Onset Onset CX402-B2M Quickstart

Test Equipment Depot - 800.517.8431 - 5 Commonwealth Ave, MA 01801

Quick Start for the InTemp® CX400 Series Temperature Logger

- TestEquipmentDepot.com

Administrators: Set up an InTempConnect® account.

1

Set up the logger.

2

a. Install two AAA batteries in the logger, observing polarity.

Insert the battery door in the back of the logger making sure it
is flush with the rest of the logger case. Use the included screw
and a Phillips-head screwdriver to screw the battery door into
place.

b. Insert the external temperature probe (if applicable).

19995-J MAN-QSG-CX40x

Download the InTemp app and log in.

3

a. Download InTemp to a phone or tablet.
b. Open the app and enable Bluetooth® in

the device settings if prompted.

c. InTempConnect users: Log in with your InTempConnect user

credentials. Make sure to check the box that says “I am an

InTempConnect user” when signing in.
InTemp app only users: If you will not be using
InTempConnect, create a user account and log in when
prompted. DO NOT check the box that says “I am an
InTempConnect user” when signing in.

Configure the logger.

4

InTempConnect users: Configuring the logger requires privileges.

The logger includes preset profiles. Administrators or those with
the required privileges can also set up custom profiles (including
setting up daily logger checks) and trip information fields. This
should be done before configuring the logger. If you plan to use
the logger with the InTempVerify™ app, then you must create a
profile with InTempVerify enabled.

InTemp app only users: The logger includes preset profiles. To
set up a custom profile, tap the Settings icon and tap CX400
Logger. Also, if you need to perform daily logger checks, tap
Record CX400 Logger Checks under Settings and select Once
Daily or Twice Daily. This should be done before configuring the
logger.

(continued)

(continued)

4

a. Tap the Devices icon in the app. Find the logger in the list and

tap it to connect to it. If the logger does not appear, make sure
it is within range of your device.

b. Once connected, tap Configure. Swipe left and right to select a

logger profile. Type a name for the logger. Tap Start to load the
selected profile to the logger. InTempConnect users: If trip
information fields were set up, you will be prompted to enter
additional information. Tap Start in the upper right corner
when done. Note: You can also configure the logger from
InTempConnect via the CX5000 Gateway.

Deploy and start the logger.

5

Deploy the logger to the location where you will be monitoring
the temperature. Logging will begin based on the settings in the
profile selected. If the logger was configured to perform daily
checks, connect to the logger and tap Perform Check (Morning,
Afternoon, or Daily) every day.

© 2016–2020 Onset Computer Corporation. All rights reserved. Onset, InTemp, InTempConnect, and InTempVerify are trademarks or
registered trademarks of Onset Computer Corporation. App Store is a service mark of Apple Inc. Google Play is a trademark of Google
Inc. Bluetooth is a registered trademark of Bluetooth SIG, Inc. Bluetooth is a registered trademark of Bluetooth SIG, Inc. PDF
technology powered by PDFNet Mobi le SDK copyright © PDFTron™ Systems Inc., 2 001–2016, and distributed by Onset Com puter
Corporation under license. All rights reserved. All other trademarks are the property of their respective companies.
Patent #: 8,860,569 19995-J MAN-QSG-CX40x

Download the logger.

6

Using the InTemp app, connect to the logger and tap Download. A
report is saved in the app Tap the Reports icon in the app to view and
share downloaded reports.

InTempConnect users: Privileges are required to download, preview,
and share reports in the app. Report data is automatically uploaded to
InTempConnect when you download the logger. Log in to
InTempConnect to build custom reports (requires privileges).

Note: You can also download the logger using the CX5000 Gateway or
the InTempVerify app.

WARNING: Do not cut open, incinerate, heat above 85°C (185°F), or recharge the

lithium battery. The battery may explode if the logger is exposed to extreme heat or
conditions that could damage or destroy the battery case. Do not dispose of the logger
or battery in fire. Do not expose the contents of the battery to water. Dispose of the
battery according to local regulations for lithium batteries.