Opticon OPR 3201 Quick Guide

STD-3201

Introduction

• Read this quick start guide carefully before installing or/and using the stand.

• Keep this quick start guide for future reference and store in a safe place.

CAUTION

• This quick start guide may be revised or withdrawn at any time without prior notice.

• This quick start guide may not, in whole or in part, be copied, photocopied, reproduced, translated or
converted to any electronic or machine readable form without prior written consent of Opticon.

• Trademarks used are property of their respective owners.

• Under no circumstances shall Opticon be held responsible for any special, incidental, consequential or
indirect damages howsoever caused.

Handling Instructions

• The STD-3201 is the designated stand for the OPR-3201 handheld laser scanner.

• Do not dismantle the stand.

• Do not drop the stand.

• Do not install the stand on unstable surfaces.

• Do not place heavy objects on top of the stand.

• Do not expose the scanner to intense heat.

• Do not hold the Scanner Cradle when adjusting the Stand Arm.

Quick Start Guide

STEP

1

Use the Adjusting Screw to connect the
Stand Arm with the Scanner Cradle as
shown in the diagram.

STEP

2

Adjust the angle of the Scanner Cradle
by first loosening the Adjusting Screw
and then tightening it once the Scanner
Cradle has been placed in the desired
position.

Using the Stand

Stand Arm

Scanner
Cradle

Adjusting Screw

STEP 1

Adjusting Screw

Stand Base

STEP 2

Dimensions

Weight

Color

(H) 295 × (W) 106 × (D) 146 mm Max
(H) 11.6 × (W) 5.75 × (D) 4.17 in. Max

385g Max (13.58 oz / 0.85 lb)

Black or White

146mm 106mm

Copyright 2007, Opticon All ri ghts reserved.

Accessories & Optional PartsOverview

Please use commercially
available M3 or M4 screws
to mount the stand.

295mm

Note

Over-tightening the screws may cause
the stand to break.

STEP

3

Make sure to place one hand on the Stand
Base and hold the Stand Arm with the
other hand when adjusting the height and
the angle of the stand.

Note

Do not hold the Scanner Cradle when adjusting
the Stand Arm.

Please contact Opticon or your local dealer.

The Netherlands

U.S.A.

France

Germany

Italy

Spain

Opticon Sensors Europe B.V.

tel: [phone] / email: [e-mail]

Opticon Inc.

tel: [phone] / email: [e-mail]

Opticon S.A.S.

tel: [phone] / email: [e-mail]

Opticon Sensoren GmbH

tel: [phone] / email: [e-mail]

Opticon s.r.l.

tel: [phone] / email: [e-mail]

Opticon Sensores S.L.

tel: [phone] / email: [e-mail]

Contact

Sweden

United Kingdom

Taiwan

China

Australia

Brazil

STEP 3

Opticon Sensors Nordic AB

tel: [phone] / email: [e-mail]

Opticon Limited

tel: [phone] / email: [e-mail]

Opticon Far Eastern Ltd.

tel: [phone] / email: [e-mail]

Opticon Sensors Europe B.V., Shanghai Representative Oce

tel: [phone] / email: [e-mail]

Opticon Sensors Pty. Ltd.

tel: [phone] / email: [e-mail]

Opticon Sensors Europe B.V., Latin American Oce

tel: [phone] / email: [e-mail]

5J0081