equipment. Obey the relevant rules and regulations.
Switching off at Blasting Areas
To avoid interfering with blasting operations, turn off your phone when in a
Page 8
“blasting area” or in areas posted “Turn off two-way radio.” Obey all signs and
instructions.
Radiation
Nearly every electronic device gives off radiation. Mobile phone use does not
increase the risk of getting brain cancer or other head tumors. Its effect in
humans is negligible.
Interference
Nearly every electronic device is susceptible to interference for external
sources if inadequately shielded or designed. As a result, your phone may
cause interference with other devices.
Temperature
Operate your phone in a place where the temperature is always between 10℃
to 45℃.Using or storing your phone in a too hot or too cold environment
might damage the battery, or even cause your phone to short-circuit or burn.
Proper Usage
Page 9
Use your phone appropriately. Do not touch the antenna area unnecessarily
when the phone is turned on. Do not drop, disassemble, crush, bend, deform,
puncture, incinerate, or insert foreign objects into your phone.
Qualified Maintenance and Service
Never attempt to repair or modify the phone yourself. If your phone has any
hardware or software failure, do not use it until you take it to an authorized
service provider. Do not disassemble or root your phone yourself, otherwise
the warranty service will be terminated immediately.
Batteries, Chargers and other Accessories
Do not dismantle the built-in lithium-ion battery of your device. Use only the
batteries, chargers and other accessories authorized by OPPO, for third-party
accessories might cause damage or danger.
Waterproofness
Your device is not waterproof. Do not use your device in rain, or other wet
locations.
Avoiding Hearing Damage
Permanent hearing loss may occur if the receiver, speakerphone, headphones,
or earpieces are used at high volume. You can adapt over time to a higher
Page 10
volume of sound that may sound normal but can be damaging to your
hearing. Set the volume to a safe level to protect your hearing.
Avoiding Eyestrain
Your device’s screen color and brightness might have a different degree of
stimulation to your eyesight. Long-term viewing of your phone in normal or
darker environments will damage your eyesight. When watching video or
reading text on your phone, avoid prolonged use, take breaks and turn on
eye protection mode to prevent eyestrain.
Glass Parts
The outside cover of your phone’s screen, front/rear camera and flash is made
of glass. This glass could break if your phone is dropped on a hard surface or
receives a substantial impact. Do not attempt to touch or clean the broken
glass. Stop using your phone until the glass is replaced by an authorized
service provider.
Connecting to Other Devices
Before connecting to other devices, carefully read the user manual for more
detailed, accurate and safety instructions. Do not connect to incompatible
products.
Being Aware of Laser Safety
Page 11
If your phone supports laser focusing, carefully read this user manual before
3.Get started
●Give you a larger view. A limitless screen design gives you a beautiful
using it. Failure to follow the instructions might lead to harmful radiation
exposure. To prevent direct exposure to laser beam, do not attempt to open
your phone’s outer shell, or keep close contact with laser light.
3.1. Quick look
3.1.1. ColorOS 3.2 Features
ColorOS 3.2 is designed to make OPPO smartphones more convenient, fluid
and intelligent for every user. It is jam-packed with thoughtful and
easy-to-use functions such as facial recognition, game acceleration, power
saving mode, eye protection mode, kid space, and more. These make
ColorOS 3.2 a close assistant beyond a system.
Better visual experience
visual effect. It could have content extended to the edges of the screen,
and let you see a larger world. ColorOS 3.2 devices have their fingerprint
sensor relocated to the rear to make the screen to body ratio more than
80 percent.
Page 12
●Virtual navigation keys. ColorOS 3.2 replaces the physical Home Button
with fast and fluid gestures, also offers you virtual navigation keys to
operate your phone. The virtual keys follow the typical order for OPPO -
recent apps, home, and return from left to right. If you are left-handed,
you can also switch their order yourself. The system also set multiple
colors for the navigation background to match the color scheme of the
popular apps. See Navigation keys.
Page 13
Facial Recognition
Models
R11s / R11s Plus
F5 / F5 Youth
A83
A major highlight of the new features is the Facial Recognition which can
identify up to 128 facial recognition spots while clicking selfies. With Facial
Recognition, you just need to pick up and wake your phone, then it unlocks
the instant you look at it, quickened to 0.08s. It does a great help if you’ve
had trouble with your fingerprints over time. See Face ID.
3.1.2. ColorOS 3.2 Applicable products and
specifications
Page 14
Appearance
R11s / R11s Plus
Black
Champagne
Red (Limited / R11s only
)
F5 / F5 Youth
Gold
Red (F5 only)
Black
A83
Champagne
Black
Page 15
Height
155.1mm (R11s)
164.8mm (R11s Plus)
Height
156.5mm
Width
75.5mm (R11s)
80.2mm (R11s Plus)
Width
76mm
Thickness
7.1mm (R11s)
7.3mm (R11s Plus)
Thickness
7.5mm
Weight
153g (R11s)
182g (R11s Plus)
Weight
152g
Operating System
ColorOS 3.2, based on Android 7.1
Operating System
ColorOS 3.2, based on Android 7.1
Page 16
GPU
Adreno 512
GPU
ARM Mali G71 MP2 770MHz
RAM
4GB (R11s)
6GB (R11s Plus)
RAM
4GB (F5)
6GB (F5)
3GB (F5 Youth)
Storage
64GB (Expandable up to 256GB)
Storage
32GB (Expandable up to 256GB) (F5 4GB / F5
Youth)
64GB (Expandable up to 256GB) (F5 6GB)
Battery
3205mAh (R11s)
4000mAh (R11s Plus)
Battery
3200mAh
Processor
Qualcomm SDM660
Processor
Octa-core MT6763T (F5)
MT6763T (F5 Youth)
Page 17
Size
6.01 inches (R11s)
6.43 inches (R11s Plus)
Size
6.0 inches
Size
6.0inches
Type
AMOLED
Type
LTPS TFT
Type
TFT
Resolution
FHD+(2160 by 1080 pixels)
Resolution
FHD+(2160 by 1080 pixels)
Resolution
Colors
16 million colors
Colors
16 million colors
Colors
16million
colors
Touchscreen
Multi-touch, Capacitive Screen
Touchscreen
Multi-touch, Capacitive Screen
Touchscreen
Multi-touch,
Capacitive
Screen
Page 18
Rear Sensor
20-megapixel,16-megapixel
Rear Sensor
16-megapixel (F5)
13-megapixel (F5 Youth)
Front Sensor
20-megapixel
Front Sensor
20-megapixel (F5)
16-megapixel (F5 Youth)
Flash
LED Flash
Flash
LED Flash
Aperture
Rear: f/1.7
Front: f/2.0
Aperture
Rear: f/1.8 (F5)
Rear: f/2.2 (F5 Youth)
Front: f/2.0
Frequencies
GSM: 850/900/1800/1900MHz
WCDMA:
850/900/1700/1900/2100MHz
FDD-LTE:
Frequencies
FDD: B1/2/3/5/7/8/20/28
TDD: B38/39/40/41
WCDMA: B1/2/5/8
GSM: 850/900/1800/1900
Frequencies
FDD: B1/3/5/8
TDD: B38/40/41
WCDMA: B1/5/8
GSM: 850/900/1800/1900
Page 19
Bands 1/2/3/4/5/7/8/20/28
TD-LTE:
Bands 38/39/40/41(2535-2655)
SIM Card Type
Dual Nano-SIM Cards
SIM Card Type
Dual Nano SIM Cards & Micro SD
Card (Total 3 slots)
SIM Card Type
Dual Nano SIMCards&Micro
SD Card (Total3slots)
GPS
Supported
GPS
Supported
GPS
Supported
Bluetooth
4.2
Bluetooth
4.2
Bluetooth
4.2
Wi-Fi
2.4/5GHz 802.11 a/b/g/n/ac
Wi-Fi
2.4/5GHz 802.11 a/b/g/n
Wi-Fi
2.4/5GHz 802.11a/b/g/n
OTG
Supported
OTG
Supported
OTG
Supported
NFC
No
NFC
No
NFC
No
Page 20
Proximity Sensor
Light sensor
G-sensor
E-compass
Gyro Sensor
Distance sensor (F5)
Proximity Sensor (F5 Youth)
Light sensor
G-sensor
E-compass
In the Box
OPPO R11s / R11s Plus
Earphones
Micro USB cable
Charger
SIM ejector tool
Documentation
Case
OPPO F5 / F5 Youth
Earphones
Micro USB cable
Charger
SIM ejector tool
Documentation
Case
OPPO A83
Earphones
MicroUSB
cable
Charger
SIMejector
tool
Documentatio
n
Page 21
Case
A.
Front camera
B.
Receiver
3.1.3.Buttons and components
F5 features
Page 22
C.
Sleep/Wake button
D.
Volume up button
E.
Volume down button
F.
Rear camera
G.
Flash
H.
SIM card tray
I.
SIM tray hole
J.
Noise cancelling microphone
K.
Speaker
L.
Micro-USB port
M.
Microphone
N.
Headset jack
Control Center
Swipe up from the bottom edge of the screen to open control center, which
Page 23
gives you easy access to Wi-Fi, Mobile data, Bluetooth, GPS, OPPO Share,
Nightly Shield, Flashlight, Calculator, Clock and camera. You can also use it to
adjust the brightness, boost your phone, disable Bottom keys and go to
settings. If you want to change or rearrange the shortcuts, or add other
shortcuts, swipe right and click “More”.
Notification center
Swipe down from the top edge of the screen to open notification center,
which brings all your information into one location, and allows you to
manage all the alerts from different apps. Press a notification to respond to it,
or swipe a notification left for settings or deleting it.
Page 24
3.1.4 Sleep/Wake button
The Wake/Sleep button on the right side of your phone has a number of different
uses.
When R11 is on
Page 25
Wake or lock the screen: With the phone powered on, press the Wake/Sleep button
once will wake the phone up to the point that you can see the lock screen, like the
clock and any notifications that are setup to display there.
When the phone screen is wakened, press this button will blacken the screen and lock
the phone.
Take a screenshot: Press and hold the Sleep/Wake and Volume Down buttons at the
same time, your phone will take a picture of whatever was displayed on the screen.
The image is saved in the Photos app.
Take a long screenshot: Press and hold the Sleep/Wake and Volume Up buttons at
the same time, your phone will capture a long screenshot.
End a call: Go to [Settings] > [Additional Settings] > [Accessibility] and turn on
[Power Button Ends Call], then you can press the Sleep/Wake button to end phone
calls.
Turn off the phone: Press and hold the Sleep/Wake button for a few seconds,
whether the phone is on the lock screen or home screen, it will ask you to slide down
to power off the device.
Force restart the phone: Press and hold the Sleep/Wake and Volume Up buttons for
at least 5 seconds until your device is turned on to force restart your phone.
When R11 is off
Turn on the phone: Press and hold the Sleep/Wake button for a few seconds, and the
phone will turn on.
Force restart the phone: Press and hold the Sleep/Wake and Volume Up buttons
until your device is turned on to force restart your phone.
Enter Recovery Mode: Press and hold the Sleep/Wake and Volume Down buttons at
the same time to enter Recovery Mode.
3.1.5.Menu, Home and Return buttons
ColorOS 3.2 replaces the traditional hardware buttons with on-screen virtual
navigation keys, also offers you fast and fluid
phone. You can change the order of the virtual keys, and set them to appear
only when needed to free space on the screen.
gestures
to operate your
Page 26
Enable virtual navigation keys. Virtual navigation keys are default on. If you
want to enable them manually, go to [Settings] > [Additional
Settings] > [Navigation Keys] and click Virtual Navigation Keys.
Page 27
Page 28
Change the order of virtual navigation keys. The keys follow the typical
order for OPPO: Menu, Home, and Return from left to right. If you are
left-handed, you can change them to the return-home-recent order.
Page 29
Hide the virtual navigation keys. When you launch a full-screen app, the
When in portrait mode, swipe up from the bottom.
When in landscape mode, swipe from the bottom to the left.
keys will automatically hide, and can be brought back with a simple swipe:
Page 30
Page 31
Manually hide the virtual navigation keys. To set the keys to appear only
when needed, go to [Settings] >[Additional Settings] > [Navigation
Keys] and enable Virtual Navigation Keys Can Be Hidden. Then you can
clickon the left-lower corner of the screen to hide the keys, and swipe
from the bottom to reveal them.
Page 32
Immersive navigation background. The system set multiple colors for the
navigation background to match the color scheme of the popular apps. The
background color is default white, and it will become translucent or
immersive when you open some of the third-party apps.
Page 33
Page 34
3.1.6.Volume buttons
Volume buttons give you easy access to adapt over time to a proper volume of sound.
It refers not simply ringer or media, F5 also keeps track of the volume level separately
in headphone, microphone and speaker.
Page 35
Media volume: When listening to music, videos and phone calls, use the buttons on
the side of the phone to adjust the volume. For information about avoiding hearing
loss, see Security Information.
Ringer volume: You can also use the volume buttons to control the volume for the
ringer and alerts. When you press and hold the volume down button, your phone will
switch to silent mode.
Call volume: When making or receiving phone calls, use the volume buttons to adjust
the volume of the call.
* You can also adjust the volume (except call volume) in [Settings] > [Sound & Vibration].+
Page 36
Controlling the camera: Volume buttons can also be used to control your camera. Go
to [Settings] > [Camera] > [Volume Button] and set up the volume buttons for
Shutter or Zoom.
3.1.7. Micro-USB port
R11's Micro-USB port is the connector on the bottom of your device where your
battery charger connects. It also doubles as the data port, which lets you transfer data
to and from a personal computer. Plug the cable in the port to charge or transfer data.
Notice:
Page 37
1. Repeated connecting and disconnecting of your cable can cause the port to wear out,
resulting in a poor connection to your cable.
2. Never force a connector into the port, for that might cause damage.
3.1.8. Headset jack
The headset jack is an audio socket that accepts a 3.5mm audio plug. Plug
your headset in the jack to listen to music, videos and phone calls. Do not
force a mismatched headset into the jack for that might cause damage.
3.1.9. SIM and SD cards
SIM card
* Insert the SIM card before turning on your phone. If you hold a new SIM card, you
might need to wait until it is activated by the carrier before you can use it.
A SIM card is provided by your carrier and is used to activate your phone's
mobile network. Because it has a small amount of memory, the SIM card not
only enables communications between two persons, but stores information
Page 38
such as phone numbers, security data and more. When using the mobile
network, you need to pay charges. To avoid high charges, you can shop data
plans with your carrier, or shop international data roaming plans when
traveling abroad.
Insert the SIM card: Most OPPO Smartphones support Dual SIM. You can
choose to insert one or two.
1. Insert the card needle into the hole outside the card tray to pop it open.
2. Pull out the card tray and place SIM card(s) on it.
3. Put the card tray back in as the same orientation that you removed it.
Remove the SIM card: Remove the card(s) in the same way that you insert
it(them).
Page 39
SD card
The SD card is a way to store and transfer images, music, video and other
data. You can insert a SD card in your phone to expand phone’s memory.
SIM1, SIM2 and SD cards share the same card tray. Insert your SD card in the
same way that you insert the SIM card(s).
3.1.10. Accessories came with OPPO phone
Along with the handset, the accessories came with are headset, USB
Connecting cable, Power adapter, SIM card tool and Phone case.
Notice:All photos shown are for illustration purpose ONLY. Actual products
may vary due to product enhancement.
Headset: A standard headset with 3.5 mm headset plug. Use to listen to
music, videos, and phone calls. Use the built-in microphone to talk. When
playing the music or videos, click the button once to pause or play a song or
video.
Page 40
USB Connecting cable: Use the cable to connect your phone to the
computer to charge and transfer files, or use it with the power adapter to
charge.
Power adapter: Connect the power adapter to your phone using the
included cable, then plug it into a standard power outlet to charge the
phone.
SIM card tool: Use to pop out the SIM card tray.
Page 41
Phone Case: Use to protect against drops and shock damage on the corners
and rear of your phone.
3.1.11. Charge the battery
How to charge the battery:
Page 42
Notice:All photos shown are for illustration purpose ONLY. Actual products
may vary due to product enhancement.
Charge with the jack: Connect adapter to your phone using the USB cable,
then plug it into a standard power outlet to charge the phone.
Connect to a computer to charge: Use the cable to connect your phone to
the computer to charge. Your phone will charge slowly if you connect it to
the computer.
Charge with Power Bank: Connect Power Bank to your phone, and your
phone will be charged wherever you go. It is an absolute necessity if you are
a frequent traveler.
Charging Notice:
1. Charge the phone with the original charging accessories (including adapter,
cable and power bank).
2. Charge your phone in a place where the temperature is always between
15 C to 40 C. Extreme ambient temperatures will affect flash charging
system.
Page 43
3.1.12. Gesture & Motion
Gestures
OPPO smartphone is designed to understand gestures. You can use gestures
such as tap, swipe, drag and spread to operate your phone.
To set up complex gestures for specific functions, go to [Settings] >
[Gesture & Motion].
Page 44
Screen-off Gestures
To set up screen-off gestures, you need to turn it on first.
Double tap fingerprint button for screen-on: Turn it on to wake up your
locked screen with a double-click on the Home button. This function is only
effective when the fingerprint sensor is turned off.
Double tap to turn screen on: Turn it on to wake up your locked screen with
a double-click on the screen.
Draw O to start camera: When turn it on, you can draw O on the locked
screen to open Camera app.
Draw V to open torchlight: When turn it on, you can draw V on the locked
screen to open the torchlight.
Music control: When turn it on, you can draw ‖ to pause/play a track, or
draw < or > to switch the track when the screen is off.
Add more screen-off gestures: OPPO smartphone of ColorOS 3.1 gives you
7 options, which are Draw ^, Slide up, Slide down, Slide left, Slide right,
Draw M and Draw W. Choose one to unlock the phone, call someone or start
an app.
Page 45
Screenshot Gesture
When turn it on, you can take a screenshot by swiping the screen up or down
with three fingers.
Page 46
Motion
The motion-sensing technology is used in OPPO smartphone. Use it to let
your phone response to motion.
Smart call
Auto call when near the ear: Before you can use auto call, you need to set
the default SIM card for calling. Go to a contact detail, call detail, message
conversation or info interface, put the phone near your ear and your phone
will automatically call that specific person.
Auto answer when near the ear: This function lets your phone to answer any
incoming calls automatically when putting the phone near your ear.
Switch to receiver for calls: Use it to automatically switch from speaker to
receiver when you put the phone near your ear during phone calls.
Flip to mute incoming calls: Use it to silence the ringer by turning the phone
over on a table or other flat surfaces.
Page 47
Touch-disable mode
Turn it on to prevent incorrect operations if the lock screen is covered.
+
Take selfies
Open Camera app and switch to the front camera. Click> Palm on the top
of the screen. Pose the same hand gesture towards the camera, once the
camera captures that, it will take a photo automatically after two seconds.
You can change your pose and expression within this two seconds.
Page 48
3.1.13.Key combinations
Generally, you can use two buttons of your phone to generate a specific
result. The common key combinations include:
When phone is on
Press and hold the Power and Volume Down buttons: Your phone will take
a screenshot for the current page.
Press and hold the Power and Volume Up buttons:
Page 49
1. Capture long screenshots: About 2 seconds, your phone will be ready to
capture a long screenshot. Click [Page-down] to scroll to the next page,
continue to click Page-down until you want to stop capturing, then click
[Save] to generate a long screenshot.
2. Force restart your phone: Press and hold the two buttons for at least 8
seconds until your smartphone is restarted.
Press and hold the Volume Up and Down buttons: Quit Talkback app
temporarily.
Page 50
When phone is off
Press and hold the Power and Volume Down buttons: Phone will enter
Recovery Mode, which does help to update the system, wipe data, check disk
and more.
Page 51
Press and hold the Power and Volume Up buttons: Phone will be force
Status icon
What it means
Mobile network signal
Shows whether you’re in range of operator’s
network and can make and receive calls. The
restarted. Press and hold the two buttons until your phone is turned on.
3.1.14. Status Icons
The icons in the status bar at the top of the screen give information about
your OPPO smartphone:
Page 52
more bars, the stronger the signal.
Airplane Mode
Shows that airplane mode is on. Phone’s
wirelesscommunicationabilitiesare
disabled.
/
LTE/ LTE – A
4G network is available, including LTE and
LTE-A. Your phone can connect to the
Internet over that network.
/
UMTS/WCDMA
3G UMTS network is available. Your phone
can connectto theInternet overthat
network.
EDGE /GSM
EDGE (GSM) networkis available. Your
phone can connect to the Internet over that
network.
Wi-Fi
Shows that your phone is connected to a
Wi-Fi network. The more bars, the stronger
the signal. See Connect to Wi-Fi.
Call Forwarding
Call forwarding is turned on.
VPN
You’re connected to a network using VPN.
Quiet Time
Quiet Time is turned on.
Page 53
Portrait orientation lock
Phonescreenislockedinportrait
orientation.
Alarm
An alarm is set up on your phone.
Bluetooth
Bluetooth is on, or your phone is connected
to a Bluetooth device.
Bluetooth
Bluetooth Tethering is on.
Silent
Silent Mode is on.
HD Voice
Your operator’s VoLTE service is available.
HD Voice works to make your calls.
USB Debugging
USB Debugging is on. You can transfer files
via USB.
Wireless Display
Wireless projector is connected.
Location Service
Location Service is on.
No service
Your phone has no signal.
Power Saving
Power Saving Mode is on.
Page 54
3.2. Configure settings
3.2.1. Google account
A Google account is the key to accessing all of Google’s products and
services, such as Maps, Play Store, Voice Search, YouTube, and more. To sign
in your Google account and get the most out of Google, do the following:
Create and sign in your Google account. The first time you switch your
OPPO phone on, it will prompt you to sign in to Google. You can also create
or sign in your account in [Settings] > [Google] > [Sign-in & security], or in
any of the Google apps on your phone.
Page 55
Note: Your Google Account is hooked up with all the Google Services you
use. After you login to a Google app, other Google apps on your phone will
automatically login to the same account.
View apps with access to your account. Go to [Settings] > [Google] >
[Sign-in & security], scroll down and click Apps with access to your
account. If there’s an app or service that shouldn’t have access to your
account, you can revoke its privileges.
Sync the Google account. If you have your Google account configured, go to
[Settings] > [Accounts and Sync], click Google and you will see the sync
options. You can choose which parts of the service you would like to be
synced, then click Sync now to start syncing.
Page 56
Remove your Google account. Go to [Settings] > [Accounts and Sync],
click Google, then click Remove acct.
3.2.2. Fingerprint, Face and Passcode
Setting a passcode and fingerprint on your OPPO phone are security
measures that all users should take. Follow these steps to set a passcode and
fingerprint that will be needed to unlock your phone and access the
information stored on it.
Use a passcode on your OPPO phone
Set the passcode
1. Go to [Settings] > [Fingerprint & Passcode], click [Turn on Passcode].
Page 57
2. You'll be prompted to draw a pattern. If you want to use other passcode
Click Custom Alphanumeric Code to use a passcode that contains
Click 4-Digit Numeric Code to use a numbers-only passcode that
types, see step 3.
3. Click [Other Encryptions]. You can choose from two types of passcodes:
numbers and/or letters as your preference.
contains four characters.
Page 58
4. Draw your pattern or enter your passcode.
5. Re-draw or re-enter your pattern or passcode to confirm it and activate it.
Change the passcode
1. Go to [Settings] > [Fingerprint & Passcode], click [Modify Passcode].
2. Draw or enter your current pattern or passcode.
3. Draw or enter your new pattern or passcode. If you want to use other
passcode types, click [Other Encryptions] at the bottom of the screen.
4. Re-draw or re-enter your pattern or passcode to confirm it and activate it.
Page 59
Turn off the passcode
Unlocking the phone from the lock screen.
Making purchases without entering a passcode.
Encrypting apps
Protecting files
1. Go to [Settings] > [Fingerprint & Passcode], click [Turn off Passcode].
2. Draw or enter your current pattern or passcode to confirm.
View more details in Set and use a passcode with your OPPO smartphone.
Use a fingerprint on your OPPO phone
Before you can add a fingerprint, you need to create a passcode for your
OPPO phone. You can use fingerprints for:
Add a fingerprint
1. Go to [Settings] > [Fingerprint & Passcode], click [Add a Fingerprint].
2. Follow the on-screen instructions, placing your finger gently on the Home
button until your fingerprint is recorded.
Page 60
3. Repeat step 1 and 2 for as many fingers as you like.
Delete or Rename a fingerprint
1. Go to [Settings] > [Fingerprint & Passcode], click the fingerprint you’ve
added.
2. Enter a name for your fingerprint, or click [Delete Fingerprint].
Page 61
Use fingerprint to reset passcode
1. Restart your phone-enter 5 times the wrong passcode or pattern
Prerequisite: The user must have entered the fingerprint and enabled the
fingerprint unlock
Reset Passcode methods:
code-wait for 30s-click the "Use Fingerprint to Reset passcode"-verify
fingerprint-reset passcode.
Page 62
2. Without restarting the phone, follow the following operation to reset:
[Settings] > [Fingerprint, Face and Passcode] - Enter the wrong
passcode 5 times - Wait 30s - click on the bottom of the screen to enter
the "Reset Passcode" - verify fingerprint - Reset passcode.
Page 63
+
Unlocking the phone from the lock screen.
Encrypting apps
Protecting files
1. Go to [Settings] > [Fingerprint,Face & Passcode], click [Enroll Face].
Enroll a Face on your OPPO phone
Before you can add a fingerprint, you need to create a passcode for your
OPPO phone. You can use fingerprints for:
Enroll a face
Page 64
2. Follow the on-screen instructions. To get the ideal effect,keep the phone
20-50cm away from your face make your whole face in the circle until the
enrollment is done and avoid very bright or dim environment when
enrolling your face.
+
Delete Enrolled Faces
1. Go to [Settings] > [Fingerprint,Face & Passcode], click [Delete Enrolled
Faces].
Use Face to
1. Go to [Settings] > [Fingerprint,Face & Passcode], click [Use Face to]
then you can choose to use your Face ID to Unlocking,App Lock,File Safe
these function on or off.
Page 65
View more details in Add and use a fingerprint on your OPPO Smartphone.
3.2.3. Set up other mail and calendar accounts
In addition to the apps that come with your phone, if you want to use other
mail and calendar apps, add the accounts to your phone to let the apps
associated with those accounts sync with your phone.
Set up an account. Go to [Settings] > [Accounts and Sync], then click [Add
Account].
Repeat the steps for as many accounts as you like.
3.2.4. Transfer data with Clone Phone
Clone Phone can safely and rapidly transfer all the data including Personal
Page 66
Data
To support the whole backup process to complete, make sure the battery level
Progress and details will be displayed on your phone during the cloning
Your phone might get hot during the process as the processor is overloaded,
Keep your device close to the other to ensure the network connection between
(Contacts, Messages, etc.), System Data (System Settings, Clock, Weather Info,
etc.),
Applications (Applications and Application Data) and Files like Audios,
Videos,
Photos and Documents.
Before Clone Phone
of
OPPO smartphone is over 50% and don’t turn off or restart your phone during
the
backup process.
process.
which
generates heat.
two
Devices.
Page 67
How to Clone Phone
1. On your new phone, go to [Tools] > [Backup and Restore] > [Clone
2. On you old phone, go to [Clone Phone] and select “This is the old phone”
Follow these steps to transfer your data from the old phone to the new
phone
easily and quickly:
From an Android Phone to an OPPO
Before Clone phone, you have to make sure Clone Phone is available on both