Oppo LT-201, LT-2007 User Manual
USER MANUAL
TFT-LCD TV/DVD COMBO
DVD/SVCD/VCD/CD/CD-R/CD-RW/MP3PLAYER
CH
SOURCE
VOL
LT-2007
MENU
CAUTION:
TO PREVENT ELECTRICAL SHOCK. DO NOT REMOVE THIS
COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
SAFETY PRECAUTIONS
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
WARNING:
TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR
SHOCK HAZARD. DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated dangerous voltage within
the product's enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons
""
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of important
operation and maintenance (servicing) instruction in
the literature accompanying the appliance
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES
ARE PRESENT INSIDE THE ENCLOSURE.
DO NOT OPEN THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL
ONLY.
WARNING: THE APPARATUS SHALL NOT BE EXPOSED TO DRIPPING
OR SPLASHING AND THAT NO OBJECTS FILLED WITH
LIQUIDS, SUCH AS VASES SHALL BE PLACED ON THE
APPARATUS.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE
SLOT, FULLY INSERT.
CAUTION: THESE SERVICING INSTRUCTIONS ARE FOR USE BY QUALIFIED SERVICE
PERSONNEL ONLY. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT
PERFORM ANY SERVICING OTHER THAN THAT CONTAINED IN THE
OPERATING INSTRUCTIONS UNLESS YOU ARE QUALIFIED TO DO SO.
CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED.
REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE.
Important Safety Instructions
1)Read these instructions.
2)Keep these instructions.
3)Heed all warnings.
4)Follow all instructions
5)Do not use this apparatus near water.
6)Clean only with dry cloth.
7)Do not block any ventilation openings. Install in accordance with the manufacturer's
instructions.
SAFETY PRECAUTIONS
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding type plug has two blades
and a third grounding prong. The wide blade or the third prong are provided for your safety.
If the provided plug does not fit into your outlet, consult an electrician for replacement
of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
12) Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the
cart/apparatus combination to avoid injury from tip-over.
ADDITION SAFETY INSTRUCTIONS
1) Before connecting the AC power cord to the DC adapter outlet, make sure the voltage
designation of the DC adapter corresponds to the local electrical supply. If you are
unsure of your power supply , ask your local power company .
2) To avoid electric shock, never touch the inside . Only a qualified technician should open
the case of the product.
3) Do not use this product if power cord is damaged. Do not hang ang object on power cord
and do not install the power cord the place people walk.
4) Please hold power plug when cutting off power. Do not hold power cord.
5) Please do not unplug the power plug when this unit is working well.
6) If this unit is damaged, do not service yourself and you should contact the rofessional
maintenance personnel.
7) Please employ the equipped accessories to ensure its normal working and reduce incidents.
8) Please unplug power cord when not going to use for a long period.
9) High temperature will lead to abnormal working of this unit. Do not expose this unit to
sunlight or near other heating objects.
SAFETY PRECAUTIONS
10)To ensure the good ventilation around this product, please do not place this product
on sofa, bed and rug. When installing this product on the wall or bookshelf, you need
leave appropriate distance.
11) Do not expose this unit in rain or near humid places such as kitchen and swimming
pool to avoid electric shock or fire. Prevent this unit from dripping or splashing. Do not
place objects full of liquid such as case on the unit.
12) Do not place this product on unstable cart, stand, tripod, bracket and table. Do not
clean the LCD screen with ethyl alcohol, toluene, ethyl lacid, methyl.
13) When smoke, abnormal smell or sounds appear inside, please cut off power immediately
and contact dealer or service center.
14) Never insert anything metallic into the cabinet ;otherwise it may create the danger of
electric shock.
15) After the service and maintenance, please let service person do safety check to ensure
the unit's normal working.
16) Socket is used as device for cutting off power, so make sure the socket easy to unplug.
This product employs CLASS I electric construction, so the connected socket should
be with secure grounding.
17) When replacing accessories, please ensure the maintenance person use the accessories
and tools appointed by manufacturer.
LOCATION AND FUNCTION OF CONTROLS
Remote control
1
Front panel
3
CONTENT
MENU SETUP
Picture
Sound
TV setting
9
Function
10
78
VGA SETUP
Picture
Sound
Monitor setting
Function
15
17
16
18
Change source operation
6
CHANGE SOURCE OPERATION
INSTALLATION AND CONNECTION
Battery life
4
Battery installation
4
Power adaptor installation
4
Connecting figure
5
Video setting menu
13
AV AND S-VIDEO SETUP
DVD OPERATION
Brief introduction
19
Comparison between DVD
and other discs
19
Function introduction
19
Features
20
Play from the desired position
27
Zooming the displayed frame
29
Select subtitle
26
Slow playback
27
Repeat playback of selected segment
26
Repeat playback
26
Compatible disc types
21
Playback
22
DVD menu playback
24
Volume control
24
23
Display
Select TV system
22
Pause/step playback
23
25
Select track to play directly
by number buttons
Select audio/language
25
YPBPR/CBCR setup
14
YPBPR/CBCR SETUP
Fast playback
27
CONTENT
DISPLAY MODE
Display mode
40
SPECIFICATIONS
Specifications
39
TROUBLE SHOOTING
DVD trouble shooting
38
Sound and TV trouble
37
Image trouble
37
DVD FUNCTION SETUP
General setup
33
Speaker setup
35
Usage of equipment and
5-1N-1 card reader
Initial setup
34
Audio setup
33
33
29
Change power-on logo freely
30
MPEG4 and JPEG file playing
29
Memory
+
STANDBY EJECT
VOL
DVD SETUP
CH
VOL
GOTO
REPEAT SLOWA-B
TITLE
PICTURE
SYSTEM
SUBTITLE
SOUND
SLEEP
SOURCE
ZOOM
ANGLE
P/N
DISPLAY
CH
MENU
MUTE
DVD/USB
DVD MENU
AUDIO
CAPTURE
OK
MTS
BATTERYBATTERY
LT-2 007
CC
1
Remote Control
Select program number
Number buttons
2
Select upward/downward in the menu, and
increase or decrease channel number in TV
mode
Up/Down cursor(menu select button)
6
Move leftward/rightward or adjust the
selected item in the menu, and Increase or
decrease volume.
Left/Right cursor(menu adjustment button)
7
11
NEXT button
Select the next chapter or track in DVD.
REPEAT button
Repeat playback in DVD
14
Enjoy DVD from different angles
ANGLE button
15
ZOOM button
Zoom in or out the playing picture
in DVD mode.
16
33
3
RETURN button
Return to the previous channel in TV mode
/menu in DVD mode.
AV or S-VIDEO select color system
DVD: Select the color system PAL or NTSC.
SYSTEM button
18
LOCATION AND FUNCTION OF CONTROLS
1
4
SOURCE button
Switch signal sources:TV, DVD, AV,
S-VIDEO, YPBPR/CBCR, VGA.
20
SLEEP
Change sleep time between: OFF, 10MIN,
20MIN, 30MIN, 60MIN, 90MIN, 120MIN.
MENU button
Enter and exit the menu, which is
different in different signal modes
5
Increase channel number/Enter the DVD
menu.
CH+/ DVD MENU button
8
20
Stop button
Stop playing in DVD
10
12
FF button
Fast forward playback in DVD mode
17
Enter DVD function setup menu
DVD SETUP button
9
CH- /TITLE button
Decrease channel number/DVD titles.
13
SLOW
Playing the DVD at a low speed.
19
Display disc playing information or channel
information.
DISPLAY button
Disc In/Out in DVD mode.
EJECT button
1
Quickly change to DVD mode.
+
STANDBY EJECT
VOL
DVD SETUP
CH
VOL
GOTO
REPEAT SLOWA-B
TITLE
PICTURE
SYSTEM
SUBTITLE
SOUND
SLEEP
SOURCE
ZOOM
ANGLE
P/N
DISPLAY
CH
MENU
MUTE
DVD/USB
DVD MENU
AUDIO
CAPTURE
OK
MTS
BATTERYBATTERY
LT-2 007
CC
LOCATION AND FUNCTION OF CONTROLS
POWER/STANDBY button
Switch in standby mode and power-on mode.
20
Confirm the functions
OK button
21
VOL+/- button
Increase or decrease volume
22
Play normally
Play button
24
Pause playing/Step playback in
DVD mode
Pause/Step button
25
Fast backward playback in DVD mode.
FB button
27
Play from the selected time point in
DVD mode.
GOTO button
28
A-B button
Segment repeat
29
31
CAPTURE button
Capture the currently played image and
set it as the power-on logo in DVD mode.
SOUND button
Select sound field modes: Music,
Film, News and User.
33
20
21
22
23
24
25
26
27
28
29
30
31
33
34
35
32
2
34
MTS/AUDIO button
TV: You can change sound mode as MONO,
SAP and STEREO of you television sound
system supplied. /DVD: Switch the output
language or channel
23
Switch in mute on/off
Press MUTE button to mute and open
CC mode, and the indication,symbol
appears on the screen. Press this
button again to cancel mute.
MUTE button
Select the previous chapter or track
PREVIOUS button
26
35
CC/SUBTITLE button
Open or close the CC/Select
subtitle language, in DVD.
30
DVD/USB button
Switch in DVD and USB or card reader
32
Switch different picture modes:
Standard, Dynamic, Soft and User.
PICTURE button
Through adjusting the front panel, you may realize the basic control of the unit.
S.N.
Item
IR sensor window
Decrease the channel number in TV mode; select menu item
downward when menu displays.
Increase the channel number in TV mode; select menu item
upward when menu displays.
Decrease the menu adjustment item value or confirm the
functions and decrease the volume.
Increase the menu adjustment item value or confirm the
functions and increase the volume.
Pause or play
SOURCE
CH
CH
VOL
VOL
PAUSE/PLAY
LOCATION AND FUNCTION OF CONTROLS
The functions of front panel buttons are as follows:
SOURCE MENU, select in TV, DVD, AV, S-VIDEO, YPBPR/CBCR, VGA.
OPEN/
CLOSE
MENU
Disc In/Out; quickly change to DVD mode.
Enter and exit the menu.
POWER/
STANDBY
Description
CH
SOURCE
VOL
•
••
When no signal input within 2 minutes in VGA mode, this unit
automatically enters standby mode.when no signals input within
5 minutes in other modes,this unit automatically enters standby
mode, meanwhile the power indicator light becomes red.Press
[POWER] button and this unit enters working mode.
••
Disc In/Out door
DOOR
3
FRONT PANEL
MENU
When installing battery, please make the two polarities of battery accord with the two polarities
inside the battery case (positive upward, negative downward), as the following figure:
Generally speaking, the battery can be used for one year. But the detailed battery life
and usage times are related to the remote control operation.
If the remote control is still invalid when near to the unit, please replace the battery.
Please use CR2025 battery.
NOTE:
Do not use rechargeable battery .
Do not charge the battery, short-circuit, disassemble, heat or throw it into fire.
Take care not to fall and beat the remote control, which will damage the remote control
or cause function trouble.
CAUTION
Please put the battery away from children. If swallow it by error, please contact the
local doctor immediately.
Please confirm whether accessories have power adaptor.
Please make sure to use power adaptor in specification range, otherwise it will
cause trouble.
+
-
1
1
2
3
3
Take down battery
case cover
Install battery
Close battery case cover
1
2
3
INSTALLATION AND CONNECTION
1
2
4
BATTERY INSTALLTION
POWER ADAPTOR INSTALLATION
BATTERY LIFE
If the battery of remote control will not be used for a long time, please take if out.
After well connecting all cords, you may plug power cord.
INSTALLATION AND CONNECTION
3. AV signal output terminal
2. Coaxial digital audio output terminal
5. 5V, 12V DC power input terminal
8. YPb/CbPr/Cr connecting terminal
6. VGA signal input terminal
7. S-video signal input terminal
9. TV signal input terminal
10. USB jack
11. AV input terminal
4. PC sound source input terminal
1. Headphone output terminal
6
7
3
1
4
8
2
5
9
10
11
5
CONNECTING FIGURE
DVD or VCR
NOTE
CHANGE SOURCE OPERATION
This product change source by Source Menu. Press [SOURCE] button or [SOURCE] key
to display the menu as follows:
DVD
AV
S-VIDEO
SCART
VGA
The current source item is highlighted. Through press [ SOURCE] button on the
remote control or [ SOURCE] key, you select source item which you want to change
to, then press [ /OK] button or [ ] key or wait a few seconds to confirm your choice
that change to highlighted source item.
6
CHANGE SOURCE OPERATION
DVD
AV
S-VIDEO
YPBPR/CBCR
VGA
TV
Item
BRIGHTNESS
To adjust brightness
CONTRAST
To adjust contrast
SATURATION
To adjust color saturation
If your TV type is "AIR TV"this product can store up to 68-channel programs (2 69),
else if your TV type is the others type this product can store up to 125-channel
programs (1~125) . You can select your favorite channel through [CH+/-] or number
buttons, and you can scan and store all of the channels through auto scan.
In TV mode, press [ MENU] button on the remote
control, or [MENU] key on the front panel the menu
will show as follows:
Through pressing [ ] button on the remote control,
you can select menu sections(menu sections consist
of
. Press [OK]or [ ] button to enter
this menu section.
" PICTURE " , " SOUND " , "TV SETTING " ,
"FUNCTION ")
Press [ ] button on the remote control to select
the item, and then press [ ] button to adjust
parameter value. Press [MENU] button to return
to menu section.
Select " " and menu will show as follows:
Press [ ] button to select items and [ ]
button to adjust.
MENU SETUP
Description
SELECT RETURN
MENU
BRIGHTNESS
SATURATION
CONTRAST
SHARPNESS
TINT
PICTURE
50
40
50
34
50
SHARPNESS
To adjust picture sharpness
TINT
To adjust picture tint, only valid in N 3.58/N 4.43 and display
mode with V-scanning frequency equal to 60Hz.
7
PICTURE
There are four modes in picture mode: User, Standard, Dynamic and Soft. You can press
[PICTURE] button to select any one of these modes.
User Standard
Dynamic
Soft
SELECT RETURN
MENU
SATURATION
CONTRAST
SHARPNESS
TINT
PICTURE
40
50
34
50
BRIGHTNESS
50
ENTER
OK
ADJUST
Item
BALANCE
TREBLE
To adjust balance of left and right channels
To adjust bass
To adjust treble
Select " "and menu will show as follows:
MENU SETUP
BASS
Description
40
50
34
BASS
BALANCE
TREBLE
SOUND
SELECT RETURN
MENU
8
SOUND
There are four modes in sound mode: User, Music, Film, News. User may press
[SOUND] button to select any one of these modes, the adjusted value is saved in User
mode.
User
Film
News
Music
Press [ ] button to select item and press [ ] button to adjust . The following is sound
item description.
ENTER
OK
40
VOLUME
VOLUME
To adjust volume
MENU SETUP
9
To select"YES"or"NO", You can select "YES" to make current
channel unaccessible while using [CH+/-] button to browse
channels.
Press [ ] button to select item and press [ ] button to adjust or activate.
Item
CHANNEL
To change the current channel number.
SKIP
FINE TUNE
To adjust the channel frequency accurately to make the sound
and picture effect better.
TV TYPE
To select the TV type between: AIR TV, STD CABLE, IRC CABLE,
HRC CABLE.
Description
AUTO SCAN
Press [OK] or [ ] button of remote control or [ ] key to search
programs and store all of them automatically.
Select " " and tuning menu will show as follow:
TV SETTING
CHANNEL
2
SKIP
NO
FINE TUNE
55.25MHZ
TV TYPE
AUTO SCAN
SELECT ENTER
OK
RETURN
MENU
TV SETTING
NOTE
During the searching, you can press [MENU] button to stop.
AIR TV
Loading...