Opticon OPN 2001 Specifications Manual
Data Collector—Single T ray
OPN 2001
The OPN 2001 is a compact and cordless laser
scanner that outputs all stored data through a USB
interface.
Specifications Manual
All information subject to change without notice.
Document History
Opticon
OPN 2001
Specifications Manual
Model Number:
Edition:
Date:
OPN 2001 USB
1A
2006-12-5
Specification Number:
Original Spec Number:
CS06164
CS06143
Copyright 2008 Opticon. All rights reserved.
This manual may not, in whole or in part, be copied, photocopied, reproduced, translated or converted to any electronic or
machine readable form without prior written consent of Opticon.
Limited Warranty and Disclaimers
PLEASE READ THIS MANUAL CAREFULLY BEFORE INSTALLING OR USING THE
PRODUCT.
Serial Number
A serial number appears on all Opticon products. This official registration number is directly related to the device
purchased. Do not remove the serial number from your Opticon device. Removing the serial number voids the warranty.
Warranty
Unless otherwise agreed in a written contract, all Opticon products are warranted against defects in materials and
workmanship for two years after purchase. Opticon will repair or, at its option, replace products that are defective in
materials or workmanship with proper use during the warranty period. Opticon is not liable for damages caused by
modifications made by a customer. In such cases, standard repair charges will apply. If a product is returned under
warranty and no defect is found, standard repair charges will apply. Opticon assumes no liability for any direct, indirect,
consequential or incidental damages arising out of use or inability to use both the hardware and software, even if Opticon
has been informed about the possibility of such damages.
Packaging
The packing materials are recyclable. We recommend that you save all packing material to use should you need to
transport your scanner or send it for service. Damage caused by improper packaging during shipment is not covered by
the warranty.
Trademarks
Trademarks used are the property of their respective owners.
Opticon Inc. and Opticon Sensors Europe B.V. are wholly owned subsidiaries of OPTOELECTRONICS Co., Ltd., 12-17,
Tsukagoshi 4-chome, Warabi-shi, Saitama, Japan 335-0002. TEL +81-(0) 48-446-1183; FAX +81-(0) 48-446-1184
SUPPORT
USA Europe
Phone: 800-636-0090
Email: support@opticonusa.com Email: support@opticon.com
Web: www.opticonusa.com Web: www.opticon.com
2
Opticon
OPN 2001
Specifications Manual
Contents
1. Abstract....................................................................................................................................... 6
2. Overview...................................................................................................................................... 6
3. Physical Features....................................................................................................................... 6
3.1. Dimensions ......................................................................................................................... 6
3.2. Weight ................................................................................................................................. 6
4. Environmental Specifications ...................................................................................................7
4.1. Operating Temperature and Humidity................................................................................. 7
4.2. Storage Temperature and Humidity .................................................................................... 7
4.3. Ambient Light Immunity....................................................................................................... 7
5. Controls....................................................................................................................................... 7
6. Electrical Specifications ............................................................................................................ 8
6.1. Absolute Maximum Ratings ................................................................................................ 8
6.2. Recommended Operating Conditions ................................................................................. 8
6.3. Electrical Characteristics..................................................................................................... 8
6.4. Main Battery ........................................................................................................................ 9
6.5. Battery Operating Time and Charging Time ....................................................................... 9
7. Optical Specifications................................................................................................................ 9
7.1. Laser Scan Specifications................................................................................................... 9
7.2. Laser Scanning Standards................................................................................................ 10
7.2.1. Laser Scanning Tilt ..................................................................................................................10
7.2.2. Scanning Curvature .................................................................................................................10
8. Technical Specifications.......................................................................................................... 11
8.1. Print Contrast Signal (PCS) .............................................................................................. 11
8.2. Minimum Resolution.......................................................................................................... 11
8.3. Scan Area and Resolution ................................................................................................ 12
8.3.1. Depth of Field...........................................................................................................................12
8.4. Pitch, Skew, and Tilt.......................................................................................................... 13
8.4.1. Pitch Angle ...............................................................................................................................13
8.4.2. Skew Angle and Dead Zone ....................................................................................................14
8.4.3. Tilt Angle ..................................................................................................................................14
8.5. Curvature .......................................................................................................................... 15
9. Interface Specifications ...........................................................................................................16
3
Opticon
OPN 2001
Specifications Manual
9.1. USB Interface Specifications............................................................................................. 16
9.1.1. Settings ....................................................................................................................................16
9.1.2. Interface Circuit ........................................................................................................................16
10. Cable and Connector ............................................................................................................... 16
10.1. USB Cable ........................................................................................................................ 16
10.2. Connector.......................................................................................................................... 16
11. Serial Number........................................................................................................................... 17
12. Packaging Specifications........................................................................................................18
12.1. Individual Packaging Specification .................................................................................... 18
12.2. Collective Packaging Specification ................................................................................... 19
13. Durability................................................................................................................................... 20
13.1. Static Electricity ................................................................................................................. 20
13.2. Shock Test (without packaging) ........................................................................................ 20
13.3. Shock Test (with individual packaging) ............................................................................. 20
13.4. Vibration (without packaging) ............................................................................................ 21
13.5. Vibration (with individual packaging) ................................................................................. 21
13.6. Dust and Drip Proof........................................................................................................... 21
14. Reliability................................................................................................................................... 21
15. Regulatory Compliance ...........................................................................................................21
15.1. Laser Safety ...................................................................................................................... 21
15.2. Product Safety................................................................................................................... 22
15.3. EMC .................................................................................................................................. 22
15.4. RoHS................................................................................................................................. 22
16. Safety......................................................................................................................................... 23
16.1. Shock ................................................................................................................................ 23
16.2. Temperature Conditions.................................................................................................... 23
16.3. Foreign Materials .............................................................................................................. 23
16.4. Other ................................................................................................................................. 23
17. Mechanical Drawing.................................................................................................................24
Table of Figures
Figure 1: Scanning curvature ..................................................................................................... 10
Figure 2: Depth of field and resolution........................................................................................ 12
Figure 3: Pitch ............................................................................................................................ 13
4
Opticon
OPN 2001
Specifications Manual
Figure 4: Skew and dead zone................................................................................................... 14
Figure 5: Tilt angle...................................................................................................................... 14
Figure 6: Curvature..................................................................................................................... 15
Figure 7: Interface circuit ............................................................................................................ 16
Figure 8: Mini USB B connector ................................................................................................. 16
Figure 9: Serial number label ..................................................................................................... 17
Figure 10: Individual packaging.................................................................................................. 18
Figure 11: Collective packaging.................................................................................................. 19
Figure 12: Shock (drop) test ....................................................................................................... 20
Figure 13: Mechanical drawing...................................................................................................24
5
Specifications Manual
1. Abstract
This manual provides specifications for the OPN 2001 compact data collector.
2. Overview
The OPN 2001 is a compact and cordless laser scanner that outputs all stored data through a
USB interface. It has a 150 mAh lithium-ion battery that is charged via the USB interface.
Scan width is 44 mm and scan angle is 44° at a minimum scan distance.
Supported symbologies:
Linear (1D) Postal 2D
JAN/UPC/EAN, incl. add-on Chinese Post Matrix 2of5 Composite Codes
Codabar/NW-7 Korean Postal Authority Code MicroPDF417
Code 11 PDF417
Code 39
Code 93
Code 128
GS1-128 (EAN-128)
GS1 Databar (RSS)
IATA
Industrial 2of5
Interleaved 2of5
ISBN-ISSN
Matrix 2of5
MSI/Plessey
S-Code
Telepen
Tri-Optic
UK/Plessey
Opticon
OPN 2001
3. Physical Features
3.1. Dimensions
W 32.0 x D 62.0 x H 16.0 mm
3.2. Weight
28 g max.
6
4. Environmental Specifications
4.1. Operating Temperature and Humidity
Temperature: 0 to 40° C
Humidity: 20 to 85%
4.2. Storage Temperature and Humidity
Temperature: -20 to 60° C
Humidity: 20 to 90%
4.3. Ambient Light Immunity
Decoding performance is guaranteed when the range of illumination on a barcode
surface is between zero and the following values:
Incandescent light to 3,000 lx
Fluorescent light to 3,000 lx
Sunlight to 50,000 lx
Opticon
OPN 2001
Specifications Manual
Direct light or specular reflection from a light source should be prevented from entering
the acceptance area.
Note: α, β and γ respectively represent pitch, skew and tilt. Please see section 8 for how
these values are defined.
5. Controls
Parameter Specification
Memory: Flash ROM 512 KB (372 KB program storage + >1000 barcodes + time stamp)
Usable time / operating period 1000 decodes
Data hold time Indefinite
Memory RAM 64 KB
Microprocessor ARM7, 32 bits
Real-time clock Quartz RTC, time and date programmable, leap year handling,
Keyboard 1 scan button, 1 clear button
O/S Proprietary
(accuracy +/60 sec./month)
7
6. Electrical Specifications
6.1. Absolute Maximum Ratings
Parameter Symbol Value Unit
Power supply voltage (VDD to GND) VDD -0.3 to 6.5 V
Input voltage VIN -0.5 to VDD +0.5 V
Power ripple 0.1 V p-p max. (10-100 kHz) V
6.2. Recommended Operating Conditions
Item Symbol Conditions Min Typ Max Unit
Opticon
OPN 2001
Specifications Manual
Power supply voltage
Input voltage Vin 0 － VDD
V
DD
6.3. Electrical Characteristics
Parameter During Symbol Min Typ Max Unit
Operating
current *
Battery
specifications
When OFF I
Voltage between terminals V
Scans when fully charged ** 1000 - - times
Start up time Td - 50 - ms
Scanning IOP 93 96 150 mA
Communicating I
Standby I
Charging I
Rated capacity 140 150 - mAh
Charging current I
Charging time T
Battery 3.1 - 4.2
USB 4.5 5.0 5.5
41 43 45 mA
com
24 25 26 mA
PRE
106 113 120 mA
CHG1
17 18 19 μA
off
2.75 3.7 4.2 V
BAT
59 66 73 mA
CHG2
- - 2.5 hour
chg
Ｖ
Ｖ
Ｖ
Conditions
• Connect 1Ω resistance to a 3.7 volt power supply line in series and measure
• Power supply voltage is measured at the terminal of the secondary battery.
• The operating current specifications for power charging or communicating are
the current by the voltage between both ends of resistance.
described based on the power current from the USB interface.
8
Loading...