Opto 22 G4DA4, G4DA5, G4DA6, G4DA7 Data Sheet
I/O MODULES
ANALOG DC OUTPUT
G4
DAT A SHEET
Form 424-010206
Description
G4 analog voltage output modules provide a single channel of transformer and
optically isolated digital to voltage conversion. The modules are available in unipolar
and bipolar versions and include complete electrical channel-to-channel isolation
which eliminates troublesome ground problems. Modules plug into an Opto 22
Modular controller or an analog I/O brick and are secured by a captive screw. Field
connections are made to the terminal strip located on the brick base or controller
I/O board.
page 1/2
Part
Numbers
G4DA4 0 To +5 VDC Output
G4DA5 0 To +10 VDC Output
G4DA6 -5 To +5 VDC Output
G4DA7 -10 To +10 VDC Output
Description
G4DA4 G4DA5 G4DA6 G4DA7
Output Voltage 0 to 5 VDC 0 to 10 VDC -5 to +5 VDC -10 to +10 VDC
Accuracy ±5 mV ±10 mV ±10 mV ±20 mV
I/O MODULES
ANALOG DC OUTPUT
G4
DAT A SHEET
Form 424-010206
Specifications
General Specifications
Maximum Output current 20 mA
Output response time Full scale step
Resolution 12 bits
Isolation (Transient)
Input-to-analog supply
Ambient temperature
change in 3 ms
4,000 Vrms
4,000 Vrms
0° to 70° C
-25° to 85° C
page 2/2
Connections
© 1991–2001 Opto 22. All rights reserved. All trademarks, trade names, logos, and service marks referenced herein belong to their respective companies.
Loading...