equipment. Obey the relevant rules and regulations.
Switching off at Blasting Areas
To avoid interfering with blasting operations, turn off your phone when in a
“blasting area” or in areas posted “Turn off two-way radio.” Obey all signs and
instructions.
Radiation
Nearly every electronic device gives off radiation. Mobile phone use does not
increase the risk of getting brain cancer or other head tumors. Its effect in
humans is negligible.
Interference
Nearly every electronic device is susceptible to interference for external
sources if inadequately shielded or designed. As a result, your phone may
Page 8
cause interference with other devices.
Temperature
Operate your phone in a place where the temperature is always between 10℃
to 45℃.Using or storing your phone in a too hot or too cold environment
might damage the battery, or even cause your phone to short-circuit or burn.
Proper Usage
Use your phone appropriately. Do not touch the antenna area unnecessarily
when the phone is turned on. Do not drop, disassemble, crush, bend, deform,
puncture, incinerate, or insert foreign objects into your phone.
Qualified Maintenance and Service
Never attempt to repair or modify the phone yourself. If your phone has any
hardware or software failure, do not use it until you take it to an authorized
service provider. Do not disassemble or root your phone yourself, otherwise
the warranty service will be terminated immediately.
Batteries, Chargers and other Accessories
Page 9
Do not dismantle the built-in lithium-ion battery of your device. Use only the
batteries, chargers and other accessories authorized by OPPO, for third-party
accessories might cause damage or danger.
Waterproofness
Your device is not waterproof. Do not use your device in rain, or other wet
locations.
Avoiding Hearing Damage
Permanent hearing loss may occur if the receiver, speakerphone, headphones,
or earpieces are used at high volume. You can adapt over time to a higher
volume of sound that may sound normal but can be damaging to your
hearing. Set the volume to a safe level to protect your hearing.
Avoiding Eyestrain
Your device’s screen color and brightness might have a different degree of
stimulation to your eyesight. Long-term viewing of your phone in normal or
darker environments will damage your eyesight. When watching video or
reading text on your phone, avoid prolonged use, take breaks and turn on
eye protection mode to prevent eyestrain.
Glass Parts
Page 10
The outside cover of your phone’s screen, front/rear camera and flash is made
of glass. This glass could break if your phone is dropped on a hard surface or
receives a substantial impact. Do not attempt to touch or clean the broken
glass. Stop using your phone until the glass is replaced by an authorized
service provider.
Connecting to Other Devices
Before connecting to other devices, carefully read the user manual for more
detailed, accurate and safety instructions. Do not connect to incompatible
products.
Being Aware of Laser Safety
If your phone supports laser focusing, carefully read this user manual before
using it. Failure to follow the instructions might lead to harmful radiation
exposure. To prevent direct exposure to laser beam, do not attempt to open
your phone’s outer shell, or keep close contact with laser light.
3.Get started
3.1. Quick look
Page 11
3.1.1. ColorOS 3.1 Features
ColorOS 3.1 brings OPPO phones to another level with ultra-fast operating
speed, beautiful and easy-to-use design and innovative security features. It is
more a close assistant than a system. Once you have experience ColorOS 3.1,
you will realize how powerful and intimate it is.
Faster than ever.
The performance is so smooth and responsive that you won’t even notice it.
Whether you’re launching apps, moving from app to app, surfing the web,
processing data or loading the biggest games, you’ll feel incredibly fluid.
At any time, sharing is in a flash.
OPPO provides you a real-time data transmission tool achieves to transmit
nondestructive photos, video and files quickly, without the need for Internet
connections. A speed 100x faster than Bluetooth, see OPPO Share.
Data transfer is hassle free.
Without cables and network connections, your full contact list, extensive
photo gallery and downloaded apps will be copied from phone to phone in
just easy four steps. View more using details in Clone Phone.
Enjoy every smooth and responsive slide.
Page 12
ColorOS 3.1 brings greater speeds than ever. It not only gives quicker and
smoother reactions to every action, from launching apps to loading the
biggest games, it does so at a phenomenal pace. With the upgraded and
optimized interfaces, you will experience a 23.9% faster speed than ColorOS
3.0, as quick as a blink.
Easy to use.
ColorOS 3.1 brings you many amazing features that not only sound beautiful,
but work beautifully.
Protect your eyes.
You will experience intimate cares when reading. By turning on the night
shield eye protection mode, the screen filters blue light, changing the screen
to a color temperature and automatically adjusting the brightness strength to
ensure you to see the world as clearly and vibrantly as we do. There’s no need
to worry about eye strain any more. See Nightly Shield.
Multiple modes with easy access.
ColorOS 3.1 lets you set multiple modes to fulfil your personal needs. The
split screen mode allows you to work with a second app with the other one
remained active. Now you can watch a movie and chat with friends at the
same time. See Split-screen.
Page 13
Long screenshot.
Long screenshot allows you to take long screenshots of your conversations
on any messenger or the screenshot of a full web page, or screenshot of
some long app on your phone. Press and hold the Power and Volume Up
buttons for a few seconds to start capturing long screenshots. ColorOS 3.1
supports to take long screenshots up to 40 pages.
Security
ColorOS 3.1 is set to protect each of your actions, your files and even your
children. A series of advanced technologies are coming out to protect your
privacy and security. View more details in What's new in ColorOS 3.1.
Secure Keyboard. When you enter sensitive information such as passcode,
the system will automatically switch to use OPPO Secure Keyboard to protect
your input content from leaking out.
Page 14
Upgraded File Safe. Add in file categories. At a glance, you will find whatever
you want.
App Permissions &App Encryption. You can monitor apps’
Page 15
background behaviors, and encrypt apps to protect from prying eyes.
Kids Space. It does a good job in charge preventing, system modification
prohibiting and addiction preventing for kids.
Page 16
Call blocker. Effectively identify and intercept harassing calls.
Paying safely. As long as you make purchases online, ColorOS 3.1 will
ensure the safety of your mobile transactions.
Page 17
Changing language. Lock screen passcode is required when switching to
other languages.
Managing notifications. You can choose to display notifications on lock
screen or not, and customize them as you like.
Malicious chargeback. You will get alerts when there is any malicious theft of
your money in the background.
Beautiful, as you are.
Vitality is the beauty's content, while order is its form. Keeping up with the
current trends and mainstream aesthetics, we have redesigned the icons and
interfaces, and now, ColorOS 3.1 is more beautiful, expressive and livelier than
ever. View more designs in What's new in ColorOS 3.1.
Vivid colors, much relaxing, much younger.
System icons have been recolored to become more vivid and lighthearted
with significantly improved color brightness and saturation.
Beauty of order makes clearer.
Fonts have been fine-tuned in sizes, points, and colors, thus everything
presented to you is just perfect. Contents are ordered in clear structures and
affiliations, at a glance, you can get the point.
Page 18
3.1.2. Applicable products and specs
R11
Height
154.5mm
Width
74.8mm
Thickness
6.8mm
Weight
About 150g(with BATT)
Operating System
ColorOS 3.1, based on Android 7.1
GPU
Adreno 512 GPU
RAM
4GB
Dimensions/Weight
Basic Parameters
Page 19
Storage
64GB (Expandable up to 256GB)
Battery
3000mAh(TYP)
Processor
Qualcomm SDM660
Display
Size
5.5 inches
Type
AMOLED
Colors
16 million colors
Touchscreen
Multi-touch, Capacitive Screen, Gorilla Glass 5
Brightness
430±10% (cd/m²)
Rear Sensor
20-megapixel,16-megapixel
Front Sensor
20-megapixel
Flash
LED Flash
Aperture
Rear: 20M(f/2.6)+16M(f/1.7) Front: f/2.0
Frequencies
2G:GSM 850/900/1800/1900
3G:WCDMA 850/900/1700/1900/2100 MHz
4G:FDD B1/3/4/5/7/8/20/28
TDD
Camera
Connectivity
Page 20
B38/39/40/41
SIM Card Type
Dual Nano-SIM Cards
GPS
Supported
Bluetooth
4.2
Wi-Fi
2.4/5GHz 802.11 a/b/g/n/ac
OTG
Supported
NFC
No
Sensors
G-sensor
E-compass
Gyro-Sensor
Light and Proximity Sensor
OPPO R11
Earphones
Micro USB cable
VOOC Flash Charger mini
SIM Card Tool
Quick Guide
Case
In the Box
Page 21
ImportantInfo.BookletwithWarranty
Card
Applications
Height
148.1mm
Width
73.8mm
Thickness
7.6mm
Built-in applications: Developed by OPPO, these applications can ensure your
phone to function properly, and cannot be removed.
Third-party built-in applications: Developed by third-party companies and
handpicked by OPPO, these applications are safe and with high utilization,
and can be removed.
_
Dimensions/Weight
A71
Page 22
Weight
About 137g(with BATT)
Basic Parameters
Operating System
ColorOS 3.1, based on Android 7.1
GPU
Mali-T860 MP2
RAM
3GB
Storage
16GB (Expandable up to 256GB)
Battery
2900/3000mAh(Min/Typ)
Processor
MT6750,Octa-core
Size
5.2 inches
Type
TFT
Colors
16 million colors
Touchscreen
Multi-touch, Capacitive Screen, Gorilla Glass 5
Resolution
HD (1280 by 720 pixels)
Rear Sensor
13-megapixel
Front Sensor
5-megapixel
Flash
LED Flash
Aperture
Rear: f/2.2 Front: f/2.4
Display
Camera
Page 23
Connectivity
Frequencies
2G:Band 2/3/5/8
3G: Band 1/5/8
4G: Band 1/3/5/7/8/38/40/41
SIM Card Type
Dual Nano-SIM Cards
GPS
Supported
Bluetooth
4.0
Wi-Fi
2.4/5GHz 802.11 a/b/g/n/ac
OTG
Supported
NFC
No
G-sensor
E-compass
Light and Proximity Sensor
OPPO A71
Earphones
Micro USB cable
Charger
Sensors
In the Box
Page 24
SIM Card Tool
Quick Guide
Case
ImportantInfo.BookletwithWarranty
Card
Applications
Built-in applications: Developed by OPPO, these applications can ensure your
phone to function properly, and cannot be removed.
Third-party built-in applications: Developed by third-party companies and
handpicked by OPPO, these applications are safe and with high utilization,
and can be removed.
3.1.3.Buttons and components
Page 25
R11 features
A.
Front camera
B.
Receiver
C.
Sleep/Wake button
D.
Volume up button
E.
Volume down button
F.
Menu button
G.
Home button
H.
Return button
I.
Rear cameras
J.
Flash
K.
SIM card tray
L.
SIM tray hole
M.
Noise cancelling microphone
Page 26
N.
Speaker
O.
Micro-USB port
P.
Microphone
Q.
Headset jack
Functions for buttons and combination keys
To learn more features, see Quick Look at OPPO phone.
Control Center
Swipe up from the bottom edge of the screen to open control center, which
gives you easy access to Wi-Fi, Mobile data, Bluetooth, GPS, OPPO Share,
Nightly Shield, Flashlight, Calculator, Clock and camera. You can also use it to
adjust the brightness, boost your phone, disable Bottom keys and go to
settings. If you want to change or rearrange the shortcuts, or add other
shortcuts, swipe right and click “More”.
Page 27
Notification center
Swipe down from the top edge of the screen to open notification center,
which brings all your information into one location, and allows you to
manage all the alerts from different apps. Press a notification to respond to it,
or swipe a notification left for settings or deleting it.
Page 28
3.1.4. Sleep/Wake button
The Wake/Sleep button on the right side of your phone has a number of
different uses.
Page 29
When R11 is on
Wake or lock the screen: With the phone powered on, press the
Wake/Sleep button once will wake the phone up to the point that you can
see the lock screen, like the clock and any notifications that are setup to
display there.
When the phone screen is wakened, press this button will blacken the screen
and lock the phone.
Take a screenshot: Press and hold the Sleep/Wake and Volume Down
buttons at the same time, your phone will take a picture of whatever was
displayed on the screen. The image is saved in the Photos app.
Take a long screenshot: Press and hold the Sleep/Wake and Volume Up
Page 30
buttons at the same time, your phone will capture a long screenshot.
End a call: Go to [Settings] > [Additional Settings] > [Accessibility] and
turn on [Power Button Ends Call], then you can press the Sleep/Wake
button to end phone calls.
Turn off the phone: Press and hold the Sleep/Wake button for a few
seconds, whether the phone is on the lock screen or home screen, it will ask
you to slide down to power off the device.
Force restart the phone: Press and hold the Sleep/Wake and Volume Up
buttons for at least 5 seconds until your device is turned on to force restart
your phone.
When R11 is off
Turn on the phone: Press and hold the Sleep/Wake button for a few
seconds, and the phone will turn on.
Force restart the phone: Press and hold the Sleep/Wake and Volume Up
buttons until your device is turned on to force restart your phone.
Enter Recovery Mode: Press and hold the Sleep/Wake and Volume Down
buttons at the same time to enter Recovery Mode.
Page 31
3.1.5. Menu, Home and Return buttons
The three buttons at the bottom of your phone make it easy to learn and use
your OPPO R11.
Menu button
The Menu button on the bottom left would bring up a menu for apps that
you were in, and helps to enter Split-screen mode.
See the applications you’ve opened: Click Menu, then swipe left or right.
Close and lock the applications: Click Menu, and you can close all the
opened apps with one-click. If you want to close a specific app, swipe it up.
To lock an app, swipe it down. Swipe the app down again to unlock it.
Page 32
Enter split-screen mode: Go to [Settings] > [Additional Settings] and turn
on Split-screen, then open an app. Under the interface of the app, press and
hold Menu and select the other split-screen app. Now your screen will be
divided into two areas, which each area shows a different scene at the same
time.
* Notice: Both apps need to support Split-screen function. Your phone will alert you
if the app doesn’t support that.
Home button
Use the Home button to control your R11 outside of the onscreen controls.
Unlock the phone: Add a fingerprint to unlock your phone. Before you can
Page 33
add a fingerprint, you need to create a passcode for your OPPO phone. Go to
[Settings] > [Fingerprint & Passcode] for settings, then you can use the
fingerprint to unlock your phone instead of the lock screen passcode, make
purchases and use it for [App Encryption] and [File Safe], just put your
finger on the Home button for recognition.
Go to the Home screen: Press the Home button at any time to see your
phone applications. Click any application icon to get started. If you are
already on the Home Screen, click the Home button will take you to the very
first page of icons.
Use Google: Press and hold the Home button to use Google for Web
searching.
Wake up screen: Go to [Settings] > [Gesture & Motion] > [Screen-off
Gestures] and turn on [Dbl Tap Fingerprint Button for Screen-on], then
you can wake up your locked screen with a double-click on the Home button.
* Notice: This function is only effective when the fingerprint sensor is turned off.
Return button
Go back to the previous page: Click Return at any time you want to go back
to the previous page. If you are already on the main interface of an app, click
Return will quit this app.
Page 34
3.1.6.Volume buttons
Volume buttons give you easy access to adapt over time to a proper volume
of sound. It refers not simply ringer or media, R11 also keeps track of the
volume level separately in headphone, microphone and speaker.
Media volume: When listening to music, videos and phone calls, use the
buttons on the side of the phone to adjust the volume. For information about
avoiding hearing loss, see Security Information.
Page 35
Ringer volume: You can also use the volume buttons to control the volume
for the ringer and alerts. When you press and hold the volume down button,
your phone will switch to silent mode.
Call volume: When making or receiving phone calls, use the volume buttons
to adjust the volume of the call.
* You can also adjust the volume (except call volume) in [Settings] > [Sound &
Vibration].
Controlling the camera: Volume buttons can also be used to control your
camera. Go to [Settings] > [Camera] > [Volume Button] and set up the
volume buttons for Shutter or Zoom.
3.1.7. Micro-USB port
R11's Micro-USB port is the connector on the bottom of your device where
your battery charger connects. It also doubles as the data port, which lets you
transfer data to and from a personal computer. Plug the cable in the port to
charge or transfer data.
Page 36
Notice:
1. Repeated connecting and disconnecting of your cable can cause the port
to wear out, resulting in a poor connection to your cable.
2. Never force a connector into the port, for that might cause damage.
3.1.8. Headset jack
The headset jack is an audio socket that accepts a 3.5mm audio plug. Plug
your headset in the jack to listen to music, videos and phone calls. Do not
force a mismatched headset into the jack for that might cause damage.
Page 37
3.1.9. SIM and SD cards
SIM card
* Insert the SIM card before turning on your phone. If you hold a new SIM card, you
might need to wait until it is activated by the carrier before you can use it.
A SIM card is provided by your carrier and is used to activate your phone's
mobile network. Because it has a small amount of memory, the SIM card not
only enables communications between two persons, but stores information
such as phone numbers, security data and more. When using the mobile
network, you need to pay charges. To avoid high charges, you can shop data
plans with your carrier, or shop international data roaming plans when
traveling abroad.
Insert the SIM card: Most OPPO Smartphones support Dual SIM. You can
Page 38
choose to insert one or two.
1. Insert the card needle into the hole outside the card tray to pop it open.
2. Pull out the card tray and place SIM card(s) on it.
3. Put the card tray back in as the same orientation that you removed it.
Remove the SIM card: Remove the card(s) in the same way that you insert
it(them).
SD card
The SD card is a way to store and transfer images, music, video and other
data. You can insert a SD card in your phone to expand phone’s memory.
SIM1, SIM2 and SD cards share the same card tray. Insert your SD card in the
Page 39
same way that you insert the SIM card(s).
3.1.10. Accessories came with OPPO phone
Here are accessories came with your OPPO R11.
Headset: An American standard headset with 3.5 mm headset plug. Use to
listen to music, videos, and phone calls. Use the built-in microphone to talk.
When playing the music or videos, click the button once to pause or play a
song or video.
VOOC Connecting cable: Use the cable to connect your phone to the
computer to charge and transfer files, or use it with the power adapter to
charge.
Page 40
VOOC Power adapter: Connect the power adapter to your phone using the
included cable, then plug it into a standard power outlet to charge the
phone.
SIM card tool: Use to pop out the SIM card tray.
Phone Case: Use to protect against drops and shock damage on the corners
and rear of your phone.
Page 41
3.1.11. Charging the battery
OPPO R11 comes with the VOOC flash charging technology, offering 4x
faster charging than conventional chargers. A five-minute charge allows R11
to support a two-hour call. A thirty-minute charge gets R11 to 75% of full
battery. VOOC flash charging system will make your phone ready to go when
you are on your way.
How to charge the battery:
Page 42
Charge with the jack: Connect the VOOC adapter to your phone using the
VOOC cable, then plug it into a standard power outlet to flash charge the
phone.
Connect to a computer to charge: Use the cable to connect your phone to
the computer to charge. Your phone will charge slowly if you connect it to
the computer, and VOOC flash charge is not available.
Charge with VOOC Power Bank: Connect the VOOC Power Bank to your
phone, and your phone will be flash charged wherever you go. It is an
absolute necessity if you are a frequent traveler.
Charging Notice:
Page 43
1. Charge the phone with the original VOOC charging accessories (including
VOOC adapter, cable and power bank). Your phone will not be flash charged
if you use a single VOOC accessory or other third-party accessories.
2. Do not use VOOC flash charger on other phones. The charger is able to
detect whether or not the device is VOOC compatible, and will supply the
correct current.
3. Phone won’t be flash charged when the battery level is higher than 85% or
lower than 1%.
4. Charge your phone in a place where the temperature is always between
15 C to 40 C. Extreme ambient temperatures will affect flash charging
system.
3.1.12. Gesture & Motion
Gestures
OPPO smartphone is designed to understand gestures. You can use gestures
such as tap, swipe, drag and spread to operate your phone.
Page 44
To set up complex gestures for specific functions, go to [Settings] >
[Gesture & Motion].
Screen-off Gestures
To set up screen-off gestures, you need to turn it on first.
Page 45
Double tap fingerprint button for screen-on: Turn it on to wake up your
locked screen with a double-click on the Home button. This function is only
effective when the fingerprint sensor is turned off.
Double tap to turn screen on: Turn it on to wake up your locked screen with
a double-click on the screen.
Draw O to start camera: When turn it on, you can draw O on the locked
screen to open Camera app.
Draw V to open torchlight: When turn it on, you can draw V on the locked
screen to open the torchlight.
Music control: When turn it on, you can draw ‖ to pause/play a track, or
draw < or > to switch the track when the screen is off.
Add more screen-off gestures: OPPO smartphone of ColorOS 3.1 gives you
7 options, which are Draw ^, Slide up, Slide down, Slide left, Slide right,
Draw M and Draw W. Choose one to unlock the phone, call someone or start
an app.
Page 46
Screenshot Gesture
When turn it on, you can take a screenshot by swiping the screen up or down
with three fingers.
Page 47
Motion
The motion-sensing technology is used in OPPO smartphone. Use it to let
your phone response to motion.
Smart call
Auto call when near the ear: Before you can use auto call, you need to set
the default SIM card for calling. Go to a contact detail, call detail, message
conversation or info interface, put the phone near your ear and your phone
will automatically call that specific person.
Auto answer when near the ear: This function lets your phone to answer any
incoming calls automatically when putting the phone near your ear.
Switch to receiver for calls: Use it to automatically switch from speaker to
receiver when you put the phone near your ear during phone calls.
Flip to mute incoming calls: Use it to silence the ringer by turning the phone
over on a table or other flat surfaces.
Page 48
Touch-disable mode
Turn it on to prevent incorrect operations if the lock screen is covered.
Take selfies
Open Camera app and switch to the front camera. Click> Palm on the top
of the screen. Pose the same hand gesture towards the camera, once the
camera captures that, it will take a photo automatically after two seconds.
You can change your pose and expression within this two seconds.
Page 49
3.1.13. Key combinations
Generally, you can use two buttons of your phone to generate a specific
result. The common key combinations include:
When phone is on
Press and hold the Power and Volume Down buttons: Your phone will take
a screenshot for the current page.
Press and hold the Power and Volume Up buttons:
Page 50
1. Capture long screenshots: About 2 seconds, your phone will be ready to
capture a long screenshot. Click [Page-down] to scroll to the next page,
continue to click Page-down until you want to stop capturing, then click
[Save] to generate a long screenshot.
2. Force restart your phone: Press and hold the two buttons for at least 8
seconds until your smartphone is restarted.
Press and hold the Volume Up and Down buttons: Quit Talkback app
temporarily.
Page 51
When phone is off
Press and hold the Power and Volume Down buttons: Phone will enter
Recovery Mode, which does help to update the system, wipe data, check disk
and more.
Page 52
Press and hold the Power and Volume Up buttons: Phone will be force
Status icon
What it means
Mobile network signal
Shows whether you’re in range of operator’s
restarted. Press and hold the two buttons until your phone is turned on.
3.1.14. Status Icons
The icons in the status bar at the top of the screen give information about
your OPPO smartphone:
Page 53
network and can make and receive calls. The
more bars, the stronger the signal.
Airplane Mode
Shows that airplane mode is on. Phone’s
wireless communication abilities are disabled.
/
LTE/ LTE – A
4G network is available, including LTE and
LTE-A. Your phone can connect to the Internet
over that network.
/
UMTS/WCDMA
3G UMTS network is available. Your phone
can connect to the Internet over that network.
EDGE /GSM
EDGE (GSM) network is available. Your phone
can connect to the Internet over that network.
Wi-Fi
Shows that your phone is connected to a
Wi-Fi network. The more bars, the stronger
the signal. See Connect to Wi-Fi.
Call Forwarding
Call forwarding is turned on.
VPN
You’re connected to a network using VPN.
Quiet Time
Quiet Time is turned on.
Portrait orientation lock
Phone screen is locked in portrait orientation.
Alarm
An alarm is set up on your phone.
Page 54
Bluetooth
Bluetooth is on, or your phone is connected
to a Bluetooth device.
Bluetooth
Bluetooth Tethering is on.
Silent
Silent Mode is on.
HD Voice
Your operator’s VoLTE service is available. HD
Voice works to make your calls.
USB Debugging
USB Debugging is on. You can transfer files
via USB.
Wireless Display
Wireless projector is connected.
Location Service
Location Service is on.
No service
Your phone has no signal.
No SIM card
SIM card is not inserted. See About your SIM
card.
Page 55
3.2. Configure settings
3.2.1. Google account
A Google account is the key to accessing all of Google’s products and
services, such as Maps, Play Store, Voice Search, YouTube, and more. To sign
in your Google account and get the most out of Google, do the following:
Create and sign in your Google account. The first time you switch your
OPPO phone on, it will prompt you to sign in to Google. You can also create
or sign in your account in [Settings] > [Google] > [Sign-in & security], or in
any of the Google apps on your phone.
Page 56
Note: Your Google Account is hooked up with all the Google Services you
use. After you login to a Google app, other Google apps on your phone will
automatically login to the same account.
View apps with access to your account. Go to [Settings] > [Google] >
[Sign-in & security], scroll down and click Apps with access to your
account. If there’s an app or service that shouldn’t have access to your
account, you can revoke its privileges.
Sync the Google account. If you have your Google account configured, go to
[Settings] > [Accounts and Sync], click Google and you will see the sync
options. You can choose which parts of the service you would like to be
synced, then click Sync now to start syncing.
Page 57
Remove your Google account. Go to [Settings] > [Accounts and Sync],
click Google, then click Remove acct.
3.2.2. Fingerprint and Passcode
Setting a passcode and fingerprint on your OPPO phone are security
measures that all users should take. Follow these steps to set a passcode and
fingerprint that will be needed to unlock your phone and access the
information stored on it.
Use a passcode on your OPPO phone
Set the passcode
1. Go to [Settings] > [Fingerprint & Passcode], click [Turn on Passcode].
Page 58
2. You'll be prompted to draw a pattern. If you want to use other passcode
Click Custom Alphanumeric Code to use a passcode that contains
Click 4-Digit Numeric Code to use a numbers-only passcode that
types, see step 3.
3. Click [Other Encryptions]. You can choose from two types of passcodes:
numbers and/or letters as your preference.
contains four characters.
Page 59
4. Draw your pattern or enter your passcode.
5. Re-draw or re-enter your pattern or passcode to confirm it and activate it.
Change the passcode
1. Go to [Settings] > [Fingerprint & Passcode], click [Modify Passcode].
2. Draw or enter your current pattern or passcode.
3. Draw or enter your new pattern or passcode. If you want to use other
passcode types, click [Other Encryptions] at the bottom of the screen.
4. Re-draw or re-enter your pattern or passcode to confirm it and activate it.
Page 60
Turn off the passcode
Unlocking the phone from the lock screen.
Making purchases without entering a passcode.
Encrypting apps
Protecting files
1. Go to [Settings] > [Fingerprint & Passcode], click [Turn off Passcode].
2. Draw or enter your current pattern or passcode to confirm.
View more details in Set and use a passcode with your OPPO smartphone.
Use a fingerprint on your OPPO phone
Before you can add a fingerprint, you need to create a passcode for your
OPPO phone. You can use fingerprints for:
Add a fingerprint
1. Go to [Settings] > [Fingerprint & Passcode], click [Add a Fingerprint].
2. Follow the on-screen instructions, placing your finger gently on the Home
button until your fingerprint is recorded.
Page 61
3. Repeat step 1 and 2 for as many fingers as you like.
Delete or Rename a fingerprint
1. Go to [Settings] > [Fingerprint & Passcode], click the fingerprint you’ve
added.
2. Enter a name for your fingerprint, or click [Delete Fingerprint].
Page 62
View more details in Add and use a fingerprint on your OPPO Smartphone.
3.2.3. Set up other mail and calendar accounts
In addition to the apps that come with your phone, if you want to use other
mail and calendar apps, add the accounts to your phone to let the apps
associated with those accounts sync with your phone.
Set up an account. Go to [Settings] > [Accounts and Sync], then click [Add
Account].
Repeat the steps for as many accounts as you like.
Page 63
3.2.4. Transfer data from the old phone to OPPO
To support the whole backup process to complete, make sure the battery level
smartphone
Clone Phone can safely and rapidly transfer all the data including Personal
Data
(Contacts, Messages, etc.), System Data (System Settings, Clock, Weather Info,
etc.),
Applications (Applications and Application Data) and Files like Audios,
Videos,
Photos and Documents.
Before Clone Phone
of
Page 64
OPPO smartphone is over 50% and don’t turn off or restart your phone during
Progress and details will be displayed on your phone during the cloning
Your phone might get hot during the process as the processor is overloaded,
Keep your device close to the other to ensure the network connection between
the
backup process.
process.
which
generates heat.
two
Devices.
How to Clone Phone
Follow these steps to transfer your data from the old phone to the new
phone
easily and quickly:
From an Android Phone to an OPPO
Before Clone phone, you have to make sure Clone Phone is available on both