Read through the following information carefully. Failure to follow these safety
precautions could result in danger or illegal activities.
Page 8
Safe Startup
Do not switch on the device when phone use is prohibited or when it may cause
interference or danger.
Traffic Safety First
Traffic safety is always of first importance. Use of phones and headphones while
driving a vehicle or riding a bicycle is not recommended and is illegal in some areas.
Obey and follow all related local laws.
Switching off Device at Gas Stations
Turn off your phone when in any area with a potentially explosive atmosphere, such
as gas stations or any other fueling area. Sparks in such areas could cause an
explosion or fire, resulting in serious injury or even death.
Switching off Device When On Board an Airplane
Wireless devices might be prohibited while in the air in some countries or regions.
Obey all related local laws and turn off your phone or switch to airplane mode.
Switching off Device near Medical Equipment
Hospitals or healthcare facilities might use radio-frequency-sensitive equipment.
Obey the relevant rules and regulations.
Switching off Device at Blasting Areas
To avoid interfering with blasting operations, turn off your phone w
-
Radiation
Nearly every electronic device gives off radiation. Mobile phone use does not
increase the risk of getting brain cancer or other head tumors. Its effect in humans is
negligible.
Interference
Nearly every electronic device is susceptible to interference for external sources if
Page 9
inadequately shielded or designed. As a result, your phone may cause interference
with other devices.
Temperature
Operate your phone in a place where the temperature is always between 10℃ to
45℃. Using or storing your phone in a too hot or too cold environment might
damage the battery, or even cause your phone to short-circuit or burn.
Proper Usage
Use your phone appropriately. Do not touch the antenna area unnecessarily when
the phone is turned on. Do not drop, disassemble, crush, bend, deform, puncture,
incinerate, or insert foreign objects into your phone.
Qualified Maintenance and Service
Never attempt to repair or modify the phone yourself. If your phone has any
hardware or software failure, do not use it until you take it to an authorized service
provider. Do not disassemble or root your phone yourself, otherwise the warranty
service will be terminated immediately.
Batteries, Chargers and other Accessories
Do not dismantle the built-in lithium-ion battery of your device. Use only the
batteries, chargers and other accessories authorized by OPPO, for third-party
accessories might cause damage or danger.
Waterproofness
Your device is not waterproof. Do not use your device in rain, or other wet locations.
Avoiding Hearing Damage
Permanent hearing loss may occur if the receiver, speakerphone, headphones, or
earpieces are used at high volume. You can adapt over time to a higher volume of
sound that may sound normal but can be damaging to your hearing. Set the volume
to a safe level to protect your hearing.
Page 10
Avoiding Eyestrain
stimulation to your eyesight. Long-term viewing of your phone in normal or darker
environments will damage your eyesight. When watching video or reading text on
your phone, avoid prolonged use, take breaks and turn on eye protection mode to
prevent eyestrain.
Glass Parts
glass. This glass could break if your phone is dropped on a hard surface or receives a
substantial impact. Do not attempt to touch or clean the broken glass. Stop using
your phone until the glass is replaced by an authorized service provider.
Connecting to Other Devices
Before connecting to other devices, carefully read the user manual for more detailed,
accurate and safety instructions. Do not connect to incompatible products.
Being Aware of Laser Safety
If your phone supports laser focusing, carefully read the user manual before using
it. Failure to follow instructions might lead to harmful radiation exposure. To prevent
direct exposure to laser beam, do not attempt to
avoid keeping close contact with laser light.
3. Get started
3.1. Quick look
3.1.1. ColorOS 5.1 Features
ColorOS 5.1 New Features
With ColorOS 5.1, noticeably the graphics and colors are more vivid and crisp. Even
with its design, it hasn't lost touch of its fundamental purpose: use with ease and
time, calls, and messages even when the screen is off. Calculator has been more
efficient with its added functions for more conversions.You can fix your volume
Page 11
more layers to prevent digital theft from getting your personal data.
Brand-new visual design
relaxing. The App icon has a brand new makeover having circle shapes and
Control Center has green color with white background which is soothing to the
eyes. To have a cleaner and minimalist setting, System Apps sort and group
settings like Call, Contacts, Messages, Phone Managers and others into one
location.
Photo album on Smart Assistant
Smart Assistant. We all know that Smart Assistant is your happy helper and
intuitively knows what you want and one of those is memories. It will show photo
albums of pictures that matter to you.
Enjoy the new features of Calculator
The new Calculator app not only combines the standard and scientific calculators
but added useful functions which will come handy in time.
Share your internet connection through Wi-Fi Tethering
Wi-Fi Tethering. This makes your phone as a Wi-Fi router which basically has the
same functionality to that of a traditional router which enables the sharing of
internet to other Wi-Fi devices.
Make use of the Screen Clock
Screen Clock. If you want to know who called you or messaged you without
opening the screen, then you would love the Screen Clock function. You can set
display time and reminders like missed calls, unread SMS, unread Wechat, and QQ
messages even when the screen is off.
Page 12
Fixed your volume button to a specific ringer
Default Volume Button Adjustment. Sometimes you wanted to manage the
volume of the ringtone using the physical buttons but the one that gets adjusted is
the music volume. You can now choose the physical buttons to either adjust for
the Ringtone Volume or Media volume only.
Prevent theft by using Privacy Passcode
Privacy Passcode. We all know how some apps are snooping to get your personal
data stored on the phone. Privacy Passcode toughens your privacy through series
of encryption methods and a secret question that you can customize. When this is
turned on, the validation will be used for all privacy features such as App
Encryption and Private Safe.
Add Marker Pen to highlight when you take and edit a screenshot
Add Marker Pen
long screenshots of your conversations on any messenger, or the screenshot of a
full web page, or screenshot of some long pages in apps. You can edit the
screenshots directly on the Photos app using a set of professional editing tools.
Also, a marker pen has been added to highlight words, draw, and personalized the
OPPO ID on settings
An added feature on your setting page is your OPPO ID which can be used to
access apps such as OPPO Cloud, App Store, and Theme store.
Page 13
New camera features for taking photos an selfies
Models
A3s, A3
Appearance
A3s - Red and dark purple colors (RAM 2GB/3GB Version)
Size and Weight
Height
156.2mm
Width
75.6mm
More new stickers. There are new stickers that you can choose from. Your pictures
will definitely be cooler, cuter, and funnier. To use stickers to decorate your photo,
choose STICKER, click , then choose from array of stickers.
ColorOS 5.1 is compatible with these devices
Page 14
Thickness
8.2mm
Weight
168g with battery
Basic Parameters
Operating System
ColorOS 5.1, based on Android 8.1
GPU
adreno506
RAM
2GB/3GB
Storage
16GB/32GB
Battery
4230mAh
Processor
Qualcomm Snapdragon 450
Display
Size
6.2 inches (15.7cm)
Type
In-Cell IPS
Resolution
HD + (1520 by 720 pixels)
Page 15
Colors
16 million colors
Touch
Multi-touch, Capacitive Screen
Digital Compass
Light Sensor
Proximity Sensor
Accelerometer
In the Box
OPPO A3
Adapter
Headphones
Micro USB Cable
Information Guide and warranty conditions
Quick access guide
Page 20
SIM Key
Custody
Product ID
CPH1837
Buttons and components
Page 21
F7 features
A.
Front camera
B.
Receiver
C.
Sleep/Wake button
D.
Volume up button
E.
Volume down button
F.
Rear camera
G.
Flash
H.
SIM card tray
I.
SIM tray hole
J.
Noise cancelling microphone
K.
Speaker
L.
Micro-USB port
Page 22
M.
Microphone
N.
Headset jack
Functions for buttons and combination keys
To learn more features, see Quick Look at OPPO phone.
3.1.2. Sleep/Wake button
The Wake/Sleepbutton on the right side of your phone has a number of different
uses.
When the phone is on
Wake or lock the screen: With the phone is powered on, press the Wake/Sleep
button once and it will wake the phone up to the point that you can see the lock
screen, like the clock and any notifications that are setup to display there. When the
phone screen is awakened, pressing this button will blacken the screen and lock the
phone.
Take a screenshot: Press and hold theSleep/WakeandVolume Downbuttons at
Page 23
the same time and your phone will take a picture of whatever is displayed on the
screen. Click the screenshot, and then choose to a take a long screenshot, send, edit
or delete the screenshot. If you save the screenshot, you can view it on Photos.
End a call: Go to [Settings] > [Additional Settings] > [Accessibility] and turn on
[Power Button Ends Call], then you can press the Sleep/Wakebutton to end phone
calls.
Turn off the phone: Press and hold theSleep/Wakebutton for a few seconds,
whether the phone is on the lock screen or home screen, it will ask you to slide down
to power off the device.
Force restart the phone: Press and hold theSleep/WakeandVolume Upbuttons
for about 10 to 12 seconds until your device is turned on. View force restart your
phone.
When the phone is off
Turn on the phone: Press and hold the Sleep/Wakebutton for a few seconds until
you see the OPPO logo.
Force Restart the phone: Press and hold the Sleep/WakeandVolume Upbuttons
until your device is turned on. View force restart your phone.
Enter Recovery Mode: Press and hold the Sleep/WakeandVolume Downbuttons
at the same time to enter Recovery Mode.
3.1.3. Menu, Home and Return buttons
The traditional hardware buttons have been replaced with on-screen virtual
navigation keys which also offers fast and fluid gestures to operate your phone.
You can change the order of the virtual keys, and set them to appear only when
needed to free space on the screen.
Enable virtual navigation keys. Virtual navigation keys are default on. If you want
to enable them manually, go to [Settings] > [Smart & Convenient] > [Navigation
Keys] and click Virtual Key Navigation.
Page 24
Change the order of virtual navigation keys. The keys follow the typical order for
OPPO: Menu, Home, and Return from left to right. If you are left-handed, you can
change them to the return-home-recent order.
Hide the virtual navigation keys. When you launch a full-screen app, the keys will
automatically hide, and can be brought back with a simple swipe:
When in portrait mode, swipe up from the bottom.
When in landscape mode, swipe from the bottom to the left.
Page 25
Manually hide the virtual navigation keys. To set the keys to appear only when
needed, go to [Settings] > [Smart & Convenient] > [Navigation Keys] and enable
Page 26
Virtual Navigation Keys Can Be Hidden. Then you can clickon the left-lower
corner of the screen to hide the keys, and swipe from the bottom to reveal them.
Immersive navigation background.The system set multiple colors for the
navigation background to match the color scheme of the popular apps. The
background color is default white, and it will become translucent or immersive
when you open some of the third-party apps.
Page 27
3.1.4. Volume buttons
Volume buttons give you easy access to adapt over time to a proper volume of
sound. It refers not simply ringer or media, the phone also keeps track of the
volume level separately in headphone, microphone and speaker.
Media volume: When listening to music, videos and phone calls, use the buttons
on the side of the phone to adjust the volume. For information about avoiding
hearing loss, see Security Information.
Ringer volume: Use the Volume buttons to control the volume for the ringer and
alerts. When you press and hold the volume downbutton, your phone will switch
to silent mode.
Alarm volume: Use the Volume buttons to set the volume for alarm. The alarm still
plays a sound when the phone is in silent mode.
Call volume: When making or receiving phone calls, use the volume buttons to
adjust the volume of the call.
* You can also adjust the volume (except call volume) in [Settings] > [Sound & Vibration].
Page 28
Controlling the camera: Volume buttons can also be used to control your camera.
Go to [Settings] > [Camera] > [Volume Button] and set up the volume buttons for
Shutter or Zoom.
3.1.5. Micro-USB port
Micro-USB port is the connector on the bottom of your device where your battery
charger connects. It also doubles as the data port, which lets you transfer datato
and from a personal computer or other USB devices. Plug the cable in the port to
charge or transfer data.
Notice:
1. Repeated connecting and disconnecting of your cable can cause the port to
wear out, resulting in a poor connection to your cable.
2. Never force a connector into the port, for that might cause damage.
3.1.6. Headset jack
The headset jack is an audio socket that accepts a 3.5mm audio plug. Plug your
headset in the jack to listen to music, videos and phone calls. Do not force a
mismatched headset into the jack for that might cause damage.
3.1.7. SIM and SD cards
SIM card
Page 29
* Insert the SIM card before turning on your phone. If you hold a new SIM card, you might
need to wait until it is activated by the carrier before you can use it.
A SIM cardis provided by your carrier and is used to activate your phone's mobile
network. Because it has a small amount of memory, the SIM card not only enables
communications between two persons, but stores information such as phone
numbers, security data and more. When using the mobile network, you need to pay
charges. To avoid high charges, you can shop data plans with your carrier, or shop
international data roaming plans when traveling abroad.
Insert the SIM card: Most OPPO Smartphones support Dual SIM. You can choose to
insert one or two.
1. Insert the card needle into the hole outside the card tray to pop it open.
2. Pull out the card tray and place SIM card(s) on it.
3. Put the card tray back in as the same orientation that you removed it.
Remove the SIM card: Remove the card(s) in the same way that you insert it(them).
SD card
The SD card is a way to store and transfer images, music, video and other data. You
SIM1, SIM2 and SD cards share the same card tray. Insert your SD card in the same
way that you insert the SIM card(s).
Page 30
3.1.8. Accessories came with OPPO phone
Along with the handset, the accessories came with are headset, USB Connecting
cable, Power adapter, SIM card tool and Phone case.
Notice:All photos shown are for illustration purpose ONLY. Actual products may
vary due to product enhancement.
Headset: A standard headset with 3.5 mm headset plug. Use to listen to music,
videos, and phone calls. Use the built-in microphone to talk. When playing the
music or videos, click the button once to pause or play a song or video.
USB Connecting cable: Use the cable to connect your phone to the computer to
chargeandtransfer files, or use it with the power adapter to charge.
Power adapter: Connect the power adapter to your phone using the included
cable, then plug it into a standard power outlet to charge the phone.
Page 31
SIM card tool: Use to pop out the SIM card tray.
Phone Case: Use to protect against drops and shock damage on the corners and
rear of your phone.
Page 32
3.1.9. Charging the battery
How to charge the battery:
Notice:All photos shown are for illustration purpose ONLY. Actual products may
vary due to product enhancement.
Charge with the jack: Connect adapter to your phone using the USB cable, then
plug it into a standard power outlet to charge the phone.
Connect to a computer to charge: Use the cable to connect your phone to the
computer to charge. Your phone will charge slowly if you connect it to the computer.
Charge with Power Bank: Connect Power Bank to your phone, and your phone will
be charged wherever you go. It is an absolute necessity if you are a frequent traveler.
Charging Notice:
1.Charge the phonewith the original charging accessories (including adapter, cable
and power bank).
2. It is recommended to charge your phone in a place where the temperature is
between 15° C to 40° C. Extreme ambient temperatures will affect flash charging
system.
Gestures
3.1.10. Gesture & Motion
Page 33
OPPO smartphone is designed to understand gestures. You can use gestures such
as tap, swipe, drag and spread to operate your phone.
To set up complex gestures for specific functions, go to [Settings] > [Smart &
Convenient] > [Gesture & Motion].
Screen-off Gestures
To set up screen-off gestures, you need to turn it on first.
Double tap to turn screen on: Turn it on to wake up your locked screen with a
double-click on the screen.
Draw O to start camera: When turn it on, you can draw O on the locked screen to
open Camera app.
Draw V to open torchlight: When turn it on, you can draw V on the locked screen
to open the torchlight.
Music control: When turn it on, you can draw ‖ to pause/play a track, or draw <
or > to switch the track when the screen is off.
Page 34
Add more screen-off gestures: OPPO smartphone of ColorOS 5.0 gives you 7
options, which are Draw ^, Slide up, Slide down, Slide left, Slide right, Draw M
and Draw W. Choose one to unlock the phone, call someone or start an app.
3-Finger Gesture
Take a screenshot. Swipe down the screen with three fingers.
Use Split-screen. Under the interface of an app, swipe ups the screen with three
fingers to enter split-screen mode.
Page 35
Motion
The motion-sensing technology is used in OPPO smartphone. Use it to let your
phone response to motion.
Smart call
Auto call when place at the ear: Before you can use auto call, you need to set the
default SIM card for calling. Go to a contact detail, call detail, message conversation
or info interface, put the phone near your ear and your phone will automatically
call that specific person.
Auto answer when near the ear: This function lets your phone to answer any
incoming calls automatically when putting the phone near your ear.
Switch from speaker for calls: Use it to automatically switch from speaker to
receiver when you put the phone near your ear during phone calls.
Flip to mute incoming calls: Use it to silence the ringer by turning the phone over
on a table or other flat surfaces.
Page 36
Mistouch Prevention Mode
Turn it on to prevent incorrect operations if the lock screen is covered.
Take selfies
Open Camera app and switch to the front camera. Click > Gesture on the top
of the screen. Pose the same hand gesture towards the camera, once the camera
captures that, it will take a photo automatically after two seconds. You can change
your pose and expression within this two seconds.
3.1.11. Key combinations
Generally, you can use two buttons of your phone to generate a specific result. The
common key combinations include:
When phone is on
Press and hold the Power and Volume Down buttons: Your phone will take a
screenshot for the current page. To take a long screenshot, click the screenshot,
then click Longshot.
Page 37
Press and hold the Power and Volume Up buttons
press and hold the button combination for at least eight seconds to force restart
your phone.
When phone is off
Press and hold the Power and Volume Down buttons: Phone will enter Recovery
Mode, which does help to update the system, wipe data, check disk and more.
Page 38
Status icon
What it means
Mobile network signal
network and can make and receive calls. The
more bars, the stronger the signal.
Airplane Mode
wireless communication abilities are disabled.
/
LTE/ LTE A
4G network is available, including LTE and LTEA. Your phone can connect to the Internet over
that network.
/
UMTS/WCDMA
3G UMTS network is available. Your phone can
connect to the Internet over that network.
Press and hold the Power and Volume Up buttons: Phone will be force restarted.
Press and hold the two buttons until your phone is turned on.
3.1.12. Status Icons
The icons in the status bar at the top of the screen give information about your
OPPO smartphone:
Page 39
EDGE /GSM
EDGE (GSM) network is available. Your phone
can connect to the Internet over that network.
Wi-Fi
Shows that your phone is connected to a Wi-Fi
network. The more bars, the stronger the signal.
See Connect to Wi-Fi.
Call Forwarding
Call forwarding is turned on.
VPN
Quiet Time
Quiet Time is turned on.
Portrait orientation lock
Phone screen is locked in portrait orientation.
Alarm
An alarm is set up on your phone.
Bluetooth
Bluetooth is on, or your phone is connected to a
Bluetooth device.
Bluetooth
Bluetooth Tethering is on.
Silent
Silent Mode is on.
Vibrate when silent
Phone vibrates when Silent mode is on.
HD Voice
Your phone is on a voice call over VoLTE.
Wireless Display
Wireless projector is connected.
Location Service
Location Service is on.
No service
Your phone has no signal.
Power Saving
Power Saving Mode is on.
LOGG-ING
Get a log for testing
Page 40
Message
Message notification
Voice over LTE
Your
Voice works to make your calls.
Game acceleration
Optimize the game display configuration to
fully utilize hardware resource
International Roaming
Your phone is using International Data
Roaming.
Kids space
Addiction prevention
Payment protection
Payment environment detection
3.2. Configuration Settings
3.2.1. Fingerprint, Face and Passcode
Setting a lockscreen passcode, privacy passcode, and face ID on your device are
security measures that all users should take. Follow these steps to set a passcode
that will be needed to unlock your phone and access the information stored on it.
Use a Lockscreen passcode on your OPPO phone
Set the Lockscreen Passcode
1. Go to [Settings] > [Fingerprint, Face & Passcode], enter [Lockscreen
Passcode], click [Turn on Passcode].
2. You'll be prompted to enter a 6-digit numeric code. If you want to use other
passcode types, ClickOther Encryption Methods.
Page 41
3. Choose from four types of passcodes:
Pattern Code: Allows you to draw a pattern with at least four dots connected.
4-Digit Numeric Passcode: Allows you to set a numbers-only passcode that contains four
characters.
4-16 Digit Numeric Passcode: Allows you to set a numbers-only passcode that contains four
to sixteen characters.
4-16 Digit Alphanumeric Passcode: Allows you to set a passcode that contains four to sixteen
numbers and/or letters as your preference.
Page 42
4. Draw your pattern or enter your passcode.
5. Re-draw or re-enter your pattern or passcode to confirm it and activate it.
Change the passcode
1. Go to [Settings] > [Face & Passcode], click [Modify Passcode].
2. Draw or enter your current pattern or passcode.
Draw or enter your new pattern or passcode. If you want to use other passcode
types, click Other Encryption Methods. at the bottom of the screen.
Re-draw or re-enter your pattern or passcode to confirm it and activate it.
Turn off the passcode
1. Go to [Settings] > [Face & Passcode], click [Turn off Passcode].
2. Draw or enter your current pattern or passcode to confirm.
View more details in Set and use a passcode with your OPPO smartphone.
Privacy Passcode
When this is turned on, the validation will be used for all privacy features such as
App Encryption and Private Safe.
1. Manage Privacy Passcode: Go to [Settings] > [Fingerprint, Face & Passcode] >
[Privacy Passcode] create an encryption code, then set or customize a security
question, then click Done.
Note: The security question can be used to reset the passcode.
Page 43
2. Change or turn off privacy passcodes: Go to [Settings] > [Fingerprint, Face &
Passcode] > [Privacy Passcode] enter the encryption code then click [Turn off
Privacy Passcode] or [Change Privacy Passcode].
3. Modify the security questions: Go to [Settings] > [Fingerprint, Face &
Passcode] > [Privacy Passcode] enter the encryption code click [Modify the
Security Questions] enter the encryption code again then set or customize a new
security question, click Done.
4. Bind security email address: The email used will be able to retrieve the
privacy passcode: Go to [Settings] > [Fingerprint, Face & Passcode] > [Privacy
Passcode] enter the encryption code click [Bind Security Email Address] enter the
encryption code again then enter email address, click Use.
5. Update bind security email address: Go to [Settings] > [Fingerprint, Face &
Passcode] > [Fingerprint, Face & Passcode] enter the encryption code click [Bind
Security Email Address] click Change Email Address then enter the encryption
code again, enter the new email address, click Use.
Page 44
Associate OPPO ID
1. Go to [Settings] > [Fingerprint, Face & Passcode] > [Privacy Passcode] enter
the encryption code toggle [Associate OPPO ID] Register or Sign in with your OPPO
ID credentials.
2. App Encryption: Go to [Settings] > [Fingerprint, Face & Passcode > [Privacy
Passcode] enter the encryption code click [App Encryption] select the apps to be
encrypted then press Enable Encryption. Once it is encrypted, you will see a
padlock symbol on the app that has been encrypted. Also see App Lock.
Page 45
Note: You have to enter an encrypted passcode and a security question before you
can use the other functions on Privacy Passcode.
Use a fingerprint on your OPPO phone
Before you can add a fingerprint, you need to create a passcode for your OPPO
phone. You can use fingerprints for:
Unlocking the phone from the lock screen.
1. Go to [Settings] > [Fingerprint, Face & Passcode], click [Add a Fingerprint].
2. Follow the on-screen instructions, placing your finger gently on the Home
button until your fingerprint is recorded.
Page 46
Repeat step 1 and 2 for as many fingers as you like.
Delete or Rename a fingerprint
1. Go to [Settings] > [Fingerprint, Face & Passcode], click the fingerprint you've
added.
2, Enter a name for your fingerprint, or click [Delete Fingerprint].
Page 47
Reset Passcode methods
Use fingerprint to reset passcode
Before you can use the reset feature, you must add at least one fingerprint to your
phone and enabled Fingerprint Unlock.
1. For you to see the "Use the Fingerprint to Reset Passcode" option on your
phone, restart the phone at any time during the 30 seconds countdown. See
Restart the phone.
Page 48
Note: You'll notice tha the timer will continue from where you left off.
2. After restarting the phone, Use Fingerprint to Reset passcode will be
accesible and you can now verify using your fingerprint and reset the passcode.
Reset passcode with fingerprint when the phone is unlocked.
When your phone is unlocked, you can change the lock screen password directly
from the Settings page.
Page 49
1. Go to [Settings] > [Fingerprint, Face & Passcode], enter the wrong password five
times, then your phone will temporarily restrict you from entering the passcode
again and ask you to wait 30 seconds.
2. When the waiting period is up, click Tap to reset passcode.
1. Place your finger on the fingerprint sensor, then enter your new passcode and confirm
it.
Reset password via Fingerprint or via Email
Page 50
1. Enter the wrong password five times, then your phone will temporarily
restrict you from entering the passcode again and ask you to wait 30 seconds the
click Forgot Password. You will given options to either reset using fingerprint or
thru the email that you have bounded on the phone.
Reset password via fingerprint
Place your finger on the fingerprint sensor, then enter your new passcode and
confirm it.
Page 51
Reset password with bind security email address
When you have forgotten your lockscreen passcode and you also haven't enrolled
face recognition or for some reason it did not work, you can still reset the password
as long as you have bounded your security email address at the initial phase of
password creation. See bind security email address.
How to reset password using bind email:
1.Enter the email address that you have bounded on the phone, then enter the
verification code that was sent thru your email, click Done. Now you can set a new
lockscreen passcode for your phone.
Page 52
Enroll a Face on your OPPO phone
Before you can add a face you need to create a passcode for your OPPO phone.
You can use face for:
Unlocking the phone from the lock screen.
Encrypting apps
Protecting files
Page 53
Enroll a face
1. Go to [Settings] > [Fingerprint, Face & Passcode], click [Enroll Face].
2. Follow the on-screen instructions. To get the ideal effect, keep the phone 2050cm away from your face and position your whole face in the circle until the
enrollment is done. Avoid very bright or dim environment when enrolling your
face.
Page 54
Delete Enrolled Faces
Go to [Settings] > [Fingerprint, Face & Passcode], click [Delete Enrolled Faces].
Use Face for screen unlocking, App Lock and File Safe. Go to [Settings] >
[Fingerprint, Face & Passcode] > [Use Face to], then turn on the features you
want to use.
View more details in Add and use a fingerprint on your OPPO Smartphone.
Note: Not all phone's running on ColorOS 5.1 supports fingerprint. It still depends
on the design of the phone.
3.2.2. Set up other mail and calendar accounts
In addition to the apps that come with your phone, if you want to use other mail
and calendar apps, add the accounts to your phone to let the apps associated with
those accounts sync with your phone.
Set up an account. Go to [Settings] > [Accounts and Sync], then click [Add
Account].
Repeat the steps for as many accounts as you like.
3.2.3. Transfer data from the old phone to OPPO
smartphone
You can transfer over all of your data - with no risk or loss of quality, using Clone
Phone. With Clone Phone, you don't need to leave any of your data behind with
your previous device. Take it all with you in three easy steps:
Page 55
From an iPhone to an OPPO Phone
1. On your OPPO Phone, go to [Tools] > [Clone Phone], then select "This is the new
phone" and "Import From an iPhone". Connect your phone to the Internet when
promoted.
2. Sign in the iCloud account of your old iPhone. Enter the Apple ID verification code
you received on your iPhone or in the SMS and start computing cloud data.
From an Android Phone to an OPPO Phone
1. On your OPPO phone, go to [Tools] > [Clone Phone], then select "This is the new
phone" and "Import from an Android Phone".
Page 56
2. On your old phone, click [Clone Phone] from the Home screen, select "This is the
old phone" and scan the QR Code generated by the new phone to start cloning.
You can also select the data (Personal Data, System Data, Applications, Storage
Data) to be cloned by clicking "Manually Select the Data to be Cloned."
3. Enter the lock screen password to continue.
If the QR code cannot be scanned
Connect
that a popfind the Hotspot name on the Wi-Fi setting and enter the password then you can
start transferring files.
Page 57
If old phone doesn't have a Clone phone
1. Click You can tap to install> and it will direct you to a web browser or open a
browser from your phone and go to the
website: i.clonephone.coloros.com/download. (Note: this only works when you
open it using your mobile phone. This will not open on your computer).
Page 58
2. Once you have entered the link above, it will prompt you to download the Clone
Phone downloader APK file under the Download folder. You may change the folder
path if you wish just click "Change the directory" then Click "Save".
3. Once download is done. On your home screen, go to the notification panel for
the downloaded file or go to Files/File Manager and click
folder you chose to save the file.
Install
Page 59
transfer files.
Done and you can now start to
Note: The duration of the Clone Phone process depends on how big the data you
are going to transfer. Please patiently wait before it is completely transferred.
3.2.4. Date and Time
Knowing the time and date is crucial to keeping on schedule. If you want to set the
date and time display on your OPPO phone, or if you're out of synch or need a time
update, just start with step 1 as below.
1. Go to [Settings] > [Additional Settings] > [Date & Time], click it.
Page 60
2. 24- Hour Format. Switch from 12-hour or a 24-hour format optionally.
3. Automatically Set Date and Time. Enable [Automatically Set Date and Time] if you
want to use the data given by your network provider or your GPS, or you can set
the time yourself if you prefer. See step 4.
4. Set Manually. You can manually set the time and date. To do so,
disable [Automatically Set Date and Time], and then:
Select your time zone. Click [Time Zone] and select the location you would like
to adjust your time to.
Change the date and time. You will see the date and time appear under the
current time zone. Drag your finger across each column to change the date and
time. Scroll wheels will appear to allow you to change the date and time
simultaneously.
View more details in Set up date and time on your OPPO smartphone.
3.2.5. Language and Region
OPPO smartphone offers you an easy access to configure it to display information in
another language. If you want to change its language to yours, or if you've relocated
to a new country, you can change language and region by following a few easy steps.
1. Go to [Settings] > [Language & Region], click it.
Page 61
2. Find your desired region. Click Region and change the region you want to use.
3. Find your desired language.
Click [Language], you will see a list of languages. Scroll down to find the
language you wish to use.
Select your desired language and click "Done." A confirmation message will
appear at the bottom of your screen. Confirm the change by clicking "Change
to ____." Then your OPPO phone will be in the new desired language.
Page 62
3.2.6. Connect to the Internet
OPPO smartphone connects to the Internet whenever necessary, using a Wi-Fi
connection or mobile network.
Wi-Fi connection
1. Go to [Settings] > [Wi-Fi], or swipe down from the top of your screen to open
Control Center, then tap . The detected Wi-Fi networks will be displayed.
2. Tap the Wi-Fi network you want to connect to.
3. Fill in the password if required.
Mobile data connection
Go to [Settings] > [Dual SIM & Cellular] and enable [Mobile Data], or swipe down
from the top of your screen to open Control Center, then tap .
Notice: Enabling the mobile networks connection may result in extra cost. Check
with your mobile network service carrier.
4. What's new in ColorOS 5.1
4.1. New Features of Calculator
The new Calculator app not only combines the standard and scientific calculators
but added useful functions which will come handy in time.
Page 63
Delete the last digit. Click .
Clear the calculation results. Click .
Hide or show the keypad. Click in the middle of the screen to hide the
keypad. Click Calculate or the calculation formula to resume.
Page 64
Copy a calculation result to clipboard. Long press the results and it will be
copied to the clipboard. You can click to continue calculating or click if
you want to clear everything and start a new one.
Use the scientific calculator. Rotate your phone to landscape orientation.
New functions in Calculator. There are a lot of important functions that has been
added. Click at the top right portion of your calculator then select a function
that you would like to use.
Page 65
The New Functions
Currency Conversion if you want to know what are the current real time
conversions. Click to select the currencies you would like to convert. It is on
alphabetical order with their national flags beside them. You can also click to
search for the country or currency that you would like to convert. Click to
delete the last digit and click to clear results. Long press the result and it will
be copied to the clipboard
Page 66
Note: Given that the exchange rates are volatile and change every second, you
need to have an internet connection for this to function and to get the real time
conversions.
Click to select the unit you want to convert. Click to delete the last digit and
click to clear results. Long press the result and it will be copied to the clipboard.
Page 67
4.2. New Features of Smart Assistant
The new Smart Assistant combines information such as Weather, Steps Tracker,
today. Quick apps and favorite contacts allow you to open an app or call someone
with only one tap. You can also customize Smart Assistant to better suit your needs
and to emphasize what you actually care about.
Open Smart Assistant. Go to [Settings] > [Smart & Convenient] and turn on [Smart
Assistant]. Or swipe right from the left edge of the Home screen, then click Turn on
Smart Assistant.
Page 68
Customize Smart Assistant widgets. Scroll to the bottom of Smart Assistant
screen, then click Edit. Click or to add or remove widgets. To arrange the
order of your information, touch and hold , then drag to a new position.
Page 69
Information you can get from Smart Assistant:
Quick Functions: Provides you with quick access to apps. Click , click Add More
Apps, then choose an app. You can open the app directly by clicking its icon in
Smart Assistant. You can also add the convert CUR on the quick Functions, which
is quite convenient.
Weather: Provides you with weather conditions of your current location.
Steps Tracker: Keeps track of your daily steps and distance covered.
Events: Keeps track of all your events in the Calendar app.
Page 70
Favorite Contacts: Lets you make call with one tap. Click , then choose a
contact. Click the head portrait to call the person.
Photos: You can have a quick view of your latest photo album on your memories.
Please make sure that you have photo on your memories so that it will show on
Smart Assistant page.
.
4.3. Use Wi-Fi Tethering
This makes your phone as a Wi-Fi router which basically has the same functionality
to that of a traditional router which enables the sharing of internet to other Wi-Fi
devices. See
Use Wi-Fi Tethering
1. Go to [Settings] > [Other Wireless Connections] > and enable [Wi-Fi
Tethering].
2. In [Wi-Fi Tethering Settings] you can change the name, manage security, and
input passcode.
Page 71
Note: Wi-Fi Tethering will automatically turn off if no device is connected for more
than 10 minutes. This is to save energy. A maximum of 10 devices can be
connected but cannot be used simultaneously with features such as OPPO Share,
Wi-Fi Direct, or Multi-screen Interaction.
4.4. NFC
NFC stands for Near Field Communication. It means your phone can easily interact
with something as long as it is near to each other or in close proximity. It is usually
around 4 centimeters. The devices then can send and receive information without
any cost. No Wi-Fi or Data connection needed. This is great for making payments,
reading tags in NFC poster, or transferring files.
Page 72
Here are ways you can enable NFC:
Through the Settings:
1. Go to [Settings] > [Other Wireless Connections] > [NFC] then toggle to enable
NFC.
2. To be able to share files, Android Beam should be enabled.
Page 73
Through the Control Center:
1. Swipe down from the very top of any screen (except the notch at the top center of
the display)
2. Press to enable NFC. The icon will have a green highlight when it is enabled.
Note: Some devices may not have NFC.
4.5. Default volume button adjustment
Sometimes you just wanted to manage the volume of the ringtone using the
physical buttons but the one that gets adjusted is the music volume. So you
manually open the volume setting and fine-tune it. But now, you can choose the
physical buttons to either only adjust the Ringtone Volume or the Media volume.
Page 74
To have a default volume, go to [Settings] > [Sound & Vibration] > [Default Volume
Button Adjustment] then choose the default volume adjustment type: Ringtone
Volume or Media Volume. Once done, your physical volume up and down buttons
will only change the default volume that you have chosen.
4
Page 75
4.6. New Feature Take and Edit
Screenshot
and take
long screenshots of your conversations on any messenger, or the screenshot of a
full web page, or screenshot of some long pages in apps. You can edit the
screenshots directly on the Photos app using a set of professional editing tools.
Also, a marker pen has been added to highlight words, draw, and personalized the
Capture the current page
Press and hold the Power and Volume Downbuttons for about 2 seconds, the
screen will briefly flash white, and you'll hear a shutter sound if your phone's sound
is on.
Gesture Screenshot: Go to [Settings] > [Smart & Convenient] > [Gesture &
Motion] and turn on [3-Finger Screenshot]. Then swipe down the screen with
three fingers to take a screenshot.
Page 76
Capture a long screenshot
With OPPO smartphone, you can easily take longer and scrolling screenshot with
simple clicks.
To capture long screenshots:
1. Press and hold the Power and Volume Down buttons for about 2 seconds, or
swipe down the screen with three fingers to take a screenshot of the current page.
2. Click the screenshot, click Long screenshot, then scroll the page up or down and
stop until you have finished capturing all the contents you want.
3. Click Done to generate a long screenshot. The image is saved on the Photos app.
Edit a screenshot
After you've taken a screenshot, click it, then click Edit. . You can use the fancy new
markup features to optimize it instantly, such as cropping, adding text, light, filters,
and more. Click Done to save your changes
Page 77
Use the Marker Pen
After you've taken a screenshot, click it, then click Marker Pen. . You can highlight a
word or write a note on the image. Click Done to save your changes. (Note:
Marker pen is only available in red color).
Page 78
4.7. Private Safe
Start Using Private Safe
1. Please set the Privacy passcode first before using this application. Go to
[Settings] > [Fingerprint, Face, & Passcode] > [Lockscreen passcode] and enter
your desired encryption method. You can also click SET PASSCODE and enter your
desired encryption method. You will also be asked for a security question as an
added layer of security for your privacy.
2. Manage files on Private Safe: Go to [Settings] > [Security] enter the passcode
that you have set, and then manage files that you want to be kept private.
FIles that can be added in Private safe are Photos, Audio, Documents, and
other Files that are supported by the app.
You can also create a shortcut on your home screen for easy access.
Page 79
4.8. Screen Clock
If you want to know what time it is or if someone has called you or messaged you
without opening or waking up the screen, Screen Clock is an amazing function that
can assist you. This will display the time and reminders like missed calls, unread
SMS, unread Wechat, and QQ messages even when the screen is off.
To Enable Screen Clock:
1. Go to [Settings] > [Display & Brightness] > [Screen Clock] and switch Screen
Clock to green to enable.
Page 80
2. Then scroll the wheel to set how long you will be using the Screen Clock.
Note: if battery level is below 10% with no power supply connected.
4.9. Find My Device
If for some reason you left, lost and forgotten your phone or was stolen, Google
Find My Device will help you locate your device remotely. In order for it to work,
you need to sign in your Google account and turn on Location Service on your
phone.
Activate and use Find my Device.
There are three ways you can do this on your phone.
1. Go to [Settings] > [Security] > and click Find My Device. Switch the slider to
blue.
Page 81
2. Go to [Settings] > [Additional Settings] > [Device and Privacy] and click Find
My Device. Switch the slider to blue.
3. Go to [Settings] > [Google] > [Security] and click Find My Device. Switch the
slider to blue.
Page 82
Note: You can choose from any the options above to activate Find My Device.
On the Find My Device page, it will show you ways on how to locate the phone
using any android devices.
Click Find My Device to download or open the app
Click Web to direct you to android.com/find
Click Google
Page 83
4.10. Google Assistant
Google knows everything and it will give answer that will amaze and at the same
your voice and waits for your inquir
location. You can also ask certain tasks like set an alarm, make a phone call, check
emails, open the settings on the phone, play a YouTube video, sing a song or read
a poem, and a whole lot more. Google Assistant has one nice voice too. You need
to activate Google Assistant first to take advantage of this function.
Page 84
Enable Google Assistant:
1. Open the Control Center. You can open Control Center from anywhere on your
phonefrom any app or screen, even from the lock screen. Then Press to open
Google Now. You can also quick launch your Google Assistant by long pressing
the Home button.
2. Click Sign in then input your Gmail account.
3. Click Get Started to teach the Assistant to recognize your voice.
Just toggle to blue to enable, then click Next to start using the app.
(Note: a similar voice or recording of your voice can unlock your device)
ctly.
Page 85
Icons
Click this when you would rather type questions to your Assistant.
Page 86
Active mode. Meaning, currently you or the Assistant is saying something.
Inactive mode or idle. Meaning, no one is saying something.
Google Assistant Settings:
Launch Google Assistant from the Control Center or from long pressing
the Home button. Click on the top
right corner of the screen and click Settings. You can also ask the Assistant to give it
to you. Now you can personalize and customize your Assistant. These are the
settings:
Account
Gmail Address it will show your activities with Google Assistant to any Android
to sign in.
Personal info contains home & work locations for a better route when
commuting, nickname that you prefer your assistant to call you, and an option to
enable email updates to receive latest news and features to your Assistant.
Preference contains weather temperature units, change the default voice of the
Assistant with other 8 selections, getting around which asks how you usually
commute, and Summer time mode.
Page 87
Payments This is where you can set up payment methods and address. (Note: Not
available to all countries).
Voice Match Link multiple users to a single Google Home device and share it
with family and friends. Up to 6 people can use this on a single Google Home.
Devices
Phone -free settings, Assistant
language, preferred input, screen context, notifications, etc.
Services
Music you can choose either YouTube or a default music player.
Home Control you can add devices like Google home, phones, watches, and
even connect your smart home devices (the present list of compatible brands are
basement lights.
News Your Assistant will play news from the sources that are listed. Just say,
Routines just say one command and your Assistant will do multiple things.
reminder, & and then play music. And you can always customize according to your
preference.
Shopping list
you go to a grocery.
Shortcuts let you create faster and easier ways to do your favorite things. Like
means Assistant should play workout music. Or when
year. This can all be customized.
Videos and Photos Play shows and movies or see your photos on TV by asking
your As-in TV for your
photos).
4.11. New features of Camera
New features for taking photos and selfies.
Take a portrait photo. Choose Portrait. Pan for the lightning choices that
are available. You can choose from natural, rim, face, bi-color,canvas, and local
light.
Page 88
4.12. Transfer data from old phone
to new OPPO smartphone
You can transfer over all of your data - with no risk or loss of quality, using Clone
Phone. With Clone Phone, you don't need to leave any of your data behind with
your previous device. Take it all with you in three easy steps:
From an iPhone to an OPPO Phone
1. On your OPPO Phone, go to [Tools] > [Clone Phone], then select "This is the
new phone" and "Import From an iPhone". Connect your phone to the Internet
when promoted.
Page 89
2. Sign in the iCloud account of your old iPhone. Enter the Apple ID verification
code you received on your iPhone or in the SMS and start computing cloud data.
From an Android Phone to an OPPO Phone
1. On your OPPO phone, go to [Tools] > [Clone Phone], then select "This is the
new phone" and "Import from an Android Phone".
2. On your old phone, click [Clone Phone] from the Home screen, select "This is
the old phone" and scan the QR Code generated by the new phone to start
cloning.
Page 90
You can also select the data (Personal Data, System Data, Applications, Storage
Data) to be cloned by clicking"Manually Select the Data to be Cloned."
3. Enter the lock screen password to continue.
If the QR code cannot be scanned.
If scanning QR
Connect
that a popfind the Hotspot name on the Wi-Fi setting and enter the password then you can
start transferring files.
Page 91
If old phone doesn't have a Clone phone.
1. Click You can tap to install> and it will direct you to a web browser or open a
browser from your phone and go to the
website: i.clonephone.coloros.com/download. (Note: this only works when you
open it using your mobile phone. This will not open on your computer).
2. Once you have entered the link above, it will prompt you to download the Clone
Phone downloader APK file under the Download folder. You may change the folder
path if you wish just click "Change the directory" then Click "Save".
Page 92
3. Once download is done. On your home screen, go to the notification panel for
the downloaded file or go to Files/File Manager and click
folder you chose to save the file.
Install
transfer files.
and you can now start to
Page 93
Note: The duration of the Clone Phone process depends on how big the data you
are going to transfer. Please patiently wait before it is completely transferred.
4.13. OPPO ID
An added feature on your setting page is your OPPO ID which can be used to
access apps such as OPPO Cloud, App Store, and Theme store.
How to register as a new user
To register your email address, go to [Settings] > [Sign in to your OPPO ID],
click Register. You will be asked to register using your email address or using your
mobile number, then click Next.
Page 94
A
form of a captcha, Just type the characters, then a verification code will be sent to
click Next.
60 seconds is done, click resend to get a new one.
passcode and then click Get Started.
Page 95
OPPO Cloud
OPPO Cloud] to green and click Continue.
Turn On
OPPO ID Credentials
You can input your personal information as well as photo for your OPPO ID.
Page 96
To put a photo, click then click either Select Photo or Take Photo to add an
image.
To manage Name, Birthday, and Address click [My Info] then click each
information you would want to input.
Nickname input the nickname that you would like to show on your OPPO ID.
Your nickname will be displayed when you post comments or threads in Game
Page 97
Center, OPPO AppStore, or other apps. Click Save
nickname.
Name You can input your given name and family name. This won't be visible to
other users so
Click Save once done.
Gender You can set your gender or just cancel it. Gender will be invisible to
others. It's only you can see it.
Page 98
Birthday You can set your birthday or just cancel it. Birthday will be invisible to
others. It's only you can see it.
To manage Account, Passcode, and Contact click [Sign-In & Security] then click
each information you would want to add. For security purposes, each action at this
stage will require verification from either the email address or mobile number that
Page 99
Mobile Number The phone number that you will input can also be used to log in
OPPO ID, reset passcode, and verify your identity. Choose the country of the SIM
that you are using, input the phone number, click Send, and then wait for the
verification code to arrive on your phone. Input the verification code then
click Bind.
Email address You may change email address from here or add one when you
have used Mobile Number to register on OPPO ID. Wait for the verification code to
arrive on your email address. Input the verification code then click Bind.
Page 100
Emergency contact Once emergency contact will be added, it will be used as
one of the verifications whenever you reset your phone or sign in to Find My Phone
as a security measure. Just input the names and mobile numbers or email
addresses, follow the security question, verify the contact number by sending the
verification code, then click Next.
Password Management You can either Change Passcode using the current
password to verify and change or you can Reset Passcode using the phone/email
verification codes.
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.