selected Pure Optics and available in Standard, Long and Short throw options, all
with full lens shift, the HD86 provides pin sharp, crystal clear images in any room. An optional Anamorphic Projection
Kit provides a unique “fit and forget” fully automated solution for Constant Height projection.
ANSI Contrast
ANSI Contrast† is a way of measuring the true “real world” contrast
performance you can expect from a projector in your own home. This
measurement technique includes a reproducible procedure that can
be used to compare the performance of projectors using different
display technologies.
High ANSI Contrast Low ANSI Contrast
Don’t be misled by contrast ratio specs – a projector with a contrast
ratio specification of , for example, 50,000:1 may well have an ANSI
contrast ratio specification significantly lower than the H86. Contrast
ratio specifications are typically measured using a “Full On, Full
Off” technique. This involves measuring the projector performance
when displaying a pure black screen and then a pure white screen.
Many believe that “Full On, Full Off” contrast measurements may
not depict “real world” performance and may not offer the relevant
information needed to determine how a projector will look when you
are watching movies in your home. If you want to compare projector
contrast specifications look for the ANSI contrast specification.
With an ANSI contrast ratio significantly higher than many LCD
based projectors, the HD86 is the only choice for Home Cinema
purists that expect ultimate image fidelity in their home.
CMS Colour Control
Choose between 5 preset colour gamuts: HDTV (Rec 709), ITU 601,
DLP Cinema, SMPTE-C & Native then fine tune with primary point
co-ordinates controls
PureMotion2
The second generation of our Frame Interpolation technology
provides fluid natural movement free from judder or motion blurring
- improving the resolution and clarity of moving images
Dynamical Black
Second generation high performance iris for controlling the dynamic
contrast - enabling content dependant light modulation for high
impact viewing
Brightness control
Two lamp power settings and a 9 step manual iris gives unprecedented
control over the brightness output enabling it to be tailored for
any application
Optoma guarantees colour quality will
remain as new for 5 years*
For Home Cinema colour accuracy is critical. We are
so confident that, unlike competing technologies,
the HD86 colour will not change in use that we have
guaranteed it will stay the same as the day you
bought it, for at least 5 years.
The HD86 projector based on an all-digital DLP® chip delivers stunning
picture quality again and again. Unlike competing analogue technologies,
the semiconductor that makes DLP® projection possible is virtually
immune to environmental factors that can cause an image to degrade
over time.
HD86 Specifications Highlights
Full HD
ANSI Contrast
Audible Noise
Brightness
Throw Ratio
Inputs
Output
Video Compatibility
Dimensions
Weight
Warranty
EAN Number
For full specifications please visit the website at: www.themescene.tv
42 Caxton Way, Watford Business Park, Watford, Hertfordshire.
Native 1080P (1920 x1080)
700:1 ANSI
29dB Standard mode
1600 ANSI Lumens
Standard : 1.54 – 1.93 (1.25x Zoom)
Long: 1.93 – 2.9:1
Short: 0.77:1
Anamorphic lens option for fully
automated Constant Height Projection
3 x HDMI, Component, VGA (PC\SCART),
S-video, Composite
2 x 12V OUT (1 programmable)
1080P,1080i 720P, PAL, NTSC, SECAM
416x324x143mm
8 kg
Warranty may vary by country. Please see
or ask your local supplier for details
5060059043767
Optoma Europe Limited
WD18 8QZ
Tel: +44 (0) 1923 691800
Fax: +44 (0) 1923 691888
www.optoma.co.uk
*Optoma guarantees that in normal use, Optoma DLP® colour quality will be indistinguishable from when new. Please note that worn lamps will give slight variance. Exclusions: *(1) Guarantee is voided if the
projector is subject to damage through mis-use. (2) Guarantee may be void in industrial or commercial entertainment environments where dust or smoke is particularly excessive 3) Guarantee will not apply if
lamp brightness is below 50% due to wear or if the projector is not working due to other fault. † “ANSI Contrast” is a recognised contrast measurement technique as described in the standard IEC 61947-1
DLP®, and the DLP logo are registered trademarks of Texas Instruments. All other product names and company names used herein are for identifications purposes only and may be trademarks or registered
trademarks of their respective owners. All images have been simulated. Errors and omissions excepted, all specifications are subject to change without notice. Copyright © 2009, Optoma Europe Ltd.
V1.3 with DeepColor